-
Supplier: Fritsch GmbH - Milling and Sizing
Description: Test sieve 400 mm dia., 65 mm height, frame and mesh wire made of stainless steel with compliance certificate
- Standard Diameters: 400 mm
- Standard Heights: Full Height, Half Height, Other
- Top Covers and/or Bottom Pans: Yes
-
Supplier: Fritsch GmbH - Milling and Sizing
Description: Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel This sieve can also be delivered in further sizes, for example: 200 mm dia., 25 mm height, 8" dia. 2" height, 100 mm dia., 40 mm height.
- Standard Diameters: 8", 200 mm
- Standard Heights: Full Height, Half Height, Other
- Top Covers and/or Bottom Pans: Yes
-
Supplier: Intertek
Description: ASTM D635, ISO 3795 Thermal Analysis and Testing Fire testing, flammability and fire resistance: Furniture Testing Furniture and mattress testing, including ASTM E1537, BIFMA, NFPA 266, NFPA 267, UFAC, and California Technical
- Capabilities: Testing / Simulation, Certification, Component / Product Comparison, Consulting / Training, Research and Development, Test Development, Test Fixtures / Equipment, Test Panel / Sample Prep
- Industry Applications: Appliances, Building & Construction, Consumer Products, Electrical Distribution, Hazardous Location Equipment, Materials, Paper / Plastic Packaging, Specialty / Other
- Materials: Components / Parts, Products, Samples
- Services Offered: Explosivity, Explosive Atmosphere / Intrinsic Safety, Extinguishing Test, Fire Characteristics / Flammability Testing, Fire Penetration / Stopping, Smoke Density / Generation
-
-
Supplier: Cambridge Polymer Group, Inc.
Description: analysis (DMA), tensile testing, compression testing, creep testing For a partial list of ASTM standards performed by Cambridge Polymer Group, please see ASTM Standards. Cambridge Polymer Group provides testing services of polymeric materials with
- Capabilities: Assays / Quantitative, Cleanliness Monitoring / Testing, Deformulation / Reverse Engineering, Failure Analysis, Quality / Purity (Contamination - Alloys, Polymers, etc.), Report Preparation, Standards Testing / Certification, Umpire Testing, Other
- Industry Applications: Aerospace / Aviation, Automotive, Food / Beverage, Health Care / Medical, Legal / Forensics, Marine, Pharmaceutical / Biotech, Packaging
- Materials: Adhesives / Sealants, Coatings, Cosmetics (Creams, Sunblocks, etc.), Plastic / Rubber, Polymers / Organics, Powders, Textiles, Wafers / Surfaces, Other
- Regional Preference: North America, United States Only, Northeast US Only
-
Supplier: Cambridge Polymer Group, Inc.
Description: analysis (DMA), tensile testing, compression testing, creep testing For a partial list of ASTM standards performed by Cambridge Polymer Group, please see ASTM Standards. Cambridge Polymer Group provides testing services of polymeric materials with
- Capabilities: Certification / Qualification, Comparisons, Consulting / Training, Evaluation and Analysis, Failure Analysis / Troubleshooting, First Article / Contract QA, In-Process In-Line Testing, Research and Development, Testing, Test Fixtures / Equipment, Witness / Review, Validation
- Forms Tested: Components / Parts, Samples / Materials, Products (Machines / Devices)
- Industry Applications: Aerospace / Avionics, Automotive, Coatings / Paint, Drugs / Pharmaceuticals, Food & Beverage, Consumer Products, Industrial, Instruments / Sensors, Legal / Forensics, Medical Devices / Equipment, Paper / Plastic Packaging, Rubber Products, Specialty / Other
- Services Offered: Abrasion / Wear Testing, Aging / Life Testing, Chemical Compatibility Testing, Dimensional Gaging, Mechanical / Structural (Static Load / Stress), Optical Testing, Performance Testing, Physical Properties Testing, Specialty / Other
-
Supplier: Cambridge Polymer Group, Inc.
