1 Gate Drivers
from Allegro MicroSystems Inc.
ISOLATED GATE DRIVERS [See More]
- Number of Outputs: 1
- Package Type: NH
- Output Voltage: 1000
from Win Source Electronics
Manufacturer: Infineon Technologies. Storage Condition: Dry storage cabinet & Humidity protection package. Win Source Part Number: 1047091-AUIRS20161STR. Packaging: Tape & Reel (TR). Mounting: SMD (SMT). Number of Pins: 8. Number of Outputs: 1. Output Current: 250 mA. Categories: PMIC - Gate... [See More]
- Number of Outputs: 1
- Packing Method: Tape Reel; Tape & Reel (TR); Other
- Package Type: SOIC; SOIC
from Texas Instruments
2.5 A Isolated IGBT/MOSFET Gate Driver 16-SOIC -40 to 125 [See More]
- Number of Outputs: 1
- Output Current: 2.5
- Output Voltage: 30
- Supply Voltage: 3 to 5.5
from Skyworks Solutions, Inc.
2.5 kV opto input isolated gate driver [See More]
- Number of Outputs: 1
- Output Current: 2.5
- Output Configuration: Single
- Propagation Delay: 80
from Allegro MicroSystems Inc.
ISOLATED GATE DRIVERS [See More]
- Number of Outputs: 1
- Package Type: NH
- Output Voltage: 1000
from Skyworks Solutions, Inc.
Automotive 3.75 kV Single Driver [See More]
- Number of Outputs: 1
- Output Current: 4
- Output Configuration: Single Driver
- Propagation Delay: 30
from Skyworks Solutions, Inc.
3.75 kV Opto-Driver Replacement [See More]
- Number of Outputs: 1
- Output Current: 0.6000
- Output Configuration: Single Driver
- Propagation Delay: 60
from Skyworks Solutions, Inc.
Hi CMTI Single Isolated Driver [See More]
- Number of Outputs: 1
- Output Current: 4
- Output Configuration: Single Driver, Separate Pull Up/Down
- Propagation Delay: 60
from Skyworks Solutions, Inc.
Isolated SiC and IGBT Driver w dc-dc [See More]
- Number of Outputs: 1
- Output Current: 4
- Output Configuration: Single Driver with FET Protection
- Propagation Delay: 50
from MORNSUN Guangzhou Science & Technology Co., Ltd.
MORNSUN hybrid integrated IGBT drivers are designed with a built-in isolation DC/DC converter. They can realize the safety electrical isolation between the power semiconductor and the control circuit with the high-speed optical coupling. The series features switching frequency up to 40k Hz, timing... [See More]
- Number of Outputs: 1
- Supply Voltage: 15
- Output Voltage: 15
- Switching Frequency: 40
from ROHM Semiconductor USA, LLC
Single lens reflex (SLR) cameras use relatively large actuators compared to compact digital cameras. ROHM's lens drivers for SLRs integrate high voltage resistance and large current output in a compact surface mount package, making them ideal for compact SLR cameras of all types. [See More]
- Number of Outputs: 1
- Operating Temperature: -30 to 85
- Driver Type: 1 to 2ch Lens Drivers for Single-lens Reflex Cameras
- Package Type: VQFN028V5050
from Quarktwin Technology Ltd.
LED Driver IC 1 Output Linear Dimming 150mA 8-SOIC-EP [See More]
- Number of Outputs: 1; 1
- Output Current: 0.1500
- Output Configuration: Inverting
- Operating Temperature: -40 to 85
from Utmel Electronic Limited
Gate Drivers 2MHz Smart Power Stage (SPS) [See More]
- Number of Outputs: 1; 1
- Supply Voltage: 4.5 to 5.5
- Output Current: 55
- Rise Time: 4
from ROHM Semiconductor GmbH
Single lens reflex (SLR) cameras use relatively large actuators compared to compact digital cameras. ROHM's lens drivers for SLRs integrate high voltage resistance and large current output in a compact surface mount package, making them ideal for compact SLR cameras of all types. [See More]
- Number of Outputs: 1
- Operating Temperature: -30 to 85
- Driver Type: 1 to 2ch Lens Drivers for Single-lens Reflex Cameras
- Package Type: VQFN028V5050
from Semikron, Inc.
