Transformer Isolated Relay Solid State Relays
from Viconics Technologies Inc.
Viconics ’ R810 power switches have been designed for safe and reliable control of electric heat loads. This broad line of value priced products is used by most major North American duct heater manufacturers. The appropriate PWM or pulsed input signal can be provided by a DDC panel or Viconics... [See More]
- Solid State Relay Type: Transformer
- Mounting: Panel
- Application Type: General
- Input Voltage (Control Signal) Type: DC
from CARLO GAVAZZI Automation Components
The RK Series comes with features that provide time-saving installation and a reduction in downtime, thanks to trouble-free solid state operation, during the lifetime of the SSR. It conforms to global standards such as UL 508, CSA C22.2 and EN 60947-4-3; therefore, it can be used globally in... [See More]
- Solid State Relay Type: Transformer
- Mounting: Socket or Plug-in Style
- Application Type: General
- Input Voltage (Control Signal) Type: DC
from Measurement Computing
Solid state relay, quad, VAC input, 90 to 140 Vrms/VDC. Key Highlights. Four inputs per module. 4000 Vrms isolation. Low cost [See More]
- Solid State Relay Type: Transformer
- Mounting: PCBoard
- Application Type: General
- Input Voltage (Control Signal) Type: AC; DC
from CARLO GAVAZZI Automation Components
RMD3H combines the benefits of solid state relays and electromechanical relays to provide a hybrid relay. This means that there is virtually no contact arcing and much less heat emission inside the panel. RMD3H switches heaters on three legs while RMD2H has two poles which are switched and the third... [See More]
- Solid State Relay Type: Transformer
- Mounting: Bracket (Flange) Mount
- Application Type: General
- Input Voltage (Control Signal) Type: AC; DC
from Measurement Computing
Solid state relay module, quad, VAC input, 180 to 280 Vrms/VDC. Key Highlights. Four inputs per module. 4000 Vrms isolation. Low cost [See More]
- Solid State Relay Type: Transformer
- Mounting: PCBoard
- Application Type: General
- Input Voltage (Control Signal) Type: AC; DC
from CARLO GAVAZZI Automation Components
The DC switching relay for PCB mounting is used in applications where there is a need for fast switching of small DC loads with a high input/output insulation of more than 4000 VACrms. The DC switching relay always switches on and off in accordance with the applied control voltage. DC Solid State... [See More]
- Solid State Relay Type: Transformer
- Mounting: PCBoard
- Application Type: General
- Input Voltage (Control Signal) Type: DC
from Measurement Computing
Solid state relay module, quad, VDC input, 3.3 to 32 VDC. Key Highlights. Four inputs per module. 4000 Vrms isolation. Low cost [See More]
- Solid State Relay Type: Transformer
- Mounting: PCBoard
- Application Type: General
- Input Voltage (Control Signal) Type: DC
from CARLO GAVAZZI Automation Components
This new range of solid state contactors presents a unique opportunity to maximize efficiency in panel space and is an evolution of solid state switches for which Carlo Gavazzi is very well known. The nominal current ratings are at 40 ˚C. The smallest width is 17.5mm and is rated at 37 AAC. [See More]
- Solid State Relay Type: Transformer
- Mounting: DIN
- Application Type: General
- Input Voltage (Control Signal) Type: AC; DC
from Measurement Computing
Solid state relay module, quad, VAC output, 12 to 140 VAC, 3 amps rms. Key Highlights. Four inputs per module. 4000 Vrms isolation. Low cost [See More]
- Solid State Relay Type: Transformer
- Mounting: PCBoard
- Application Type: General
- Input Voltage (Control Signal) Type: DC
from CARLO GAVAZZI Automation Components
This new range of solid state contactors presents a unique opportunity to maximize efficiency in panel space and is an evolution of solid state switches for which Carlo Gavazzi is very well known. The nominal current ratings are at 40 ˚C. The smallest width is 17.5mm and is rated at 25 AAC. [See More]
- Solid State Relay Type: Transformer
- Mounting: DIN
- Application Type: General
- Input Voltage (Control Signal) Type: AC; DC
from Measurement Computing
Solid state relay module, quad, VAC output, 24 to 280 VAC, 3 amps rms. Key Highlights. Four inputs per module. 4000 Vrms isolation. Low cost [See More]
- Solid State Relay Type: Transformer
- Mounting: PCBoard
- Application Type: General
- Input Voltage (Control Signal) Type: DC
from CARLO GAVAZZI Automation Components