Description: (DMA), tensile testing, compression testing, creep testing For a partial list of ASTM standards performed by Cambridge Polymer Group, please see ASTM Standards on our website: http://www.campoly.c om/astm.html Cambridge Polymer Group provides testing
- Industry Applications: Aerospace / Aviation, Food / Beverage, Automotive, Chemical / Material Processing, Health Care / Medical, Legal / Forensics, Marine, Military, Pharmaceutical / Biotech, Packaging, Semiconductors / Electronics, Structural / Construction, Specialty / Other
- Materials: Adhesives / Sealants, Chemicals, Coatings, Composites, Cosmetics (Creams, Sunblocks, etc.), Inorganics, Nanomaterials, Paper, Petroleum Fluids (Oil, Fuel, Distillates), Plastic / Rubber, Polymers / Organics, Powders, Textiles, Thin Films / Plating, Wafers / Surfaces, Water
- Regional Preference: North America, United States Only, Northeast US Only
- Services Offered: Assays / Quantitative, Cleanliness Monitoring / Testing, Deformulation / Reverse Engineering, Environmental Exposure Testing, Materials Testing Services, Quality / Purity (Contamination), Report Preparation, Standards Testing / Certification, Umpire Testing, Other
-
Supplier: Haida International Equipment Co., Ltd.
Description: , compress, bend, shear, tearing and peel test. With the personal computer and interface plate, it could collect, save, process and print test result. Further it can calculate multiple parameters, i.e. maximum force, yield strength, average peel force, maximum deformation,
- Application Software: Yes
- Display / Interface: Computer Interface
- Force / Load Capacity: 1102 to 4410 lbs
- Mechanical Test: Tensile, Universal
-
Supplier: Adhesives.org
Description: This test method covers the determination of the comparative tensile properties of the adhesive bonds of metal to metal when tested on standard shape specimens and under defined conditions of pretreatment, temperature, and testing machine speed.
-
Supplier: Intertek
Description: D4329, ASTM D4587, ISO 4892, VDA 75202, PV 3929, PV 3930, E J1885, SAE J1960 Road Vehicles Environmental conditions and testing for electrical and electronic equipment based on ISO 16750 series
- Accelerated (HALT / HASS): Yes
- Capabilities: Component / Product Testing, Component / Product Comparisons, Certification / Qualification, Consulting / Training, Engineering Verification Testing, Evaluation and Analysis, Performance Testing, Reliability / Robustness, Test Development
- Combined Environments / Conditions: Yes
- Forms Tested: Components / Parts, Products (Equipment / Devices), Samples / Materials
-
Supplier: Adhesives.org
Description: This test method covers a laboratory procedure for the determination of the extension-recovery and adhesion of latex sealants
-
Supplier: Cambridge Polymer Group, Inc.
Description: studies, failure analysis, sterilization procedures, oxygen content, Vitamin E characterization Mechanical Analysis: Dynamic mechanical analysis (DMA), tensile testing, compression testing, creep testing For a partial list of ASTM standards performed by Cambridge
- Industry: Automotive, Chemical / Material Processing, Food / Beverage, Health Care / Medical, Legal / Forensics, Pharmaceutical / Biotech, Semiconductors / Electronics, Specialty / Other
- Laboratory Services Offered: Assays / Quantitative, Chemical Testing Services, Cleanliness Monitoring / Testing, Deformulation / Reverse Engineering, Failure Analysis, Materials Testing Services, Report Preparation, Standards Testing / Certification, Other
- Materials: Adhesives / Sealants, Chemicals, Coatings, Composites, Cosmetics (Creams, Sunblocks, etc.), Fuel Cell / Battery Materials, Nanomaterials, Paper, Petroleum Fluids (Oil, Fuel, Distillates), Plastic / Rubber, Polymers / Organics, Powders, Solid Waste, Textiles, Volatiles (VOCs) / Solvents, Wafers /
- Regional Preference: North America, United States Only, Northeast US Only
-
Supplier: Haida International Equipment Co., Ltd.