SEMIKRON IGBT driver family. SEMIKRON offers two driver families – the SKHI and the SKYPER drivers. SKYPER 12 press-fit, SKYPER 32, SKYPER 42 LJ and SKYPER 52 cover with 1W to 10W output power per channel the whole power range between 30kW and 2MW inverters. The high integration of SEMIKRON... [See More]
- Number of Outputs: 1; 2; 4; 3, 6, 7
- Output Current: 30
from MORNSUN Guangzhou Science & Technology Co., Ltd.
MORNSUN hybrid integrated IGBT drivers are designed with a built-in isolation DC/DC converter. They can realize the safety electrical isolation between the power semiconductor and the control circuit with the high-speed optical coupling. The series features switching frequency up to 40k Hz, timing... [See More]
- Number of Outputs: 1
- Supply Voltage: 15
- Output Voltage: 18
- Switching Frequency: 20
from ROHM Semiconductor USA, LLC
Single lens reflex (SLR) cameras use relatively large actuators compared to compact digital cameras. ROHM's lens drivers for SLRs integrate high voltage resistance and large current output in a compact surface mount package, making them ideal for compact SLR cameras of all types. [See More]
- Number of Outputs: 1
- Output Current: 1
- Driver Type: 1 to 2ch Lens Drivers for Single-lens Reflex Cameras
- Supply Voltage: 10
from Quarktwin Technology Ltd.
LED Driver IC 1 Output DC DC Regulator Step-Down (Buck) PWM Dimming 3A 16-QFN (4x4) [See More]
- Number of Outputs: 1; 1
- Output Current: 3
- Output Configuration: Inverting; Step-Down (Buck)
- Switching Frequency: 2000
from Utmel Electronic Limited
Gate Drivers DrMOS 55A 5V [See More]
- Number of Outputs: 1; 1
- Supply Voltage: 4.5 to 5.5
- Output Current: 55
- Rise Time: 10
from ROHM Semiconductor GmbH
Single lens reflex (SLR) cameras use relatively large actuators compared to compact digital cameras. ROHM's lens drivers for SLRs integrate high voltage resistance and large current output in a compact surface mount package, making them ideal for compact SLR cameras of all types. [See More]
- Number of Outputs: 1
- Output Current: 1
- Driver Type: 1 to 2ch Lens Drivers for Single-lens Reflex Cameras
- Supply Voltage: 10
from MORNSUN Guangzhou Science & Technology Co., Ltd.
MORNSUN hybrid integrated IGBT drivers are designed with a built-in isolation DC/DC converter. They can realize the safety electrical isolation between the power semiconductor and the control circuit with the high-speed optical coupling. The series features switching frequency up to 40k Hz, timing... [See More]
- Number of Outputs: 1
- Supply Voltage: 15
- Output Voltage: 15
- Switching Frequency: 20
from ROHM Semiconductor USA, LLC
The BD65491FV motor driver provides 1 Full-ON Drive H-bridge channel, while BD65492MUV provides 2 Full-ON Drive H-bridge channels. These ICs feature wide range operating from 1.8V and low power consumption by high switching speed in a compact surface mount package. [See More]
- Number of Outputs: 1
- Output Current: 1.2
- Driver Type: 1-Channel Lens Driver for Single-lens Reflex Cameras
- Supply Voltage: 20
from Quarktwin Technology Ltd.
