Stainless Steel Strain Reliefs
from Powell Electronics, Inc.
STAINLESS STEEL - STRAIN RELIEF/CLAMPS [See More]
- Material: Stainless Steel
from PennEngineering®
Features: Break-Thru Skinned-Over glands offer flexibility to use from 1 to 31 of the available holes while still providing a liquid tight seal around the wire. Rolled grease-free threads prevent galling and allow for multiple assemblies and disassemblies. Approved for NEMA 4, 4X, 6 and 6P... [See More]
- Material: Stainless Steel
- Mounting Size: 1 to 2
- Length: 2.22 to 2.92
- Operating Temperature: -40 to 100
from Powell Electronics, Inc.
STAINLESS STEEL - STRAIN RELIEF/CLAMPS [See More]
- Material: Stainless Steel
from Powell Electronics, Inc.
STAINLESS STEEL - STRAIN RELIEF/CLAMPS [See More]
- Material: Stainless Steel
from Powell Electronics, Inc.
STAINLESS STEEL - STRAIN RELIEF/CLAMPS [See More]
- Material: Stainless Steel
from Powell Electronics, Inc.
STAINLESS STEEL - STRAIN RELIEF/CLAMPS [See More]
- Material: Stainless Steel
from Powell Electronics, Inc.
STAINLESS STEEL - STRAIN RELIEF/CLAMPS [See More]
- Material: Stainless Steel
from Powell Electronics, Inc.
STAINLESS STEEL - STRAIN RELIEF/CLAMPS [See More]
- Material: Stainless Steel
from Powell Electronics, Inc.
STAINLESS STEEL - STRAIN RELIEF/CLAMPS [See More]
- Material: Stainless Steel
from Powell Electronics, Inc.
STAINLESS STEEL - STRAIN RELIEF/CLAMPS [See More]
- Material: Stainless Steel
from Powell Electronics, Inc.
STAINLESS STEEL - STRAIN RELIEF/CLAMPS [See More]
- Material: Stainless Steel
from Powell Electronics, Inc.
STAINLESS STEEL - STRAIN RELIEF/CLAMPS [See More]
- Material: Stainless Steel
from Powell Electronics, Inc.
STAINLESS STEEL - STRAIN RELIEF/CLAMPS [See More]
- Material: Stainless Steel
from Powell Electronics, Inc.
STAINLESS STEEL - STRAIN RELIEF/CLAMPS [See More]
- Material: Stainless Steel
from Powell Electronics, Inc.
STAINLESS STEEL - STRAIN RELIEF/CLAMPS [See More]
- Material: Stainless Steel
from Powell Electronics, Inc.
STAINLESS STEEL - STRAIN RELIEF/CLAMPS [See More]
- Material: Stainless Steel
from Powell Electronics, Inc.
STAINLESS STEEL - STRAIN RELIEF/CLAMPS [See More]
- Material: Stainless Steel
from Powell Electronics, Inc.
STAINLESS STEEL - STRAIN RELIEF/CLAMPS [See More]
- Material: Stainless Steel
from Powell Electronics, Inc.
STAINLESS STEEL - STRAIN RELIEF/CLAMPS [See More]
- Material: Stainless Steel
from Powell Electronics, Inc.
STAINLESS STEEL - STRAIN RELIEF/CLAMPS [See More]
- Material: Stainless Steel
from Powell Electronics, Inc.
STAINLESS STEEL - STRAIN RELIEF/CLAMPS [See More]
- Material: Stainless Steel
from Powell Electronics, Inc.
STAINLESS STEEL - STRAIN RELIEF/CLAMPS [See More]
- Material: Stainless Steel
from Powell Electronics, Inc.
STAINLESS STEEL - STRAIN RELIEF/CLAMPS [See More]
- Material: Stainless Steel
from Powell Electronics, Inc.
STAINLESS STEEL - STRAIN RELIEF/CLAMPS [See More]
- Material: Stainless Steel
from Powell Electronics, Inc.
STAINLESS STEEL - STRAIN RELIEF/CLAMPS [See More]
- Material: Stainless Steel
from Powell Electronics, Inc.
