20° Bevel and Miter Gears
from Stock Drive Products & Sterling Instrument - SDP/SI
Bevel gears are conically shaped gears produced as straight, spiral, and zerol bevel gears. The gears are commonly mounted on shafts that are perpendicular to each other. They are used to transfer mechanical energy between intersecting shafts. The shaft angle can be any angle, but bevel gears are... [See More]
- Pressure Angle: 20°
- Tooth Form: Straight
- Design: English
- PD: 0.94
from Hangzhou Chinabase Machinery Co., Ltd.
China Gears and racks manufacturer, we can supply: Spur Gears, Bevel Gears, Worm Gears, Helical Gears, Automobile Gears, Agricultural machinery gears, Spiral Bevel Gears, Helical Bevel Gear, Rack. [See More]
- Pressure Angle: 20°
- Design: English
- Number of Teeth: 14 to 60
- Gear Center: Center Bore
from KHK USA, Inc.
Injection molded, mass-produced productions, suitable for office machines. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Pressure Angle: 20°; 20 º
- Design: Metric
- Number of Teeth: 20
- PD: 0.39
from Stock Drive Products & Sterling Instrument - SDP/SI
Bevel gears are conically shaped gears produced as straight, spiral, and zerol bevel gears. The gears are commonly mounted on shafts that are perpendicular to each other. They are used to transfer mechanical energy between intersecting shafts. The shaft angle can be any angle, but bevel gears are... [See More]
- Pressure Angle: 20°
- Tooth Form: Straight
- Design: English
- PD: 1.00
from Hangzhou Chinabase Machinery Co., Ltd.
China Gears and racks manufacturer, we can supply: Spur Gears, Bevel Gears, Worm Gears, Helical Gears, Automobile Gears, Agricultural machinery gears, Spiral Bevel Gears, Helical Bevel Gear, Rack. [See More]
- Pressure Angle: 20°
- Design: Metric
- Number of Teeth: 16 to 64
- Gear Center: Center Bore
from KHK USA, Inc.
Injection molded, mass-produced products, suitable for office machines. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Pressure Angle: 20°; 20 º
- Design: Metric
- Number of Teeth: 20
- PD: 0.39
from Stock Drive Products & Sterling Instrument - SDP/SI
Bevel gears are conically shaped gears produced as straight, spiral, and zerol bevel gears. The gears are commonly mounted on shafts that are perpendicular to each other. They are used to transfer mechanical energy between intersecting shafts. The shaft angle can be any angle, but bevel gears are... [See More]
- Pressure Angle: 20°
- Tooth Form: Straight
- Design: Metric
- PD: 36
from Hangzhou Chinabase Machinery Co., Ltd.
China Gears and racks manufacturer, we can supply: Spur Gears, Bevel Gears, Worm Gears, Helical Gears, Automobile Gears, Agricultural machinery gears, Spiral Bevel Gears, Helical Bevel Gear, Rack. [See More]
- Pressure Angle: 20°
- Design: Metric
- Number of Teeth: 16 to 60
- Gear Center: Center Bore
from KHK USA, Inc.
Superior performance with regard to highspeed, low noise, and low vibration. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. Notice: This product is discontinued. Please contact KHK for alternative... [See More]
- Pressure Angle: 20°; 20 º
- Design: Metric
- Number of Teeth: 20
- Features: Ground Teeth
from Stock Drive Products & Sterling Instrument - SDP/SI
Standard straight-tooth miter gears are a type of bevel gear set that has a 1:1 ratio, identical dimensions, and the same number of teeth, allowing them to mate with one another and transmit rotational motion at a 90 ° angle. Although the number of teeth in a spiral miter gear set is the same,... [See More]
- Pressure Angle: 20°
- Design: English
- Number of Teeth: 12
- Tooth Form: Straight
from KHK USA, Inc.
Superior performance with regard to highspeed, low noise, and low vibration. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Pressure Angle: 20°; 20 º
- Design: Metric
- Number of Teeth: 20
- Features: Ground Teeth
from Stock Drive Products & Sterling Instrument - SDP/SI
Standard straight-tooth miter gears are a type of bevel gear set that has a 1:1 ratio, identical dimensions, and the same number of teeth, allowing them to mate with one another and transmit rotational motion at a 90 ° angle. Although the number of teeth in a spiral miter gear set is the same,... [See More]
- Pressure Angle: 20°
- Design: Metric
- Number of Teeth: 16
- Tooth Form: Straight
from KHK USA, Inc.
Mass-produced, l ow cost si ntered products. Small and light weight. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Pressure Angle: 20°; 20 º
- Design: Metric
- Number of Teeth: 20
- PD: 0.63
from Stock Drive Products & Sterling Instrument - SDP/SI
Standard straight-tooth miter gears are a type of bevel gear set that has a 1:1 ratio, identical dimensions, and the same number of teeth, allowing them to mate with one another and transmit rotational motion at a 90 ° angle. Although the number of teeth in a spiral miter gear set is the same,... [See More]
- Pressure Angle: 20°
- Direction: Left
- Number of Teeth: 20
- Tooth Form: Spiral
from KHK USA, Inc.
