-
Supplier: Utmel Electronic Limited
Description: RF AMPLIFIER 17GHZ-24GHZ 24TFQFN
- Package Type: Other
- RoHS Compliant: Yes
-
Supplier: Texas Instruments
Description: 2.4GHz Programmable Differential Amplifier with Gain Control 24-WQFN -40 to 85
- Device Type: Differential Amplifiers
- Package Type: Other
- RoHS Compliant: Yes
-
Supplier: Broadcom Inc.
Description: amplifiers when linear operation is required. At 40GHz, it provides 24dBm of output power (P-1dB), 20dB of gain, and a 32 dBm output third order intercept (OIP3).
- Amplifier Type: Other
- Applications: Mobile / Wireless Systems
- Frequency Range: 20000 to 45000 MHz
- MMIC Technology Required: Yes
-
-
Supplier: Broadcom Inc.
Description: The Avago MGA-43024 is a fully matched power amplifier (PA) for use in the WLAN 2401-2473 MHz band. Based on Avago’s proprietary 0.25um GaAs E-pHEMT technology, the device features high linearity, gain and power added efficiency (PAE) with built-in power detector. The MGA-43024 is an ideal
- Amplifier Type: Power Amplifier
- Applications: Mobile / Wireless Systems
- Frequency Range: 2401 to 2473 MHz
- Maximum Gain: 40.5 dB
-
Supplier: Texas Instruments
Description: 2.4 GHz Dual Programmable Differential Amplifier with Gain Control 36-WQFN -40 to 85
- Device Type: Differential Amplifiers
- Package Type: Other
- RoHS Compliant: Yes
-
Supplier: Custom MMIC
Description: The CMD291 is a wideband GaAs MMIC driver amplifier die which operates from 16 to 24 GHz. The broadband device is ideally suited for applications requiring high dynamic range. The CMD291 delivers 23 dB of gain with a corresponding output 1 dB compression point of +25.5 dBm and
- Amplifier Type: Other
- Frequency Range: 16000 to 24000 MHz
- MMIC Technology Required: Yes
- Maximum Gain: 23 dB
-
Supplier: Qorvo
Description: Qorvo's CMD291 is a wideband GaAs MMIC driver amplifier die which operates from 16 to 24 GHz. The broadband device is ideally suited for applications requiring high dynamic range. The CMD291 delivers 23 dB of gain with a corresponding output 1 dB compression point of +25.5 dBm
- Operating Range: Military
- Package Type: Other
- RoHS Compliant: Yes
-
Supplier: Qorvo
Description: Qorvo’s QPA0022 is a high-performance driver amplifier fabricated on Qorvo’s production 0.15 um pHEMT process (QPHT15). Covering 6 – 18 GHz, the QPA0022 provides 24 dB small signal gain and 25 dBm P1dB and saturated power of 26 dBm. In addition, the device can provide low IMD3
- Operating Range: Military
- Package Type: Other
- RoHS Compliant: Yes
-
Supplier: Qorvo
Description: Qorvo's CMD317C4 is a wideband GaAs MMIC driver amplifier housed in a leadless 4x4 mm surface mount package. The CMD317C4 is ideally suited for military, space and communications systems where small size and high linearity are needed. At 12 GHz the device delivers 16 dB of gain with a
- Operating Range: Military
- Package Type: Other
- RoHS Compliant: Yes
-
Supplier: Skyworks Solutions, Inc.
Description: The SKY65405-21 is an ultra Low-Noise Amplifier (LNA) intended for 2.4 GHz wireless receiver applications. Its industry-leading Noise Figure (NF), together with high linearity, makes it ideal as a first-stage LNA in 802.11b,g Wireless Local Area Network (WLAN) radios. Operating
- Amplifier Type: Low Noise Amplifier
- Frequency Range: 2400 to 2500 MHz
- Maximum Gain: 15 dB
- Maximum Operating Voltage: 3.3 volts
-
Supplier: Skyworks Solutions, Inc.
Description: The SE2622L is a 2.4 GHz power amplifier designed for use in the 2.4 GHz ISM band for wireless LAN applications. The device incorporates a power detector for closed loop monitoring of the output power. The SE2622L includes a digital enable control for device on/off
- Amplifier Type: Power Amplifier
- Applications: Other
- Frequency Range: 2400 to 2500 MHz
- Maximum Gain: 31.5 dB
-
Supplier: Qorvo
Description: Qorvo's QPA2609D is a high-performance, low noise MMIC amplifier fabricated on Qorvo’s production 90 nm pHEMT process (QPHT09). Covering 7 - 14 GHz, the QPA2609D provides 27 dB small signal gain and 1.1 dB noise figure. With a compact size of 2.4 x 1 mm, the amplifier can
- Amplifier Type: Low Noise Amplifier
- Applications: Military / Defense, SATCOM Amplifier
- Frequency Range: 7000 to 14000 MHz
- Maximum Gain: 27 dB
-
Supplier: Fairview Microwave Inc.
