Products & Services
See also: Categories | Featured Products | Technical Articles | More Information-
Supplier: Emerson Climate Technologies
Description: As government regulations become increasingly demanding and refrigerant continues to become more and more expensive, investing an effective refrigerant leak detection system is critically important — both from a code compliance and a financial perspective. Emerson offers a leak
- Computer Interface Options: Other
-
Supplier: SONOTEC Ultraschallsensorik Halle GmbH
Description: maintenance can also increase the operational reliability of equipment. The SONAPHONE is designed for the quick and simple detection of leaks in compressed air, inert gas and vacuum systems. The variety of devices in the range and the extensive accessories available enable this range
-
Supplier: KROHNE Messtechnik
Description: comprise the whole project management from consultation to integration and service support done by KROHNE. Product highlights PipePatrol offers those modules: - Leak Detection - Theft Detection - Tightness Monitoring - Predictive Modeling - Stress Monitoring - Pump Monitoring -
- Features: Other
- Specific Detectable Liquid Types: Petroleum Based Products / Fuels, Water
-
-
Supplier: Emerson Automation Solutions – Rosemount
Description: relied on water bath testing to verify the integrity of aerosol products. This technique, however, is costly, resource intensive and highly disruptive to production. Cascade’s CT2211 leak detection system detects and rejects leaking aerosol cans up to a rate of 500 cans per minute. The
- Operating Temperature: 50 to 86 F
- Local Interface: Computer Interface
- Computer Interface Options: Other
-
Supplier: Krueger Sentry Gauge Co.
Description: The Leak Type K Gauge is a reliable, vertical type leak monitor used for detecting leaks in the annular/interstitial space of a double wall above ground containment tank (AST's). Its simple mechanical design promotes durability, minimal upkeep, quick installation, and
- Detector Features: Built in Alarm Indicator
- Leak Detection Method: Mechanical Float Switch (Relay Contact)
-
Supplier: SONOTEC Ultraschallsensorik Halle GmbH
Description: The SONAPHONE RD ultrasonic detector provides quick and easy detection of minor leaks and seal failures. The mobile handheld device locates leaks in compressed air lines and in steam, gas and vacuum systems both safely and precisely. The SONAPHONE RD can also be used to inspect
- Operating Temperature: 14 to 140 F
- Local Interface: Digital Front Panel
- Display Type: Digital Readouts
- Leak Test Method: Ultrasonic Leak Detector
-
Supplier: Accuris
Description: Leak detection systems Part 5: Tank gauge leak detection systems
-
Supplier: HydraCheck Inc.
Description: The most effective method of finding fluid leaks in an industrial environment. Works effectively in any enclosed circulatory system where fluids are used for lubrication, hydraulics, cooling control or hydrostatic pressure testing. Fluorescent dyes also can reveal leaks in static
- Computer Interface Options: Other
-
Supplier: Accuris
Description: Leak detection systems - Part 5: Tank gauge leak detection systems
-
Supplier: Gems Sensors & Controls
Description: Designed for use in the annular space of double wall fiberglass tanks to detect hydrocarbon liquids. When hydrocarbons are present, a hydrocarbon wax pellet dissolves and closes a springloaded switch to signal a leak. This sensor is not reusable after exposure to hydrocarbons.
- Features: Other
- Specific Detectable Liquid Types: Petroleum Based Products / Fuels
- Output Options: Switch or Alarm Signal
-
Supplier: Asahi/America, Inc.
Description: LiquidWatch II® Series LiquidWatch II® is a highly modular leak detection system designed to detect water and volatile liquids using discrete probes with fast sensing response time. The system is expandable up to 64 probes and alarm relays. The system can monitor probes up to 20,000
-
Supplier: Transcat, Inc.
Description: Dwyer Instruments CLD20 Combustible Gas Leak Detection Meter/Ammonia
- Leak Test Method: Electronic Gas Detection
-
Supplier: Accuris
Description: Offshore leak detection
-
Supplier: Accuris
Description: Leak detection systems - Part 7: Requirements and test/assessment methods for interstitial spaces, leak detection linings and leak detection jackets
-
Supplier: Transcat, Inc.
Description: Product Highlights For methane and propane gas leak detection Indication of gas concentration on the display of the flue gas analyzer being used Measuring range: 0 to +10,000 ppm CH4 / C3H8 Each Unit Includes Gas leak detection probe
- Leak Test Method: Electronic Gas Detection
-
Description: system can detect within a short response time any excessive increase in the leak rate, enabling to decrease the number – hence the cost – of periodic leak checks while providing early leak detection.
