Products & Services
See also: Categories | Featured Products | Technical Articles | More Information-
Supplier: SAE International
Description: This standard defines a system for the qualification of standard products for aviation, space, and defense applications. It defines the principles that shall be adhered to when carrying out product qualification; applied in conjunction with the rules and procedures of the
-
Supplier: SAE International
Description: Technical Standard
-
Description: ISO 15612:2004 gives the information necessary to explain the requirements referenced in ISO 15607 about qualification by adoption of a standard welding procedure, and establishes the conditions, limits and ranges of qualification necessary for the use of a standard
-
-
Supplier: SAE International
Description: This document provides a basic uniform method for ensuring that aerospace standard parts (products) conform with the requirements of technical specifications referring to qualified parts and for a manufacturer of such parts to have a qualified management system at least equivalent to
-
Description: This standard is applicable to fire stops of various materials and construction. Cable-penetration fire stops are intended for use in fire-resistive barriers. Tests conducted in conformance with this standard will record the performance of fire stops during the test exposure. The
-
Description: This standard provides direction for establishing type tests for qualifying the performance of cable penetration fire stops when mounted in rated fire barriers.
-
Supplier: SAE International
Description: This international standard establishes flexure and pressure impulse test procedures for determining and classifying the fatigue strengths of bent aircraft hydraulic tubing. The procedures are intended for use with high- and low-pressure system assemblies for evaluation of new materials or
-
Description: bushings with highest voltages less than or equal to 52 kV (or with resonance frequencies placed outside from the seismic response spectrum), due to their characteristics, seismic qualification is not used as far as construction practice and seismic construction practice comply with the state
-
Description: ISO 15865:2005 establishes common rules for assessing the qualification of space systems and products used in space systems against their functional and technical specifications. It establishes a basis for determining system or product readiness for any stage of the life cycle. This includes
-
Description: Is applicable to alternating current and direct current bushings for rated voltages above 52 kV, mounted on transformers, other apparatus of buildings. It is accepted that for bushings for rated voltages less than or equal to 52 kV, due to their characteristics (resonance frequency greater than 25
-
Description: Aims at defining a qualification profile for laminators, making audits simpler and less frequently required. Less paper work would thus be necessary as customers and suppliers work closer to meeting each others' needs. A diskette is also available with the hardcopy of this PAS. Two zipped
-
Supplier: American Welding Society (AWS)
Description: Welding Procedure and Performance Qualification (Historical - Photocopy)
-
Supplier: American Welding Society (AWS)
Description: services, many local, state, and federal codes and regulations require the qualification and certification of fabrication procedures, inspection personnel, and engineering professionals. An example of one such regulation is the Occupational Safety and Health Administration’s (OSHA) Process
-
Description: Guidance on basic qualification principles and appropriate methods of demonstrating the qualification of equipment used in nuclear facilities is provided in this standard. The principles, methods, and procedures described are intended to be used for qualifying equipment.
-
Description: This kit contains: An Introduction to Nondestructive Testing; A Guide to Personnel Qualification and Certification; ASNT Standard for Qualification and Certification of Nondestructive Testing Personnel (ANSI/ASNT CP-189-2016); Informational materials, recommended references, and
-
Description: The newly approved ANSI Standard, ANSI/ASNT CP-105: Training Outlines for Qualification of Nondestructive Personnel (2006), replaces “Recommended Training Course Outlines” in Recommended Practice No. SNT-TC-1A: Personnel Qualification and Certification in Nondestructive Testing
-
Description: The newly approved ANSI Standard, ANSI/ASNT CP-105: Training Outlines for Qualification of Nondestructive Personnel (2011), replaces “Recommended Training Course Outlines” in Recommended Practice No. SNT-TC-1A: Personnel Qualification and Certification in Nondestructive Testing
-
Description: Revision of IEEE Std 382-1996 Direction for the implementation of the requirements of IEEE Std 323TM-2003 as they apply to the specific features of safety-related actuator qualification are provided. This standard establishes criteria for qualification of safety-related
-
Supplier: AMPP Resources
Description: You are purchasing a downloadable pdf of this Standard. This standard procedure contains requirements for evaluating the qualifications of painting contractors who apply architectural coatings on commercial or institutional structures, and defines a minimum standard for
-
Description: ANSI/ASNT CP-189-2016 is an ANSI standard that establishes the minimum requirements for the qualification and certification of nondestructive testing (NDT) and predictive maintenance (PdM) personnel, including the minimum training, education, and experience requirements, as well as
-
Description: ISO/TS 11774:2011 provides a method for qualification of non-destructive testing (NDT) personnel, procedures, and equipment for specific non-destructive tests conducted in accordance with documented procedures established within a performance-based qualification programme.