Description: manufactured with 2.4mm connectors and rated at 5.5 dB. Our 2.4mm wideband / broadband amplifier design has a 18 dB minimum gain and dB typical gain. Fairview Microwave RF medium power wide-band amplifier part number FMAM3268 is rated with a P1dB of 10 dBm. This radio
- Amplifier Type: Low Noise Amplifier
- Frequency Range: 18000 to 40000 MHz
- Minimum Gain: 18 dB
- Noise Figure: 5.5 dB
-
Supplier: Fairview Microwave Inc.
Description: Bm. This radio frequency medium power broad / wide band amplifier is constructed to be rated for a minimum frequency of 2 GHz and a maximum of 24 GHz. Additional specs on this medium power broad-band/wide-band amp from Fairview Microwave can be found in the details on the
- Amplifier Type: Power Amplifier
- Frequency Range: 2000 to 24000 MHz
- Gain Flatness: 0.7500 dB
- Input VSWR: 2.2 :1
-
Supplier: Fairview Microwave Inc.
Description: constructed to be rated for a minimum frequency of 17 GHz and a maximum of 24 GHz. Additional specs on this medium power broad-band/wide-band amp from Fairview Microwave can be found in the details on the wideband frequency RF amplifier datasheet specifications PDF above.
- Amplifier Type: Power Amplifier
- Frequency Range: 17000 to 24000 MHz
- Maximum Gain: 22 dB
- Output Intercept Point (IP3): 33 dBm
-
Supplier: Fairview Microwave Inc.
Description: version manufactured with SMA connectors and rated at 4.5 dB. Our SMA wideband / broadband amplifier design has a 30 dB minimum gain and 35 dB typical gain. Fairview Microwave RF medium power wide-band amplifier part number SPA-265-30-001-SMA is rated with a P1dB of 24.5 dBm.
- Amplifier Type: Power Amplifier
- Frequency Range: 12400 to 26500 MHz
- Maximum Gain: 35 dB
- Minimum Gain: 30 dB
-
Supplier: Skyworks Solutions, Inc.
Description: The SE2433T is a high-performance power amplifier, suitable for Zigbee technology applications, Bluetooth® signals (including low energy), and Bluetooth 1.0 signal applications. The SE2433T is designed for ease of use and maximum flexibility, with an integrated input match and a digital
- Amplifier Type: Power Amplifier
- Frequency Range: 2400 to 2500 MHz
- Maximum Gain: 22 dB
- Maximum Operating Voltage: 3.6 volts
-
Supplier: Marki Microwave LLC
Description: The ADM-9027CH is a wideband distributed low noise amplifier capable of providing 16 dB gain and +25 dBm OIP3 from 2 to 20 GHz and a low 2.5 dB typical noise figure from 7 to 18 GHz. The ADM-9027CH is an ideal linear signal amplifier for applications requiring low power
- Amplifier Type: Other
- Frequency Range: 2000 to 24000 MHz
- Package Type: Other
-
Supplier: Marki Microwave LLC
Description: The ADM-9027PSM is a wideband distributed low noise amplifier capable of providing 16 dB gain and +25 dBm OIP3 from 2 to 20 GHz and a low 1.8 dB typical noise figure from 8 to 16 GHz. The ADM-9027PSM is an ideal linear signal amplifier for applications requiring low power
- Amplifier Type: Other
- Frequency Range: 2000 to 24000 MHz
- Package Type: Surface Mount Technology (SMT), Other
-
Supplier: Utmel Electronic Limited
Description: IC OPAMP DIFF 2.4GHZ 24WQFN
- Device Type: Differential Amplifiers
- Package Type: Other
- RoHS Compliant: Yes
-
Supplier: Utmel Electronic Limited
Description: RF Amplifier GaAs HEMT WBand lo Noise amp, 24-40 GHz
- Package Type: Other
- RoHS Compliant: Yes
-
Supplier: Skyworks Solutions, Inc.
Description: Please note: this product is being discontinued and is not recommended for new designs.
- Amplifier Type: Power Amplifier
- Frequency Range: 2400 to 2500 MHz
- Maximum Gain: 28.2 dB
- Maximum Operating Voltage: 3.3 volts
-
Supplier: Utmel Electronic Limited
Description: TEXAS INSTRUMENTS CC2592RGVT RF/IF AMP, 24DB, 2.4GHZ-2.4835GHZ, VQFN
- Device Type: Instrumentation Amplifiers
- Package Type: Other
- RoHS Compliant: Yes
-
Supplier: Marki Microwave LLC
Description: The AMM-9861PSM is a wideband low noise amplifier capable of providing 11.7 dB gain and +24 dBm OIP3 with a low 2.5 dB typical noise figure. The AMM-9861PSM is an ideal linear signal amplifier for applications requiring low power consumption and small form-factors. This
- Amplifier Type: Low Noise Amplifier, Other
- Frequency Range: 3000 to 30000 MHz
- Package Type: Surface Mount Technology (SMT), Other
-
Supplier: Microchip Technology, Inc.
