Flare Brush Wire Brushes
from Weiler Abrasives
Crimped wire fill which has been "pre-flared" to match the working angle of the brush at operating speed. Suited for addressing broad and slightly contoured surfaces. For use with die grinder and right angle air die grinder power tools [See More]
- Brush Type / Shape: End Brush; Flare Brush
- Applications: Manufacturing
- Brush Filament / Fill Material: Steel; Stainless Steel; Metal Wire
- Outer / OD: 0.0060
from Weiler Abrasives
Crimped wire fill which has been "pre-flared" to match the working angle of the brush at operating speed. Suited for addressing broad and slightly contoured surfaces. For use with die grinder and right angle air die grinder power tools [See More]
- Brush Type / Shape: End Brush; Flare Brush
- Applications: Manufacturing
- Brush Filament / Fill Material: Steel; Metal Wire
- Outer / OD: 0.0060
from Weiler Abrasives
Crimped wire fill which has been "pre-flared" to match the working angle of the brush at operating speed. Suited for addressing broad and slightly contoured surfaces. For use with die grinder and right angle air die grinder power tools [See More]
- Brush Type / Shape: End Brush; Flare Brush
- Applications: Manufacturing
- Brush Filament / Fill Material: Steel; Stainless Steel; Metal Wire
- Outer / OD: 0.0080
from Weiler Abrasives
Crimped wire fill which has been "pre-flared" to match the working angle of the brush at operating speed. Suited for addressing broad and slightly contoured surfaces. For use with die grinder and right angle air die grinder power tools [See More]
- Brush Type / Shape: End Brush; Flare Brush
- Applications: Manufacturing
- Brush Filament / Fill Material: Steel; Metal Wire
- Outer / OD: 0.0200
from Weiler Abrasives
Solid end construction with flexible brushing action. Crimped "Pre-Flared" wire fill to match the working angle of the brush at operating speed. Suited for addressing broad and slightly contoured surfaces. Crimped wire fill which has been "pre-flared" to match the working angle of the brush at... [See More]
- Brush Type / Shape: End Brush; Flare Brush
- Applications: Manufacturing
- Brush Filament / Fill Material: Steel; Stainless Steel; Metal Wire
- Outer / OD: 0.0060
from Weiler Abrasives
Crimped wire fill which has been "pre-flared" to match the working angle of the brush at operating speed. Suited for addressing broad and slightly contoured surfaces. For use with die grinder and right angle air die grinder power tools [See More]
- Brush Type / Shape: End Brush; Flare Brush
- Applications: Manufacturing
- Brush Filament / Fill Material: Steel; Metal Wire
- Outer / OD: 0.0060
from Weiler Abrasives
Crimped wire fill which has been "pre-flared" to match the working angle of the brush at operating speed. Suited for addressing broad and slightly contoured surfaces. For use with die grinder and right angle air die grinder power tools [See More]
- Brush Type / Shape: End Brush; Flare Brush
- Applications: Manufacturing
- Brush Filament / Fill Material: Steel; Stainless Steel; Metal Wire
- Outer / OD: 0.0080
from Weiler Abrasives
Crimped wire fill which has been "pre-flared" to match the working angle of the brush at operating speed. Suited for addressing broad and slightly contoured surfaces. For use with die grinder and right angle air die grinder power tools [See More]
- Brush Type / Shape: End Brush; Flare Brush
- Applications: Manufacturing
- Brush Filament / Fill Material: Steel; Metal Wire
- Outer / OD: 0.0080
from Weiler Abrasives
Crimped wire fill which has been "pre-flared" to match the working angle of the brush at operating speed. Suited for addressing broad and slightly contoured surfaces. For use with die grinder and right angle air die grinder power tools [See More]
- Brush Type / Shape: End Brush; Flare Brush
- Applications: Manufacturing
- Brush Filament / Fill Material: Steel; Stainless Steel; Metal Wire
- Outer / OD: 0.0200
from Weiler Abrasives
Crimped wire fill which has been "pre-flared" to match the working angle of the brush at operating speed. Suited for addressing broad and slightly contoured surfaces. For use with die grinder and right angle air die grinder power tools [See More]
- Brush Type / Shape: End Brush; Flare Brush
- Applications: Manufacturing
- Brush Filament / Fill Material: Steel; Metal Wire
- Outer / OD: 0.0200
from Weiler Abrasives
Crimped wire fill which has been "pre-flared" to match the working angle of the brush at operating speed. Suited for addressing broad and slightly contoured surfaces [See More]
- Brush Type / Shape: End Brush; Flare Brush
- Applications: Manufacturing
- Brush Filament / Fill Material: Steel; Metal Wire
- Outer / OD: 0.0060
from Weiler Abrasives
Heat stabilized black elastomer gradually wears exposing consistent short trim for maximum aggression and long-life. Ideal for applications on flat surfaces that require maximum aggression but no flexibility in the brushing action. For use with die grinder and right angle air die grinder power... [See More]
- Brush Type / Shape: End Brush; Flare Brush
- Applications: Manufacturing
- Brush Filament / Fill Material: Steel; Metal Wire
- Outer / OD: 0.0060
from Weiler Abrasives
Heat stabilized black elastomer gradually wears exposing consistent short trim for maximum aggression and long-life. Ideal for applications on flat surfaces that require maximum aggression but no flexibility in the brushing action [See More]
