Aluminum Oxide Abrasive Belts
from Norton Abrasives
All Purpose Belt Job Pack [See More]
- Type: Aluminum Oxide
- Width: 3.00
- Belt Type: Portable Grinder or File Belt
- Length: 18.0
from RS Components, Ltd.
Multi Purpose Sanding Belt 220G [See More]
- Type: Aluminum Oxide; Aluminium Oxide
- Length: 21.0
- Width: 2.95
- Grit Size: 220
from Norton Abrasives
All Purpose Belt Job Pack [See More]
- Type: Aluminum Oxide
- Width: 3.00
- Belt Type: Portable Grinder or File Belt
- Length: 18.0
from RS Components, Ltd.
Multi Purpose Sanding Belt 240G [See More]
- Type: Aluminum Oxide; Aluminium Oxide
- Length: 28.1
- Width: 1.77
- Grit Size: 240
from Norton Abrasives
All Purpose Belt Job Pack [See More]
- Type: Aluminum Oxide
- Width: 3.00
- Belt Type: Portable Grinder or File Belt
- Length: 18.0
from RS Components, Ltd.
Set of 16 Sanding sheets for Multimaster [See More]
- Type: Aluminum Oxide; Aluminium Oxide
- Grit Size: 60 to 180
- Length: 5.1
from Norton Abrasives
All Purpose Belt Job Pack [See More]
- Type: Aluminum Oxide
- Width: 3.00
- Belt Type: Portable Grinder or File Belt
- Length: 21.0
from RS Components, Ltd.
Multitool sanding sheet 5xP60 [See More]
- Type: Aluminum Oxide; Aluminium Oxide
- Grit Size: 60
from Norton Abrasives
All Purpose Belt Job Pack [See More]
- Type: Aluminum Oxide
- Width: 3.00
- Belt Type: Portable Grinder or File Belt
- Length: 21.0
from RS Components, Ltd.
Multitool sanding sheet 5xP80 [See More]
- Type: Aluminum Oxide; Aluminium Oxide
- Grit Size: 80
from Norton Abrasives
All Purpose Belt Job Pack [See More]
- Type: Aluminum Oxide
- Width: 3.00
- Belt Type: Portable Grinder or File Belt
- Length: 24.0
from RS Components, Ltd.
Multitool sanding sheet 5xP120 [See More]
- Type: Aluminum Oxide; Aluminium Oxide
- Grit Size: 120
from Norton Abrasives
All Purpose Belt Job Pack [See More]
- Type: Aluminum Oxide
- Width: 3.00
- Belt Type: Portable Grinder or File Belt
- Length: 21.0
from RS Components, Ltd.
Multitool sanding sheet 5xP120 perforate [See More]
- Type: Aluminum Oxide; Aluminium Oxide
- Grit Size: 120
from Norton Abrasives
All Purpose Belt Job Pack [See More]
- Type: Aluminum Oxide
- Width: 3.00
- Belt Type: Portable Grinder or File Belt
- Length: 24.0
from RS Components, Ltd.
Grade 80 sanding belts for belt sanders [See More]
- Type: Aluminum Oxide; Aluminium Oxide
- Length: 13.0
- Width: 0.39
- Grit Size: 80
from Norton Abrasives
All Purpose Belt Job Pack [See More]
- Type: Aluminum Oxide
- Width: 3.00
- Belt Type: Portable Grinder or File Belt
- Length: 24.0
from RS Components, Ltd.
Grade 100 sanding belts for belt sanders [See More]
- Type: Aluminum Oxide; Aluminium Oxide
- Length: 13.0
- Width: 0.39
- Grit Size: 100
from Norton Abrasives
All Purpose Belt Job Pack [See More]
- Type: Aluminum Oxide
- Width: 4.00
- Belt Type: Portable Grinder or File Belt
- Length: 24.0
from RS Components, Ltd.
Grade 120 sanding belts for belt sanders [See More]
- Type: Aluminum Oxide; Aluminium Oxide
- Length: 13.0
- Width: 0.39
- Grit Size: 120
from Norton Abrasives
Bear-Tex ®Surface Finishing SCF Belt [See More]
- Type: Aluminum Oxide
- Width: 0.50
- Belt Type: Portable Grinder or File Belt; Bench, Pedestal or Backstand; Nonwoven
- Length: 18.0
from RS Components, Ltd.
ScotchBrite SC-BS A VFN 25/CTN 13x457 65 [See More]
- Type: Aluminum Oxide; Aluminium Oxide
- Length: 18.0
- Width: 0.51
from Norton Abrasives
Metalite ® R215 Wide Belt [See More]
- Type: Aluminum Oxide
- Width: 36.00
- Belt Type: Wide or Segmented Belt
- Length: 75.0
from RS Components, Ltd.
ScotchBrite SC-BS A MED 25/CTN 13x457 6 [See More]
- Type: Aluminum Oxide; Aluminium Oxide
- Length: 18.0
- Width: 0.51
from Norton Abrasives
Metalite ® R228 Narrow Belt [See More]
- Type: Aluminum Oxide
- Width: 1.00
- Belt Type: Bench, Pedestal or Backstand
- Length: 42.0
from RS Components, Ltd.
Scotch-Brite Belt DF-BL ACRS 13x610 [See More]
- Type: Aluminum Oxide; Aluminium Oxide
- Length: 24.0
- Width: 0.51
from Norton Abrasives
Metalite ® R283 Belt [See More]
- Type: Aluminum Oxide
- Width: 0.25
- Belt Type: Portable Grinder or File Belt
- Length: 24.0
from RS Components, Ltd.
