-
Supplier: Master Bond, Inc.
Description: temperatures e.g. 1 hour at 250°F (125°C) or 30-40 minutes at 300°F (150°C). The standard thickness is 3 mils, although other thicknesses are available. The film processes very easily and squeeze out during bonding is minimal. Master Bond FL901S has excellent electrical
- Chemical / Polymer System Type: Epoxy (EP)
- Coeff. of Thermal Expansion (CTE): 3.33E-5 to 1.11E-4 µin/in-F
- Cure Type / Technology: Thermosetting / Crosslinking, Single Component System
- Features: Electrically Conductive, EMI / RFI Shielding Material, Thermal / Heat Conductive, Anti-static / ESD Control
-
Supplier: Infinity Tapes, LLC
Description: Polyester (PET) Clear, Matte, or Metalized Film coated on one side with our easy release silicone coating ATTRIBUTES Higher temperature resistance than BOPP or HDPE Thickness from 1 mil Coated one side silicone (c/1/s) or coated two sides silicone (c/2/s
- Features: Low Transfer / Extractable, Transparent
- Thickness: 0.0254 mm
- Type: Other
- Width: 12.7 to 1219 mm
-
Supplier: Infinity Tapes, LLC
Description: Polyester (PET) Clear, Matte, or Metalized Film coated on one side with our easy release silicone coating ATTRIBUTES Higher temperature resistance than BOPP or HDPE Thickness from 1 mil Coated one side silicone (c/1/s) or coated two sides silicone (c/2/s
- Features: Transparent
- Film Material: PET / Polyester
- Thickness: 1.00E-3 inches
- Types: Coated
-
-
Supplier: Infinity Tapes, LLC
Description: Polyester (PET) Clear, Matte, or Metalized Film coated on one side with our easy release silicone coating ATTRIBUTES Higher temperature resistance than BOPP or HDPE Thickness from 1 mil Coated one side silicone (c/1/s) or coated two sides silicone (c/2/s
- Film Material: PET / Polyester
- Thickness: 1.00E-3 inches
- Types: Coated, Metallized
- Width: 0.5000 to 48 inches
-
Supplier: Infinity Tapes, LLC
Description: Polyester (PET) Clear, Matte, or Metalized Film coated on one side with our easy release silicone coating ATTRIBUTES Higher temperature resistance than BOPP or HDPE Thickness from 1 mil Coated one side silicone (c/1/s) or coated two sides silicone (c/2/s
- Film Material: PET / Polyester
- Thickness: 1.00E-3 inches
- Types: Coated, Metallized
- Width: 0.5000 to 48 inches
-
Supplier: Aitech Defense Systems, Inc.
Description: Rugged/mil 3U CompactPCI single slot SBC - low power version Rugged/mil 3U CompactPCI Single Slot SBC PowerPC® 7448 Processor at 1.4 GHz with Altivec Technology 200 MHz MPX Bus Fully PICMIG 2.0, Rev. 3.0 Compliant Marvell MV64460
-
Supplier: Accuris
Description: PROVISIONS FOR EVALUATING QUALITY OF CAPS, GARRISON, MEN\x92S
-
Supplier: Accuris
Description: TRANSFORMER, AND INDUCTORS (AUDIO, POWER AND HIGH-POWER PULSE), INDUCTOR, POWER, TYPE TF5S04ZZ901
-
Supplier: General Digital Corporation
Description: , NTSC, S-Video Serial Digital Interfaces (HD-SDI, SD-SDI) STANAG 3350 A, B and C and/or RS-170 support Gaskets available as standard or custom types to augment performance EMI, watertight and dessicating gaskets Options include: touch
- Color: Color, Monochrome
- Diagonal Screen Size: 19 to 20.1 inch
- Environmental Temperature: 32 to 122 F
- Features: Picture in Picture, Ruggedized Housing, Zoom Capabilities
-
Supplier: General Digital Corporation
Description: , NTSC, S-Video Serial Digital Interfaces (HD-SDI, SD-SDI) STANAG 3350 A, B and C and/or RS-170 support Gaskets available as standard or custom types to augment performance EMI, watertight and dessicating gaskets Options include: touch
- Color: Color, Monochrome
- Diagonal Screen Size: 19 to 20.1 inch
- Environmental Temperature: 32 to 122 F
- Features: Picture in Picture, Ruggedized Housing, Zoom Capabilities
-
Supplier: General Digital Corporation
Description: , NTSC, S-Video Serial Digital Interfaces (HD-SDI, SD-SDI) STANAG 3350 A, B and C and/or RS-170 support Gaskets available as standard or custom types to augment performance EMI, watertight and dessicating gaskets Options include: touch
- Color: Color, Monochrome
- Diagonal Screen Size: 19 to 20.1 inch
- Environmental Temperature: 32 to 122 F
- Features: Picture in Picture, Ruggedized Housing, Zoom Capabilities
-
Supplier: Accuris
Description: SHOCK TESTS, H.I. (HIGH-IMPACT) SHIPBOARD MACHINERY, EQUIPMENT, AND SYSTEMS, REQUIREMENTS FOR
-
Supplier: Aitech Defense Systems, Inc.