-
Description: ISO 15611:2003 gives the necessary information to explain the requirements referenced in ISO 15607 concerning the qualification of welding procedures based on previous welding experience. In addition it gives the range of qualification and the validity. The use of ISO 15611:2003 may be
-
Supplier: ASME
Description: This Standard covers the qualification and certification of Operators of Facilities Combusting Municipal Solid Waste. This publication is issued with an automatic addenda service. All addenda service publications are issued in loose leaf format to facilitate later insertion of
-
Supplier: ASME Standards and Certification
Description: This Standard covers the qualification and certification of Operators of Facilities Combusting Municipal Solid Waste. This publication is issued with an automatic addenda service. All addenda service publications are issued in loose leaf format to facilitate later insertion of
-
Supplier: AMPP Resources
Description: You are purchasing a downloadable pdf of this Standard. This commentary is for information only and is not part of any QP standard. SSPC currently develops six types of consensus standards, one type being the Qualification Procedure, or QP. QPs are published procedures,
-
Supplier: American Welding Society (AWS)
Description: This document is designed as a high-level reference guide to facilitate welder performance qualification testing done in accordance with a variety of codes and standards. This document is not an official AWS standard, but does reflect the opinions of subject matter experts in
-
Supplier: American Welding Society (AWS)
Description: This standard provides the requirements for qualification of brazing procedure specifications, brazers, and brazing operators for manual, mechanized, and automatic brazing. The brazing processes included are torch brazing, furnace brazing, induction brazing, resistance brazing, dip
-
Supplier: AMPP Resources
Description: You are purchasing a downloadable pdf of this Standard. This procedure describes a method for evaluating the qualifications of industrial field painting contractors and defines a minimum standard for qualification. The objective of this procedure is to determine if a painting
-
Description: Aims at defining a qualification profile for manufacturers, making audits simpler and less frequently required. Less paper work would thus be necessary as customers and suppliers work closer to meeting each others' needs. A diskette is also available with the hardcopy of this PAS. Two zipped
-
Supplier: ASME
Description: ASME has been defining piping safety since 1922. ASME B31Q establishes the requirements for developing and implementing an effective Pipeline Personnel Qualification Program. It specifies the requirements for identifying covered tasks that impact the safety or integrity of pipelines, for
-
Supplier: AMPP Resources
Description: You are purchasing a downloadable pdf of this Standard. The procedure describes a method for evaluating the qualifications of field painting contracting firms with less than 6 months industrial painting experience. The procedure defines minimum requirements for this qualification
-
Supplier: ASME Standards and Certification
Description: ASME has been defining piping safety since 1922. ASME B31Q establishes the requirements for developing and implementing an effective Pipeline Personnel Qualification Program. It specifies the requirements for identifying covered tasks that impact the safety or integrity of pipelines, for
-
Supplier: Accuris
Description: Personnel Qualification Standard (PQS)
-
Description: Description / Abstract There is no abstract information for this document.
-
Description: ANSI/ASSE Z359.7-2011 Qualification & Verification Testing of Fall Protection Products
Find Suppliers by Category Top
Featured Products Top
-
Aimed at welding personnel, it specifies the requirements necessary for the qualification of operators and fitters for the mechanized and automatic welding of metal materials. Welding is a fundamental part of the development of the metallurgical industry, which has advanced enormously in (read more)
Browse Standards and Technical Documents Datasheets for AENOR -
Provisions and delivers updated requirements for welding in seismic force resisting systems. What’s new in this edition: Clause 1: Aligns engineer responsibilities with AISC 341 and clarifies PQR requirements for WPS qualification. Clause 4 (read more)
Browse Standards and Technical Documents Datasheets for American Welding Society (AWS) -
A new ASTM International standard will help those who both provide and use induction-heat treatment to strengthen metals. While guides and specifications already exist to qualify standard heat treating furnaces, this new standard will be the first generally accepted guide for qualification of (read more)
Browse Standards and Technical Documents Datasheets for ASTM International -
made enormous progress in recent years. This can be seen in the industry's strong demand for technical welding standards which are essential tools for ensuring the quality of work anywhere in the world. Below are some of the bestsellers: -UNE-EN ISO (read more)
Browse Standards and Technical Documents Datasheets for AENOR -
The American Welding Society (AWS), in collaboration with the American Association of State Highway and Transportation Officials (AASHTO), has released American National Standard (ANS) AASHTO/AWS D1.5M/D1.5:2025, Bridge Welding Code, the latest edition for welding fabrication (read more)
Browse Standards and Technical Documents Datasheets for American Welding Society (AWS) -
, qualification and inspection of steel structures worldwide. The 2025 edition includes key updates that reflect advancements in materials, techniques, and industry best practices. “D1.1/D1.1M has been the foundation of structural welding for close to a hundred years, adapting to industry (read more)
Browse Standards and Technical Documents Datasheets for American Welding Society (AWS) -
Labels used in aerospace environments aren’t just for identification—they’re mission?critical. From MIL?STD?130 compliance to extreme temperature performance, your labeling materials must meet the highest standards for safety (read more)
Browse Label Materials Datasheets for Polyonics -