- Number of Channels: 24
- Response Time: 27 seconds
- Operating Temperature: 41 to 104 F
- Operating Humidity: 80 %
-
Supplier: SONOTEC Ultraschallsensorik Halle GmbH
Description: The SONAPHONE R ultrasonic detector is designed for the quick and simple detection of small leaks and seal failures. The mobile hand-held device detects leaks in compressed air lines and in steam, gas and vacuum systems with reliability and precision. Furthermore, the SONAPHONE
- Display Type: Analog Meter or Indicator
- Local Interface: Digital Front Panel
- Leak Test Method: Ultrasonic Leak Detector
-
Supplier: HydraCheck Inc.
Description: Leak Tracker complete UV light fluorescent leak detection kit includes the LeakTracker high-intensity, UV LED flashlight, 8 oz (237 ml) of concentrated oil dye (glows yellow-green), UV absorbing glasses, GLO-AWAY Plus fluorescent dye cleaner, and a secure, durable carry case.
- Computer Interface Options: Other
-
Supplier: Gems Sensors & Controls
Description: Dependable Long Service Life Fits Small, Interstitial Spaces Easy Maintenance The Gems™ LS-10 liquid sensor accurately detects the presence of liquid in fiberglass double-wall tanks, containment sumps and double-wall pipes. Dry contact switching ensures dependability throughout its long service
- Operating Temperature: -40 to 176 F
- Leak Detection Method: Mechanical Float Switch (Relay Contact)
- Specific Detectable Liquid Types: Petroleum Based Products / Fuels, Water
- Output Options: Switch or Alarm Signal
-
Supplier: Oneida Research Services, Inc.
Description: ORS manufactures the HSHLD® Model 310 High Sensitivity Helium Leak Detection System, a Quadrupole Mass Spectrometer system for High Sensitivity Helium Leak Rate measurement to qualify your product to the latest, tighter leak rate requirements of Mil-Std-883, Method 1014.
- Local Interface: Computer Interface, Digital Front Panel
- Leak Test Method: Mass Spectrometer (Helium Leak Detector)
- Features: Self-calibrating
- Display Type: Video Display Terminal
-
Supplier: Wilcoxon Sensing Technologies
Description: Ultrasound leak detector, 40 kHz (±1.5 kHz) ultrasound receiver, headset, acoustic concentrators and extension probes for detecting airborne ultrasound, industrial carrying case. Detect leaks of any type of gas from vacuums, valves, steam systems, HVAC systems, and sealed cabins or
-
Supplier: ABB Measurement & Analytics
Description: Find leaks fast Performs measurements while driving at speeds up to 55 mph (88 kph) Survey mains and services with the same drive by Identifies attributes of emissions sources by measuring methane and ethane simultaneously Shares survey data with MicroGuard™ to enable pinpointing of
- Operating Temperature: 23 to 122 F
- Local Interface: Computer Interface
-
Supplier: HydraCheck Inc.
Description: The LeakTracker™ Plus is a high-quality, durable, cordless, 365 nm UV LED Leak Detection flashlight with advanced features like an adjustable focus, a longer runtime, and laser pointer for extreme accuracy in pinpointing leaks. The unit comes in a carry case with UV absorbing
- Computer Interface Options: Other
-
Supplier: ABB Measurement & Analytics
Description: Find leaks fast Leak surveyors no longer need to use slow, outdated and insensitive equipment to detect gas leaks within distribution pipelines, storage facilities, or anywhere within the natural gas infrastructure. This unique portable gas leak detection solution
- Operating Temperature: 23 to 122 F
- Local Interface: Computer Interface
-
Supplier: ABB Measurement & Analytics
Description: Find leaks fast Enables detection and mapping of natural gas leaks while flying with unprecedented speed, accuracy and reliability. Can detect, precisely locate, and estimate the size of natural gas leaks at a rate that covers 10-15 times more land area per minute than
- Operating Temperature: 32 to 113 F
- Local Interface: Computer Interface
-
Supplier: Heilind Electronics, Inc.
Description: COOLANT LEAK DETECTION SENSOR
-
Supplier: SAE International
Description: This SAE Standard applies to the application of ultraviolet leak detection to service mobile air-conditioning systems.
-
Supplier: SAE International
Description: This SAE Standard applies to the application of ultraviolet leak detection to service mobile air-conditioning systems.