LED Driver IC 1 Output DC DC Regulator Step-Down (Buck) Analog, PWM Dimming 2A 10-SOIC [See More]
- Number of Outputs: 1; 1
- Output Current: 2
- Output Configuration: Inverting; Step-Down (Buck)
- Operating Temperature: -40 to 125
from Utmel Electronic Limited
H-Bridge Driver 12V 24-Pin SOIC W T/R [See More]
- Number of Outputs: 1; 1
- Supply Voltage: 12
- Driver Type: Dual Gate Driver
- Operating Temperature: 0 to 70
from ROHM Semiconductor GmbH
Single lens reflex (SLR) cameras use relatively large actuators compared to compact digital cameras. ROHM's lens drivers for SLRs integrate high voltage resistance and large current output in a compact surface mount package, making them ideal for compact SLR cameras of all types. [See More]
- Number of Outputs: 1
- Output Current: 1
- Driver Type: 1-Channel Lens Driver for Single-lens Reflex Cameras
- Supply Voltage: 10
from ROHM Semiconductor USA, LLC
The BD65494MUV motor driver provides 1 Full-On Driver H-Bridge channel. This driver features wide range operating from 2.0V and low power consumption by fast switching speed in a compact surface mount package. [See More]
- Number of Outputs: 1
- Output Current: 1
- Driver Type: 1-Channel Lens Driver for Single-lens Reflex Cameras
- Supply Voltage: 10
from Quarktwin Technology Ltd.
LED Driver IC 1 Output DC DC Regulator Step-Down (Buck) Analog, PWM Dimming 2A 16-eTSSOP-EP [See More]
- Number of Outputs: 1; 1
- Output Current: 2
- Output Configuration: Inverting; Step-Down (Buck)
- Operating Temperature: -40 to 125
from Utmel Electronic Limited
IC BRIDGE DRIVER PAR 20PLCC [See More]
- Number of Outputs: 1; 1
- Output Voltage: 46
- Driver Type: Dual Gate Driver
- Output Current: 1
from ROHM Semiconductor GmbH
Single lens reflex (SLR) cameras use relatively large actuators compared to compact digital cameras. ROHM's lens drivers for SLRs integrate high voltage resistance and large current output in a compact surface mount package, making them ideal for compact SLR cameras of all types. [See More]
- Number of Outputs: 1
- Output Current: 1.2
- Driver Type: 1-Channel Lens Driver for Single-lens Reflex Cameras
- Supply Voltage: 20
from ROHM Semiconductor USA, LLC
1ch system motor driver of the ROHM is a driver of one channel developed to correspond to the drive channel to which an individual design is requested by the disk drive composition of CD / DVD. The best motor driver can be selected according to DSP, the loading motor, and the actuator for CD / DVD... [See More]
- Number of Outputs: 1
- Operating Temperature: -35 to 85
- Driver Type: 1ch System Motor Driver ICs
- Package Type: SOP; SOP8
from Quarktwin Technology Ltd.
LED Driver IC 1 Output DC DC Regulator Step-Down (Buck) PWM Dimming 1.5A 10-DFN (3x3) [See More]
- Number of Outputs: 1; 1
- Output Current: 1.5
- Output Configuration: Inverting; Step-Down (Buck)
- Operating Temperature: 150
from Utmel Electronic Limited
IC BRIDGE DRIVER PAR 8MSOP [See More]
- Number of Outputs: 1; 1
- Supply Voltage: 3 to 10
- Driver Type: Dual Gate Driver
- Operating Temperature: -35
from ROHM Semiconductor GmbH
The BD65494MUV motor driver provides 1 Full-On Driver H-Bridge channel. This driver features wide range operating from 2.0V and low power consumption by fast switching speed in a compact surface mount package. [See More]
- Number of Outputs: 1
- Output Current: 1
- Driver Type: 1-Channel Lens Driver for Single-lens Reflex Cameras
- Supply Voltage: 10
from ROHM Semiconductor USA, LLC
The BH6578FVM and BD7931F are reversible motor drivers with a wide output dynamic range, with power MOS used for theoutput transistor. The motor drivers can set the output mode to four modes of normal rotation, reverse rotation, stop (idling),and braking in accordance with input logic (2 inputs). [See More]
- Number of Outputs: 1
- Package Type: MSOP8
- Driver Type: 1ch System Motor Driver ICs
- Screening Level: Commercial
from Quarktwin Technology Ltd.
