Products & Services
See also: Categories | Featured Products | Technical Articles | More Information-
Supplier: Micro Sensor Co., Ltd.
Description: pressure sensor Used For: Differential pressure sensor MDM291 is a fully welded type. It has unified construction, high static pressure, good stability, and reliability. The pressure sensor ranges from 0.35 bar to 20 bar with wide temperature
- Measurement Type: Differential
- Device Category: Sensor
-
Supplier: Acme Chip Technology Co., Limited
Description: WATER PRESSURE SENSOR
- Working Pressure Range: 174.05 psi
- Operating Temperature: -4 to 221 F
- Measurement Type: Gauge
- Device Category: Sensor
-
Supplier: Richardson RFPD
Description: MS5837-30BA Pressure Sensor Ultra-small, gel-filled, pressure sensor withstainless steel cap The MS5837-30BA is a high-resolution pressure and temperature sensorfrom TE Connectivity (TE) with I2C bus interface. This sensor is optimizedfor water depth
- Measurement Type: Absolute
- Device Category: Sensor
-
-
Supplier: STW Technic
Description: For water level measurements, ss diaphragm, pressure equalization
- Working Pressure Range: 0 to 145.0377 psi
- Operating Temperature: 14 to 185 F
- Signal Output: Analog Current, Analog Voltage
- Measurement Type: Gauge
-
Supplier: Infineon Technologies AG
Description: XENSIV™ DPS368 - ultra small waterproof pressure sensor, environmentally protected against water (IPx8), dust & humidity XENSIVTM DPS368 is a miniaturized digital barometric air pressure sensor with ultra-high precision (±2 cm) and a low current consumption,
- Measurement Type: Gauge
- Device Category: Sensor
-
Supplier: PCB Piezotronics, Inc.
Description: Rocket motor ICP® pressure sensor, 250 psi, 20 mV/psi, Helium bleed, water-cooled
- Working Pressure Range: 5,000 psi
- Operating Temperature: -100 to 250 F
- Measurement Type: Gauge
- Device Category: Sensor
-
Supplier: DigiKey
Description: WATER PRESSURE SENSOR
- Working Pressure Range: 174.05 psi
- Accuracy: 1.5 ±% FS
- Operating Temperature: -4 to 221 F
- Signal Output: Analog Voltage
-
Supplier: DeZURIK, Inc.
Description: Red Valve Series 40 Pressure Sensors are the industry standard for protecting instrumentation. They assure accurate, dependable pressure measurement of slurry and corrosive fluids. The line pressure is sensed 360° through the flexible rubber sleeve. The captive fluid is
- Measurement Type: Gauge
- Device Category: Sensor
-
Supplier: DeZURIK, Inc.
Description: process. Standard diaphragm seals are vulnerable to plugging by debris or deposits and only give a pressure reading from one small area. With the Series 48 Pressure Sensor these problems are eliminated. The principle of operation is simple - line pressure is sensed
- Measurement Type: Gauge
- Device Category: Sensor
-
Supplier: Keller America, Inc.
Description: Series 4: The medium acts on the rear side of the silicon chip. The pressure medium may be wet, including applications in gas, water and non-aggressive fluids with benign reference atmosphere. Ideal for under pressure measurements.
- Working Pressure Range: -1.450377 to 145.0377 psi
- Accuracy: 0.25 to 0.5 ±% FS
- Operating Temperature: 14 to 176 F
- Measurement Type: Absolute, Differential, Gauge, Negative Pressure Output, Sealed
-
Supplier: PCB Piezotronics, Inc.
Description: Rocket motor ICP® pressure sensor 10k psi 0.5mV/psi Helium bleed water-cooled (replaceable tubes)
- Working Pressure Range: 15,000 psi
- Operating Temperature: -100 to 250 F
- Measurement Type: Gauge
- Device Category: Sensor
-
Description: The differential pressure transducer monitors the differential pressure (pressure drop) between a point immediately upstream and a point immediately downstream of the full flow fuel monitor, water coalescer, or other device typically applied in aviation fueling systems.
- Working Pressure Range: 0 to 150 psi
- Accuracy: 0.2 ±% FS
- Operating Temperature: -40 to 176 F
- Measurement Type: Differential, Negative Pressure Output
-
Supplier: SensorsONE, Ltd.
Description: The IMCL low cost water proof liquid level sensor is designed for end user or OEM applications which require a low cost submersible sensor with a durable design and a medium grade accuracy performance. Threee different choices of housing, seals and cable are possible with the
- Measurement Type: Absolute
- Device Category: Sensor
-
Supplier: Micro Sensor Co., Ltd.