-
Supplier: FPI Sensors International
Description: Specifications: Stem Material: Stainless Steel Float Material: Stainless Steel Maximum Temperature (F): 300 F PSI @ 70 Degrees F: 800 PSI Minimum Liquid Specific Gravity: .7 Switch Max Wattage Rating at 250V: 50 Watt Leads: 24" PVC Common Options: Lead Length SPDT Switch Thermocouple 0.93 Specific
- Number of Switch Points: 1 (#)
- Maximum Operating Pressure: 800 psi
- Material Temperature Range: 300 F
- Maximum AC Voltage: 250 volts
-
Supplier: Gems Sensors & Controls
Description: Dependable Long Service Life Fits Small, Interstitial Spaces Easy Maintenance The Gems™ LS-10 liquid sensor accurately detects the presence of liquid in fiberglass double-wall tanks, containment sumps and double-wall pipes. Dry contact switching ensures dependability throughout its long service
- Number of Switch Points: 1 (#)
- Material Temperature Range: -40 to 176 F
- Maximum DC Voltage: 100 volts
- Features: Electromechanical Switch, Normally Closed (NC)
-
Supplier: SAE International
Description: This SAE Standard applies to dyes intended to be introduced into a mobile air-conditioning system refrigerant circuit for the purpose of allowing the application of ultraviolet leak detection. In order to label any product(s), they shall meet SAE J2297, the certification process as
-
Supplier: SAE International
Description: This SAE Standard applies to fluorescent refrigerant leak detection dye injection equipment for use in ultraviolet leak detection when servicing mobile air-conditioning systems.
-
Supplier: SONOTEC Ultraschallsensorik Halle GmbH
Description: The SONAPHONE M is designed for the rapid, reliable and cost-effective detection of seal failures and the smallest of leaks within compressed air systems and networks, vacuum systems, industrial equipment and machinery and covered pipes with restricted access. The ultrasonic
- Operating Temperature: 14 to 140 F
- Local Interface: Digital Front Panel
- Display Type: Digital Readouts
- Leak Test Method: Ultrasonic Leak Detector
-
Supplier: CO2Meter.com
Description: The AM4203-FC A2L Refrigerant Leak Detection Sensor detects A2L gases (including R32, R454A, R454B and R454C), and A3 gas R290. Based on NDIR (Non-Dispersive Infrared) technology, AM4203 Series could detect and monitor refrigerant gas leakage and provide early warning. It has the
- Measurement Type: %Volume
- Features: Other
- Number of Gases Monitored: Single Gas
-
Supplier: Shenzhen Jewellok Technology Co., Ltd.
Description: Automated Valve Manifold Box with Leak Detection for Toxic and Flammable Semiconductor Process Gases The Automated Valve Manifold Box (VMB) is an essential safety and distribution hub designed specifically for the high-stakes environment of semiconductor fabrication. When handling
- Application: Gas
- Body Material: Stainless Steel
Find Suppliers by Category Top
Featured Products Top
-
Leak detection in process piping can be a complicated part of any system, so why should it be used? The simple answer is that we are stewards of our environment and responsible for people's safety. However, it has much more nuance than such a simple statement can capture, so here (read more)
Browse Liquid Leak Detectors Datasheets for Asahi/America, Inc. -
HydraCheck's Industrial Leak Detection Starter Kit is the most effective method of finding fluid leaks in an industrial environment. The starter kit is a perfect way to get into using oil dyes in your hydraulic system. Works effectively in any enclosed circulatory system where (read more)
Browse Leak Testing Equipment Datasheets for HydraCheck Inc. -
Interested in how Agilent Vacuum and Leak Detection support Lithium-Ion Battery Manufacturing? Learn how they are used in the battery production cycle, base material mixing, vacuum drying, electrode degassing, electrolyte filling, battery housing (read more)
Browse Leak Testing Equipment Datasheets for Agilent Technologies - Vacuum Products -
Agilent offers a vast range of state-of-the-art helium detectors that ensure safety, security, and consistent performance of research, vacuum, and industrial process systems. Our Helium Leak Detector (HLD), PHD-4 and Multi-Gas CrossLab sniffers are rugged, precise, and easy-to-use instruments (read more)
Browse Leak Testing Equipment Datasheets for Agilent Technologies - Vacuum Products -
ultrasonic Flooded Member Detection (FMD) solution. Flooded Member Detection is an inspection regime designed to screen an offshore platform’s underwater structures for flooding in members. A cracked weld, for example, can allow seawater to ingress into the member, which may create a (read more)
Browse Leak Testing Equipment Datasheets for Cygnus Instruments Limited -
Agilent expertise, combined with our vacuum and leak detection products, can help optimize cryogenic tank operation and improve liquefied gas management to make it more efficient. Read more here: https://www.agilent.com/en/solutions/applications-of-vacuum-technology/vacuum-for-industrial-process-manufacturing/liquified-natural-gas-cryotanks-insulation (read more)
Browse Leak Testing Equipment Datasheets for Agilent Technologies - Vacuum Products -
All standard part numbers and special assemblies are 100% Helium Leak tested and guaranteed to Ultra High Vacuum (UHV) standards. Helium mass spectrometer leak detection is the most common form of leak detection used to qualify assemblies for high vacuum and ultra-high vacuum (read more)
Browse Hermetic Sealing Services Datasheets for MPF Products, INC. -
E-Labs knows how critical Helium Leak Detection is for industries and any field where high vacuum or gas-tight systems are essential. We have multiple Varian, Mass Spectrometer helium leak detectors for finding leaks as small as 1x10-10 cc/sec. We are capable of leak testing to pressures (read more)
Browse Flow and Pressure (Fluid Dynamics) Testing Services Datasheets for E-Labs, Inc. -
Find the answers to your vacuum and leak detection technology questions in Agilent's easy-to-use webinar library. Sign up for upcoming events or view recorded webinars at your convenience. Bookmark this page - you'll want to come back to it frequently! (read more)
Browse Vacuum Pumps and Vacuum Generators Datasheets for Agilent Technologies - Vacuum Products -
Sustainability in the Vacuum Industry: a Guide to Agilent Vacuum and Leak Detection Green Solutions.