LED Driver IC 1 Output DC DC Regulator Step-Down (Buck) PWM Dimming 3A 10-DFN (3x3) [See More]
- Number of Outputs: 1; 1
- Output Current: 3
- Output Configuration: Inverting; Step-Down (Buck)
- Operating Temperature: 150
from Utmel Electronic Limited
IC BRIDGE DRIVER PAR SIP9 [See More]
- Number of Outputs: 1; 1
- Output Current: 0.2000
- Driver Type: Dual Gate Driver
- Supply Voltage: 9
from ROHM Semiconductor GmbH
BD2310G is 1ch Low-side Gate Driver, which can drive external Nch-FET and IGBT at high speed. BD2310G can supply output current 4A at small package SSOP5. This driver has the VREF pin for external input logic supply voltage and this range is 2.0V to 5.5V. As a protection function, the driver... [See More]
- Number of Outputs: 1
- Operating Temperature: -40 to 125
- Supply Voltage: 4.5 to 18
- Package Type: SSOP5
from ROHM Semiconductor USA, LLC
The BD65496MUV motor driver provides 1 Full-On Driver H-Bridge channel. This driver features wide range operating from 1.8V and low power consumption by fast switching speed in a compact surface mount package. [See More]
- Number of Outputs: 1
- Output Current: 1
- Driver Type: Dual Gate Driver
- Supply Voltage: 10
from Quarktwin Technology Ltd.
LED Driver IC 1 Output DC DC Controller Constant Current PWM Dimming 32-QFN (5x5) [See More]
- Number of Outputs: 1; 1
- Output Voltage: 70
- Output Configuration: Inverting; Constant Current
- Switching Frequency: 700
from Utmel Electronic Limited
IC DRIVER HI SIDE RECHARGE 8-SOI [See More]
- Number of Outputs: 1; 1
- Output Voltage: 170
- Driver Type: High-side
- Output Current: 1.5
from ROHM Semiconductor GmbH
The BD65496MUV motor driver provides 1 Full-On Driver H-Bridge channel. This driver features wide range operating from 1.8V and low power consumption by fast switching speed in a compact surface mount package. [See More]
- Number of Outputs: 1
- Output Current: 1.2
- Driver Type: Dual Gate Driver
- Supply Voltage: 20
from ROHM Semiconductor USA, LLC
This motor driver IC adopts PrestoMOS ™ as the output transistor, and put in a small full molding package with the high voltage gate driver chip. The protection circuits for overcurrent, overheating, under voltage lock out and the high voltage bootstrap diode with current regulation are... [See More]
- Number of Outputs: 1
- Output Current: 1.5
- Driver Type: 3-Phase Brushless Fan Motor Driver
- Supply Voltage: 600
from Quarktwin Technology Ltd.
LED Driver IC 1 Output DC DC Regulator Step-Up (Boost) PWM Dimming 20mA 5-MLPD (3x3) [See More]
- Number of Outputs: 1; 1
- Output Voltage: 36
- Output Configuration: Inverting; Step-Up (Boost)
- Output Current: 0.0200
from Utmel Electronic Limited
IC DRIVER HI-SIDE HI VOLT 8-SOIC [See More]
- Number of Outputs: 1; 1
- Output Current: 0.2000
- Driver Type: High-side
- Supply Voltage: 5
from ROHM Semiconductor GmbH
BM64300MUV is the pre-driver IC of sine wave drive for three-phase brushless motor driver that supports 48 V power supply controlling the motor driver constructed in external FETs. It detects a rotor position by 3 Hall sensors. In addition, silent and low vibration operations are implemented by... [See More]
- Number of Outputs: 1
- Supply Voltage: 100
- Driver Type: Three-phase
- Operating Temperature: -40 to 105
from ROHM Semiconductor USA, LLC
This motor driver IC adopts PrestoMOS ™ as the output transistor, and put in a small full molding package with the 120 ° square wave commutation controller chip and the high voltage gate driver chip. The protection circuits for overcurrent, overheating, under voltage lock out and the high... [See More]
- Number of Outputs: 1
- Output Current: 1.5
- Driver Type: 3-Phase Brushless Fan Motor Driver
- Supply Voltage: 600
from Quarktwin Technology Ltd.
