Metric Bevel and Miter Gears
from Stock Drive Products & Sterling Instrument - SDP/SI
Bevel gears are conically shaped gears produced as straight, spiral, and zerol bevel gears. The gears are commonly mounted on shafts that are perpendicular to each other. They are used to transfer mechanical energy between intersecting shafts. The shaft angle can be any angle, but bevel gears are... [See More]
- Design: Metric
- Tooth Form: Straight
- Pressure Angle: 20°
- PD: 36
from Hangzhou Chinabase Machinery Co., Ltd.
China Gears and racks manufacturer, we can supply: Spur Gears, Bevel Gears, Worm Gears, Helical Gears, Automobile Gears, Agricultural machinery gears, Spiral Bevel Gears, Helical Bevel Gear, Rack. [See More]
- Design: Metric
- Pressure Angle: 20°
- Number of Teeth: 16 to 64
- Gear Center: Center Bore
from KHK USA, Inc.
Injection molded, mass-produced productions, suitable for office machines. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Design: Metric
- Pressure Angle: 20°; 20 º
- Number of Teeth: 20
- PD: 0.39
from Stock Drive Products & Sterling Instrument - SDP/SI
Bevel gears are conically shaped gears produced as straight, spiral, and zerol bevel gears. The gears are commonly mounted on shafts that are perpendicular to each other. They are used to transfer mechanical energy between intersecting shafts. The shaft angle can be any angle, but bevel gears are... [See More]
- Design: Metric
- PD: 40
- Tooth Form: Spiral
- Face Width: 15
from Hangzhou Chinabase Machinery Co., Ltd.
China Gears and racks manufacturer, we can supply: Spur Gears, Bevel Gears, Worm Gears, Helical Gears, Automobile Gears, Agricultural machinery gears, Spiral Bevel Gears, Helical Bevel Gear, Rack. [See More]
- Design: Metric
- Pressure Angle: 20°
- Number of Teeth: 16 to 60
- Gear Center: Center Bore
from KHK USA, Inc.
Injection molded, mass-produced products, suitable for office machines. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Design: Metric
- Pressure Angle: 20°; 20 º
- Number of Teeth: 20
- PD: 0.39
from Stock Drive Products & Sterling Instrument - SDP/SI
Standard straight-tooth miter gears are a type of bevel gear set that has a 1:1 ratio, identical dimensions, and the same number of teeth, allowing them to mate with one another and transmit rotational motion at a 90 ° angle. Although the number of teeth in a spiral miter gear set is the same,... [See More]
- Design: Metric
- Pressure Angle: 20°
- Number of Teeth: 16
- Tooth Form: Straight
from KHK USA, Inc.
Superior performance with regard to highspeed, low noise, and low vibration. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. Notice: This product is discontinued. Please contact KHK for alternative... [See More]
- Design: Metric
- Pressure Angle: 20°; 20 º
- Number of Teeth: 20
- Features: Ground Teeth
from KHK USA, Inc.
Superior performance with regard to highspeed, low noise, and low vibration. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Design: Metric
- Pressure Angle: 20°; 20 º
- Number of Teeth: 20
- Features: Ground Teeth
from KHK USA, Inc.
Mass-produced, l ow cost si ntered products. Small and light weight. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Design: Metric
- Pressure Angle: 20°; 20 º
- Number of Teeth: 20
- PD: 0.63
from KHK USA, Inc.
Ready to use without performing secondary operations. Strong and abrasion resistant. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. Notice: This product is discontinued. Please contact KHK for... [See More]
- Design: Metric
- Pressure Angle: 20°; 20 º
- Number of Teeth: 45
- Material: Steel; SCM415 (AISI 4115) Alloy Steel
from KHK USA, Inc.
High strength, abrasion-resistant and compact for high-speed & torque use. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Design: Metric
- Pressure Angle: 20°; 20 º
- Number of Teeth: 20
- Features: Ground Teeth
from KHK USA, Inc.
High speed reduction ratio, high efficiency, high rigidity and compact gear assembly. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Design: Metric
- Pressure Angle: 20°; 20 º
- Number of Teeth: 45
- PD: 1.89
from KHK USA, Inc.
Compared to SM miters, these are stronger and less abrasive, and allow secondary operations. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Design: Metric
- Pressure Angle: 20°; 20 º
- Number of Teeth: 20
- PD: 1.57
from KHK USA, Inc.
Compared to SM miters, these are stronger and less abrasive, and allow secondary operations. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Design: Metric
- Pressure Angle: 20°; 20 º
- Number of Teeth: 20
- PD: 1.57
from KHK USA, Inc.
Suitable for food machinery due to SUS303 material's rust-resistant quality. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Design: Metric
- Pressure Angle: 20°; 20 º
- Number of Teeth: 20
- PD: 1.57
from KHK USA, Inc.
Ready to use without performing secondary operations. Strong and abrasion resistant. [See More]
- Design: Metric
- Pressure Angle: 20°; 20 º
- Number of Teeth: 20
- PD: 0.79
from KHK USA, Inc.
High strength, abrasion-resistant and compact for high speed & torque use. [See More]
- Design: Metric
- Pressure Angle: 20°; 20 º
- Number of Teeth: 20
- Features: Ground Teeth
from KHK USA, Inc.
High strength, abrasion-resistant and compact for high speed & torque use. [See More]
- Design: Metric
- Pressure Angle: 20°; 20 º
- Number of Teeth: 20
- Features: Ground Teeth
from KHK USA, Inc.
MC nylon products are light and can be used without lubricant. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Design: Metric
- Pressure Angle: 20°; 20 º
- Number of Teeth: 20
- PD: 0.79
from KHK USA, Inc.