Description: Rugged/mil CompactPCI single slot SBC Rugged/mil 3U CompactPCI Single Slot SBC PowerPC® 7448 Processor at 1.4 GHz with Altivec™ Technology 200 MHz MPX Bus Fully PICMIG 2.0, Rev. 3.0 Compliant Marvell MV64460 Discovery™ III System
-
Supplier: Powerstar UPS Inc.
Description: Ethernet card for Telnet, Http, SNMP. NEW 2 Line LCD TEXT readout of Status /Alarms. Optional Master Bypass switch connects input directly to output jacks. Built with our EXTREME Ruggedization for MIL-STD-901D grade A and MIL-STD-167 compliance. Includes Premium 8-10year life
- Compliance: UL 1449 Rated Surge Protection, Grade MIL 901 / 167, FCC, UL, Other
- Protection: Over Voltage, Power Failure, Short Circuit, Surge, Voltage Sags, Under Voltage
- Technology: Line-Interactive, Other
- UPS Type: Single Phase
-
Supplier: Powerstar UPS Inc.
Description: Newly Revised Electronics. Now with LCD Text readout on Front panel displays Alarms /Status. PS2201SSr2 gradeA is tested for MIL901D-A , MIL167. Fully ruggedized in Stainless steel case, Barge tested, normally (2) MS3102R16-10S (6) 5-15R but options available, Long Life
- Compliance: UL 1449 Rated Surge Protection, Grade MIL 901 / 167, FCC, UL, C-UL Listing Mark, Other
- Protection: Over Voltage, Power Failure, Short Circuit, Surge, Voltage Sags, Under Voltage, Other
- Technology: Line-Interactive
- UPS Type: Single Phase
-
Supplier: Abbott Technologies, Inc.
Description: 200 Watt AC-DC Switchers Power Factor Correction Fully compliant with MIL-STD 461D, CE101, CE102 Meets MIL-S-901 (High Impact shock) Meets MIL-STD-810F FCC 20780 class A EMI compliance Compact PCI option available IP67 sealed option available
- AC Input Voltage: 95 to 260 volts
- DC Output Current: 7.14 to 16.66 amps
- DC Output Power: 200 watts
- DC Output Voltage: 12 to 28 volts
-
Supplier: Abbott Technologies, Inc.
Description: 200 Watt Enclosed AC-DC Switcher Power Factor Correction Fully compliant with MIL-STD-461E, CE101, CE102 Meets MIL-S-901 (High Impact shock) Meets MIL-STD-810F FCC 20780 class A EMI compliance Fully sealed to meet IP65 (Optional connectors available to meet IP67)
- AC Input Voltage: 95 to 260 volts
- DC Output Current: 7.14 to 16.66 amps
- DC Output Power: 200 watts
- DC Output Voltage: 12 to 48 volts
-
Supplier: Abbott Technologies, Inc.
Description: Low Insertion Loss Built-in Ground Bonding Enhanced Electrostatic Shielding Option Screw or solder terminals, Circular connectors, D-Sub Built to meet applicable portions ofMIL-PRF-28861; MIL-F-18327; MIL-PRF15733 Tests in accordance with MIL-STD-202; MIL-STD-220;
- Approvals: MIL-SPEC
- Filter Type: Single Phase, Three Phase, DC
- Package / Mounting: Stand Alone, Flange Mounted
- Rated Current: 1000 amps
-
Supplier: Powerstar UPS Inc.
Description: PS2201SS in Stainless steel case, Newly Revised SMT Electronics. Now with LCD Text readout on Front panel displays Alarms /Status. normally (2) MS3102R16-10S (6) 5-15R but options available, Long Life and High temp batteries avail to increase temperature range.Standard batteries rated 0° to
- Compliance: UL 1449 Rated Surge Protection, Grade MIL 901 / 167, FCC, UL, C-UL Listing Mark, Other
- Protection: Over Voltage, Power Failure, Short Circuit, Surge, Voltage Sags, Under Voltage, Other
- Technology: Line-Interactive
- UPS Type: Single Phase
-
Supplier: SIE Computing Solutions, Inc.