Description: MPM281VC is a piezoresistive pressure sensor silicon oil-filled. Its stainless steel 316L construction. The pressure sensor has a range of 0bar~0.35 bar…1000bar and gauge sealed gauge and absolute pressure type optional. MPM281VC pressure sensor has
- Measurement Type: Absolute, Gauge
- Sensor Technology: Piezoelectric
- Device Category: Sensor
-
Supplier: DeZURIK, Inc.
Description: Red Valve Series 40W Pressure Sensors are the industry standards for protecting instrumentation and assuring accurate, dependable pressure measurement of slurry and corrosive fluids. The line pressure is sensed 360° through the flexible rubber sleeve. The captive fluid is
- Measurement Type: Gauge
- Device Category: Sensor
-
Supplier: PCB Piezotronics, Inc.
Description: Rocket motor pressure probe, 3000 psi, 1 pC/psi, Helium bleed, water-cooled, M14 x 1.25 thd (replaceable tubes)
- Working Pressure Range: 5,000 psi
- Operating Temperature: -450 to 500 F
- Measurement Type: Gauge
- Device Category: Sensor
-
Supplier: DeZURIK, Inc.
Description: The Series 48W Pressure Sensor isolates and protects instrumentation. The full-port design eliminates clogging, ensuring accurate pressure measurement under the most difficult conditions. The elastomer sleeve senses pressure 360° around the inner circumference of the
- Measurement Type: Gauge
- Device Category: Sensor
-
Supplier: E+E Elektronik
Description: scale (FS) 1,000 Pa (4 inch Water Column) and 10,000 Pa (40 inch WC) and offers an outstanding accuracy of ± 0.5 % FS. For the versions with analogue outputs, several measuring ranges are selectable with DIP-switches. The piezo-resistive pressure sensing element ensures highly accurate
- Working Pressure Range: 1,450,368.39357197 psi
- Accuracy: 0.5 ±% FS
- Operating Temperature: -4 to 140 F
- Signal Output: Analog Current, Analog Voltage, RS232 / RS485
-
Supplier: Merit Sensor Systems
Description: Media Air, gases, and liquids (to be determined on an application-by-application basis with Merit Sensor’s engineering team) Shipping Tape and reel Flexibility Range of pressure, size of pressure port, and configuration Application Examples Industrial Process control,
- Working Pressure Range: 0 to 500 psi
- Operating Temperature: -40 to 185 F
- Measurement Type: Absolute, Gauge
- Media: Gas, Liquid
-
Supplier: Filter Minder®
Description: (3.4 to 2068 kPa). Some applications include: fuel pressure, oil pressure, air pressure, water pressure, gaseous pressure and others. See specifications for standard mounting and connector availability. Description New heavy duty absolute pressure
- Accuracy: 2.5 ±% FS
- Operating Temperature: -40 to 284 F
- Measurement Type: Absolute, Vacuum
- Signal Output: Analog Voltage
-
Supplier: VAST STOCK CO., LIMITED
Description: Pressure Sensor Development Tools Adafruit LPS35HW Water Resistant Pressure Sensor
-
Supplier: Micro Sensor Co., Ltd.
Description: MPM4891 water pressure transmitter is designed with the built-in LED digital display which is easier for the users to find out the output value on site. Hence, measuring water depth or water level with pressure sensors can be convenient and easy.
- Accuracy: 0.5 ±% FS
- Pressure Measurement: Absolute, Gauge
-
Supplier: FUTEK Advanced Sensor Technology, Inc.
Description: PMP450 , 50 in. of water , Pressure Sensor (Industrial) , 4-20 mA Output , Stainless Steel , 1/4-18-NPT Thread , Relative , Din Connector
- Working Pressure Range: 1.80635 psi
- Accuracy: 0.4 ±% FS
- Operating Temperature: -4 to 176 F
- Signal Output: Analog Current
-
Supplier: Angst+Pfister Sensors and Power
Description: differential pressure transmitter types or via a single port for absolute or barometric types. The electrical connection is realized with an M5 circular sensor connector. PAMS47xx’s package is dust- and water-tight conforming to IP67.
