Standard Slide Switches
Last Updated: April 1, 2025
Description
Standard slide switches are devices used to open or close an electrical circuit by sliding a switch handle. They typically feature a handle that can be either flush or raised, depending on the design and intended application. These switches are commonly used for selecting between different power sources or inputs.
Working Principle
Slide switches operate by moving a slider to connect or disconnect electrical contacts. Most slide switches are of the Single Pole Double Throw (SPDT) variety, which means they have three terminals: one common pin and two pins that compete for connection to the common. This configuration allows the switch to select between two different circuits or power sources. The Double Pole Double Throw (DPDT) configuration is also common, where the common terminal is in the middle, and the two select positions are on the outside. Slide switches are useful because they provide a simple and reliable method for controlling electrical circuits.
Applications
Slide switches are used in a variety of applications, including consumer electronics, where they might be used to switch between different modes or settings on a device. They are also found in industrial equipment for selecting between different operational modes or power sources. Specific examples include their use in audio equipment to toggle between different audio inputs or in lighting systems to switch between different lighting modes.
Advantages over other Slide Switches
Unfortunately, the specific advantages of standard slide switches over other types of slide switches are not detailed in the provided documents.
Limitations
The documents do not provide specific limitations of standard slide switches. However, general limitations of mechanical switches, which may apply to slide switches, include wear due to physical contact and potential limitations in switching high currents.
Considerations
The documents do not provide specific considerations for standard slide switches. However, general considerations for mechanical switches might include initial costs, which are typically lower than solid-state switches, and operating expenses, which may be influenced by the durability and maintenance requirements due to mechanical wear. Durability and accuracy can vary based on the quality of the switch and its intended application, while replacement and maintenance costs are generally low but can increase with frequent use or in harsh environments.
from DigiKey
Slide Switch DPDT Surface Mount, Right Angle [See More]
- Size: Standard
- Pole & Throw Specifications: Double Pole, Double Throw (DPDT)
- Maintained Switch Function: Maintained; ON / ON (Low / High)
- Current Rating: 0.3000
from DigiKey
Slide Switch DPDT Surface Mount, Right Angle [See More]
- Size: Standard
- Pole & Throw Specifications: Double Pole, Double Throw (DPDT)
- Maintained Switch Function: Maintained; ON / ON (Low / High)
- Mechanical Life: 15000
from DigiKey
Slide Switch 4PDT Surface Mount [See More]
- Size: Standard
- Pole & Throw Specifications: 4PDT
- Maintained Switch Function: Maintained; ON / ON (Low / High)
- Mechanical Life: 15000
from DigiKey
Slide Switch SPDT Panel Mount [See More]
- Size: Standard
- Pole & Throw Specifications: Single Pole, Double Throw (SPDT)
- Maintained Switch Function: Maintained; ON / ON (Low / High)
- Actuator Material: Plastic
from DigiKey
Slide Switch SPDT Panel Mount [See More]
- Size: Standard
- Pole & Throw Specifications: Single Pole, Double Throw (SPDT)
- Maintained Switch Function: Maintained; ON / ON (Low / High)
- Current Rating: 6
from DigiKey
Slide Switch SPDT Through Hole [See More]
- Size: Standard
- Pole & Throw Specifications: Single Pole, Double Throw (SPDT)
- Maintained Switch Function: Maintained; ON / ON (Low / High)
- Current Rating: 6
from DigiKey
Slide Switch SPDT Through Hole, Right Angle [See More]
- Size: Standard
- Pole & Throw Specifications: Single Pole, Double Throw (SPDT)
