Ceramic Abrasive Belts
from Norton Abrasives
NEW! Ceramic belts engineered for high-pressure and hard-to-grind materials. The sharp grain and improved H-wt. backing provide the greatest productivity and lowest abrasive cost striking a perfect balance of a premium ceramic grain with affordable performance. Key Materials. Carbon. Cast iron. [See More]
- Type: Ceramic
- Width: 2.00
- Belt Type: Bench, Pedestal or Backstand
- Length: 90.0
from RS Components, Ltd.
3M 947A 0060+ BLT 13x610MM [See More]
- Type: Ceramic; Ceramic
- Length: 24.0
- Width: 0.51
- Grit Size: 60
from Norton Abrasives
100% patented SG (Seeded Gel) ceramic alumina abrasive for longest life, more consistent finish and a cut so aggressive you can flatten the floor using one or twos finer than any other belt [See More]
- Type: Ceramic
- Length: 19.0
- Width: 8.00
- Grit Size: 80
from RS Components, Ltd.
3M 947A 0080+ BLT 13x610MM [See More]
- Type: Ceramic; Ceramic
- Length: 24.0
- Width: 0.51
- Grit Size: 80
from Norton Abrasives
100% patented SG (Seeded Gel) ceramic alumina abrasive for longest life, more consistent finish and a cut so aggressive you can flatten the floor using one or twos finer than any other belt [See More]
- Type: Ceramic
- Length: 19.0
- Width: 8.00
- Grit Size: 60
from RS Components, Ltd.
3M 947A 0060+ BLT 13x610MM [See More]
- Type: Ceramic; Ceramic
- Length: 24.0
- Width: 0.51
- Grit Size: 60
from Norton Abrasives
100% patented SG (Seeded Gel) ceramic alumina abrasive for longest life, more consistent finish and a cut so aggressive you can flatten the floor using one or twos finer than any other belt [See More]
- Type: Ceramic
- Length: 19.0
- Width: 8.00
- Grit Size: 36
from RS Components, Ltd.
3M 947A 0080+ BLT 13x610MM [See More]
- Type: Ceramic; Ceramic
- Length: 24.0
- Width: 0.51
- Grit Size: 80
from Norton Abrasives
100% patented SG (Seeded Gel) ceramic alumina abrasive for longest life, more consistent finish and a cut so aggressive you can flatten the floor using one or twos finer than any other belt [See More]
- Type: Ceramic
- Length: 19.0
- Width: 8.00
- Grit Size: 24
from Norton Abrasives
100% patented SG (Seeded Gel) ceramic alumina abrasive for longest life, more consistent finish and a cut so aggressive you can flatten the floor using one or twos finer than any other belt [See More]
- Type: Ceramic
- Length: 19.0
- Width: 8.00
- Grit Size: 100
from Norton Abrasives
Norton SG Blaze R980 Backstand Belt [See More]
- Type: Ceramic
- Width: 3.00
- Belt Type: Bench, Pedestal or Backstand
- Length: 132.0
from Norton Abrasives
Norton SG Blaze R980 Backstand Belt [See More]
- Type: Ceramic
- Width: 3.00
- Belt Type: Bench, Pedestal or Backstand
- Length: 132.0
from Norton Abrasives
Norton SG Blaze R980 Backstand Belt [See More]
- Type: Ceramic
- Width: 3.00
- Belt Type: Bench, Pedestal or Backstand
- Length: 132.0
from Norton Abrasives
Norton SG Blaze R980 File Belt [See More]
- Type: Ceramic
- Width: 0.50
- Belt Type: Portable Grinder or File Belt
- Length: 12.0
from Norton Abrasives
Norton SG Blaze R980 File Belt [See More]
- Type: Ceramic
- Width: 0.50
- Belt Type: Portable Grinder or File Belt
- Length: 12.0
from Norton Abrasives
Norton SG Blaze R980 File Belt [See More]
- Type: Ceramic
- Width: 0.50
- Belt Type: Portable Grinder or File Belt
- Length: 12.0
from Norton Abrasives
Norton SG Blaze R980 File Belt [See More]
- Type: Ceramic
- Width: 0.50
- Belt Type: Portable Grinder or File Belt
- Length: 18.0
from Norton Abrasives
Norton SG Blaze R980 File Belt [See More]
- Type: Ceramic
- Width: 0.50
- Belt Type: Portable Grinder or File Belt
- Length: 18.0
from Norton Abrasives
Norton SG Blaze R980 File Belt [See More]
- Type: Ceramic
- Width: 0.50
- Belt Type: Portable Grinder or File Belt
- Length: 18.0
from Norton Abrasives