120G Multi Purpose Sanding Belt 3 Pack [See More]
- Type: Aluminum Oxide; Aluminium Oxide
- Length: 28.1
- Width: 1.77
- Grit Size: 120
from Norton Abrasives
Metalite ® R283 Belt [See More]
- Type: Aluminum Oxide
- Width: 0.50
- Belt Type: Portable Grinder or File Belt
- Length: 12.0
from RS Components, Ltd.
40G Multi Purpose Sandpaper 10 Pack [See More]
- Type: Aluminum Oxide; Aluminium Oxide
- Length: 3.7
- Width: 3.66
- Grit Size: 40
from Norton Abrasives
Metalite ® R283 Belt [See More]
- Type: Aluminum Oxide
- Width: 0.50
- Belt Type: Portable Grinder or File Belt
- Length: 12.0
from RS Components, Ltd.
100G Multi Purpose Sanding Belt 3 Pack [See More]
- Type: Aluminum Oxide; Aluminium Oxide
- Length: 28.1
- Width: 1.77
- Grit Size: 100
from Norton Abrasives
Metalite ® R283 Belt [See More]
- Type: Aluminum Oxide
- Width: 0.50
- Belt Type: Portable Grinder or File Belt
- Length: 18.0
from RS Components, Ltd.
100G Multi Purpose Sanding Belt 10 Pack [See More]
- Type: Aluminum Oxide; Aluminium Oxide
- Length: 18.0
- Width: 2.95
- Grit Size: 100
from Norton Abrasives
Metalite ® R283 Belt [See More]
- Type: Aluminum Oxide
- Width: 0.50
- Belt Type: Portable Grinder or File Belt
- Length: 24.0
from RS Components, Ltd.
100G Multi Purpose Sanding Belt 10 Pack [See More]
- Type: Aluminum Oxide; Aluminium Oxide
- Length: 21.0
- Width: 2.95
- Grit Size: 100
from Norton Abrasives
Metalite ® R283 Belt [See More]
- Type: Aluminum Oxide
- Width: 0.75
- Belt Type: Portable Grinder or File Belt
- Length: 20.5
from RS Components, Ltd.
80G Multi Purpose Sandpaper 10 Pack [See More]
- Type: Aluminum Oxide; Aluminium Oxide
- Length: 3.7
- Width: 3.66
- Grit Size: 80
from Norton Abrasives
Norax ™ U242 X22 Benchstand Belt [See More]
- Type: Aluminum Oxide
- Width: 1.00
- Belt Type: Bench, Pedestal or Backstand
- Length: 42.0
from RS Components, Ltd.
40G Multi Purp Sanding Belt 3 Pack [See More]
- Type: Aluminum Oxide; Aluminium Oxide
- Length: 21.0
- Width: 2.95
- Grit Size: 40
from Norton Abrasives
Norax ™ U242 X22 Narrow Belt [See More]
- Type: Aluminum Oxide
- Width: 2.00
- Belt Type: Bench, Pedestal or Backstand
- Length: 132.0
from RS Components, Ltd.
150G Multi Purpose Sanding Belt 10 Pack [See More]
- Type: Aluminum Oxide; Aluminium Oxide
- Length: 21.0
- Width: 2.95
- Grit Size: 150
from Norton Abrasives
Premium aluminum oxide abrasive for fast initial cut rate [See More]
- Type: Aluminum Oxide
- Width: 3.00
- Belt Type: Portable Grinder or File Belt
- Length: 24.0
from RS Components, Ltd.
80G Multi Purpose Sanding Belt 10 Pack [See More]
- Type: Aluminum Oxide; Aluminium Oxide
- Length: 21.0
- Width: 2.95
- Grit Size: 80
from Norton Abrasives
Norton SG ® R981 Belt [See More]
- Type: Aluminum Oxide; Seeded Gel Abrasive
- Width: 3.50
- Belt Type: Portable Grinder or File Belt
- Length: 15.5
from RS Components, Ltd.
180G Multi Purpose Sandpaper 10 Pack [See More]
- Type: Aluminum Oxide; Aluminium Oxide
- Length: 3.7
- Width: 3.66
- Grit Size: 180
from Norton Abrasives
Norton Vortex: Reduce cycle times by 50+%. Skip 2 to 5 steps in technical blending operations. Features. New resin system, aerospace-tailored. Proprietary new coating method. Extended form holding. Improved hook and loop backing. Benefits. Smear-free, even on high nickel content alloys. Will not... [See More]
- Type: Aluminum Oxide
- Width: 0.25
- Belt Type: Portable Grinder or File Belt; Nonwoven
- Length: 18.0
from RS Components, Ltd.
60G Multi Purpose Sandpaper 10 Pack [See More]
- Type: Aluminum Oxide; Aluminium Oxide
- Length: 3.7
- Width: 3.66
- Grit Size: 60
from Norton Abrasives
Norton Vortex: Reduce cycle times by 50+%. Skip 2 to 5 steps in technical blending operations. Features. New resin system, aerospace-tailored. Proprietary new coating method. Extended form holding. Improved hook and loop backing. Benefits. Smear-free, even on high nickel content alloys. Will not... [See More]
- Type: Aluminum Oxide
- Width: 0.25
- Belt Type: Portable Grinder or File Belt; Nonwoven
- Length: 18.0
from RS Components, Ltd.
100G Multi Purpose Sandpaper 10 Pack [See More]
- Type: Aluminum Oxide; Aluminium Oxide
- Length: 3.7
- Width: 3.66
- Grit Size: 100
from Gesswein Co., Inc.