Description: Front loading Up to 500 watts Fixed mount drive options EMI viewing window options Fan Fail Tach Alarm Board option Hot Swap/Redundant option Power and air flow monitoring Designed to meet the requirements of Mil-S-901D, Mil-S-167, Mil-S-461, and Mil-S-810
- Backplane Bus / Standard: Other
- CE / FCC Certified: Yes
- Cooling Fans: 2
- Indicator Options: Temperature Alarm Indicator, Chassis Fan Failure Indicator
-
Supplier: Abbott Technologies, Inc.
Description: 500-2000 Enclosed Watt AC-DC Switchers Power Factor Correction Fully compliant with MIL-STD 461D, CE101, CE102 Meets MIL-S-901 (High Impact shock) Meets MIL-STD-810F FCC 20780 class A EMI compliance Fully sealed to meet IP65 Meets MIL-STD-1399 (spike voltage test)
- AC Input Voltage: 95 to 260 volts
- DC Output Current: 10.4 to 35 amps
- DC Output Power: 500 watts
- DC Output Voltage: 12 to 48 volts
-
Supplier: Specialty Product Technologies
Description: The EA780 switches have sliding, double break type contacts built to meet the high shock requirements outlined in MIL-S-901. The EA780 switches are available in two contact arrangements 1 N.O. - 1 N.C. & 2 N.O. - 2 N.C. The Standard B1 cam provides for cl.
- Actuator Movement: Clockwise, Counterclockwise
- Actuator Type: Cam Type
- Contact Type: Maintained Contact
- Enclosed Switch Housing: Yes
-
Supplier: Rugged Information Technology
Description: is fully qualified to MIL-STD-167-1 vibration and MIL-S-901 shock requirements. The RLP5400S is powered by a high-volume print engine that produces 600 x 1200 dpi output at print speeds up to 24 ppm (monochrome) and 16 ppm (color). The printer is packaged in a shock and
- Mounting Options: Rack Mounted
- Printer Type: Laser Printer
-
Supplier: Rugged Information Technology
Description: MIL-STD-167-1 vibration and MIL-S-901 shock requirements. The RLP6150S is powered by a high-volume print engine that produces 600 x 1200 dpi output at print speeds up to 32 ppm (monochrome) and 26 ppm (color). The printer is packaged in a shock and vibration isolated,
- Mounting Options: Rack Mounted
- Printer Type: Laser Printer
-
Supplier: Rantec Power Systems Inc.
Description: -STD-810 environments, MIL-STD-461 EMI, and MIL-S-901 shock. Three regulated outputs Logic On/Off Up to 185W total Conduction cooled Fixed frequency operation Extremely low thermal resistance Parallel with current sharing (main output
- DC Output Power: 185 watts
- Number of Outputs: 3 #
- Type: DC Power Supply, DC/DC Converter
-
Supplier: HDT Global
Description: to house M98 particulate/gas filter sets for removal of toxic CBR agents under the harshest environmental conditions. They are qualified to high-impact military shock (Mil-S-901) and vibration (Mil-Std-167) in housing lengths to five (5) filters deep. The U.S. Navy CBR
-
Supplier: HDT Global
Description: to house M98 particulate/gas filter sets for removal of toxic CBR agents under the harshest environmental conditions. They are qualified to high-impact military shock (Mil-S-901) and vibration (Mil-Std-167) in housing lengths to five (5) filters deep. The U.S. Navy CBR
- Construction: Cartridge Filter
- Frame / Assembly: Yes
- HEPA / ULPA Filter: Yes
- Length: 8.9 inch
-
Supplier: Enidine Inc.
Description: quality and all products are capable of the industry standards DEF-STND 0755, MIL-STD-810, BV43-44, MIL-STD-167, STANAG-042, MIL-S-901, and MIL-E-5400. Both compact wire rope isolators and wire rope isolators can be used on galley components where motors and fans
- Application: Vibration Isolation
- Features: Anchoring Holes, Metric Design, Oil Resistant, Stainless Steel Construction, Other
- Height or Thickness (Before loading): 3.25 inch
- Machine Mount Type: Other
-
Supplier: Powerstar UPS Inc.