- Brush Type / Shape: End Brush; Flare Brush
- Applications: Manufacturing
- Brush Filament / Fill Material: Steel; Stainless Steel; Metal Wire
- Outer / OD: 0.0100
from Weiler Abrasives
Heat stabilized black elastomer gradually wears exposing consistent short trim for maximum aggression and long-life. Ideal for applications on flat surfaces that require maximum aggression but no flexibility in the brushing action [See More]
- Brush Type / Shape: End Brush; Flare Brush
- Applications: Manufacturing
- Brush Filament / Fill Material: Steel; Metal Wire
- Outer / OD: 0.0100
from Weiler Abrasives
Heat stabilized black elastomer gradually wears exposing consistent short trim for maximum aggression and long-life. Ideal for applications on flat surfaces that require maximum aggression but no flexibility in the brushing action. For use with die grinder, drill and right angle air die grinder... [See More]
- Brush Type / Shape: End Brush; Flare Brush
- Applications: Manufacturing
- Brush Filament / Fill Material: Steel; Metal Wire
- Outer / OD: 0.0200
from Weiler Abrasives
Crimped wire fill which has been "pre-flared" to match the working angle of the brush at operating speed. Suited for addressing broad and slightly contoured surfaces. Features a solid end construction that provides very flexible brushing action. For use with die grinder and right angle air die... [See More]
- Brush Type / Shape: End Brush; Flare Brush
- Applications: Manufacturing
- Brush Filament / Fill Material: Steel; Metal Wire
- Outer / OD: 0.0140
from Weiler Abrasives
Heat stabilized black elastomer gradually wears exposing consistent short trim for maximum aggression and long-life. Ideal for applications on flat surfaces that require maximum aggression but no flexibility in the brushing action [See More]
- Brush Type / Shape: End Brush; Flare Brush
- Applications: Manufacturing
- Brush Filament / Fill Material: Steel; Metal Wire
- Outer / OD: 0.0100
from Weiler Abrasives
Heat stabilized black elastomer gradually wears exposing consistent short trim for maximum aggression and long-life. Ideal for applications on flat surfaces that require maximum aggression but no flexibility in the brushing action. For use with die grinder, drill and right angle air die grinder... [See More]
- Brush Type / Shape: End Brush; Flare Brush
- Applications: Manufacturing
- Brush Filament / Fill Material: Steel; Metal Wire
- Outer / OD: 0.0200
from Weiler Abrasives
Crimped wire fill which has been "pre-flared" to match the working angle of the brush at operating speed. Suited for addressing broad and slightly contoured surfaces. For use with die grinder and right angle air die grinder power tools [See More]
- Brush Type / Shape: End Brush; Flare Brush
- Applications: Manufacturing
- Brush Filament / Fill Material: Steel; Stainless Steel; Metal Wire
- Outer / OD: 0.0080
from Weiler Abrasives
Crimped wire fill which has been "pre-flared" to match the working angle of the brush at operating speed. Suited for addressing broad and slightly contoured surfaces. For use with die grinder and right angle air die grinder power tools [See More]
- Brush Type / Shape: End Brush; Flare Brush
- Applications: Manufacturing
- Brush Filament / Fill Material: Steel; Metal Wire
- Outer / OD: 0.0080
from Weiler Abrasives
Crimped wire fill which has been pre-flared to match the working angle of the brush at operating speed. Suited for addressing broad and slightly contoured surfaces. For use with die grinder and right angle air die grinder power tools [See More]
- Brush Type / Shape: End Brush; Flare Brush
- Applications: Manufacturing
- Brush Filament / Fill Material: Steel; Metal Wire
- Outer / OD: 0.0200
from Weiler Abrasives
Crimped wire fill which has been "pre-flared" to match the working angle of the brush at operating speed. Suited for addressing broad and slightly contoured surfaces. For use with die grinder and right angle air die grinder power tools [See More]
- Brush Type / Shape: End Brush; Flare Brush
- Applications: Manufacturing
- Brush Filament / Fill Material: Steel; Metal Wire
- Outer / OD: 0.0060
from Weiler Abrasives
Crimped wire fill which has been "pre-flared" to match the working angle of the brush at operating speed. Suited for addressing broad and slightly contoured surfaces. For use with die grinder and right angle air die grinder power tools [See More]
- Brush Type / Shape: End Brush; Flare Brush
- Applications: Manufacturing
- Brush Filament / Fill Material: Steel; Stainless Steel; Metal Wire
- Outer / OD: 0.0080
from Weiler Abrasives
Crimped Wire Fill Which Has Been "Pre-Flared" to Match the Working Angle of the Brush At Operating Speed. Suited for Addressing Broad and Slightly Contoured Surfaces [See More]
- Brush Type / Shape: End Brush; Flare Brush
- Applications: Manufacturing
- Brush Filament / Fill Material: Steel; Metal Wire
- Outer / OD: 0.0080
from Weiler Abrasives
Crimped wire fill which has been "pre-flared" to match the working angle of the brush at operating speed. Suited for addressing broad and slightly contoured surfaces. For use with die grinder and right angle air die grinder power tools [See More]
- Brush Type / Shape: End Brush; Flare Brush
- Applications: Manufacturing
- Brush Filament / Fill Material: Steel; Metal Wire
- Outer / OD: 0.0140