Norton SG Blaze R980 File Belt [See More]
- Type: Ceramic
- Width: 0.50
- Belt Type: Portable Grinder or File Belt
- Length: 24.0
from Norton Abrasives
Norton SG Blaze R980 File Belt [See More]
- Type: Ceramic
- Width: 0.50
- Belt Type: Portable Grinder or File Belt
- Length: 24.0
from Norton Abrasives
Norton SG Blaze R980 File Belt [See More]
- Type: Ceramic
- Width: 0.50
- Belt Type: Portable Grinder or File Belt
- Length: 24.0
from Norton Abrasives
Norton SG Blaze R980 File Belt [See More]
- Type: Ceramic
- Width: 0.75
- Belt Type: Portable Grinder or File Belt
- Length: 18.0
from Norton Abrasives
Norton SG Blaze R980 File Belt [See More]
- Type: Ceramic
- Width: 0.75
- Belt Type: Portable Grinder or File Belt
- Length: 18.0
from Norton Abrasives
Norton SG Blaze R980 File Belt [See More]
- Type: Ceramic
- Width: 0.75
- Belt Type: Portable Grinder or File Belt
- Length: 18.0
from Norton Abrasives
Norton SG Blaze R980 File Belt [See More]
- Type: Ceramic
- Width: 0.75
- Belt Type: Portable Grinder or File Belt
- Length: 20.5
from Norton Abrasives
Choose Norton SG BLAZE PLUS R980P Belts for the greatest productivty. Last 50% to 200% longer on mild and carbon steel, stainless, cobalt, chrome, inconel and titanium, and cuts 20% faster than the current generation of grinding belts. For use on portable file belt machines or portable belt sanders. [See More]
- Type: Ceramic
- Width: 0.12
- Belt Type: Portable Grinder or File Belt
- Length: 12.0
from Norton Abrasives
Norton SG ® R981 Belt [See More]
- Type: Ceramic; Seeded Gel Abrasive
- Width: 0.25
- Belt Type: Portable Grinder or File Belt
- Length: 24.0
from Norton Abrasives
Norton SG ® R981 Narrow Belt [See More]
- Type: Ceramic; Seeded Gel Abrasive
- Width: 2.00
- Belt Type: Bench, Pedestal or Backstand
- Length: 132.0
from Walter Surface Technologies
These coated abrasive belts use our exclusive Cyclone ™ Technology with a premium ceramic abrasive grain blend to provide an extremely aggressive removal rate and long working life. This means you can remove weld beads and finish surfaces faster, reducing cycle time and taking labor time and... [See More]
- Type: Ceramic
- Width: 1.50
- Belt Type: Portable Grinder or File Belt
- Length: 30.0
from R. S. Hughes Company, Inc.
3M coated 777F sanding belt uses ceramic as the abrasive material. 3M incorporates this ceramic material into the sanding belt forming a grit of P120. This particular 3M sanding belt is 4 in wide by 132 in long. [See More]
- Type: Ceramic
- Width: 4.00
- Belt Type: Nonwoven
- Length: 132.0
from TFC Ltd.
Material: Zirconium. Size: 6 x 610 - 20 x 520mm. Grit Range: 40 - 320 [See More]
- Type: Ceramic
- Length: 24.0
- Width: 0.24
- Grit Size: 40 to 320
from Uneeda Enterprizes, Inc.
JS997 is a product that supplies maximum cutting performance because of it's ceramic grain. It is a J weight polyester / cotton blend backed material with ceramic grain and is closed coat. The JS997 is top sized with grit of 60-120. This product is used for narrow sanding belts. Grain: Ceramic. [See More]
- Type: Ceramic
- Backing: Cloth; J Weight Poly Cotton Cloth
from R. S. Hughes Company, Inc.
3M coated 967F sanding belt uses ceramic as the abrasive material. 3M incorporates this ceramic material into the sanding belt forming a grit of 24. This particular 3M sanding belt is 1 in wide by 72 in long. [See More]
- Type: Ceramic
- Width: 1.00
- Belt Type: Nonwoven
- Length: 72.0
from Uneeda Enterprizes, Inc.
PS991 heavy stock removal in wet operation, with long life of ceramic grain. Grain: Ceramic. Backing: X-Y Weight Polyester Cloth. Bonding: Resin over Resin. Coating: Closed. Color: Maroon. Grit Range: 24 â €" 120. Waterproof [See More]
- Type: Ceramic
- Backing: Cloth; X-Y Weight Polyester Cloth
- Grit Size: 24 to 120
from R. S. Hughes Company, Inc.