Description: TEXT readout of Status or Alarms. Optional Master Bypass switch. Painted steel cover. Built with our standard Ruggedization or other models take it to MIL-STD-901D-A rating. Standard batteries rated 5 year 0° to 40°C. Premium cells rated for 10 year -15° to +50°C. X series -40 to+60°C
- Features: Application Software Included?, Audible Alarms?, Automatic Restart?, Automatic Shutdown?, Bypass Switch?, Hot-swappable Batteries?, LCD or LED Display?, Self-diagnostics?
- Input Voltage Range: 75 to 154 volts
- Interfaces: Serial, Ethernet, Other
- Mounting: Tower Type, Other
-
Supplier: Rantec Power Systems Inc.
Description: -STD-810 environments, MIL-STD-461 EMI, and MIL-S-901 shock. Up to 250W output Conduction cooled High density 58W/in3 Extremely low thermal resistanc Wide operating temperature range: –55°C to 95°C Fixed frequency operation
- DC Output Power: 250 watts
- Type: DC Power Supply, DC/DC Converter
-
Supplier: Rantec Power Systems Inc.
Description: -STD-810 environments, MIL-STD-461 EMI, and MIL-S-901 shock. Conduction cooled High density 78W/in3 Extremely low thermal resistance Fixed frequency operation Ruggedized meets MIL-STD-810C Parallel with current sharing Wide operating
- Type: DC Power Supply, DC/DC Converter
-
Supplier: Rantec Power Systems Inc.
Description: -STD-810 environments, MIL-STD-461 EMI, and MIL-S-901 shock. Rantec HDM module with Interface Card Additional outputs and configurations available True Plug-and-Play Wide input voltage range Ideal for use in development-will transition to production
- Type: DC Power Supply, DC/DC Converter
-
Supplier: Hoffer Flow Controls, Inc.
Description: find out how Hoffer turbine flowmeters can resolve your challenging subsea flow applications. OUTSTANDING FEATURES Operating depths to 20,000 FT or more. Robust flowmeter internals built to meet Military standards for high shock (MIL-S-901D) and vibrations (MIL
- Liquid Volumetric Flow Rate: 0.0625 to 15000 GPM
- Electrical Output: Analog Current, Analog Voltage, Frequency
- End Fittings: Compression, Flanged, Plain End, Socket Weld / Union, Threaded, Tube End / Hose Nipple
- Interface Options: Serial / Digital
-
Supplier: TE Connectivity
Description: Body Features Primary Product Material : Corrosion Resisting Steel Primary Product Plating Material : Passivated (SAE AMS-QQ-P-35 or MIL-S-5002) Dimensions Cable Entry Diameter : .2
-
Supplier: ASTM International
Description: regulations. 1.2 This equipment design has been shock tested in accordance with MIL-S-901 as follows: 1.2.1 Grade B, 1.2.2 Light weight, 1.2.3 Mounting fixture (4A), 1.2.4 Class I, and 1.2.5 Test Report No. (Letter N-2027/9936 SER 2004622, dated Sept. 24, 1985 ). 1.3 The values stated
-
Supplier: ASTM International
Description: . This specification also provides guidelines for shock test before conducting a fire resistance test. In the shock test, the fire resistant divisions, bulkheads and decks shall be tested according to the specifics required by the MIlL-S-901D, Section 3.2.1 (b) Medium Weight Shock
-
Supplier: ASTM International
Description: . This specification also provides guidelines for shock test before conducting a fire resistance test. In the shock test, the fire resistant divisions, bulkheads and decks shall be tested according to the specifics required by the MIlL-S-901D, Section 3.2.1 (b) Medium Weight Shock
-
Supplier: ELMA Electronic Inc.
Description: MIL-S- 901D - Shipboard shock/vib MIL-STD: 810G Shock MIL-STD: 167 - Vibration MIL-STD: 461 – EMC / EMI Arema and Cenelec DO-254
- Mounting Type: Free Standing Cabinet
- Shape: Rectangular
-
Supplier: ELMA Electronic Inc.
Description: optional) Vibration resistant hardware Independent, removable side, top panel, bottom panel and doors Integrated cable management, power conditioning and cooling options Standards Meet: NEBS Leval 3 zone 4 - Seismic GR-63-CORE MIL-STD: 901D - Shipboard shock/vib MIL-STD: 810F
- Mounting Type: Free Standing Cabinet
- Shape: Rectangular
-
Supplier: ELMA Electronic Inc.