STAINLESS STEEL - STRAIN RELIEF/CLAMPS [See More]
- Material: Stainless Steel
from icotek GmbH
The RLFZ is a further development of the EMC clamp assembly. The combination of EMC shielding and strain relief is the key feature of this system. Thus the specification according to EN 50262 / EN 62444 is achieved. There are 10 different carriers available, which can be user configured with up to... [See More]
- Material: Stainless Steel
- Length: 1.62 to 7.15
- Diameter: 0.059 to 0.433
- Features: EMI / RFI Shielding
from icotek Corp
The EMC strain relief plate KAFM is practical for grounding interferences on the cable shield. The cable assembly can be assembled on a mounting plate with screws, with SC-feet on C section rails C30 or with MF-feet on TS35 rails. Advantages & Benefits. Universal solution [See More]
- Material: Stainless Steel; Stainless steel
- Length: 1.02
from O-Z/Gedney
1-PIECE PLUG, SPLIT TYPE. MOLDED CANVAS BAKELITE (BODY), ZINC PLATED STEEL (BAND), STAINLESS STEEL (BOLT/NUT) MATERIAL. 2-5/8 INCH DIA X 2 INCH H SIZE. NON-ARMORED CABLE TYPE. UL 514B, CSA C22.2 APPROVAL. 600 V VOLTAGE RATING. 2 TO 4 (SAME SIZE) CONDUCTOR(S). 18 TO 8 AWG, 6 TO 0 AWG, 2/0 TO 4/0 AWG,... [See More]
- Material: Cloth; Stainless Steel; Molded Canvas Bakelite (Body), Zinc Plated Steel (Band), Stainless Steel (Bolt/Nut)
- Diameter: 2.625
from icotek GmbH
The SF|RLFZ is based upon the RLFZ clamp assembly, which is mounted on SNAP-feet for 35 mm DIN rails shape H. There are 10 different carriers available, which can be user configured with up to 12 SKL shield clamps. Advantages. High packing density due to optimized arrangement. Possibility to... [See More]
- Material: Stainless Steel
- Length: 1.62 to 7.15
- Diameter: 0.059 to 0.433
- Features: EMI / RFI Shielding
from icotek Corp
The EMC strain relief plate KAFM is practical for grounding interferences on the cable shield. The cable assembly can be assembled on a mounting plate with screws, with SC-feet on C section rails C30 or with MF-feet on TS35 rails. Advantages & Benefits. Universal solution [See More]
- Material: Stainless Steel; Stainless steel
- Length: 1.97
from O-Z/Gedney
MULTIPLE SEGMENT PLUG, SPLIT TYPE. MOLDED CANVAS BAKELITE BODY, ZINC PLATED STEEL BAND, STAINLESS STEEL BOLT/NUT MATERIAL. 2-5/8 INCH DIA X 2 INCH H SIZE. NON ARMORED CABLE TYPE. UL 514-B, CSA C22.2 APPROVAL. 1 TO 4 (SAME SIZE) CONDUCTOR(S). 18 TO 8 AWG, 6 TO 0 AWG, 2/0 TO 4/0 AWG, 4/0 AWG TO 750... [See More]
- Material: Cloth; Stainless Steel; MOLDED CANVAS BAKELITE BODY, ZINC PLATED STEEL BAND, STAINLESS STEEL BOLT/NUT
- Diameter: 2.625
from icotek GmbH
LFZ|SKL shield clamps can be used for shielding single cables. The shield clamps are easy to use and enable a reliable shielding of cables. Cables are secured with a cable tie. Strain relief in accordance with EN 50262 / EN 62444 standards is achieved. Shield clamps are easily attached to mounting... [See More]
- Material: Stainless Steel
- Features: EMI / RFI Shielding
- Diameter: 0.059 to 1.142
from icotek Corp
The EMC strain relief plate KAFM is practical for grounding interferences on the cable shield. The cable assembly can be assembled on a mounting plate with screws, with SC-feet on C section rails C30 or with MF-feet on TS35 rails. Advantages & Benefits. Universal solution [See More]
- Material: Stainless Steel; Stainless steel
- Length: 0.4724
from icotek GmbH
Comparable with the PFK|SKL range, the PFKZ|SKL shield clamps can be used for shielding single cables. The PFKZ range provides the possibility to affix the cable with a cable tie. Strain relief in accordance with EN 50262 / EN 62444 standards is achieved. PFKZ|SKL clamps are used where a screw... [See More]
- Material: Stainless Steel
- Features: EMI / RFI Shielding
- Diameter: 0.059 to 0.433
from icotek Corp
The EMC strain relief plate KAFM is practical for grounding interferences on the cable shield. The cable assembly can be assembled on a mounting plate with screws, with SC-feet on C section rails C30 or with MF-feet on TS35 rails. Advantages & Benefits. Universal solution [See More]
- Material: Stainless Steel; Stainless steel
- Length: 7.19
from icotek GmbH
