Paper Abrasive Belts
from R. S. Hughes Company, Inc.
3M coated 202DZ sanding belt uses aluminum oxide as the abrasive material. 3M incorporates this aluminum oxide material into the sanding belt forming a grit of P120. This particular 3M sanding belt is 2 in wide by 103 in long. [See More]
- Backing: Cloth; Paper
- Width: 2.00
- Belt Type: Nonwoven
- Length: 103.0
from TFC Ltd.
Material: Aluminium Oxide. Size: 150 x 2000mm - 200 x 300mm. Grit Range: 16 - 800 [See More]
- Backing: Paper
- Length: 78.7
- Width: 5.91
- Type: Aluminum Oxide
from Uneeda Enterprizes, Inc.
AEKM is an aluminum oxide grain with a stearate coating. The stearation reduces clogging which contributes to the surface finish. It has been specifically designed to sand UV lacquers. AEKM is best used with minimal sanding pressure and a low belt speed. Grain: Aluminum Oxide. Backing: E Weight... [See More]
- Backing: Paper; E Weight Paper
- Grit Size: 180 to 500
- Type: Aluminum Oxide
from Gesswein Co., Inc.
Aluminum oxide abrasive belts specially made for use with our Power Hand BZX Belt Sander. 6 and 8mm belts fit on either straight or 45 ° angle arms. [See More]
- Backing: Paper
- Width: 4.00
- Belt Type: Bench, Pedestal or Backstand
- Type: Aluminum Oxide
from R. S. Hughes Company, Inc.
3M coated 251U sanding belt uses aluminum oxide as the abrasive material. 3M incorporates this aluminum oxide material into the sanding belt forming a grit of P100. This particular 3M sanding belt is 43 in wide by 75 in long. [See More]
- Backing: Paper
- Width: 43.00
- Belt Type: Nonwoven
- Length: 75.0
from Uneeda Enterprizes, Inc.
AESM is specifically designed to meet the demands of sealer sanding. It is a Silicon Carbide product with a flexible paper backing and a specially designed bonding system. This system allows the product to provide excellent sanding efficiency. It is treated with a stearate coating which dramatically... [See More]
- Backing: Paper; E Weight Paper
- Grit Size: 240 to 1000
- Type: Silicon Carbide
from R. S. Hughes Company, Inc.
3M coated 251U sanding belt uses aluminum oxide as the abrasive material. 3M incorporates this aluminum oxide material into the sanding belt forming a grit of P220. This particular 3M sanding belt is 52 in wide by 75 in long. [See More]
- Backing: Paper
- Width: 52.00
- Belt Type: Nonwoven
- Length: 75.0
from Uneeda Enterprizes, Inc.
AESMNS is used for belt sanding and other applications where a silicon carbide product is needed. Grain: Silicon Carbide. Backing: E Weight Paper. Bonding: Resin over Resin. Top Coating: Anti-static. Coating: Closed. Color: Black. Grit Range: P240- P800 [See More]
- Backing: Paper; E Weight Paper
- Grit Size: 240 to 800
- Type: Silicon Carbide
from R. S. Hughes Company, Inc.
3M coated 363UZ sanding belt uses aluminum oxide as the abrasive material. 3M incorporates this aluminum oxide material into the sanding belt forming a grit of P220. This particular 3M sanding belt is 36 in wide by 75 in long. [See More]
- Backing: Paper
- Width: 36.00
- Belt Type: Nonwoven
- Length: 75.0
from Uneeda Enterprizes, Inc.
ARKFEO material was created with soft or resinous woods in mind. Soft woods have a high resin content, which leads to build up on the abrasive material. For these woods, ARKFEO has been developed with an extra open coat. To get the best results from ARKFEO a low sanding pressure should be applied. [See More]
- Backing: Paper; F Weight Paper
- Grit Size: 40 to 100
- Type: Aluminum Oxide
from R. S. Hughes Company, Inc.
3M coated 363UZ sanding belt uses aluminum oxide as the abrasive material. 3M incorporates this aluminum oxide material into the sanding belt forming a grit of P80. This particular 3M sanding belt is 6 in wide by 425 1/8 in long. [See More]
- Backing: Paper
- Width: 6.00
- Belt Type: Nonwoven
- Length: 425.1
from Uneeda Enterprizes, Inc.
ARKFO is a versatile material for most types of wood. This material combines the ability for significant stock removal as well as producing excellent surface finishes. To get the most out of ARKFO minimal sanding pressure should be used. This will give less raised fibers and an even finish. Grain:... [See More]
- Backing: Paper; F Weight Paper
- Grit Size: 120 to 220
- Type: Aluminum Oxide
from R. S. Hughes Company, Inc.
3M coated 364UZ sanding belt uses aluminum oxide as the abrasive material. 3M incorporates this aluminum oxide material into the sanding belt forming a grit of 80. This particular 3M sanding belt is 42 in wide by 75 in long. [See More]
- Backing: Paper
- Width: 42.00
- Belt Type: Nonwoven
- Length: 75.0
from Uneeda Enterprizes, Inc.
ARSFEO was designed with Pine and Spruce wood species in mind. Both these species have a high resin content and various degrees of hardness through out the work piece. Using ARSFEO will provide an even finish, which will minimize the cost of surface treatment. Whether used alone or in combination... [See More]
- Backing: Paper; F Weight Paper
- Grit Size: 80 to 150
- Type: Silicon Carbide
from R. S. Hughes Company, Inc.