Description: Features: Extended shock and vibration with conformal coating Qualified to environmental requirements in MIL STDs 810F, 901D and 167 Shock: MIL STD 810F, 45g's ½ sine 20 ms Operating temperature: -0°C to +55°C Vibration: MIL
- CPU Speed: 1267 MHz
- Communication Networks: Ethernet
- Flash Memory (RAM): 128000 KB
- I/O Bus Specifications: VMEbus
-
Supplier: E-Labs, Inc.
Description: . Lightweight Hammer Shock Testing E-Labs has lightweight hammer shock testing facilities thattest the ability of shipboard installations to withstand shock loadings. Theseshock testing facilities are totally capable of performing Mil-S-901 testrequirements. During lightweight
- Accelerated (HALT / HASS): Yes
- Capabilities: Testing / Simulation, Component / Product Comparisons, Engineering Verification Testing, In-Process In-Line Testing, Performance Testing, Research and Development, Test Fixtures / Equipment
- Combined Environments / Conditions: Yes
- Dynamics Test Services Offered: Acceleration, Aging / Life Testing (HALT), Crash Safety, Drop / Impact Testing, Shock Testing, Transportation Test, Stress Screening / HASS, Vibration (Random / Sine), Specialty / Other
Find Suppliers by Category Top
Featured Products Top
-
MIL-DTL-901H (Formerly MIL-S-901) Shock Testing — Naval Shock Qualification for Shipboard Equipment E-Labs offers MIL-DTL-901H Shock Testing that verifies shipboard equipment can survive and remain functional after severe shock events such as underwater explosions (read more)
Browse Material Testing Services Datasheets for E-Labs, Inc. -
testing along with standard testing types. At E-Labs, we test to Military Specifications including RTCA/DO-160, MIL-STD-167-1, MIL-S-901, MIL-STD-810, and Commercial (read more)
Browse Environmental Exposure (Climatics) Testing Services Datasheets for E-Labs, Inc. -
, Flammability MIL-S-901 Testing: MIL-S-901 details the high-impact shock testing requirements for shipboard machinery, equipment, structures and systems. The purpose of these MIL-S-901 requirements is to verify the (read more)
Browse Product and Component Testing Services Datasheets for E-Labs, Inc. -
, Flammability MIL-S-901 Testing: MIL-S-901 details the high-impact shock testing requirements for shipboard machinery, equipment, structures and systems. The purpose of these MIL-S-901 requirements is to verify the (read more)
Browse Inspection Services Datasheets for E-Labs, Inc. -
's commitment to quality ensures that our products will satisfy the following industry standards: MIL-STD-810, MIL-STD-167, MIL-S-901, MIL-E-5400, STANAG-042, BV43-44 and DEF-STND 0755. Enidine's WRI products are ideally suited for a broad range of applications. If a standard solution is (read more)
Browse Vibration Isolators and Machine Mounts Datasheets for Enidine Inc. -
Standards of Testing, Evaluations and Reporting. Military and Commercial Specifications & Standards include: RTCA / DO-160 MIL-STD-167-1 MIL-STD-810 MIL-S-901 E-Labs personnel have over 70 (read more)
Browse Shock and Vibration (Dynamics) Testing Services Datasheets for E-Labs, Inc. -
and Commercial Specifications & Standards include: RTCA / DO-160 MIL-STD-167-1 MIL-STD-810 MIL-S-901 E-Labs personnel have over 70 years of hands-on lab testing experience within all testing (read more)
Browse Shock and Vibration (Dynamics) Testing Services Datasheets for E-Labs, Inc. -
. Military and Commercial Specifications & Standards include: RTCA / DO-160 MIL-STD-167-1 MIL-STD-810 MIL-S-901 E-Labs personnel have over 70 years of hands-on lab testing experience within (read more)
Browse Shock and Vibration (Dynamics) Testing Services Datasheets for E-Labs, Inc. -
along with standard testing types. At E-Labs, we test to Military Specifications including RTCA/DO-160, MIL-STD-167-1, MIL-S-901, MIL-STD-810, and Commercial (read more)
Browse Shock and Vibration (Dynamics) Testing Services Datasheets for E-Labs, Inc. -
At E-Labs, we test to Military Specifications including RTCA/DO-160, MIL-STD-167-1, MIL-S-901, MIL-STD-810, and Commercial specification and standards as well as custom testing (read more)
Browse Shock and Vibration (Dynamics) Testing Services Datasheets for E-Labs, Inc.