LED Driver IC 1 Output DC DC Regulator Step-Up (Boost) PWM Dimming 20mA 6-MLP/DFN (2x3) [See More]
- Number of Outputs: 1; 1
- Output Voltage: 32
- Output Configuration: Inverting; Step-Up (Boost)
- Output Current: 0.0200
from Utmel Electronic Limited
IC GATE DRVR HALF-BRIDGE 44PLCC [See More]
- Number of Outputs: 1; 1
- Output Voltage: 620
- Driver Type: Dual Gate Driver
- Output Current: 0.5000
from ROHM Semiconductor GmbH
This 3-phase Brushless Fan motor driver IC adopts MOSFET as the output transistor, and put in a small full molding package with the high voltage gate driver chip. The protection circuits for overcurrent, overheating, under voltage lock out and the high voltage bootstrap diode with current regulation... [See More]
- Number of Outputs: 1
- Output Current: 2
- Driver Type: 3-Phase Brushless Fan Motor Driver
- Supply Voltage: 250
from ROHM Semiconductor USA, LLC
BD62110AEFJ is a built-in 1 channel H-bridge motor driver for DC brush motors. This driver can facilitate low power consumption by direct PWM. There are built in protection circuits in this IC. Each protection circuit operation contributes to set high reliability. [See More]
- Number of Outputs: 1
- Output Current: 1
- Driver Type: 36V 1ch DC Brush Motor Drivers
- Supply Voltage: 36
from Quarktwin Technology Ltd.
LED Driver IC 1 Output DC DC Regulator Step-Up (Boost) Dimming 1.5A (Switch) 10-TDFN (3x3) [See More]
- Number of Outputs: 1; 1
- Output Voltage: 23
- Output Configuration: Inverting; Step-Up (Boost)
- Output Current: 1.5
from Utmel Electronic Limited
IC GATE DRVR LOW-SIDE 8SOIC [See More]
- Number of Outputs: 1; 1
- Output Current: 14
- Driver Type: Low-side
- Supply Voltage: 35
from ROHM Semiconductor GmbH
This 3-phase Brushless Fan motor driver IC adopts PrestoMOS ™ as the output transistor, and put in a small full molding package with the 180 ° sinusoidal commutation controller chip and the high voltage gate driver chip. The protection circuits for overcurrent, overheating, under voltage... [See More]
- Number of Outputs: 1
- Output Current: 1.5
- Driver Type: 3-Phase Brushless Fan Motor Driver
- Supply Voltage: 600
from ROHM Semiconductor USA, LLC
BD63725BEFV is a bipolar low-consumption driver that driven by PWM current. Rated power supply voltage of the device is 36V, and rated output current is 2.5 A. CLK-IN driving mode is adopted for input interface, and excitation mode is corresponding to FULL STEP mode, HALF STEP mode (2 types) and... [See More]
- Number of Outputs: 1
- Output Current: 2.5
- Driver Type: 36V High-performance, High-reliability Withstand Voltage Stepping Motor Driver
- Supply Voltage: 36
from Quarktwin Technology Ltd.
LED Driver IC 1 Output DC DC Regulator SEPIC, Step-Up (Boost) PWM Dimming 150mA 10-MSOP-EP [See More]
- Number of Outputs: 1; 1
- Output Current: 0.1500
- Output Configuration: Inverting; SEPIC, Step-Up (Boost)
- Switching Frequency: 2000
from Utmel Electronic Limited
IC GATE DRVR LOW-SIDE 8SOIC [See More]
- Number of Outputs: 1; 1
- Output Current: 1
- Driver Type: Low-side
- Supply Voltage: 16
from ROHM Semiconductor GmbH
The BD69060GFT is a 5V single-phase full-wave Fan Motor Driver with the built-in hall element. It is part of the DC brushless Fan Motor Driver series. The BD69060GFT has a compact package. It has the silent drive by soft switching and the low battery consumption via its standby function. The... [See More]
- Number of Outputs: 1
- Output Current: 1
- Driver Type: 5V Single-phase Full-wave Fan Motor Driver
- Supply Voltage: 7
from ROHM Semiconductor USA, LLC
BD63610AEFV is a bipolar low-consumption driver that driven by PWM current. Rated power supply voltage of the device is 36V, and rated output current is 0.8A. CLK-IN driving mode is adopted for input interface, and excitation mode is corresponding to FULL STEP mode, HALF STEP mode. In addition, the... [See More]
- Number of Outputs: 1
- Output Current: 0.8000
- Driver Type: 36V Stepping Motor Driver
- Supply Voltage: 36
from Quarktwin Technology Ltd.