Aluminum oxide abrasive belts specially made for use with our Power Hand BZX Belt Sander. 6 and 8mm belts fit on either straight or 45 ° angle arms. [See More]
- Type: Aluminum Oxide
- Width: 4.00
- Belt Type: Bench, Pedestal or Backstand
- Grit Size: 80
from CS UNITEC
High-performance ceramic aluminum oxide grain. Increased removal rate and longest life for highest productivity. Excels in all metals. [See More]
- Type: Aluminum Oxide
- Width: 4.00
- Belt Type: Bench, Pedestal or Backstand
- Grit Size: 40
from TFC Ltd.
Material: Aluminium Oxide. Size: 6mm x 610mm – 20mm x 520mm. Grit Range: 40 - 120 [See More]
- Type: Aluminum Oxide
- Length: 20.5
- Width: 0.79
- Grit Size: 40 to 120
from Precision Surfacing Solutions
In today's technologically advanced world, there are a growing number of applications where conventional machining techniques just aren't accurate enough to meet precision surfacing requirements. Precision surfacing with abrasive media, a technology developed and refined by Lapmaster International... [See More]
- Type: Aluminum Oxide
- Length: 36.0
- Width: 4.00
- Grit Size: 50 to 240
from Uneeda Enterprizes, Inc.
531J Designed for general grinding. Grain: A/O. Backing: J Weight Twill Cloth. Bonding: Resin over Resin. Coating: Closed. Color: Maroon. Grit Range: 80 â €" 400 [See More]
- Type: Aluminum Oxide
- Backing: Cloth; J Weight Twill Cloth
- Grit Size: 80 to 400
from Reid Supply
Abrasive Belts sands virtually any industrial surface. . Made of Aluminium Oxide; X backing weight; Dimensions: 6.00 in W x 4.00 ft L. [See More]
- Type: Aluminum Oxide
- Width: 6.00
- Belt Type: Bench, Pedestal or Backstand
- Length: 48.0
from R. S. Hughes Company, Inc.
3M coated 202DZ sanding belt uses aluminum oxide as the abrasive material. 3M incorporates this aluminum oxide material into the sanding belt forming a grit of 80. This particular 3M sanding belt is 10 in wide by 13 3/4 in long. [See More]
- Type: Aluminum Oxide
- Width: 10.00
- Belt Type: Nonwoven
- Length: 13.8
from Flexovit USA, Inc.
X-Weight cotton cloth back belts with Mylar tape butt joint seam resists stretching and assures smooth bump free sanding. Premium aluminum oxide grain and full resin bonding keep the belt flexible and heated. (Below sizes and grits are available in zirconia and ceramic grain, call for details.). [See More]
- Type: Aluminum Oxide
- Width: 0.25
- Belt Type: Portable Grinder or File Belt
- Length: 24.0
from Weiler Abrasives
Constructed using a resin over resin bond that provides a stronger, heat and moisture resistant bond that better utilizes the abrasive grains. Cotton cloth provides a tougher, durable backing for longer life. J-flex cloth provides a higher degree of flexibility to conform to contoured parts. For use... [See More]
- Type: Aluminum Oxide
- Length: 8.9
- Width: 8.90
- Grit Size: 100
from CS UNITEC
For coarse and initial grinding, rust removal and smoothing round metal pipes. For use with grinding belt rollers. Can be used on closed pipe constructions. [See More]
- Type: Aluminum Oxide
- Width: 1.20
- Belt Type: Bench, Pedestal or Backstand
- Length: 24.0
from TFC Ltd.
Material: Aluminium Oxide. Size: 150 x 2000mm - 200 x 300mm. Grit Range: 16 - 800 [See More]
- Type: Aluminum Oxide
- Length: 78.7
- Width: 5.91
- Grit Size: 16 to 800
from Uneeda Enterprizes, Inc.
542JFF has a highly flexible backing. Grain: A/O. Backing: J Weight Twill Cloth. Bonding: Resin over Glue. Coating: Closed. Color: Maroon. Grit Range: 80 â €" 400 , 600 [See More]
- Type: Aluminum Oxide
- Backing: Cloth; J Weight Twill Cloth
- Grit Size: 80 to 600
from Reid Supply
Abrasive Belts sands virtually any industrial surface. . Made of Aluminium Oxide; X backing weight; Dimensions: .25 in W x 2.00 ft L. [See More]
- Type: Aluminum Oxide
- Length: 24.0
- Width: 0.25
- Grit Size: 36
from R. S. Hughes Company, Inc.
3M coated 202DZ sanding belt uses aluminum oxide as the abrasive material. 3M incorporates this aluminum oxide material into the sanding belt forming a grit of 80. This particular 3M sanding belt is 2 1/4 in wide by 157 1/2 in long. [See More]
- Type: Aluminum Oxide
- Width: 2.25
- Belt Type: Nonwoven
- Length: 157.5
from Flexovit USA, Inc.
Delivers consistent and controlled abrasion at low surface temperatures and very resistant to clogging. Offers highly efficient removal with excellent finish. Can reduce the number of operations needed to obtain the desired finish. General Purpose - Coarse. Aggressive action ideal for rugged... [See More]
- Type: Aluminum Oxide
- Width: 0.50
- Belt Type: Portable Grinder or File Belt; Nonwoven
- Length: 18.0
from Weiler Abrasives
Constructed using a resin over resin bond that provides a stronger, heat and moisture resistant bond that better utilizes the abrasive grains. Cotton cloth provides a tougher, durable backing for longer life. J-flex cloth provides a higher degree of flexibility to conform to contoured parts. For use... [See More]
- Type: Aluminum Oxide
- Length: 8.5
- Width: 8.50
- Grit Size: 120
from Uneeda Enterprizes, Inc.