Description: Specifications Package Clamp Test Machine 1.Package clamp testing machine 2.Up to ASTM D6055 3.PLC control Safety protection Overload protection, overvoltage protection & limited position protection device Clamp Compression
- Force / Load Capacity: 110 to 6615 lbs
- Mechanical Test: Compressive
- Test Speed: 0.1969 to 1.97 in/min
-
Supplier: Haida International Equipment Co., Ltd.
Description: Product introduction: Ozone environmental aging test machine simulation natural ozone environmental conditions to strengthen the atmosphere. to study the effect of ozone on the law of the rubber. rapid identification and evaluation method of anti ozone aging properties of rubber
- Configuration: Floor Mount
- Temperature Control: Heating
- Test Parameters: Temperature
-
Supplier: Haida International Equipment Co., Ltd.
Description: humidification systems to meet all the test conditions. Corresponding standard JIS K 6259 . ASTM1149 . ASTM1171. ISO1431. DIN53509 . GB/T13642. GB/T 7762-2003, GB 2951 Applicable industries It is widely used to control products quality in measuring quality
- Configuration: Floor Mount
- Features: Programmable
- Temperature Control: Heating
- Test Parameters: Temperature
-
Supplier: Restek
Description: Components in this mix (0.5µL/mL or 0.05% volume/volume each) are at 10X the concentration of the final test solution specified in ASTM 1618 and ASTM 1387.
- Form: Liquids
-
Supplier: Adhesives.org
Description: This test method covers a laboratory procedure for quantitatively measuring the tensile strength, stiffness, and adhesion properties of insulating glass edge seals that are used in structural sealant glazing applications. Edge seals for these applications use a structural sealant to bond both
-
Supplier: Cole-Parmer
Description: These stainless steel (SS) testing sieves are serialized and come with a test sieve certificate of compliance. Equivalent to ASTM E11-09 compliance sieve.
- Other Nominal Sieve Opening (Mesh Size): 0.0049 inch
- Standard Diameters: 8"
- US Standard as per ASTM E-11: # 120 (125 µm)
-
Supplier: Cole-Parmer
Description: These stainless steel (SS) testing sieves are serialized and come with a test sieve certificate of compliance. Equivalent to ASTM E11-09 compliance sieve.
- Other Nominal Sieve Opening (Mesh Size): 0.0197 inch
- Standard Diameters: 8"
- US Standard as per ASTM E-11: # 35 (500 µm)
-
Supplier: Cole-Parmer
Description: These stainless steel (SS) testing sieves are serialized and come with a test sieve certificate of compliance. Equivalent to ASTM E11-09 compliance sieve.
- Other Nominal Sieve Opening (Mesh Size): 0.0787 inch
- Standard Diameters: 8"
- US Standard as per ASTM E-11: # 10 (2.0 mm)
-
Supplier: Cole-Parmer
Description: These stainless steel (SS) testing sieves are serialized and come with a test sieve certificate of compliance. Equivalent to ASTM E11-09 compliance sieve.
- Other Nominal Sieve Opening (Mesh Size): 0.0140 inch
- Standard Diameters: 8"
- US Standard as per ASTM E-11: # 45 (355 µm)
-
Supplier: Tinius Olsen, Inc.
Description: Tinius Olsen offers a wide variety of tools and accessories for testing bolts, nuts and threaded fasteners in accordance with ASTM methods A194, A370, F606 and other applicable ASTM, SAE, IFI and Military specifications. The unique design of these tools eliminates the need for
- Standard: ASTM
- Test Applications: Tensile
- Type: Test Grip / Clamp
-
Supplier: Accuris
Description: TENTATIVE METHOD OF TEST FOR TENSILE MODULUS OF ELASTICITY OF THINPLASTICE SHEETING
-
Supplier: E-Labs, Inc.