LED Driver IC 1 Output AC DC Offline Switcher Flyback Dimming 8-DFN (2x2) [See More]
- Number of Outputs: 1; 1
- Operating Temperature: -40 to 85
- Output Configuration: Inverting; Flyback
- Package Type: 8-UFDFN Exposed Pad
from Utmel Electronic Limited
IC INVERTING FET DRVR SOT-23-5 [See More]
- Number of Outputs: 1; 1
- Output Current: 2
- Output Configuration: Inverting
- Supply Voltage: 10
from ROHM Semiconductor GmbH
The BU69090NUX is a 5V single-phase full-wave FAN motor driver with built in HALL element. It is part of the DC brushless FAN motor driver series. BU69090NUX is built in a compact package and provides Auto Gain Control (AGC) function, silent drive by soft switching, and low battery consumption via... [See More]
- Number of Outputs: 1
- Output Current: 0.8000
- Driver Type: 5V Single-phase Full-wave Fan Motor Driver
- Supply Voltage: 7
from ROHM Semiconductor USA, LLC
BD63620AEFV is a bipolar low-consumption driver that driven by PWM current. Rated power supply voltage of the device is 36V, and rated output current is 2.0A. CLK-IN driving mode is adopted for input interface, and excitation mode is corresponding to FULL STEP mode, HALF STEP mode (2 types) and... [See More]
- Number of Outputs: 1
- Output Current: 2
- Driver Type: 36V Stepping Motor Driver
- Supply Voltage: 36
from Quarktwin Technology Ltd.
LED Driver IC 1 Output DC DC Controller Step-Up (Boost) Dimming 24-TQFN (3x4) [See More]
- Number of Outputs: 1; 1
- Output Voltage: 100
- Output Configuration: Inverting; Step-Up (Boost)
- Switching Frequency: 400
from Utmel Electronic Limited
IC PIN DRIVER 40MHZ 3ST 8-SOIC [See More]
- Number of Outputs: 1; 1
- Operating Temperature: -40 to 85
- Supply Voltage: 15
- Package Type: SOIC; SOIC
from ROHM Semiconductor GmbH
The BU64295GWZ is designed to drive Bi-directional voice coil motors. Additionally the driver is able to source the output current without the need for a direction control signal. The driver includes ISRC (intelligent slew rate control) to reduce mechanical ringing to optimize the camera ’s... [See More]
- Number of Outputs: 1
- Output Current: 0.2000
- Driver Type: Bi-directional VCM driver for Auto focus
- Supply Voltage: 5.5
from ROHM Semiconductor USA, LLC
The BS2101F is a monolithic high and low side gate drive IC, which can drive high speed power MOSFET and IGBT driver with bootstrap operation. The floating channel can be used to driven an N-channel power MOSFET or IGBT in the high side configuration which operates up to 600V. The logic inputs can... [See More]
- Number of Outputs: 1
- Supply Voltage: 10 to 18
- Driver Type: 600V High voltage High & Low-side, Gate Driver
- Operating Temperature: -40 to 125
from Quarktwin Technology Ltd.
LED Driver IC 1 Output DC DC Regulator Step-Up (Boost) PWM Dimming 50mA 24-TQFN (4x4) [See More]
- Number of Outputs: 1; 1
- Output Voltage: 14.5
- Output Configuration: Inverting; Step-Up (Boost)
- Output Current: 0.0500
from Utmel Electronic Limited
IC PIN DRIVER 40MHZ 3ST 8-SOIC [See More]
- Number of Outputs: 1; 1
- Supply Voltage: 12
- Output Current: 12
- Operating Temperature: -40 to 85
from ROHM Semiconductor GmbH
The BU64296GWX is designed to drive Bi-directional voice coil motors. Additionally the driver is able to source the output current without the need for a direction control signal. The driver includes ISRC (intelligent slew rate control) to reduce mechanical ringing to optimize the camera ’s... [See More]
- Number of Outputs: 1
- Output Current: 0.2000
- Driver Type: Bi-directional VCM driver for Auto focus
- Supply Voltage: 5.5
from ROHM Semiconductor USA, LLC
The BU64985GWZ is designed to drive Bi-directional voice coil motors. Additionally the driver is able to source the output current without the need for a direction control signal. The drivers include ISRC (intelligent slew rate control) to reduce mechanical ringing to optimize the camera ’s... [See More]
- Number of Outputs: 1
- Output Current: 0.0600
- Driver Type: Bi-directional VCM driver for Auto focus
- Supply Voltage: 2.5
from Quarktwin Technology Ltd.