641xp was designed for heavy duty operations where aggressive stock removal is required. Grain: A/O. Backing: X Weight twillcloth. Bonding: Resin over Resin. Coating: Closed. Color: Maroon. Grit Range: 24 â €"400 [See More]
- Type: Aluminum Oxide
- Backing: Cloth; X Weight twillcloth
- Grit Size: 24 to 400
from Reid Supply
Abrasive Belts sands virtually any industrial surface. . Made of Aluminium Oxide; X backing weight; Dimensions: 1.00 in W x 3.50 ft L. [See More]
- Type: Aluminum Oxide
- Length: 42.0
- Width: 1.00
- Grit Size: 50
from R. S. Hughes Company, Inc.
3M coated 202DZ sanding belt uses aluminum oxide as the abrasive material. 3M incorporates this aluminum oxide material into the sanding belt forming a grit of 80. This particular 3M sanding belt is 3 1/4 in wide by 148 in long. [See More]
- Type: Aluminum Oxide
- Width: 3.25
- Belt Type: Nonwoven
- Length: 148.0
from Weiler Abrasives
Resin over resin bonded. Provides a stronger, heat and moisture resistant bond that better utilizes the abrasive grains. The cotton cloth provides a tougher, durable backing for longer life. J-flex cloth provides a higher degree of flexibility to conform to contoured part. Cosntructed Using a Resin... [See More]
- Type: Aluminum Oxide
- Length: 8.0
- Width: 8.00
- Grit Size: 150
from Uneeda Enterprizes, Inc.
JA512 is the standard product for metal working. It is J weight polyester / cotton blend backed material. It is A/O closed coat and grits are 60 to 600. The JA512 can be used for narrow sanding belts. Grain: A/O. Backing: J Weight Poly Cotton Cloth. Bonding: Resin over Glue. Coating: Closed. Color:... [See More]
- Type: Aluminum Oxide
- Backing: Cloth; J Weight Poly Cotton Cloth
- Grit Size: 60 to 600
from Reid Supply
Abrasive Belts sands virtually any industrial surface. . Made of Aluminium Oxide; backing weight; Dimensions: .50 in W x 24 in L. [See More]
- Type: Aluminum Oxide
- Width: 0.50
- Belt Type: Bench, Pedestal or Backstand
- Length: 24.0
from R. S. Hughes Company, Inc.
3M coated 202DZ sanding belt uses aluminum oxide as the abrasive material. 3M incorporates this aluminum oxide material into the sanding belt forming a grit of 80. This particular 3M sanding belt is 4 in wide by 132 in long. [See More]
- Type: Aluminum Oxide
- Width: 4.00
- Belt Type: Nonwoven
- Length: 132.0
from Weiler Abrasives
Constructed using a resin over resin bond that provides a stronger, heat and moisture resistant bond that better utilizes the abrasive grains. Cotton cloth provides a tougher, durable backing for longer life. J-flex cloth provides a higher degree of flexibility to conform to contoured parts. For use... [See More]
- Type: Aluminum Oxide
- Length: 7.8
- Width: 7.80
- Grit Size: 180
from Uneeda Enterprizes, Inc.
JA535 is designed with increased thickness and durability. Grain: Aluminum Oxide. Backing: JX Weight Poly Cotton Cloth. Bonding: Resin over Resin. Coating: Closed. Color: Green. Grit Range: 60 â €" 600 [See More]
- Type: Aluminum Oxide
- Backing: Cloth; JX Weight Poly Cotton Cloth
- Grit Size: 60 to 600
from R. S. Hughes Company, Inc.
3M coated 202DZ sanding belt uses aluminum oxide as the abrasive material. 3M incorporates this aluminum oxide material into the sanding belt forming a grit of 80. This particular 3M sanding belt is 6 in wide by 323 in long. [See More]
- Type: Aluminum Oxide
- Width: 6.00
- Belt Type: Nonwoven
- Length: 323.0
from Weiler Abrasives
Constructed using a resin over resin bond that provides a stronger, heat and moisture resistant bond that better utilizes the abrasive grains. Cotton cloth provides a tougher, durable backing for longer life. J-flex cloth provides a higher degree of flexibility to conform to contoured parts. For use... [See More]
- Type: Aluminum Oxide
- Length: 7.3
- Width: 7.30
- Grit Size: 240
from Uneeda Enterprizes, Inc.
PG730 Long life with out decreased cutting power. Excellent choice for exotic metals. Wet Operations. Grain: CG-A/O. Backing: Y Weight Polyester Cloth. Bonding: Resin over Resin. Coating: Closed. Color: Maroon. Grit Range: 80 â €" 800. Compact grain Waterproof [See More]
- Type: Aluminum Oxide
- Backing: Cloth; Y Weight Polyester Cloth
- Grit Size: 80 to 800
from R. S. Hughes Company, Inc.
3M coated 202DZ sanding belt uses aluminum oxide as the abrasive material. 3M incorporates this aluminum oxide material into the sanding belt forming a grit of P100. This particular 3M sanding belt is 25 in wide by 146 in long. [See More]
- Type: Aluminum Oxide
- Width: 25.00
- Belt Type: Nonwoven
- Length: 146.0
from Weiler Abrasives
Constructed using a resin over resin bond that provides a stronger, heat and moisture resistant bond that better utilizes the abrasive grains. Cotton cloth provides a tougher, durable backing for longer life. J-flex cloth provides a higher degree of flexibility to conform to contoured parts. For use... [See More]
- Type: Aluminum Oxide
- Length: 7.3
- Width: 7.30
- Grit Size: 320
from Uneeda Enterprizes, Inc.