This slim RG design is capable of detecting various failure modes occurring to the heaters and also to the product itself. Failures which can be detected include partial load failure, heater loss, open circuit SSR, short circuit SSR and SSR over temperature. A normally closed, potential free alarm,... [See More]
- Solid State Relay Type: Transformer
- Mounting: DIN
- Application Type: General
- Input Voltage (Control Signal) Type: DC
from Measurement Computing
Solid state relay module, quad, VDC output, 3 to 60 VDC, 3.5 amps. Key Highlights. Four inputs per module. 4000 Vrms isolation. Low cost [See More]
- Solid State Relay Type: Transformer
- Mounting: PCBoard
- Application Type: General
- Input Voltage (Control Signal) Type: DC
from CARLO GAVAZZI Automation Components
This range of Solid State Contactors offers the possibility of 1600Vp blocking voltage as well as the use of Miniature Circuit Breakers for short circuit protection due to the use of power chips with high I ²t ratings. The product dimensions can go as narrow as 17.5mm for 23 AAC at 40 °C. [See More]
- Solid State Relay Type: Transformer
- Mounting: DIN
- Application Type: General
- Input Voltage (Control Signal) Type: AC; DC
from Measurement Computing
Solid state relay module, quad, VDC output, 5 to 200 VDC, 3.5 amp. Key Highlights. Four inputs per module. 4000 Vrms isolation. Low cost [See More]
- Solid State Relay Type: Transformer
- Mounting: PCBoard
- Application Type: General
- Input Voltage (Control Signal) Type: DC
from CARLO GAVAZZI Automation Components
Aim of this solid state switching device is to switch heater loads and motor loads frequently. The range offers solutions up to 90 AAC in 17.5 mm width. Output connections are via a screw connection, having a captivated washer allowing for safe looping or via box clamp which can handle cables up to... [See More]
- Solid State Relay Type: Transformer
- Mounting: DIN
- Application Type: General
- Input Voltage (Control Signal) Type: AC; DC
from Measurement Computing
Solid state relay module, single, AC sense, 90 to 140 VAC. Key Highlights. 4000 Vrms isolation. Low cost [See More]
- Solid State Relay Type: Transformer
- Mounting: PCBoard
- Application Type: General
- Input Voltage (Control Signal) Type: AC; DC
from CARLO GAVAZZI Automation Components
The analog switching relay works in accordance with the phase angle control principle, i.e., the output switching point in the AC sine wave depends on the control input which can be either 4-20mA or 0-10VDC. 4 mA or 0VDC correspond to zero output power whilst 20 mA or 10VDC correspond to full output... [See More]
- Solid State Relay Type: Transformer
- Mounting: Socket or Plug-in Style
- Application Type: General
- Input Voltage (Control Signal) Type: DC
from Measurement Computing
Solid state relay module, single, AC sense, 180 to 280 VAC/VDC. Key Highlights. 4000 Vrms isolation. Low cost [See More]
- Solid State Relay Type: Transformer
- Mounting: PCBoard
- Application Type: General
- Input Voltage (Control Signal) Type: AC; DC
from CARLO GAVAZZI Automation Components
The RG..M solid state relays incorporate monitoring functions for fast failure detection on top of the switching capability in a slim 17.8 mm platform (up to 30 AAC). Timely detection for mains loss, load loss, SSR open and short circuit, SSR internal fault and supply out range are all possible with... [See More]
- Solid State Relay Type: Transformer
- Mounting: DIN
- Application Type: General
- Input Voltage (Control Signal) Type: AC; DC
from Measurement Computing
Solid state relay module, single, DC sense, 3 to 32 VDC. Key Highlights. 4000 Vrms isolation. Low cost [See More]
- Solid State Relay Type: Transformer
- Mounting: PCBoard
- Application Type: General
- Input Voltage (Control Signal) Type: DC
from CARLO GAVAZZI Automation Components
This product is intended to replace mechanical contactors especially when switching is frequent. The smallest product width in the RGC2, RGC3 range is 54 mm (3xDIN) and goes up to 70 mm. 2-pole and 3-pole switching options are available. Apart from resistive and slightly inductive loads, the RGC is... [See More]
- Solid State Relay Type: Transformer
- Mounting: DIN
- Application Type: General
- Output Voltage Type: AC
from Measurement Computing
Solid state relay module, single, DC sense, 15 to 32 VAC, 10 to 32 VDC non-polarized digital inputs. Key Highlights. 4000 Vrms isolation. Low cost [See More]
- Solid State Relay Type: Transformer
- Mounting: PCBoard
- Application Type: General
- Input Voltage (Control Signal) Type: AC; DC