- Working Pressure Range: 0.07251885 to 29.00754 psi
- Accuracy: 0.5 ±% FS
- Operating Temperature: -13 to 185 F
- Pressure Measurement: Absolute, Gauge, Vacuum
-
Supplier: Merit Sensor Systems
Description: Benefits Excellent performance in both constant current and constant voltage applications Simple pressure attachment and electrical connection Designed for a soldered connection to wires, ribbon cable, or flex strip Typical Applications Medical inflation Water Pressure and flow
- Impedance: 4 to 6 kohms
- Operating Temperature: -40 to 85 C
- Pressure Range: 0 to 500 psi
- Applications: Automotive, Industrial
-
Description: GRAVITY: ANALOG WATER PRESSURE S
- Input (Supply) Voltage: 5 volts
- Operating Temperature: -20 to 85 C
- Features: Other
-
Supplier: Accuris
Description: Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 5: Pressure sensor method
-
Supplier: Red Valve Company, Inc.
Description: Red Valve's Series 45 Pressure Sensor with digital read out is especially designed for tank level control and indication. The Series 45 flange is available in the size of any existing blind flange outlet (2" through 12"), making it ideal for direct mounting to existing flange outlets
- Operating Temperature: -20 to 400 F
- Pressure Connection Size: 2 to 12 inch
- Features: Digital, Liquid Filled, Other
- Pressure Measurement: Gauge
-
Supplier: TE Connectivity
Description: Output/Span : 4 - 20 mA Pressure Range : 15 psi Proof Pressure Range : 2X FS Water-Level Sensor Accuracy : ± .25% FS Other Sensor Options : Lightning Protection Product Type Features Water-Level Sensor Style : Gauge Water-Level Sensor
- Maximum Operating Pressure: 15 psi
- Features: Analog Current
- Level Measurement Type: Continuous Level
- Media Type: Liquid
-
Supplier: Comus International
Description: Simple and quick mounting Detection of smallest parts Fork widths 30 – 120mm High switching frequency up to 4kHz Water proof, IP 67, robust Versions with red light and laser light as well Customized versions available
- Media Type: Liquid
- Device Classification: Sensor-Only
- Meter Technology Type: Ultrasonic / Sonic
-
Supplier: Merit Sensor Systems
Description: The HTS Series is a surface-mountable pressure sensor that offers you a choice between an analog or digital output. But the HTS Series is not just your typical surface-mount device. Due to its backside-pressure-measurement design, the sensor’s electronics are isolated,
- Working Pressure Range: 1 to 100 psi
- Operating Temperature: -40 to 257 F
- Measurement Type: Absolute, Gauge
- Media: Gas, Liquid
Find Suppliers by Category Top
Featured Products Top
-
use and protection of water. With our sensors and components, we can support you developing a solution to optimize the monitoring and management of water resources. Use of radar modules or pressure transducers One example of measurement (read more)
Browse Pressure Sensors Datasheets for Endress + Hauser – Sensors & Components -
, snap-acting electrical switches and field adjustable set points with a visual scale for easy set point selection. Pressure ranges as low as 2”Water Column (W.C.)* up to 100 PSI are available. Series 3000 switches assure control stability through wide and variable temperature and humidity (read more)
Browse Pressure Switches Datasheets for Tecmark Corporation -
Sensata Paves the Way for Sustainable Water Use with New Smart Pressure Sensor for In-Meter Monitoring Sensata’s new Digital Water Pressure Sensor allows for remote pressure monitoring by utilities to identify distribution issues, leaks, and other (read more)
Browse Pressure Sensors Datasheets for Sensata Technologies -
Central Heating Boiler Applications: Boiler Sensors 116CP/117CP Central heating boilers are a very common way of heating the house or office. In a case where a combi boiler is used, the domestic hot water is created in the same boiler. For example (read more)
Browse Pressure Sensors Datasheets for Sensata Technologies -
an ultrasonic sensor. A second important parameter is the level measurement, which is measured using pressure sensors such as the UTC30. With the UTC30 Endress+Hauser Sensors&Components offers a (read more)
Browse Pressure Sensors Datasheets for Endress + Hauser – Sensors & Components -
A pressure sensor is a device employed to measure the pressure of gases and liquids. These sensors are used in a wide range of applications, from altitude sensing to pressure switching in water networks. In some cases, pressure sensors may need to be used in harsh conditions, high temperature (read more)
Browse Pressure Sensors Datasheets for Angst+Pfister Sensors and Power -
element imported , this sensor offers overload protection with an accuracy of up to 0.5% F.S. Its corrosion-resistant and water-compatible properties ensure long-term stability and extended service life. With intelligent digital processing and temperature compensation output, the sensor adapts (read more)
Browse Pressure Sensors Datasheets for Holykell Technology Company Limited -
solution: For these applications, we offer pressure sensors or transducer modules based on the ceramic-capacitive technology. In ballast tanks the experience shows that fixed sensors are used, mounted on the tank wall as well as level probes that are permanently installed in the tank (read more)
Browse Pressure Sensors Datasheets for Endress + Hauser – Sensors & Components -
Thin film hydraulic pressure sensor sputtered thin film pressure transducer unit offers an unbeatable price/performance ratio in a small package size. It features all (read more)
Browse Pressure Sensors Datasheets for Holykell Technology Company Limited -
The 52 Series is a miniature, robust pressure sensor with calibrated and temperature-compensated SPI, I2C, or analog output. A variety of output configurations (read more)
Browse Pressure Sensors Datasheets for Angst+Pfister Sensors and Power
Conduct Research Top
-
Pressure Sensors & Media Capability
Harsh media poses one of the most significant application problems for most pressure sensors. Pressure sensors measuring flow (liquids or gases) and/or liquid depth and that interface to a variety of chemicals can present the most serious challenges but, in some instances, even exposure to water
-
How Piezoresistive Pressure Sensor Works?