- Maintained Switch Function: Maintained; ON / ON (Low / High)
- Current Rating: 6
from DigiKey
Slide Switch SPDT Through Hole [See More]
- Size: Standard
- Pole & Throw Specifications: Single Pole, Double Throw (SPDT)
- Momentary Switch Function: Momentary; Normally Open (NO)
- Current Rating: 6
from DigiKey
Slide Switch DPDT Through Hole, Right Angle [See More]
- Size: Standard
- Pole & Throw Specifications: Double Pole, Double Throw (DPDT)
- Maintained Switch Function: Maintained; ON / ON (Low / High)
- Current Rating: 6
from DigiKey
SWITCH SLIDE SPDT 0.1A 12V [See More]
- Size: Standard
- Pole & Throw Specifications: Single Pole, Double Throw (SPDT)
- Maintained Switch Function: Maintained; ON / ON (Low / High)
- Current Rating: 0.1000
from DigiKey
SWITCH SLIDE SPDT 0.3A 6V [See More]
- Size: Standard
- Pole & Throw Specifications: Single Pole, Double Throw (SPDT)
- Maintained Switch Function: Maintained; ON / ON (Low / High)
- Current Rating: 0.3000
from DigiKey
SWITCH SLIDE SPDT 4A 125V [See More]
- Size: Standard
- Pole & Throw Specifications: Single Pole, Double Throw (SPDT)
- Maintained Switch Function: Maintained; ON / ON (Low / High)
- Current Rating: 4
from DigiKey
Slide Switch [See More]
- Size: Standard
- Pole & Throw Specifications: Double Pole, Single Throw (DPST)
- Maintained Switch Function: Maintained; ON/OFF
- Current Rating: 4
from DigiKey
SLIDE SWITCHES .1A @ 12VDC SPDT [See More]
- Size: Standard
- Pole & Throw Specifications: Single Pole, Double Throw (SPDT)
- Maintained Switch Function: Maintained; ON / ON (Low / High)
- Current Rating: 0.1000
from DigiKey
SWITCH SLIDE SPDT 0.1A 12V [See More]
- Size: Standard
- Pole & Throw Specifications: Single Pole, Double Throw (SPDT)
- Maintained Switch Function: Maintained; ON / ON (Low / High)
- Current Rating: 0.1000
from DigiKey
SWITCH SLIDE SPDT 0.1A 12V [See More]
- Size: Standard
- Pole & Throw Specifications: Single Pole, Double Throw (SPDT)
- Maintained Switch Function: Maintained; ON / ON (Low / High)
- Current Rating: 0.1000
from DigiKey
SWITCH SLIDE SPDT 0.3A 6V [See More]
- Size: Standard
- Pole & Throw Specifications: Single Pole, Double Throw (SPDT)
- Maintained Switch Function: Maintained; ON / ON (Low / High)
- Current Rating: 0.3000
from DigiKey
Slide Switch SPDT Panel Mount [See More]
- Size: Standard
- Pole & Throw Specifications: Single Pole, Double Throw (SPDT)
- Maintained Switch Function: Maintained; ON / ON (Low / High)
- Current Rating: 1 to 6
from DigiKey
Slide Switch SPDT Through Hole, Right Angle [See More]
- Size: Standard
- Pole & Throw Specifications: Single Pole, Double Throw (SPDT)
- Maintained Switch Function: Maintained; ON / ON (Low / High)
- Current Rating: 0.3000
from DigiKey
Slide Switch DPDT Through Hole, Right Angle [See More]
- Size: Standard
- Pole & Throw Specifications: Double Pole, Double Throw (DPDT)
- Maintained Switch Function: Maintained; ON / ON (Low / High)
- Current Rating: 0.3000
from DigiKey
Slide Switch SPDT Through Hole [See More]
- Size: Standard
- Pole & Throw Specifications: Single Pole, Double Throw (SPDT)
- Maintained Switch Function: Maintained; ON / ON (Low / High)
- Current Rating: 0.3000
from DigiKey
Slide Switch SPDT Through Hole [See More]
- Size: Standard
- Pole & Throw Specifications: Single Pole, Double Throw (SPDT)
- Maintained Switch Function: Maintained; ON / ON (Low / High)
- Current Rating: 0.3000
from DigiKey
Slide Switch DP3T Through Hole [See More]
- Size: Standard
- Pole & Throw Specifications: DP3T
- Maintained Switch Function: Maintained; ON / ON (Low / High)
- Current Rating: 0.3000
from DigiKey
SWITCH SLIDE DP3T 3A 125V [See More]
- Size: Standard
- Pole & Throw Specifications: DP3T
- Maintained Switch Function: Maintained; ON / ON (Low / High)
- Current Rating: 0.5000 to 3
from DigiKey
Slide Switch SPDT Through Hole [See More]
- Size: Standard
- Pole & Throw Specifications: Single Pole, Double Throw (SPDT)
- Maintained Switch Function: Maintained; ON / ON (Low / High)
- Mechanical Life: 30000
from Excel Cell Electronic USA Corp.