Aker's TX32A TCXO meets AEC-Q200 qualification standard for automotive applications Aker's TCXO measures 3.2mm x 2.5mm, frequency 10-52MHz, stability +/-2ppm, temperature -40 to+85C, voltages 1 (read more)
Browse Oscillators Datasheets for Aker Technology USA Corporation -
The latest additions include 32 planar Schottky diodes and eight hyperfast recovery rectifiers housed in the CFP15B package. They are available as standard and Q-types that meet AEC-Q101 automotive qualification standards. By bringing multiple versions of these devices to the market (read more)
Browse Diodes Datasheets for Nexperia B.V. -
At Parker, we take pride in the quality and performance of our ZoomLock Push product family. As the industry standard for easy-to-connect HVACR fittings, ZoomLock has received extensive qualification and performance testing, ensuring that it meets all industry requirements without compromise (read more)
Browse Pipe Fittings Datasheets for Parker Sporlan Division
Conduct Research Top
-
Designing VME Power Systems from Standard Modules
For military, avionics and other high reliability applications it is best to choose DC-DC converters from a manufacturer who focuses on these applications. Look for high quality standards such as J-STD-001 and IPC-A- 610 class 3, or for the most critical applications, MIL-PRF-38534 class H or K
-
VICTREX (R) PEEK Meets NORSOK M710 Compliance and Continues to Aggressively Test its Polymers in Support of Industry-Leading Test Standards
) and also after. rapid decompression events. Standards such as API 6 "Specification for. Wellhead and Christmas Tree Equipment". and the NORSOK M710 "Qualification. of Non-Metallic Sealing Materials and. Manufacturers" propose specific. environments which may be single. or multi-phase and which consist
-
Dissolution Testing in the 21st Century
the dissolution procedure should align with cGMPs and with principles of sound science. These cGMPs stress instrumental qualification (IQ), operational qualification (OQ) and performance qualification (PQ). For the dissolution procedure, OQ is performed using mechanical calibration and PQ is conducted
-
Determine System EMI Characteristics Early in System Design Phase
Often in the commercial, industrial, medical and military industries, system engineers wait until system qualification before addressing critical functions for EMC and EMI compliance to relevant standards. The most common mistake is the belief that a power supply with EMI compliance certifications
-
Moisture Analysis: History, Sampling and Case Study
Mass spectrometry analysis of electronic components is more than an Internal Water Vapor test as the titles of the Military Standards 883 and 750 might imply. The test provides a quantitative measurement of all gases inside a device and should be used as such. To ignore the other gases is like
-
Fractional Pixel Method for Improved Pixel-Level Measurement and Correction (Demura) of High-Resolution Displays
and measurement method improves the accuracy of pixel-level values measured by standard-resolution systems, ensuring effective qualification and demura of high-resolution OLED, miniLED, and microLED displays.
-
Thin Film Solar Success Story
We needed to transfer the partial design from the client's previous supplier to ATS. Our client needed us to complete the design and build three initial qualification units within 10 weeks. We successfully completed a review of the current status of the design, determined what the required changes
-
Laboratory Centrifuge Success Story
We needed to transfer the partial design from the client's previous supplier to ATS. Our client needed us to complete the design and build three initial qualification units within 10 weeks. We successfully completed a review of the current status of the design, determined what the required changes
-
A Closer Look at Form-Fill-Seal Technology
By Rakesh P. Patel, Gayatri C. Patel, Nikunjana A. Patel, Dr. Madhabhai M. Patel and Rishad Jivani, S.K. Patel College of Pharmaceutical Education and Research, Ganpat University, Gujarat, India The Installation Qualification process for any FFS system should confirm and certify that the room
-
Disposable Processing Equipment Update
and develop standards for disposable equipment, the Bio-Process Systems Alliance, a division of the Society for the Plastics Industry, was established last year. The organization, which came together at last year s Interphex conference, has 40 members, all manufacturers of single-use bioprocessing
-
EETimes.com | Electronics Industry News for EEs & Engineering Managers
(June 7) that the Federal Aviation Administration's plan to modernize the nation's air traffic control network fails to keep pace with projected traffic growth. Turnstone inks strategic pact with Alcatel Turnstone Systems Inc., a digital subscriber line loop-qualification equipment company, announced
-
Speed-Swimming in a Data Swamp
, and for real-time process optimization. In practice, a client might purchase Emerson's Delta V control system, then integrate parts or all of AMS with it. (AMS can be used with other vendors' systems as well, according to the company.) During validation and operational-qualification testing, AMS can be set
More Information Top
-
International Handbook of Education for the Changing World of Work
The complete system: thirty-six national TVET teacher- qualification standards by combining nine core fields of activities and four TVET teacher-qualification levels . . . . . .
-
Federal Register > Monday, October 30, 2006 > [71 FR 63392] Flight Simulation Training Device Initial and Continuing Qualification and Use
FAA Response: Codifying simulation qualification standards provides for a "level playing field" among FSTD manufacturers and sponsors in the United States and a harmonization of interests internationally.
-
Federal Register > Wednesday, September 25, 2002 > [67 FR 60284] Flight Simulation Device Initial and Continuing Qualification and Use
Proposed paragraph (f) describes the requirements when a sponsor elects to adopt tests and tolerances described in qualifications standards developed after an FSD was initially qualified.
-
http://umkn-dsp01.unisa.ac.za/bitstream/handle/10500/1462/thesis.pdf?sequence=1
registered on the NQF, but may be nested under a generic qualification standard for the .
Indicates content that may require registration and/or purchase.