3M coated 967F sanding belt uses ceramic as the abrasive material. 3M incorporates this ceramic material into the sanding belt forming a grit of 24. This particular 3M sanding belt is 2 in wide by 72 in long. [See More]
- Type: Ceramic
- Width: 2.00
- Belt Type: Nonwoven
- Length: 72.0
from Uneeda Enterprizes, Inc.
Products > Narrow Sanding Belts > Narrow Sanding Belts for Metalworking > PS992 [See More]
- Type: Ceramic
- Backing: Cloth; X-Y Weight Polyester Cloth
- Grit Size: 24 to 120
from R. S. Hughes Company, Inc.
3M coated 967F sanding belt uses ceramic as the abrasive material. 3M incorporates this ceramic material into the sanding belt forming a grit of 24. This particular 3M sanding belt is 3 in wide by 132 in long. [See More]
- Type: Ceramic
- Width: 3.00
- Belt Type: Nonwoven
- Length: 132.0
from R. S. Hughes Company, Inc.
3M coated 967F sanding belt uses ceramic as the abrasive material. 3M incorporates this ceramic material into the sanding belt forming a grit of 24. This particular 3M sanding belt is 6 in wide by 132 in long. [See More]
- Type: Ceramic
- Width: 6.00
- Belt Type: Nonwoven
- Length: 132.0
from R. S. Hughes Company, Inc.
3M coated 967F sanding belt uses ceramic as the abrasive material. 3M incorporates this ceramic material into the sanding belt forming a grit of 60. This particular 3M sanding belt is 3/4 in wide by 72 in long. [See More]
- Type: Ceramic
- Width: 0.75
- Belt Type: Nonwoven
- Length: 72.0
from R. S. Hughes Company, Inc.
3M coated 967F sanding belt uses ceramic as the abrasive material. 3M incorporates this ceramic material into the sanding belt forming a grit of 80. This particular 3M sanding belt is 10 in wide by 126 in long. [See More]
- Type: Ceramic
- Width: 10.00
- Belt Type: Nonwoven
- Length: 126.0
from R. S. Hughes Company, Inc.
3M coated 977F sanding belt uses ceramic as the abrasive material. 3M incorporates this ceramic material into the sanding belt forming a grit of 36. This particular 3M sanding belt is 6 in wide by 132 in long. [See More]
- Type: Ceramic
- Width: 6.00
- Belt Type: Nonwoven
- Length: 132.0
from R. S. Hughes Company, Inc.
3M coated 977F sanding belt uses ceramic as the abrasive material. 3M incorporates this ceramic material into the sanding belt forming a grit of 36. This particular 3M sanding belt is 9 in wide by 107 in long. [See More]
- Type: Ceramic
- Width: 9.00
- Belt Type: Nonwoven
- Length: 107.0
from R. S. Hughes Company, Inc.
3M Cubitron coated 707E sanding belt uses ceramic as the abrasive material. 3M incorporates this ceramic material into the sanding belt forming a grit of 80. This particular 3M sanding belt is 1 1/2 in wide by 60 in long. [See More]
- Type: Ceramic
- Width: 1.50
- Belt Type: Nonwoven
- Length: 60.0
from R. S. Hughes Company, Inc.
3M Cubitron coated 707E sanding belt uses ceramic as the abrasive material. 3M incorporates this ceramic material into the sanding belt forming a grit of 80. This particular 3M sanding belt is 1/2 in wide by 44 in long. [See More]
- Type: Ceramic
- Width: 0.50
- Belt Type: Nonwoven
- Length: 44.0
from R. S. Hughes Company, Inc.
3M Cubitron coated 707E sanding belt uses ceramic as the abrasive material. 3M incorporates this ceramic material into the sanding belt forming a grit of 80. This particular 3M sanding belt is 2 1/2 in wide by 132 in long. [See More]
- Type: Ceramic
- Width: 2.50
- Belt Type: Nonwoven
- Length: 132.0
from R. S. Hughes Company, Inc.
3M Cubitron coated 741A sanding belt uses ceramic as the abrasive material. 3M incorporates this ceramic material into the sanding belt forming a grit of 50. This particular 3M sanding belt is 4 in wide by 376 in long. [See More]
- Type: Ceramic
- Width: 4.00
- Belt Type: Nonwoven
- Length: 376.0
from R. S. Hughes Company, Inc.
