Masking Compounds Stop Off Coatings and Masking Compounds
from Dymax
Light-curable SpeedMask ® 726-SC maskant offers excellent protection during surface finishing of metal components used in aerospace engines, orthopedic implants, and general masking applications. The resins are resistant to plating, anodizing, air-plasma spray, and grit-blasting, as well as... [See More]
- Type: Masking Compounds
- Industry: Medical
- Cure / Setting Technology: Ultraviolet Light Curing
from Ellsworth Adhesives
ACL Staticide Mighty Mask 8691 Peelable Solder Masking Agent is used for electronics and print circuit board manufacturing. It is fast curing, heat resistant, non-corrosive, and peels off easily. Pink, 8 oz Bottle. [See More]
- Type: Masking Compounds
- Operating Temperature: 509
- Coating Material: Acrylic; Rubber
from ELANTAS North America LLC
ELAN - Plus ™ MR 7402 is an opaque white paste that acts as a masking agent in order to protect surfaces that are not. intended to be coated during a painting or varnishing operation. It can be applied by brush, spatula, or a gloved hand,. and it requires no heat cure. Treated units can be... [See More]
- Type: Stop Offs; Masking Compounds
- Industry: Electronics
from Dymax
SpeedMask ® 9-20479-B-REV-A is a blue maskant that cures upon exposure to UV/Visible light for rapid masking of electronic components and assemblies. The product is easily removable, eliminating the concern of ionic contamination or silicone left behind by other methods. Typical applications... [See More]
- Type: Masking Compounds
- Substrate: Ceramic; Other; Lead frame; Ceramic; PCB; Flex; Silicon
- Cure / Setting Technology: Ultraviolet Light Curing
- Form: Blue transparent gel
from Ellsworth Adhesives
DYMAX E-MAX 776-SC Masking Resin is a heat resistant, see-cure protective mask that is used to provide surface protection during grit blasting, air plasma spray, powder coating, plating, etching and anodizing processes. It can be used on cobalt, nickel, titanium, steel, aluminum, and glass surfaces. [See More]
- Type: Masking Compounds
- Coating Material: Polyurethane; Acrylated urethane
- Cure / Setting Technology: Ultraviolet Light Curing
from Dymax
SpeedMask ® 9-318-F cures in seconds when exposed to UV/Visible light. This removable material is designed for rapid masking of electronic components and assemblies to protect from reflow or wave soldering operations. The maskant also shields keep-out areas during conformal coating... [See More]
- Type: Masking Compounds
- Substrate: Ceramic; Other; Lead frame; Ceramic; PCB; Flex; Silicon
- Cure / Setting Technology: Ultraviolet Light Curing
from Ellsworth Adhesives
DYMAX SpeedMask 750-SC Masking Resin is a high temperature, see-cure maskant that is used to provide surface protection during grit blasting, thermal spray coating, plasma spray, and HVOF processes. It can be used on cobalt chrome, nickel and titanium alloy surfaces. Purple color will turn to pink... [See More]
- Type: Masking Compounds
- Coating Material: Polyurethane; Acrylated Urethane
- Cure / Setting Technology: Ultraviolet Light Curing
from Dymax
Dymax SpeedMask ® 9-7001 protective maskant cures upon exposure to UV light in seconds and changes from pink to clear for easy visual confirmation of cure. The material provides one-layer protection for connectors and printed circuit board (PCB) surfaces during solvent-based or light-curable... [See More]
- Type: Masking Compounds
- Industry: Electronics
- Cure / Setting Technology: Ultraviolet Light Curing
from Ellsworth Adhesives
DYMAX Speedmask ® 9-20479-B-REV-A Peelable Masking Compound Blue is a one component, UV light curing, urethane gel that is used as a mask for reflow processes, wave solders, and conformal coatings. It is solvent free, silicone free, thixotropic, no VOCs, and can easily be removed. 15 L Pail. [See More]
- Type: Masking Compounds
- Operating Temperature: 129 to 302
- Coating Material: Polyurethane; Acrylated urethane
from Ellsworth Adhesives
DYMAX Speedmask ® 9-20479-B-REV-A Peelable Masking Compound Blue is a one component, UV light curing, urethane gel that is used as a mask for reflow processes, wave solders, and conformal coatings. It is solvent free, silicone free, thixotropic, no VOCs, and can easily be removed. 30 mL MR... [See More]
- Type: Masking Compounds
- Operating Temperature: 129 to 302
- Coating Material: Polyurethane; Acrylated urethane
from Ellsworth Adhesives
Dymax Speedmask ® E-MAX 906-B-REV-A Blue is a one component, UV light curing, urethane gel that is used as a mask for reflow processes, wave solders, and conformal coatings. It is solvent free, silicone free, thixotropic, no VOCs, and can easily be removed. 30 mL MR Syringe. [See More]
- Type: Masking Compounds
- Coating Material: Polyurethane; Acrylated urethane
- Cure / Setting Technology: Ultraviolet Light Curing
- Operating Temperature: -65 to 302
from Nylok Corporation
Nycote ® thread masking prevents weld spatter, electro-deposited paints, primers or coatings from adhering to the threads. Nylok ’s patented Nycote ® coating process provides an affordable and efficient way of protecting fastener threads from weld spatter and electro-deposited paints,... [See More]
- Type: Stop Offs; Masking Compounds
- Industry: Automotive; Electronics; Marine; OEM / Industrial; Process Equipment
- Substrate: Metallic
from R. S. Hughes Company, Inc.