3M coated 364UZ sanding belt uses aluminum oxide as the abrasive material. 3M incorporates this aluminum oxide material into the sanding belt forming a grit of P100. This particular 3M sanding belt is 52 in wide by 103 in long. [See More]
- Backing: Paper
- Width: 52.00
- Belt Type: Nonwoven
- Length: 103.0
from Uneeda Enterprizes, Inc.
ARSFO is a very durable product ideal for wide and narrow belt sanding. This product will produce an even finish, which will minimize the cost of surface treatment. Grain: Silicon Carbide. Backing: F Weight Paper. Bonding: Resin over Resin. Top Coating: Stearated, Anti-static. Coating: Closed. [See More]
- Backing: Paper; F Weight Paper
- Grit Size: 180 to 240
- Type: Silicon Carbide
from R. S. Hughes Company, Inc.
3M coated 364UZ sanding belt uses aluminum oxide as the abrasive material. 3M incorporates this aluminum oxide material into the sanding belt forming a grit of P120. This particular 3M sanding belt is 36 in wide by 75 in long. [See More]
- Backing: Paper
- Width: 36.00
- Belt Type: Nonwoven
- Length: 75.0
from Uneeda Enterprizes, Inc.
Products > Narrow Sanding Belts > Narrow Sanding Belts for Woodworking > EKA1000 [See More]
- Backing: Paper; Grit #50 - #220 F-Weight PaperGrit #240 - #320, #400 E-Weight Paper
- Grit Size: 40 to 1000
- Type: Aluminum Oxide
from R. S. Hughes Company, Inc.
3M coated 366UZ sanding belt uses aluminum oxide as the abrasive material. 3M incorporates this aluminum oxide material into the sanding belt forming a grit of P150. This particular 3M sanding belt is 4 in wide by 274 in long. [See More]
- Backing: Paper
- Width: 4.00
- Belt Type: Nonwoven
- Length: 274.0
from Uneeda Enterprizes, Inc.
RKEO is a heavy duty paper product primarily used in the flooring industry as well as Automotive/ Marine. Because of the durability of this product, it can level uneven floor surfaces without tearing easily. Grain: Aluminum Oxide. Backing: E Weight Paper. Bonding: Resin over Resin. Coating:... [See More]
- Backing: Paper; E Weight Paper
- Grit Size: 40 to 240
- Type: Aluminum Oxide
from R. S. Hughes Company, Inc.
3M coated 461UZ sanding belt uses silicon carbide as the abrasive material. 3M incorporates this silicon carbide material into the sanding belt forming a grit of P120. This particular 3M sanding belt is 50 in wide by 103 in long. [See More]
- Backing: Paper
- Width: 50.00
- Belt Type: Nonwoven
- Length: 103.0
from R. S. Hughes Company, Inc.
3M coated 466UZ sanding belt uses silicon carbide as the abrasive material. 3M incorporates this silicon carbide material into the sanding belt forming a grit of P150. This particular 3M sanding belt is 25 in wide by 60 in long. [See More]
- Backing: Paper
- Width: 25.00
- Belt Type: Nonwoven
- Length: 60.0
from R. S. Hughes Company, Inc.
3M coated 466UZ sanding belt uses silicon carbide as the abrasive material. 3M incorporates this silicon carbide material into the sanding belt forming a grit of P150. This particular 3M sanding belt is 50 in wide by 103 in long. [See More]
- Backing: Paper
- Width: 50.00
- Belt Type: Nonwoven
- Length: 103.0
from R. S. Hughes Company, Inc.
3M coated 466UZ sanding belt uses silicon carbide as the abrasive material. 3M incorporates this silicon carbide material into the sanding belt forming a grit of P180. This particular 3M sanding belt is 5 in wide by 83 in long. [See More]
- Backing: Paper
- Width: 5.00
- Belt Type: Nonwoven
- Length: 83.0
from R. S. Hughes Company, Inc.
3M Cubitron coated 763U sanding belt uses ceramic as the abrasive material. 3M incorporates this ceramic material into the sanding belt forming a grit of 60. This particular 3M sanding belt is 4 in wide by 132 in long. [See More]
- Backing: Paper
- Width: 4.00
- Belt Type: Nonwoven
- Length: 132.0
from R. S. Hughes Company, Inc.
3M Cubitron coated 966UZ sanding belt uses ceramic as the abrasive material. 3M incorporates this ceramic material into the sanding belt forming a grit of 80. This particular 3M sanding belt is 14 in wide by 190 in long. [See More]
- Backing: Paper
- Width: 14.00
- Belt Type: Nonwoven
- Length: 190.0
from R. S. Hughes Company, Inc.
3M Cubitron coated 966UZ sanding belt uses ceramic as the abrasive material. 3M incorporates this ceramic material into the sanding belt forming a grit of 80. This particular 3M sanding belt is 5 29/32 in wide by 172 13/64 in long. [See More]
- Backing: Paper
- Width: 5.91
- Belt Type: Nonwoven
- Length: 172.2
from R. S. Hughes Company, Inc.
3M Cubitron coated 966UZ sanding belt uses ceramic as the abrasive material. 3M incorporates this ceramic material into the sanding belt forming a grit of 80. This particular 3M sanding belt is 6 in wide by 301 in long. [See More]
- Backing: Paper
- Width: 6.00
- Belt Type: Nonwoven
- Length: 301.0
from R. S. Hughes Company, Inc.
3M(TM) Paper Belt 251U, 52 in x 103 in P180 E weight, 5 per case [See More]
- Backing: Paper
from R. S. Hughes Company, Inc.
3M(TM) Paper Belt 362UZ, 36 in x 75 in P100 F weight Filmlok, 5 per case [See More]
- Backing: Paper