Comparable with the PFS|SKL range, the PFSZ|SKL shield clamps can be used for shielding single cables. They are used for mounting on 10 × 3 mm bus bars. The PFSZ range provides possibility to fix the cable with a cable tie. Strain relief in accordance with EN 50262 / EN 62444 is achieved. [See More]
- Material: Stainless Steel
- Features: EMI / RFI Shielding
- Diameter: 0.059 to 0.433
from icotek Corp
The EMC strain relief plate KAFM is practical for grounding interferences on the cable shield. The cable assembly can be assembled on a mounting plate with screws, with SC-feet on C section rails C30 or with MF-feet on TS35 rails. Advantages & Benefits. Universal solution [See More]
- Material: Stainless Steel; Stainless steel
- Length: 1.99
from icotek GmbH
The shield clamps SFZ|SKL are used for shielding single cables in combination with strain relief. Simple to use and effective shielding of cables. Cables are secured with a cable tie. Strain relief in accordance with EN 50262 / EN 62444 is achieved. For assembly on 35 mm DIN rails. Advantages. [See More]
- Material: Stainless Steel
- Features: EMI / RFI Shielding
- Diameter: 0.059 to 1.142
from icotek Corp
The EMC strain relief plate KAFM is practical for grounding interferences on the cable shield. The cable assembly can be assembled on a mounting plate with screws, with SC-feet on C section rails C30 or with MF-feet on TS35 rails. Advantages & Benefits. Universal solution [See More]
- Material: Stainless Steel; Stainless steel
- Length: 3.29
from icotek GmbH
The EMC terminal clamp STFZ|SKL combines the functions strain relief, cable guidance and shielding of signal cables on decentralized bus-modules of numerous manufacturers. Available in two versions for 1 or 2 lines. The STFZ2 is used for analog I/O modules using two actuators/sensors. For the... [See More]
- Material: Stainless Steel
- Features: EMI / RFI Shielding
- Diameter: 0.059 to 0.315
from icotek Corp
The EMC strain relief plate KAFM is practical for grounding interferences on the cable shield. The cable assembly can be assembled on a mounting plate with screws, with SC-feet on C section rails C30 or with MF-feet on TS35 rails. Advantages & Benefits. Universal solution [See More]
- Material: Stainless Steel; Stainless steel
- Length: 4.59
from icotek Corp
The EMC strain relief plate KAFM is practical for grounding interferences on the cable shield. The cable assembly can be assembled on a mounting plate with screws, with SC-feet on C section rails C30 or with MF-feet on TS35 rails. Advantages & Benefits. Universal solution [See More]
- Material: Stainless Steel; Stainless steel
- Length: 5.89
from icotek Corp
The EMC strain relief plate KAFM is practical for grounding interferences on the cable shield. The cable assembly can be assembled on a mounting plate with screws, with SC-feet on C section rails C30 or with MF-feet on TS35 rails. Advantages & Benefits. Universal solution [See More]
- Material: Stainless Steel; Stainless steel
- Length: 1.99
from icotek Corp
The EMC strain relief plate KAFM is practical for grounding interferences on the cable shield. The cable assembly can be assembled on a mounting plate with screws, with SC-feet on C section rails C30 or with MF-feet on TS35 rails. Advantages & Benefits. Universal solution [See More]
- Material: Stainless Steel; Stainless steel
- Length: 3.29
from icotek Corp
The EMC strain relief plate KAFM is practical for grounding interferences on the cable shield. The cable assembly can be assembled on a mounting plate with screws, with SC-feet on C section rails C30 or with MF-feet on TS35 rails. Advantages & Benefits. Universal solution [See More]
- Material: Stainless Steel; Stainless steel
- Length: 4.59
from icotek Corp
The EMC strain relief plate KAFM is practical for grounding interferences on the cable shield. The cable assembly can be assembled on a mounting plate with screws, with SC-feet on C section rails C30 or with MF-feet on TS35 rails. Advantages & Benefits. Universal solution [See More]
- Material: Stainless Steel; Stainless steel
- Length: 5.89
from icotek Corp
The EMC strain relief plate KAFM is practical for grounding interferences on the cable shield. The cable assembly can be assembled on a mounting plate with screws, with SC-feet on C section rails C30 or with MF-feet on TS35 rails. Advantages & Benefits. Universal solution [See More]
- Material: Stainless Steel; Stainless steel
- Length: 7.19
from icotek Corp