3M 06834 masking liquid comes in red and is packaged 55 gal per inner, 1 per case. Cure time should always be considered on any application or project. Once applied, this product requires a 30 min cure time before it is fully set and provides maximum strength. [See More]
- Type: Masking Compounds
from Technic, Inc.
Black matte photoimagable solder mask for flexible substrates using roll to roll equipment. [See More]
- Type: Masking Compounds
- Industry: Electronics
from Henkel Corporation - Electronics
Multicore Spot-On is a temporary solder resistance designed to be used on printed circuit boards prior to soldering and will withstand fluxing and wave soldering operations. [See More]
- Type: Masking Compounds
from Composition Materials Co., Inc.
Simplify your Masking Process prior to surface preparation & finishing operations. Formulated to have no effect on alloys, CM Mask cures in seconds upon exposure to UV light; offering increased productivity, lower assembly costs and enhanced worker and environmental safety. When cured with UV... [See More]
- Type: Masking Compounds
- Form: Liquid
- Cure / Setting Technology: Ultraviolet Light Curing
- Industry: OEM / Industrial
from R. S. Hughes Company, Inc.
3M 06847 masking liquid comes in pink and is packaged 1 gal per inner, 4 per case. Cure time should always be considered on any application or project. Once applied, this product requires a 30 min cure time before it is fully set and provides maximum strength. [See More]
- Type: Masking Compounds
from Technic, Inc.
Liquid photoimageable solder mask/coverlay for Rigid-Flexible circuit panels. Easily passes industry flexibility testing (10,000x at 180 ° bending with 1/16 inch mandrel). Halogen free and RoHS compliant. 2 mil resolution capability for today's most advanced technologies. Excellent Copper, FR4... [See More]
- Type: Masking Compounds
- Industry: Electronics
from R. S. Hughes Company, Inc.
3M 06851 masking liquid comes in pink and is packaged 1 pail per inner, 1 per case. Cure time should always be considered on any application or project. Once applied, this product requires a 30 min cure time before it is fully set and provides maximum strength. [See More]
- Type: Masking Compounds
from Technic, Inc.
Liquid photoimageable solder mask for rigid circuit panels. Excellent cosmetic appearance, with a range of colors and surface finishes. Wide process latitude enabling fine image reproduction with clean PTH/via development. Resolution capability below 2 mils for ultra fine pitch solder dams. Superior... [See More]
- Type: Masking Compounds
- Industry: Electronics
from R. S. Hughes Company, Inc.
3M 06854 masking liquid comes in clear and is packaged 1 container per pack, 1 per case. Cure time should always be considered on any application or project. Once applied, this product requires a 30 min cure time before it is fully set and provides maximum strength. [See More]
- Type: Masking Compounds
from Technic, Inc.
Solvent free single pack thermal cure solder mask. Solvent Free, 100% solids. No VOC's, single pack/ use straight from the container. No mesh blockage. Superior resistance to all plated surface finishing processes. Meets or exceeds IPC SM 840C, Bellcore TR-NWT-000078, and MIL P55110D specifications. [See More]
- Type: Masking Compounds
- Industry: Electronics
from R. S. Hughes Company, Inc.
3M 06855 masking liquid comes in clear and is packaged 1 container per pack, 1 per case. Cure time should always be considered on any application or project. Once applied, this product requires a 30 min cure time before it is fully set and provides maximum strength. [See More]
- Type: Masking Compounds
from Technic, Inc.
UV curable Rigid/Flexible solder mask. Suitable for use on single, double sided, PTH, multilayer PC boards and flexible circuit boards. No bleed around exposed pads. Superior resistance to all plated surface finishing processes. UL File #E83246, rated 94V.0 with soldering limits of 20 seconds @ 260... [See More]
- Type: Masking Compounds
- Industry: Electronics
- Cure / Setting Technology: Ultraviolet Light Curing
from R. S. Hughes Company, Inc.
3M 06856 masking liquid comes in pink and is packaged 1 container per pack, 1 per case. Cure time should always be considered on any application or project. Once applied, this product requires a 30 min cure time before it is fully set and provides maximum strength. [See More]
- Type: Masking Compounds