(read more)
Browse Vacuum Pumps and Vacuum Generators Datasheets for Agilent Technologies - Vacuum Products
Conduct Research Top
-
Pressure Sensors for Leak Detection
Different methodologies exist for creating leak detection systems. In this blog post, we will focus on leak detection using a pressure decay method which is ideal for detecting very small leak rates. The test part is pressurized from a pressure source. At the first X under "Balance" in the chart
-
Leak Detection in Pipelines
Hoffer Flow Controls continues to supply many "insertion" type turbine flowmeters to the petroleum pipeline industry. This type of meter is commonly used for leak detection and not custody transfer. Custody transfer applications are addressed with "in-line" axial flowmeters such as the Hoffer API
-
CO2 Leak Detection in Refrigeration Applications
Not all CO2 monitors are suitable for leak detection in refrigeration applications. Sensors need to respond quickly to CO2 levels. CO2 has a high operating pressure, and gases can quickly escape into refrigerated spaces at high rates. Instrumentation designed to monitor for gradual changes
-
Redefining Aerosol Leak Detection with Speed, Accuracy, and Reliability
Aerosol manufacturers are looking to improve safety, lower risk, and increase quality while ensuring compliance and profitability of their production lines. Emerson's Cascade Aerosol Micro Leak Detection Systems use Quantum Cascade Laser (QCL) Technology to deliver the most sophisticated leak
-
Oil and Gas Pipeline Leak Detection Solution
spills, and helps reduce operational costs. Industry actors commonly employ ultrasonic leak detection technology, due to its efficiency and accuracy, in the non-destructive testing of pipelines in an effort to meet these challenges.
-
The Latest Natural Gas Leak Detection Technology
by suffocation by displacing Oxygen (O2). It is also naturally odorless, colorless, and tasteless, making it very difficult to detect. New technologies addressing natural gas leak detection can help workplaces remain safer.
-
Underground Leak Detection: An Opportunity for Technology Integration (.pdf)
underground. A brief overview about the principles and methodology of underground leak detection will be followed by actual case histories.
-
Why WaterCop? Discover Benefits That Go Beyond Leak Detection
A growing number of homeowners (and second home owners) are installing leak detection device systems to help protect their properties from water damage. However, it is important to keep in mind that not all home leak detection systems are created equal. Here's how you can make sure you are getting
-
The Role of IoT in Revolutionizing Leak Detection: A Closer Look at Smart Sensors
In the quest for smarter and safer living spaces, the development and integration of the Internet of Things (IoT) has transformed traditional leak detection systems into intelligent networks of interconnected smart sensors. The emergence of IoT-driven leak detection solutions is revolutionizing
More Information Top
-
Hazard Analysis Database report
Flush pit, service pit, caisson, leak detection pit "Example of facility type code for tanks: The letter T indicates that the facility is a tank of some kind.
-
Code of Federal Regulations > Title 40 - Protection of Environment > Clean Air Act / Air Programs (CAA) > [40 CFR Part 63] National Emission Standards for Haza...
What do I need to know about the design specifications, installation, and operation of a bag leak detection system?
-
Code of Federal Regulations > Title 40 - Protection of Environment > Clean Air Act / Air Programs (CAA) > [40 CFR Part 60] Standards of Performance for New Sta...
Alternative standards for valves-skip period leak detection and repair .
-
AWWA M36 - Water Audits and Loss Control Programs
consistent sounding capabilities for effective leak detection , 104 .
-
Requirements Verification Report AN Farm to 200E Waste Transfer System for Project W-314 Tank Farm Restoration and Safe Operations
Appendix C: Requirements Verification for PDS-003, Pit Leak Detection ..
-
Requirements verification report for 241-AW tank farm upgrades project W-314 tank farm restoration and safe operations
3, Project Development Specification for Pit Leak Detection .
-
Requirements Verification Report AN Farm to 200 E Waste Transfer System for Project W-314 Tank Farm Restoration & Safe Operations
RequirementsVerification for PDS-003, Project Development Specificationfor Pit Leak Detection .
Indicates content that may require registration and/or purchase.