PG830 Long life with out decreased cutting power. Excellent choice for exotic metals. Dry Operations. Grain: CG-A/O. Backing: Y Weight Polyester Cloth. Bonding: Resin over Resin. Coating: Closed. Color: Maroon. Grit Range: 80 â €" 800. Compact grain [See More]
- Type: Aluminum Oxide
- Backing: Cloth; Y Weight Polyester Cloth
- Grit Size: 80 to 800
from R. S. Hughes Company, Inc.
3M coated 202DZ sanding belt uses aluminum oxide as the abrasive material. 3M incorporates this aluminum oxide material into the sanding belt forming a grit of P150. This particular 3M sanding belt is 1 1/2 in wide by 103 in long. [See More]
- Type: Aluminum Oxide
- Width: 1.50
- Belt Type: Nonwoven
- Length: 103.0
from Weiler Abrasives
Constructed using a resin over resin bond that provides a stronger, heat and moisture resistant bond that better utilizes the abrasive grains. Cotton cloth provides a tougher, durable backing for longer life. J-flex cloth provides a higher degree of flexibility to conform to contoured parts. For use... [See More]
- Type: Aluminum Oxide
- Length: 10.0
- Width: 10.00
- Grit Size: 60
from Uneeda Enterprizes, Inc.
UAOX is an X weight polyester backed cloth. This material can be used in a wet application. It is A/O open coat. Grit range is 40-180. Grain: Aluminium Oxide. Backing: X Weight Cloth. Bonding: Resin over Resin. Coating: Semi-Open. Color: Maroon. Grit Range: 24-180 [See More]
- Type: Aluminum Oxide
- Backing: Cloth; X Weight Cloth
- Grit Size: 24 to 180
from R. S. Hughes Company, Inc.
3M coated 211K sanding belt uses aluminum oxide as the abrasive material. 3M incorporates this aluminum oxide material into the sanding belt forming a grit of 320. This particular 3M sanding belt is 1 in wide by 54 in long. [See More]
- Type: Aluminum Oxide
- Width: 1.00
- Belt Type: Nonwoven
- Length: 54.0
from Weiler Abrasives
Constructed using a resin over resin bond that provides a stronger, heat and moisture resistant bond that better utilizes the abrasive grains. Cotton cloth provides a tougher, durable backing for longer life. J-flex cloth provides a higher degree of flexibility to conform to contoured parts. For use... [See More]
- Type: Aluminum Oxide
- Length: 9.6
- Width: 9.60
- Grit Size: 80
from Uneeda Enterprizes, Inc.
UMAYD is a heat treated product specially coated onto a heavy duty polyester backing. Ideal for narrow sanding belts as well as Wide Sanding Belts in both the woodworking and metal working industries. This truly unique product combines heat treated Aluminum Oxide Grain and a special resin bonding... [See More]
- Type: Aluminum Oxide
- Backing: Cloth; Polyester Cloth
- Grit Size: 40 to 180
from R. S. Hughes Company, Inc.
3M coated 241E sanding belt uses aluminum oxide as the abrasive material. 3M incorporates this aluminum oxide material into the sanding belt forming a grit of 100. This particular 3M sanding belt is 1 in wide by 30 in long. [See More]
- Type: Aluminum Oxide
- Width: 1.00
- Belt Type: Nonwoven
- Length: 30.0
from Weiler Abrasives
Constructed using a resin over resin bond that provides a stronger, heat and moisture resistant bond that better utilizes the abrasive grains. Cotton cloth provides a tougher, durable backing for longer life. J-flex cloth provides a higher degree of flexibility to conform to contoured parts. For use... [See More]
- Type: Aluminum Oxide
- Length: 9.0
- Width: 9.00
- Grit Size: 100
from Uneeda Enterprizes, Inc.
X911 was designed for wet operations. Grain: Aluminum Oxide. Backing: X Weight Polyester Cotton Cloth. Bonding: Resin over Resin. Coating: Closed. Color: Brown. Grit Range: 16 â €" 400. Waterproof [See More]
- Type: Aluminum Oxide
- Backing: Cloth; X Weight Polyester Cotton Cloth
- Grit Size: 16 to 400
from R. S. Hughes Company, Inc.
3M coated 241E sanding belt uses aluminum oxide as the abrasive material. 3M incorporates this aluminum oxide material into the sanding belt forming a grit of 100. This particular 3M sanding belt is 1/2 in wide by 12 in long. [See More]
- Type: Aluminum Oxide
- Width: 0.50
- Belt Type: Nonwoven
- Length: 12.0
from Weiler Abrasives
Constructed using a resin over resin bond that provides a stronger, heat and moisture resistant bond that better utilizes the abrasive grains. Cotton cloth provides a tougher, durable backing for longer life. J-flex cloth provides a higher degree of flexibility to conform to contoured parts. For use... [See More]
- Type: Aluminum Oxide
- Length: 8.7
- Width: 8.70
- Grit Size: 120
from Uneeda Enterprizes, Inc.
AEKM is an aluminum oxide grain with a stearate coating. The stearation reduces clogging which contributes to the surface finish. It has been specifically designed to sand UV lacquers. AEKM is best used with minimal sanding pressure and a low belt speed. Grain: Aluminum Oxide. Backing: E Weight... [See More]
- Type: Aluminum Oxide
- Backing: Paper; E Weight Paper
- Grit Size: 180 to 500
from R. S. Hughes Company, Inc.