Description: -signal circuitry. The MMA023AA is an eight stage traveling wave amplifier. The amplifier has been designed for power, flat gain, and good return loss to 30GHz. The amplifier typically has 24.5dBm Psat and 17.5dB gain from 1.5- 20GHz, and 22dBm Psat from
- Package Type: Other
-
Supplier: Texas Instruments
Description: A 9 GHz, 2.4 KOhms Transimpedance Amplifier with RSSI 0-DIESALE -40 to 100
- IC Package Type: Other
- RoHS Compliant: Yes
- Supply Voltage: 3.3 V
- TJ: -40 to 100 C
-
Supplier: DigiKey
Description: RF Amplifier IC General Purpose 2MHz ~ 1.7GHz
- Amplifier Type: Low Noise Amplifier, Power Amplifier
- Frequency Range: 2 to 1700 MHz
- Maximum Gain: 20 dB
- Maximum Operating Voltage: 15 volts
-
Supplier: Quarktwin Technology Ltd.
Description: RF Amplifier IC General Purpose 2MHz ~ 1.7GHz
- Package Type: Other
- RoHS Compliant: Yes
-
Supplier: Richardson RFPD
Description: 24-31 GHz Power Amplifier
- Amplifier Type: Power Amplifier
- Frequency Range: 24000 to 31000 MHz
- Maximum Gain: 23 dB
- Maximum Operating Voltage: 6 volts
Find Suppliers by Category Top
Featured Products Top
-
Qorvo’s QPA0022 is a high-performance driver amplifier fabricated on Qorvo’s production 0.15 um pHEMT process (QPHT15). Covering 6 – 18 GHz, the QPA0022 provides 24 dB small signal gain and 25 dBm P1dB and saturated power of 26 dBm. In addition, the device can provide low IMD3 (read more)
Browse Amplifier and Comparator Chips Datasheets for Qorvo -
Qorvo's QPA0022D is a high-performance driver amplifier fabricated on Qorvo's production 0.15 um pHEMT process (QPHT15). Covering 6 – 18 GHz, the QPA0022D provides 24 dB small signal gain and 25 dBm P1dB with saturated power (read more)
Browse Amplifier and Comparator Chips Datasheets for Qorvo -
Qorvo's QPA2597 is a packaged driver amplifier using proven GaN on SiC technology. The QPA2597 operates from 2.0 to 6.0GHz and provides 32 dBm of output with 24 dB of small signal gain and 37 % power-added efficiency. Using GaN MMIC technology and plastic packaging, the QPA2597 provides (read more)
Browse Amplifier and Comparator Chips Datasheets for Qorvo -
1.8 GHz, 23 dB, High Output Hybrid Power Doubler, 24 V, 12.5 W The QPA3311 is a Hybrid Power Doubler amplifier module. The part employs GaAs/GaN die and is operated from 45 MHz to 1794 MHz. It provides excellent linearity and superior return loss performance with low noise and optimal reliability. (read more)
Browse Amplifier and Comparator Chips Datasheets for Qorvo -
performance: 27.5-43.5GHz - Typical Linear Gain: 19.5dB - Typical Noise Figure: 2.3dB - P1dB: +11dBm - Psat: +12dBm - OIP3: >+20dBm - DC bias: Vd=3.3V@Id=61mA - 24L QFN 4x4 - MSL1 (read more)
Browse RF Amplifiers Datasheets for Richardson RFPD -
Application 420 to 460 MHz UHF Short Range 902 to 928 MHz ISM 2.4 to 2.5 GHz ISM (read more)
Browse RF Amplifiers Datasheets for Richardson RFPD -
KRYTAR Announces New Compact, 2-Way Power Divider Covers 7 to 24 GHz KRYTAR, Inc., a leader in the design and production of ultra-broadband microwave components and test (read more)
Browse RF Power Dividers and RF Power Combiners Datasheets for KRYTAR, Inc. -
detector is provided for application feedback. The QPF4239 integrates a 2.4 GHz power amplifier (PA), single pole two throw switch (SP2T) and bypassable low noise amplifier (LNA) into a single device. (read more)
Browse RF Modules Datasheets for Qorvo -
GHz power amplifier (PA) with DC & RF power detectors, FCC edgeBoost BAW filter, transmit-receive switch (SP2T) and bypassable low noise amplifier (LNA) into a single device. (read more)
Browse RF Modules Datasheets for Qorvo -
coupler enables close loop power control and DPD optimization. The QM42655 integrates a multi-TX state 2.4 GHz Wi-Fi power amplifier (PA) that is also used for HP BT, single pole four throw switch (SP4T) ANT switch, bypassable low noise amplifier (LNA) with multiple RX states, and power coupler into a single device. (read more)
Browse RF Modules Datasheets for Qorvo
Conduct Research Top
-
Microwave Office Enables First Pass Design Success for World's Only Pocket-Sized Sports Radar Gun
instance of the product was designed through empirical methods and would have required multiple cut-and-try turns to optimize the robust performance of the oscillator and power amplifier and the matching between the two. With very tight budget and time-to-market pressures, rendering multiple board turns