LED Driver IC 1 Output DC DC Regulator Switched Capacitor (Charge Pump) Dimming 800mA (Flash) 12-TDFN (3x3) [See More]
- Number of Outputs: 1; 1
- Output Current: 0.8000
- Output Configuration: Inverting; Switched Capacitor (Charge Pump)
- Operating Temperature: -40 to 85
from Utmel Electronic Limited
IC: driver; high-side,gate driver; SO8; -500 ÷250mA; Channels: 1 [See More]
- Number of Outputs: 1; 1
- Supply Voltage: 9 to 12
- Driver Type: High-side
- Operating Temperature: -40
from ROHM Semiconductor GmbH
The BU64297GWZ is designed to drive Bi-directional voice coil motors. Additionally the driver is able to source the output current without the need for a direction control signal. The driver includes ISRC (intelligent slew rate control) to reduce mechanical ringing to optimize the camera ’s... [See More]
- Number of Outputs: 1
- Output Current: 0.2000
- Driver Type: Bi-directional VCM driver for Auto focus
- Supply Voltage: 5.5
from ROHM Semiconductor USA, LLC
The BM60016FV-C is a gate driver with an isolation voltage of 2500Vrms, I/O delay time of 75ns, and minimum input pulse width of 60ns. It incorporates the Under-voltage Lockout (UVLO) function and Miller clamp function. [See More]
- Number of Outputs: 1
- Output Current: 3
- Driver Type: Isolation voltage 2500Vrms 1ch Gate Driver Providing Galvanic Isolation
- Supply Voltage: 4.5 to 5.5
from Quarktwin Technology Ltd.
LED Driver IC 1 Output Linear Constant Current PWM Dimming 150mA 6-DFN (2x2) [See More]
- Number of Outputs: 1; 1
- Output Voltage: 15
- Output Configuration: Inverting; Constant Current
- Output Current: 0.1500
from Utmel Electronic Limited
INTERSIL EL7158ISZ IC PIN DRIVER IC, ULTRA HIGH CURRENT [See More]
- Number of Outputs: 1; 1
- Output Current: 12
- Driver Type: High-side
- Supply Voltage: 12
from ROHM Semiconductor GmbH
The BM60059FV-C is a gate driver with an isolation voltage of 2500Vrms. It has an I/O delay time of 450ns, minimum input pulse width of 400ns, and incorporates the fault signal output function, undervoltage lockout (UVLO) function, short circuit protection (SCP) function, active miller clamping... [See More]
- Number of Outputs: 1
- Supply Voltage: 4.5 to 24
- Output Current: 10
- Propagation Delay: 450
from ROHM Semiconductor USA, LLC
BD61243FV is a 1chip driver that is composed of H-bridge power DMOS FET. Moreover, the circuit configuration is restructured, and convenience has been improved by reducing the external parts and simplifying the setting compared with the conventional driver. [See More]
- Number of Outputs: 1
- Output Current: 1.2
- Driver Type: Multifunction Single-phase Full-wave Fan Motor Driver
- Supply Voltage: 18
from Quarktwin Technology Ltd.