The EMC strain relief plate KAFM is practical for grounding interferences on the cable shield. The cable assembly can be assembled on a mounting plate with screws, with SC-feet on C section rails C30 or with MF-feet on TS35 rails. Advantages & Benefits. Universal solution [See More]
- Material: Stainless Steel; Stainless steel
- Length: 1.99
from icotek Corp
The EMC strain relief plate KAFM is practical for grounding interferences on the cable shield. The cable assembly can be assembled on a mounting plate with screws, with SC-feet on C section rails C30 or with MF-feet on TS35 rails. Advantages & Benefits. Universal solution [See More]
- Material: Stainless Steel; Stainless steel
- Length: 3.29
from icotek Corp
The EMC strain relief plate KAFM is practical for grounding interferences on the cable shield. The cable assembly can be assembled on a mounting plate with screws, with SC-feet on C section rails C30 or with MF-feet on TS35 rails. Advantages & Benefits. Universal solution [See More]
- Material: Stainless Steel; Stainless steel
- Length: 4.59
from icotek Corp
The EMC strain relief plate KAFM is practical for grounding interferences on the cable shield. The cable assembly can be assembled on a mounting plate with screws, with SC-feet on C section rails C30 or with MF-feet on TS35 rails. Advantages & Benefits. Universal solution [See More]
- Material: Stainless Steel; Stainless steel
- Length: 5.89
from icotek Corp
The EMC strain relief plate KAFM is practical for grounding interferences on the cable shield. The cable assembly can be assembled on a mounting plate with screws, with SC-feet on C section rails C30 or with MF-feet on TS35 rails. Advantages & Benefits. Universal solution [See More]
- Material: Stainless Steel; Stainless steel
- Length: 7.19
from icotek Corp
The EMC strain relief plate KAFM is practical for grounding interferences on the cable shield. The cable assembly can be assembled on a mounting plate with screws, with SC-feet on C section rails C30 or with MF-feet on TS35 rails. Advantages & Benefits. Universal solution [See More]
- Material: Stainless Steel; Stainless steel
- Length: 1.99
from icotek Corp
The EMC strain relief plate KAFM is practical for grounding interferences on the cable shield. The cable assembly can be assembled on a mounting plate with screws, with SC-feet on C section rails C30 or with MF-feet on TS35 rails. Advantages & Benefits. Universal solution [See More]
- Material: Stainless Steel; Stainless steel
- Length: 3.29
from icotek Corp
The EMC strain relief plate KAFM is practical for grounding interferences on the cable shield. The cable assembly can be assembled on a mounting plate with screws, with SC-feet on C section rails C30 or with MF-feet on TS35 rails. Advantages & Benefits. Universal solution [See More]
- Material: Stainless Steel; Stainless steel
- Length: 4.59
from icotek Corp
The EMC strain relief plate KAFM is practical for grounding interferences on the cable shield. The cable assembly can be assembled on a mounting plate with screws, with SC-feet on C section rails C30 or with MF-feet on TS35 rails. Advantages & Benefits. Universal solution [See More]
- Material: Stainless Steel; Stainless steel
- Length: 5.89
from icotek Corp
The EMC strain relief plate KAFM is practical for grounding interferences on the cable shield. The cable assembly can be assembled on a mounting plate with screws, with SC-feet on C section rails C30 or with MF-feet on TS35 rails. Advantages & Benefits. Universal solution [See More]
- Material: Stainless Steel; Stainless steel
- Length: 7.19
from icotek Corp
The EMC strain relief plate KAFM is practical for grounding interferences on the cable shield. The cable assembly can be assembled on a mounting plate with screws, with SC-feet on C section rails C30 or with MF-feet on TS35 rails. Advantages & Benefits. Universal solution [See More]
- Material: Stainless Steel; Stainless steel
- Length: 11.08
from icotek Corp
The EMC strain relief plate KAFM is practical for grounding interferences on the cable shield. The cable assembly can be assembled on a mounting plate with screws, with SC-feet on C section rails C30 or with MF-feet on TS35 rails. Advantages & Benefits. Universal solution [See More]
- Material: Stainless Steel; Stainless steel
- Length: 19.47