3M coated 241E sanding belt uses aluminum oxide as the abrasive material. 3M incorporates this aluminum oxide material into the sanding belt forming a grit of 100. This particular 3M sanding belt is 1/2 in wide by 18 in long. [See More]
- Type: Aluminum Oxide
- Width: 0.50
- Belt Type: Nonwoven
- Length: 18.0
from Weiler Abrasives
Constructed using a resin over resin bond that provides a stronger, heat and moisture resistant bond that better utilizes the abrasive grains. Cotton cloth provides a tougher, durable backing for longer life. J-flex cloth provides a higher degree of flexibility to conform to contoured parts. For use... [See More]
- Type: Aluminum Oxide
- Length: 8.2
- Width: 8.25
- Grit Size: 150
from Uneeda Enterprizes, Inc.
ARKFEO material was created with soft or resinous woods in mind. Soft woods have a high resin content, which leads to build up on the abrasive material. For these woods, ARKFEO has been developed with an extra open coat. To get the best results from ARKFEO a low sanding pressure should be applied. [See More]
- Type: Aluminum Oxide
- Backing: Paper; F Weight Paper
- Grit Size: 40 to 100
from R. S. Hughes Company, Inc.
3M coated 241E sanding belt uses aluminum oxide as the abrasive material. 3M incorporates this aluminum oxide material into the sanding belt forming a grit of 100. This particular 3M sanding belt is 1/2 in wide by 24 in long. [See More]
- Type: Aluminum Oxide
- Width: 0.50
- Belt Type: Nonwoven
- Length: 24.0
from Weiler Abrasives
Constructed using a resin over resin bond that provides a stronger, heat and moisture resistant bond that better utilizes the abrasive grains. Cotton cloth provides a tougher, durable backing for longer life. J-flex cloth provides a higher degree of flexibility to conform to contoured parts. For use... [See More]
- Type: Aluminum Oxide
- Length: 7.5
- Width: 7.50
- Grit Size: 180
from Uneeda Enterprizes, Inc.
ARKFO is a versatile material for most types of wood. This material combines the ability for significant stock removal as well as producing excellent surface finishes. To get the most out of ARKFO minimal sanding pressure should be used. This will give less raised fibers and an even finish. Grain:... [See More]
- Type: Aluminum Oxide
- Backing: Paper; F Weight Paper
- Grit Size: 120 to 220
from R. S. Hughes Company, Inc.
3M coated 241E sanding belt uses aluminum oxide as the abrasive material. 3M incorporates this aluminum oxide material into the sanding belt forming a grit of 100. This particular 3M sanding belt is 1/4 in wide by 24 in long. [See More]
- Type: Aluminum Oxide
- Width: 0.25
- Belt Type: Nonwoven
- Length: 24.0
from Weiler Abrasives
Constructed using a resin over resin bond that provides a stronger, heat and moisture resistant bond that better utilizes the abrasive grains. Cotton cloth provides a tougher, durable backing for longer life. J-flex cloth provides a higher degree of flexibility to conform to contoured parts. For use... [See More]
- Type: Aluminum Oxide
- Length: 7.3
- Width: 7.30
- Grit Size: 240
from Uneeda Enterprizes, Inc.
Products > Narrow Sanding Belts > Narrow Sanding Belts for Woodworking > EKA1000 [See More]
- Type: Aluminum Oxide
- Backing: Paper; Grit #50 - #220 F-Weight PaperGrit #240 - #320, #400 E-Weight Paper
- Grit Size: 40 to 1000
from R. S. Hughes Company, Inc.
3M coated 241E sanding belt uses aluminum oxide as the abrasive material. 3M incorporates this aluminum oxide material into the sanding belt forming a grit of 100. This particular 3M sanding belt is 7 7/8 in wide by 137 in long. [See More]
- Type: Aluminum Oxide
- Width: 7.88
- Belt Type: Nonwoven
- Length: 137.0
from Weiler Abrasives
Constructed using a resin over resin bond that provides a stronger, heat and moisture resistant bond that better utilizes the abrasive grains. Cotton cloth provides a tougher, durable backing for longer life. J-flex cloth provides a higher degree of flexibility to conform to contoured parts. For use... [See More]
- Type: Aluminum Oxide
- Length: 6.9
- Width: 6.90
- Grit Size: 320
from Uneeda Enterprizes, Inc.
Products > Narrow Sanding Belts > Narrow Sanding Belts for Woodworking > EKA400J [See More]
- Type: Aluminum Oxide
- Backing: Cloth; J- Weight Cloth
- Grit Size: 60 to 320
from R. S. Hughes Company, Inc.
3M coated 241E sanding belt uses aluminum oxide as the abrasive material. 3M incorporates this aluminum oxide material into the sanding belt forming a grit of 120. This particular 3M sanding belt is 1 in wide by 18 27/32 in long. [See More]
- Type: Aluminum Oxide
- Width: 1.00
- Belt Type: Nonwoven
- Length: 18.8
from Weiler Abrasives
Constructed using a resin over resin bond that provides a stronger, heat and moisture resistant bond that better utilizes the abrasive grains. Cotton cloth provides a tougher, durable backing for longer life. J-flex cloth provides a higher degree of flexibility to conform to contoured parts. For use... [See More]
- Type: Aluminum Oxide
- Length: 10.0
- Width: 10.00
- Grit Size: 60
from Uneeda Enterprizes, Inc.