LED Driver IC 1 Output AC DC Offline Switcher Flyback, Step-Down (Buck), Step-Up (Boost) Analog, PWM Dimming 8-SO [See More]
- Number of Outputs: 1; 1
- Output Voltage: 20
- Output Configuration: Inverting; Flyback, Step-Down (Buck), Step-Up (Boost)
- Switching Frequency: 150
from Utmel Electronic Limited
PWR MOD 180W GATE DRIVER 11-SIP [See More]
- Number of Outputs: 1; 1
- Output Current: 0.7000
- Output Voltage: 500
- Supply Voltage: 20
from ROHM Semiconductor GmbH
The BM61M41RFV-C is a gate driver with an isolation voltage of 3750 Vrms, I/O delay time of 65 ns, and minimum input pulse width of 60 ns. It has the Under-Voltage Lockout (UVLO) function and Miller clamp function. [See More]
- Number of Outputs: 1
- Supply Voltage: 4.5 to 5.5
- Output Current: 4
- Propagation Delay: 65
from ROHM Semiconductor USA, LLC
BD63005AMUV is a Three-Phase Brushless Motor Driver with a 33V power supply voltage rating and a 2A (3.5A peak) output current rating. It generates a driving signal from the Hall sensor and drives PWM through the input control signal. In addition, the power supply can use 12V or 24V and it has... [See More]
- Number of Outputs: 1
- Output Current: 2
- Driver Type: Three-phase
- Supply Voltage: 33
from Quarktwin Technology Ltd.
LED Driver IC 1 Output AC DC Offline Switcher Buck Analog, PWM Dimming 4A 8-SO-EP [See More]
- Number of Outputs: 1; 1
- Output Voltage: 600
- Output Configuration: Inverting; Buck
- Output Current: 4
from ROHM Semiconductor GmbH
BD61243FV is a 1chip driver that is composed of H-bridge power DMOS FET. Moreover, the circuit configuration is restructured, and convenience has been improved by reducing the external parts and simplifying the setting compared with the conventional driver. [See More]
- Number of Outputs: 1
- Output Current: 1.2
- Driver Type: Multifunction Single-phase Full-wave Fan Motor Driver
- Supply Voltage: 18
from Quarktwin Technology Ltd.
LED Driver IC 1 Output AC DC Offline Switcher Step-Down (Buck) Dimming 1A 7-SO [See More]
- Number of Outputs: 1; 1
- Output Voltage: 500
- Output Configuration: Inverting; Step-Down (Buck)
- Output Current: 1
from ROHM Semiconductor GmbH
BD61247NUX is a 1chip driver that is composed of H-bridge power DMOS FET. It realizes the quietness of the motor by PWM soft switching. [See More]
- Number of Outputs: 1
- Output Current: 1.2
- Driver Type: Multifunction Single-phase Full-wave Fan Motor Driver
- Supply Voltage: 18
from Quarktwin Technology Ltd.
LED Driver IC 1 Output AC DC Offline Switcher Flyback, Step-Down (Buck), Step-Up (Boost) Triac Dimming 3A 7-SO [See More]
- Number of Outputs: 1; 1
- Output Current: 3
- Output Configuration: Inverting; Flyback, Step-Down (Buck), Step-Up (Boost)
- Operating Temperature: -40 to 105
from ROHM Semiconductor GmbH
BD63015EFV is a three phase sinusoidal brushless motor driver. The rating of the power supply is 36V and that of current rating is 1.5A (peak current, 2A). PWM driving signals are generated by the three hall sensors. Input DC voltage signal can control the rotation speed, also, you can control by... [See More]
- Number of Outputs: 1
- Output Current: 1.5
- Driver Type: Three-phase
- Supply Voltage: 36
from Quarktwin Technology Ltd.
LED Driver IC 1 Output Linear PWM Dimming 1.5A 16-TSSOP-EP [See More]
- Number of Outputs: 1; 1
- Output Current: 1.5
- Output Configuration: Inverting
- Switching Frequency: 120
from ROHM Semiconductor GmbH
The BU64292GWZ is designed to drive Uni-directional voice coil motors. The driver includes ISRC (Intelligent Slew Rate Control) to reduce mechanical ringing to optimize the camera ’s autofocus capabilities. [See More]
- Number of Outputs: 1
- Supply Voltage: 4.5
- Output Current: 0.1000
- Operating Temperature: -25 to 85
from ROHM Semiconductor GmbH
The BU64982GWZ is designed to drive Uni-directional voice coil motors. The driver includes ISRC (Intelligent Slew Rate Control) to reduce mechanical ringing to optimize the camera ’s autofocus capabilities. [See More]
- Number of Outputs: 1
- Supply Voltage: 4.5
- Output Current: 0.1000
- Operating Temperature: -25 to 85