Description: E-Labs, Inc. is a Full Service Testing Laboratory, offering customers access to state of the art facilities and personnel. E-Labs personnel have over 70 years of hands on testing experience within all testing disciplines for the Aerospace, Automotive, Military,
- Capabilities: Certification / Qualification, Comparisons, Engineering Verification Testing, Evaluation and Analysis, Failure Analysis / Troubleshooting, Proficiency Testing, Reliability / Robustness, Testing, Test Fixtures / Equipment, Test Panel / Sample Prep, Validation,
- Forms Tested: Components / Parts, Samples / Materials, Products (Machines / Devices), Capital Equipment
- Industry Applications: Aerospace / Avionics, Automotive, Building & Construction, Coatings / Paint, Electrical Power / Distribution, Electronics, Food & Beverage, Hydraulics / Pneumatics, Industrial, Instruments / Sensors, Marine, Motor Controllers / Control Systems, Piping / Pressure Vessels, Rubber Products,
- Services Offered: Abrasion / Wear Testing, Aging / Life Testing, Chemical Compatibility Testing, Climatics / Environmental Exposure, Condition Monitoring, Dimensional Gaging, Dynamics / Vibration & Shock, Electrical Characteristics Testing, Fire Characteristics / Flammability, Flow /
-
Description: ISO 51538:2009 covers the procedure for preparation, handling, testing, and use of the ethanol-chlorobenzen e (ECB) dosimetry system to determine absorbed dose (in terms of absorbed dose to water) in materials irradiated by photons (gamma radiation or X-radiation/bremsstr ahlung) or
-
Supplier: E-Labs, Inc.
Description: E-Labs, Inc. is a Full Service Testing Laboratory, offering customers access to state of the art facilities and personnel. E-Labs personnel have over 40 years of hands on testing experience within all testing disciplines for the Aerospace, Automotive, Military,
- Capabilities: Cleanliness Monitoring / Testing, Environmental Exposure Testing, Environmental Testing and Analysis Services, Failure Analysis, Report Preparation, Sample Retention, Standards Testing / Certification, Other
- Industry Applications: Aerospace / Aviation, Automotive, Chemical / Material Processing, Marine, Military, Nuclear / Utility, Pharmaceutical / Biotech, Packaging, Piping / Pressure Vessel, Semiconductors / Electronics, Structural / Construction
- Materials: Adhesives / Sealants, Ceramics / Glass, Chemicals, Coatings, Composites, Fuel Cell / Battery Materials, Gases, Metals, Petroleum Fluids (Oil, Fuel, Distillates), Plastic / Rubber, Textiles, Wafers / Surfaces, Welds / Joints
- Regional Preference: North America, United States Only, Northeast US Only, Southern US Only, Southwest US Only, Northwest US Only, Midwest US Only, Canada Only
-
Supplier: Foundrax Engineering Products, Ltd.
Description: Foundrax UKAS certified Rockwell and superficial Rockwell hardness reference blocks conform to ISO 6508 and ASTM E18 and our accredited uncertainty of measurement puts us at the top of the industry. Rockwell blocks are available with an optional grid giving the user the opportunity to
- Standard: ASTM, ISO, Rockwell
- Test Applications: Hardness
- Type: Standard / Test Block
-
Supplier: ASTM International
Description: either under natural or accelerated conditions, to meet the physical requirements of this specification. Breaking load test, water absorption test, frost resistance test, warm water test, accelerated weathering test, water tightness and heat/rain resistance shall
-
Supplier: E-Labs, Inc.
Description: E-Labs, Inc. is a Full Service Testing Laboratory, offering customers access to state of the art facilities and personnel. E-Labs personnel have over 40 years of hands on testing experience within all testing disciplines for the Aerospace, Automotive, Military,
- Capabilities: Testing / Simulation, Component / Product Comparison, Consulting / Training, Field Evaluation / On-site Inspection, Qualification / Commissioning, Research and Development, Test Development, Test Fixtures / Equipment, Test Panel / Sample Prep, Witness / Review, Specialty
- Industry Applications: Aerospace / Avionics, Automotive, Alternative / Renewable Energy, Building & Construction, Combustion Equipment, Consumer Products, Electrical Distribution, Fuels / Gas & Oil, Industrial / Machinery, Instrument & Sensors / Laboratory, Lighting / Lasers, Marine, Materials, Motors and Control Systems,
- Materials: Components / Parts, Products, Samples
- Services Offered: Back Flow, Explosive Atmosphere / Intrinsic Safety, Fire Characteristics / Flammability Testing, Specialty
-
Supplier: Aries Electronics, Inc.