Products > Narrow Sanding Belts > Narrow Sanding Belts for Woodworking > EKA500JF [See More]
- Type: Aluminum Oxide
- Backing: Cloth; J-Flex Cloth
- Grit Size: 60 to 320
from R. S. Hughes Company, Inc.
3M coated 241E sanding belt uses aluminum oxide as the abrasive material. 3M incorporates this aluminum oxide material into the sanding belt forming a grit of 120. This particular 3M sanding belt is 3 in wide by 44 13/16 in long. [See More]
- Type: Aluminum Oxide
- Width: 3.00
- Belt Type: Nonwoven
- Length: 44.8
from Weiler Abrasives
Resin over resin bonded. Provides a stronger, heat and moisture resistant bond that better utilizes the abrasive grains. The cotton cloth provides a tougher, durable backing for longer life. J-flex cloth provides a higher degree of flexibility to conform to contoured part. Cosntructed Using a Resin... [See More]
- Type: Aluminum Oxide
- Length: 10.0
- Width: 10.00
- Grit Size: 80
from Uneeda Enterprizes, Inc.
RKEO is a heavy duty paper product primarily used in the flooring industry as well as Automotive/ Marine. Because of the durability of this product, it can level uneven floor surfaces without tearing easily. Grain: Aluminum Oxide. Backing: E Weight Paper. Bonding: Resin over Resin. Coating:... [See More]
- Type: Aluminum Oxide
- Backing: Paper; E Weight Paper
- Grit Size: 40 to 240
from R. S. Hughes Company, Inc.
3M coated 241E sanding belt uses aluminum oxide as the abrasive material. 3M incorporates this aluminum oxide material into the sanding belt forming a grit of 320. This particular 3M sanding belt is 1 in wide by 30 in long. [See More]
- Type: Aluminum Oxide
- Width: 1.00
- Belt Type: Nonwoven
- Length: 30.0
from Weiler Abrasives
Resin over resin bonded. Provides a stronger, heat and moisture resistant bond that better utilizes the abrasive grains. The cotton cloth provides a tougher, durable backing for longer life. J-flex cloth provides a higher degree of flexibility to conform to contoured part. Cosntructed Using a Resin... [See More]
- Type: Aluminum Oxide
- Length: 9.2
- Width: 9.20
- Grit Size: 100
from Uneeda Enterprizes, Inc.
RKJFO is an extra flexible abrasive product for profile and hand sanding. It is used for shaping and dimensioning before finishing. Grain: Aluminum Oxide. Backing: JF Weight Cloth. Bonding: Resin over Resin. Coating: Semi-Open. Color: Maroon. Grit Range: P60- P320, P400 [See More]
- Type: Aluminum Oxide
- Backing: Cloth; JF Weight Cloth
- Grit Size: 60 to 400
from R. S. Hughes Company, Inc.
3M coated 241E sanding belt uses aluminum oxide as the abrasive material. 3M incorporates this aluminum oxide material into the sanding belt forming a grit of 320. This particular 3M sanding belt is 1/2 in wide by 24 in long. [See More]
- Type: Aluminum Oxide
- Width: 0.50
- Belt Type: Nonwoven
- Length: 24.0
from Weiler Abrasives
Constructed using a resin over resin bond that provides a stronger, heat and moisture resistant bond that better utilizes the abrasive grains. Cotton cloth provides a tougher, durable backing for longer life. J-flex cloth provides a higher degree of flexibility to conform to contoured parts. For use... [See More]
- Type: Aluminum Oxide
- Length: 8.6
- Width: 8.60
- Grit Size: 120
from Uneeda Enterprizes, Inc.
RKJFON is used for profile and hand sanding where a very flexible product is needed. It â € ™s open coat and stearate layer reduces build up and improves finish. Grain: Aluminum Oxide. Backing: JF Weight Cloth. Bonding: Resin over Resin. Top Coating: Stearated. Coating: Semi-Open. [See More]
- Type: Aluminum Oxide
- Backing: Cloth; JF Weight Cloth
- Grit Size: 180 to 600
from R. S. Hughes Company, Inc.
3M coated 241E sanding belt uses aluminum oxide as the abrasive material. 3M incorporates this aluminum oxide material into the sanding belt forming a grit of 50. This particular 3M sanding belt is 1 1/8 in wide by 21 in long. [See More]
- Type: Aluminum Oxide
- Width: 1.12
- Belt Type: Nonwoven
- Length: 21.0
from Weiler Abrasives
Constructed using a resin over resin bond that provides a stronger, heat and moisture resistant bond that better utilizes the abrasive grains. Cotton cloth provides a tougher, durable backing for longer life. J-flex cloth provides a higher degree of flexibility to conform to contoured parts. For use... [See More]
- Type: Aluminum Oxide
- Length: 8.1
- Width: 8.10
- Grit Size: 150
from Uneeda Enterprizes, Inc.
RKX is primarily used for machine sanding. It has a heavy cloth back and a resin over resin binder which allows for excellent adhesion of the sanding grains to the backing, thus resulting in a stable product for demanding edge and wide belt sanding. When using abrasives with a cloth backing, using... [See More]
- Type: Aluminum Oxide
- Backing: Cloth; X Weight Cloth
- Grit Size: 24 to 180
from R. S. Hughes Company, Inc.