It is mainly engaged in pressure sensors, pressure transmitters, liquid level transmitters, electromagnetic flowmeters, and IoT monitoring terminal products, providing customized product solutions for more than 16,000 customers in more than 100 countries and regions around the world
-
Solve High-Pressure Boiler Water Challenges
Every plant with boilers or steam turbines faces the issue of corrosion, but if your application requires high-pressure boilers using high-purity water, the challenge doubles. Most general-purpose pH sensors, which are the first line of certainty that your water treatment is balanced and on track
-
High Performance Ultrasonic Sensor for Intelligent Water Meter
water meter, Audiowell has launched a new generation of water meter flow sensor -- US0078 from the perception layer. Compared with similar competitive products on the market, this product has more stable electrical performance and stronger pressure resistance. At the same time, it has
-
Optimal Pressure for Clean Teeth
While some electric toothbrushes use pulsating water jets or oral irrigators with water pressures between 10 to 100 psi, some ultrasonic technology toothbrushes now integrate a pressure sensor to avoid brushing too hard. With their built-in pressure sensors, Philips ProtectiveClean or DiamondClean
-
Panel Mountable Pressure Transducers
generation. These sensors measure a wide range of benign and corrosive media, with temperatures ranging from -70 to 300 degrees Fahrenheit. System integrators and panel builders traditionally relied on sensors mounted to bulkhead fittings as a form of pressure connection for pressure measurements
-
Application: SME Fluid Level, Pressure, and Flow Sensors
The desire for more information and convenience, along with worldwide water and energy conservation initiatives, has led to a flurry of new fluid level magnetic and conductive sensor designs. Appliances are the number one adopter of the technology, with HVAC (condensate level sensing
-
MSilica Nanoparticles Treated by Cold Atmospheric-Pressure Plasmas Improve the Dielectric Performance of Organic-Inorganic Nanocomposites
Microfluidic mixing using contactless dielectrophoresis. The first experimental evidence of mixing enhancement in a microfluidic system using. contactless dielectrophoresis (cDEP) is presented in this work. Pressure-driven flow of. deionized water containing 0.5 mm beads was mixed in various
More Information Top
-
Analysis of physical testing of rainfall-induced soil slope failures
Miniature pore- water pressure sensors and a data acqui- sition system (Fig. 2) were used in the experiments.
-
Geosynthetics in Civil and Environmental Engineering
ABSTRACT: Study on hysteresis phenomenon of piezometer tubes through comparing reading of pore water pressure sensors and piezometer tubes has been carried out.
-
Measurement systems for determining formwork pressure of highly-flowable concrete
The pore-water pressure resulting from the fluid phase of concrete can be evaluated using pore- water pressure sen- sors similar to the ones employed in soil mechan- ics.
-
Entertaining the Whole World
sound effects and music) utilizing a water pressure sensor equipped in an external water heater.
-
Landslide Science for a Safer Geoenvironment
Deformation-monitoring equipment, as well as temperature, moisture, and pore water pressure sensors were embedded in the holes.
-
A novel method for measuring the timing of bed erosion during debris flows and floods
During previous measurements of much smaller floods (without erosion), the pore water pressure sensors appeared to function prop- erly and recorded changes in the level of the groundwater as expected.
-
CR4 - Thread: Water Pressure Sensor with MCU and RF Transceiver
Water Pressure Sensor with MCU and RF Transceiver .
-
http://repository.kulib.kyoto-u.ac.jp/dspace/bitstream/2433/126786/2/D_GARCIA_ARISTIZABAL_Edwin_Fabian.pdf
During the test, the positive pore water pressure response was monitored by installing pore water pressure sensors within the river embankment.
Indicates content that may require registration and/or purchase.