Description: 200µ [5.08µ] min. matte Sn per ASTM B545-97(2004)e1 X0TL 200µ [5.08µ] min. 93/7 Sn/Pb per ASTM B545; “X1” 10µ [0.25µ] min. Au per MIL-G-45204 4-FINGER COLLET CONTACT: BeCu per UNS C17200 ASTM B194-08 CONTACT PLATING: 30µ [0.76µ]
- Contact / Pin Type: Solder Tail Pins, Wire Wrap Pins, Other
- Contact Plating: Gold Plating, Nickel Plating
- Contacts Pitch: 2.54 mm
- Current Rating: 3 amps
-
Description: also contains a test on the removal of fibres from carpets; d) as a miscellaneous test, a method for the determination of energy consumption has been added; e) a separate clause on test material and equipment has been added.
-
Supplier: Newark Wire Cloth Company
Description: . Sieve frames stamped using 22 ga. Sheet metal - in some cases 37% thicker than the sieve frames found on competitors test sieves. Stainless Steel Sieve Cloth conforming to ASTM E11 or ISO 3310 specifications. Test Sieve frame is polished - Inside and Out! No ink
- Standard Diameters: 3", 6", 8", 18"
- US Standard as per ASTM E-11: # 6 (3.35 mm), # 12 (1.7 mm), # 14 (1.4 mm), # 30 (600 µm)
-
Supplier: SAE International
Description: When required, unless otherwise specified in the SAE Standards or Recommended Practices, tensile test specimens for metals shall be selected and prepared in accordance with this report. ASTM E 8, Methods of Tension Testing of Metallic Materials, gives more detailed
-
Supplier: SKS Science Products
Description: These glass test tubes are made from KG-33 glass tubing with a sturdy lip and uniform wall thickness for maximum heat transfer and chemical resistance. They feature durable white ceramic enamel marking spots on each tube and are designed from ASTM Specification E982, Type I
- Glass Materials: Other
-
Supplier: E-Labs, Inc.
Description: frequency range of 10 KHz to 40 GHz. If you are concerned about yourproducts ability to withstand electric fields, E-labs will test for RadiatedSusceptibili ty Electric Fields. We cantest your equipment and sub-system enclosures as well as all interconnectingcable s for Radiated
- Accelerated (HALT / HASS): Yes
- Capabilities: Component / Product Comparison, Data Acquisition / Instrumentation, Field Evaluation / On-site Inspection, Evaluation / Trouble Shooting (FMEA), In-process / In-line Testing, Research and Development, Testing / Simulation, Test Development, Test Fixtures / Equipment
- Combined Environments / Conditions: Yes
- Forms Tested / Certified: Components / Parts, Products, Samples
-
Supplier: Gilson Company, Inc.