Low contact resistance, long mechanical life, suitable for signal switching [See More]
- Size: Standard
- Maintained Switch Function: Maintained; ON/OFF
- Actuator Type: Raised Handle
- Pole & Throw Specifications: Single Pole, Single Throw (SPST)
from ITW Switches USA
DOUBLE POLE LINE VOLTAGE SELECTOR SWITCHES. This rugged fully enclosed housing is built for tough applications. The positive detect action, status indication and variety of contact configurations make this series ideal for a variety of needs. KEY FEATURES: • Status indication: variety of... [See More]
- Size: Standard
- Maintained Switch Function: Maintained; ON/OFF
- Actuator Type: Raised Handle
- Pole & Throw Specifications: Double Pole, Double Throw (DPDT)
from C&K Components
Features/Benefits. Ratings up to 10 AMPS. Snap-in panel and PC mounting. Actuators with screwdriver slot. Quick connect terminals available. RoHS compliant. Typical Applications. Appliances [See More]
- Size: Standard
- Maintained Switch Function: Maintained; ON / ON (Low / High)
- Actuator Type: Flush Handle
- Pole & Throw Specifications: Single Pole, Single Throw (SPST) (optional feature); Single Pole, Double Throw (SPDT) (optional feature); Double Pole, Single Throw (DPST) (optional feature); Double Pole, Double Throw (DPDT) (optional feature)
from Trigon Components, Inc.
SERIES. SKS. DESCRIPTION. Side Knob Slide Switch. RATING. 0.3A, 30VDC. WITHSTAND VOLTAGE. 100V to 500AC. WORKING TEMPERATURE. -10 °C to +80 Deg C. PACKAGE. TH [See More]
- Size: Miniature; Standard
- Maintained Switch Function: Maintained
- Actuator Type: Raised Handle
- Pole & Throw Specifications: Single Pole, Double Throw (SPDT); Double Pole, Double Throw (DPDT); SP3T, SP4T, DP3T, DP4T, 4P3T
from ITW Switches USA
COMMERCIAL SLIDE SWITCH. This small slide switch is ideal for a variety of applications where long life and reliability is required. With the compact design the switch can carry loads up to 6 amps. KEY FEATURES: • Compact space saver. • Simple trouble-free design. • Long life. •... [See More]
- Size: Standard
- Maintained Switch Function: Maintained; ON/OFF
- Actuator Type: Raised Handle
- Pole & Throw Specifications: Double Pole, Double Throw (DPDT)
from C&K Components
Typical Applications. Portable tools. Small appliances. Floor care products [See More]
- Size: Standard
- Maintained Switch Function: Maintained (optional feature); ON/OFF (optional feature); ON / ON (Low / High) (optional feature)
- Actuator Type: Raised Handle
- Momentary Switch Function: Momentary (optional feature); Normally Open (NO) (optional feature); Normally Closed (NC) (optional feature)
from Trigon Components, Inc.
SERIES. SWS. DESCRIPTION. Slide Switch. RATING. 0.3A, 30VDC. WITHSTAND VOLTAGE. 500VAC. WORKING TEMPERATURE. -10 °C to +70 Deg C. PACKAGE. TH [See More]
- Size: Miniature; Standard
- Maintained Switch Function: Maintained
- Actuator Type: Raised Handle
- Pole & Throw Specifications: Single Pole, Double Throw (SPDT); Double Pole, Double Throw (DPDT); SP3T, DP3T, DP4T, 4PDT, 4P3T
from C&K Components
Features/Benefits. Reliable contact design ensures long electrical life. Ratings up to 3 AMPS. Epoxy terminal-seal compatible with bottom wash cleaning. RoHS compliant. Typical Applications. Test & measurement equipment. Computers & peripherals. Telecommunications & networking equipment [See More]
- Size: Standard
- Maintained Switch Function: Maintained; Three Position (Center-OFF) (optional feature); Three Position (No Center-OFF) (optional feature)
- Actuator Type: Raised Handle
- Pole & Throw Specifications: Single Pole, Single Throw (SPST) (optional feature); Single Pole, Double Throw (SPDT) (optional feature)