3M coated 241E sanding belt uses aluminum oxide as the abrasive material. 3M incorporates this aluminum oxide material into the sanding belt forming a grit of 60. This particular 3M sanding belt is 1/8 in wide by 24 in long. [See More]
- Type: Aluminum Oxide
- Width: 0.12
- Belt Type: Nonwoven
- Length: 24.0
from Weiler Abrasives
Resin over resin bonded. Provides a stronger, heat and moisture resistant bond that better utilizes the abrasive grains. The cotton cloth provides a tougher, durable backing for longer life. J-flex cloth provides a higher degree of flexibility to conform to contoured part. Cosntructed Using a Resin... [See More]
- Type: Aluminum Oxide
- Length: 7.9
- Width: 7.90
- Grit Size: 180
from Uneeda Enterprizes, Inc.
RKXO is a poly-cotton blend used for heavy duty sanding. While coarser grits are best suited for stock removal, the finer grits are ideal for finishing of raw wood. This product provides an excellent finish. Grain: Aluminum Oxide. Backing: X Weight Cloth, Poly-cotton blend. Bonding: Resin over... [See More]
- Type: Aluminum Oxide
- Backing: Cloth; X Weight Cloth, Poly-cotton blend
- Grit Size: 60 to 240
from R. S. Hughes Company, Inc.
3M coated 241E sanding belt uses aluminum oxide as the abrasive material. 3M incorporates this aluminum oxide material into the sanding belt forming a grit of 60. This particular 3M sanding belt is 3/4 in wide by 18 in long. [See More]
- Type: Aluminum Oxide
- Width: 0.75
- Belt Type: Nonwoven
- Length: 18.0
from Weiler Abrasives
Constructed using a resin over resin bond that provides a stronger, heat and moisture resistant bond that better utilizes the abrasive grains. Cotton cloth provides a tougher, durable backing for longer life. J-flex cloth provides a higher degree of flexibility to conform to contoured parts. For use... [See More]
- Type: Aluminum Oxide
- Length: 7.3
- Width: 7.35
- Grit Size: 240
from Uneeda Enterprizes, Inc.
RKXYEO is primarily designed for pine, which is a resinous wood. The open coating prevents the product from loading up, thus giving a greater life. Grain: Aluminum Oxide. Backing: X Weight Cloth, Polyester. Bonding: Resin over Resin. Coating: Open. Color: Maroon. Grit Range: P24 â €"... [See More]
- Type: Aluminum Oxide
- Backing: Cloth; X Weight Cloth, Polyester
- Grit Size: 24 to 150
from R. S. Hughes Company, Inc.
3M coated 241E sanding belt uses aluminum oxide as the abrasive material. 3M incorporates this aluminum oxide material into the sanding belt forming a grit of 60. This particular 3M sanding belt is 3/4 in wide by 20 1/2 in long. [See More]
- Type: Aluminum Oxide
- Width: 0.75
- Belt Type: Nonwoven
- Length: 20.5
from Weiler Abrasives
Resin over resin bonded. Provides a stronger, heat and moisture resistant bond that better utilizes the abrasive grains. The cotton cloth provides a tougher, durable backing for longer life. J-flex cloth provides a higher degree of flexibility to conform to contoured part. Cosntructed Using a Resin... [See More]
- Type: Aluminum Oxide
- Length: 7.1
- Width: 7.10
- Grit Size: 320
from Uneeda Enterprizes, Inc.
URAJD is an aggressive product as well as flexible which is best suited for profile sanding. Grain: Aluminum Oxide. Backing: J Weight Cloth. Bonding: Resin over Resin. Coating: Semi-Open. Color: Maroon. Grit Range: 80 â €"220 [See More]
- Type: Aluminum Oxide
- Backing: Cloth; J Weight Cloth
from R. S. Hughes Company, Inc.
3M coated 241E sanding belt uses aluminum oxide as the abrasive material. 3M incorporates this aluminum oxide material into the sanding belt forming a grit of 60. This particular 3M sanding belt is 3/8 in wide by 13 in long. [See More]
- Type: Aluminum Oxide
- Width: 0.38
- Belt Type: Nonwoven
- Length: 13.0
from Weiler Abrasives
Constructed using a resin over resin bond that provides a stronger, heat and moisture resistant bond that better utilizes the abrasive grains. Cotton cloth provides a tougher, durable backing for longer life. J-flex cloth provides a higher degree of flexibility to conform to contoured parts. For use... [See More]
- Type: Aluminum Oxide
- Length: 10.3
- Width: 10.30
- Grit Size: 60
from R. S. Hughes Company, Inc.
3M coated 241E sanding belt uses aluminum oxide as the abrasive material. 3M incorporates this aluminum oxide material into the sanding belt forming a grit of 60. This particular 3M sanding belt is 4 in wide by 90 in long. [See More]
- Type: Aluminum Oxide
- Width: 4.00
- Belt Type: Nonwoven
- Length: 90.0
from Weiler Abrasives
Resin over resin bonded. Provides a stronger, heat and moisture resistant bond that better utilizes the abrasive grains. The cotton cloth provides a tougher, durable backing for longer life. J-flex cloth provides a higher degree of flexibility to conform to contoured part. Cosntructed Using a Resin... [See More]
- Type: Aluminum Oxide
- Length: 9.8
- Width: 9.80
- Grit Size: 80
from R. S. Hughes Company, Inc.
3M coated 241E sanding belt uses aluminum oxide as the abrasive material. 3M incorporates this aluminum oxide material into the sanding belt forming a grit of 80. This particular 3M sanding belt is 1 in wide by 18 in long. [See More]
- Type: Aluminum Oxide
- Width: 1.00
- Belt Type: Nonwoven
- Length: 18.0