Description: Calibration Anvil can be used to check the calibration of concrete test hammers after every 1,000-2,000 impacts. The HM-76B has a solid steel 6in (152mm) diameter anvil with a hammer guide and hardened alloy steel rebound plate. A hardness certification to ASTM E 18 requirements
Find Suppliers by Category Top
Featured Products Top
-
and dust, E-Labs, Inc. has recently added to its Sand and Dust testing capabilities. The new facility is a 24 ft. 24 ft. x 10 ft. high, blowing sand and dust chamber able to comply with DO-160 and MIL-STD-810 as well as several ASTM and ISO standards for sand and dust testing of larger vehicles and (read more)
Browse Environmental Exposure (Climatics) Testing Services Datasheets for E-Labs, Inc. -
(2-8°C) or warmer conditions. Weiss Technik supports cold chain testing standards including: • ISTA 7D: Temperature test for transport packaging • ISTA 7E: Thermal transport packaging used in parcel delivery system shipment • ASTM D3103: Thermal insulation (read more)
Browse Environmental Test Chambers and Rooms Datasheets for Weiss Technik North America, Inc. -
Download the Industry Training Requirements The NPI quality system meets the following requirements: ASTM E 543 ISO/IEC 17025 Mil-Q-9858A and NQA-1 Nadcap Accreditation NPI has over (read more)
Browse Nondestructive Testing (NDT) Services Datasheets for NDE Professionals Inc. -
truck, or in a train car during coupling. Whether a simple drop test or a massive rail impact, at E-Labs we can test your containers so you can be sure that your product arrives intact. We cover several MIL standards and ASTM standards for impact testing (read more)
Browse Shock and Vibration (Dynamics) Testing Services Datasheets for E-Labs, Inc. -
: Compliance to ASTM E585 and E2181 available Supplemental NDT testing available Can be supplied in a continuous length (coil) or cut to specific lengths and packaged for short- or long-term storage (read more)
Browse Thermocouple Wire Datasheets for Conax Technologies -
given how the powder coating can react with heat. ASTM E 662-13b Smoke Density Test ASTM E (read more)
Browse Powder Coatings Datasheets for FORREST Technical Coatings -
strength at elevated temperatures. As a toughened system, it is ideal for bonding dissimilar substrates. Supreme 17HT’s unique combination of properties makes it suitable for applications involving repeated exposure to thermal cycling. It also meets NASA low outgassing specifications per ASTM E595 testing. (read more)
Browse Epoxy Adhesives Datasheets for Master Bond, Inc. -
Supreme 17HTND-2 is thermally stable epoxy for bonding and sealing. It is a one part system, featuring a high glass transition temperature (Tg) of 410°F (210°C). It also meets NASA low outgassing specifications per ASTM E595 testing. It has reliable electrical insulation properties and (read more)
Browse Epoxy Adhesives Datasheets for Master Bond, Inc. -
during coupling. Whether a simple drop test or a massive rail impact, at E-Labs we can test your containers so you can be sure that your product arrives intact. We cover several MIL standards and ASTM standards for impact testing (read more)
Browse Shock and Vibration (Dynamics) Testing Services Datasheets for E-Labs, Inc. -
) (Air) Passes 60 second and 12 second vertical test Passes FAA Smoke Density test Passes Toxicity – Draeger tube ASTM E162 (Rail) (read more)
Browse Fabricated Plastic Parts and Semi-Finished Shapes Datasheets for Laird Plastics, Inc.
More Information Top
-
Thermal Conductivity 30/Thermal Expansion 18
Samples were made out of these materials to measure their thermal conductivity under vacuum conditions in the temperature range of -50 to 1500C by an instrument developed as per ASTM E1530 test method.
-
Technical review on thermal conductivity measurement techniques for thin thermal interfaces
Many tests are carried out using ASTM Test Methods E1530 , D5470 and F433.
-
Contribution to the Sustainable Management of Resources by Novel Combination of Industrial Solid Residues into Red Ceramics
… specimens were determined according to the ASTM C67-03a Standard Test (Methods for Sampling and Testing Brick and Struc- tural Clay Tile), whereas the thermal conductivity was tested at 25°C in accordance with the ASTM E1530 Standard Test (Method for Evaluating the …
-
Advanced Materials for Thermal Management of Electronic Packaging
Guarded or Unguarded Heat Flow Meter Method ( ASTM C518, E1530 Test Methods .
-
Flammability and thermal characterization of PMMA/clay nanocomposites and thermal kinetics analysis
Thermal conductivity characterization was carried out according to the ASTM E1530 -06 standard test method using Unitherm2 Model 2022 Anter corporation, accord- ing to guarded heat flow meter technique.