3M Cubitron coated 741A sanding belt uses ceramic as the abrasive material. 3M incorporates this ceramic material into the sanding belt forming a grit of 50. This particular 3M sanding belt is 6 in wide by 345 in long. [See More]
- Type: Ceramic
- Width: 6.00
- Belt Type: Nonwoven
- Length: 345.0
from R. S. Hughes Company, Inc.
3M Cubitron coated 741A sanding belt uses ceramic as the abrasive material. 3M incorporates this ceramic material into the sanding belt forming a grit of 80. This particular 3M sanding belt is 1 in wide by 42 in long. [See More]
- Type: Ceramic
- Width: 1.00
- Belt Type: Nonwoven
- Length: 42.0
from R. S. Hughes Company, Inc.
3M Cubitron coated 741A sanding belt uses ceramic as the abrasive material. 3M incorporates this ceramic material into the sanding belt forming a grit of 80. This particular 3M sanding belt is 2 1/2 in wide by 60 in long. [See More]
- Type: Ceramic
- Width: 2.50
- Belt Type: Nonwoven
- Length: 60.0
from R. S. Hughes Company, Inc.
3M Cubitron coated 741E sanding belt uses ceramic as the abrasive material. 3M incorporates this ceramic material into the sanding belt forming a grit of 60. This particular 3M sanding belt is 1/2 in wide by 34 in long. [See More]
- Type: Ceramic
- Width: 0.50
- Belt Type: Nonwoven
- Length: 34.0
from R. S. Hughes Company, Inc.
3M Cubitron coated 741E sanding belt uses ceramic as the abrasive material. 3M incorporates this ceramic material into the sanding belt forming a grit of 60. This particular 3M sanding belt is 10 in wide by 168 in long. [See More]
- Type: Ceramic
- Width: 10.00
- Belt Type: Nonwoven
- Length: 168.0
from R. S. Hughes Company, Inc.
3M Cubitron coated 747D sanding belt uses ceramic as the abrasive material. 3M incorporates this ceramic material into the sanding belt forming a grit of 60. This particular 3M sanding belt is 36 in wide by 75 in long. [See More]
- Type: Ceramic
- Width: 36.00
- Belt Type: Nonwoven
- Length: 75.0
from R. S. Hughes Company, Inc.
3M Cubitron coated 763U sanding belt uses ceramic as the abrasive material. 3M incorporates this ceramic material into the sanding belt forming a grit of 60. This particular 3M sanding belt is 4 in wide by 132 in long. [See More]
- Type: Ceramic
- Width: 4.00
- Belt Type: Nonwoven
- Length: 132.0
from R. S. Hughes Company, Inc.
3M Cubitron coated 777F sanding belt uses ceramic as the abrasive material. 3M incorporates this ceramic material into the sanding belt forming a grit of 80. This particular 3M sanding belt is 3 in wide by 10 11/16 in long. [See More]
- Type: Ceramic
- Width: 3.00
- Belt Type: Nonwoven
- Length: 10.7
from R. S. Hughes Company, Inc.
3M Cubitron coated 900DZ sanding belt uses ceramic as the abrasive material. 3M incorporates this ceramic material into the sanding belt forming a grit of 80. This particular 3M sanding belt is 6 in wide by 181 in long. [See More]
- Type: Ceramic
- Width: 6.00
- Belt Type: Nonwoven
- Length: 181.0
from R. S. Hughes Company, Inc.
3M Cubitron coated 900DZ sanding belt uses ceramic as the abrasive material. 3M incorporates this ceramic material into the sanding belt forming a grit of P100. This particular 3M sanding belt is 3 in wide by 94 in long. [See More]
- Type: Ceramic
- Width: 3.00
- Belt Type: Nonwoven
- Length: 94.0
from R. S. Hughes Company, Inc.
3M Cubitron coated 900DZ sanding belt uses ceramic as the abrasive material. 3M incorporates this ceramic material into the sanding belt forming a grit of P120. This particular 3M sanding belt is 2 in wide by 146 in long. [See More]
- Type: Ceramic
- Width: 2.00
- Belt Type: Nonwoven
- Length: 146.0
from R. S. Hughes Company, Inc.
3M Cubitron coated 900DZ sanding belt uses ceramic as the abrasive material. 3M incorporates this ceramic material into the sanding belt forming a grit of P180. This particular 3M sanding belt is 12 in wide by 110 in long. [See More]
- Type: Ceramic
- Width: 12.00
- Belt Type: Nonwoven
- Length: 110.0