MC nylon products are light and can be used without lubricant. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Design: Metric
- Pressure Angle: 20°; 20 º
- Number of Teeth: 20
- PD: 0.79
from KHK USA, Inc.
3 types are available for shafts at 45 °, 60 ° and 120 °. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Design: Metric
- Pressure Angle: 20°; 20 º
- Number of Teeth: 20
- PD: 1.18
from KHK USA, Inc.
3 types are available for shafts at 45 °, 60 ° and 120 °. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Design: Metric
- Pressure Angle: 20°; 20 º
- Number of Teeth: 20
- PD: 1.18
from KHK USA, Inc.
3 types are available for shafts at 45 °, 60 ° and 120 °. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Design: Metric
- Pressure Angle: 20°; 20 º
- Number of Teeth: 20
- PD: 1.18
from KHK USA, Inc.
Popular series of straight bevel gears for many uses. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Design: Metric
- Pressure Angle: 20°; 20 º
- Number of Teeth: 15
- PD: 0.59
from KHK USA, Inc.
Large nos. of teeth and modules are offered in these affordable spiral bevel gears. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Design: Metric
- Pressure Angle: 20°; 20 º
- Number of Teeth: 20
- PD: 0.79
from KHK USA, Inc.
Reasonably priced ground gear, yet remachinable except for the gear teeth. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Design: Metric
- Pressure Angle: 20°; 20 º
- Number of Teeth: 15
- Features: Ground Teeth
from KHK USA, Inc.
Popular series of straight bevel gears for many uses. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Design: Metric
- Pressure Angle: 20°; 20 º
- Number of Teeth: 15
- PD: 3.54
from KHK USA, Inc.
A spiral bevel gears with a helix angle less than 10 º. Receives forces from the same directions straight bevel gears receive and have excellent precision. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and... [See More]
- Design: Metric
- Pressure Angle: 20°; 20 º
- Number of Teeth: 20
- Features: Ground Teeth
from KHK USA, Inc.
Popular straight miter for many uses. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Design: Metric
- Pressure Angle: 20°; 20 º
- Number of Teeth: 20
- PD: 0.79
from Shenzhen Besta Precision Machinery Co., Ltd.
With extensive experience in the gear manufacturing industry, Besta is pleased to introduce our line of bevel and spiral bevel gears, working with materials including aluminum, ductile iron, and stainless steel. In addition, we can work with non-metals like nylon, plastic, and phenolic, Our size... [See More]
- Design: Metric
- Tooth Form: Straight; Spiral
- Pressure Angle: 20°; 15°, 21.5° & 22.5°
- Module: 1 - 15
from Hymark/Kentucky Gauge
Spiral-toothed bevel gears with arc-shaped teeth are particularly suitable for transmitting forces at a 90 ° angle or at any other angle as required. They can be used at high speeds, with heavy or light loads, for quiet operations, as well as for any applications where space and weight are... [See More]
- Design: Metric
- Module: 0.5-12.0, 0.8-10.0
from QTC METRIC GEARS
Module 1.5, 20 Tooth, 45? Shaft Angle Mild Steel Angular Miter Gear [See More]
- Design: Metric
- PD: 30
- Number of Teeth: 20
- Face Width: 11
from ATLANTA Drive Systems, Inc.
Atlanta standard bevel gears are made of heat-treatable steel Cf 53, material no. 1.1213, having a strength of 650- 800 N/mm ². For heavy-duty application our bevel gears may be subsequently fame or induction hardened. The following calculations therefore always refer to hardened as well as... [See More]
- Design: Metric
- Gear Center: Center Bore
- Number of Teeth: 16
- Tooth Form: Straight
from Shenzhen Besta Precision Machinery Co., Ltd.
With extensive experience in the gear manufacturing industry, Besta is pleased to introduce our line of bevel and spiral bevel gears, working with materials including aluminum, ductile iron, and stainless steel. In addition, we can work with non-metals like nylon, plastic, and phenolic, Our size... [See More]
- Design: Metric
- Tooth Form: Straight; Spiral
- Pressure Angle: 20°; 15°, 21.5° & 22.5°
- Module: 1 - 15
from QTC METRIC GEARS
Nissei Module 1.5, 20 Tooth Alloy Steel Left Hand Threaded Spiral Miter Gear with Finished Bore [See More]
- Design: Metric
- Pressure Angle: 20°
- Number of Teeth: 20
- PD: 30
from QTC METRIC GEARS
Module 1, 40 Tooth Nylon Bevel Gear [See More]
- Design: Metric
- PD: 20
- Pressure Angle: 20°
- Face Width: 6
from QTC METRIC GEARS
Module 1, 45 Tooth Right Handed Alloy Steel Hypoid Gear [See More]
- Design: Metric
- Bore Diameter: 12
- Number of Teeth: 45
- Material: Steel
from QTC METRIC GEARS
Nissei Module 1.5, 13 Tooth Alloy Steel Left Hand Threaded Spiral Bevel Gear with Finished Bore [See More]
- Design: Metric
- Face Width: 7
- PD: 19.5
- Overall Width: 14.5
from QTC METRIC GEARS
Module 0.8, 20 Tooth Sintered Metal Miter Gear [See More]
- Design: Metric
- Pressure Angle: 20°
- Number of Teeth: 20
- PD: 16
from QTC METRIC GEARS
Module 2, 20 Tooth Ground Steel Left Handed Zerol Spiral Bevel Gear [See More]
- Design: Metric
- PD: 40
- Number of Teeth: 20
- Face Width: 11
from QTC METRIC GEARS
Module 2, 20 Tooth Ground Steel Left Handed Zerol Spiral Miter Gear [See More]
- Design: Metric
- PD: 50
- Number of Teeth: 20
- Face Width: 12