Ready to use without performing secondary operations. Strong and abrasion resistant. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. Notice: This product is discontinued. Please contact KHK for... [See More]
- Pressure Angle: 20°; 20 º
- Design: Metric
- Number of Teeth: 45
- Material: Steel; SCM415 (AISI 4115) Alloy Steel
from Stock Drive Products & Sterling Instrument - SDP/SI
Bevel gears are conically shaped gears produced as straight, spiral, and zerol bevel gears. The gears are commonly mounted on shafts that are perpendicular to each other. They are used to transfer mechanical energy between intersecting shafts. The shaft angle can be any angle, but bevel gears are... [See More]
- Pressure Angle: 20°
- Bore Diameter: 0.2498
- Face Width: 0.18
- PD: 48
from KHK USA, Inc.
High strength, abrasion-resistant and compact for high-speed & torque use. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Pressure Angle: 20°; 20 º
- Design: Metric
- Number of Teeth: 20
- Features: Ground Teeth
from KHK USA, Inc.
High speed reduction ratio, high efficiency, high rigidity and compact gear assembly. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Pressure Angle: 20°; 20 º
- Design: Metric
- Number of Teeth: 45
- PD: 1.89
from KHK USA, Inc.
Compared to SM miters, these are stronger and less abrasive, and allow secondary operations. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Pressure Angle: 20°; 20 º
- Design: Metric
- Number of Teeth: 20
- PD: 1.57
from KHK USA, Inc.
Compared to SM miters, these are stronger and less abrasive, and allow secondary operations. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Pressure Angle: 20°; 20 º
- Design: Metric
- Number of Teeth: 20
- PD: 1.57
from KHK USA, Inc.
Suitable for food machinery due to SUS303 material's rust-resistant quality. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Pressure Angle: 20°; 20 º
- Design: Metric
- Number of Teeth: 20
- PD: 1.57
from KHK USA, Inc.
Ready to use without performing secondary operations. Strong and abrasion resistant. [See More]
- Pressure Angle: 20°; 20 º
- Design: Metric
- Number of Teeth: 20
- PD: 0.79
from KHK USA, Inc.
High strength, abrasion-resistant and compact for high speed & torque use. [See More]
- Pressure Angle: 20°; 20 º
- Design: Metric
- Number of Teeth: 20
- Features: Ground Teeth
from KHK USA, Inc.
High strength, abrasion-resistant and compact for high speed & torque use. [See More]
- Pressure Angle: 20°; 20 º
- Design: Metric
- Number of Teeth: 20
- Features: Ground Teeth
from KHK USA, Inc.
MC nylon products are light and can be used without lubricant. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Pressure Angle: 20°; 20 º
- Design: Metric
- Number of Teeth: 20
- PD: 0.79
from KHK USA, Inc.
MC nylon products are light and can be used without lubricant. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Pressure Angle: 20°; 20 º
- Design: Metric
- Number of Teeth: 20
- PD: 0.79
from KHK USA, Inc.
3 types are available for shafts at 45 °, 60 ° and 120 °. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Pressure Angle: 20°; 20 º
- Design: Metric
- Number of Teeth: 20
- PD: 1.18
from KHK USA, Inc.
3 types are available for shafts at 45 °, 60 ° and 120 °. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Pressure Angle: 20°; 20 º
- Design: Metric
- Number of Teeth: 20
- PD: 1.18
from KHK USA, Inc.
3 types are available for shafts at 45 °, 60 ° and 120 °. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Pressure Angle: 20°; 20 º
- Design: Metric
- Number of Teeth: 20
- PD: 1.18
from KHK USA, Inc.
Popular series of straight bevel gears for many uses. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Pressure Angle: 20°; 20 º
- Design: Metric
- Number of Teeth: 15
- PD: 0.59
from KHK USA, Inc.
Large nos. of teeth and modules are offered in these affordable spiral bevel gears. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Pressure Angle: 20°; 20 º
- Design: Metric
- Number of Teeth: 20
- PD: 0.79
from KHK USA, Inc.
Reasonably priced ground gear, yet remachinable except for the gear teeth. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Pressure Angle: 20°; 20 º
- Design: Metric
- Number of Teeth: 15
- Features: Ground Teeth
from KHK USA, Inc.
Popular series of straight bevel gears for many uses. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Pressure Angle: 20°; 20 º
- Design: Metric
- Number of Teeth: 15
- PD: 3.54
from KHK USA, Inc.
A spiral bevel gears with a helix angle less than 10 º. Receives forces from the same directions straight bevel gears receive and have excellent precision. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and... [See More]
- Pressure Angle: 20°; 20 º
- Design: Metric
- Number of Teeth: 20
- Features: Ground Teeth
from KHK USA, Inc.
Popular straight miter for many uses. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Pressure Angle: 20°; 20 º
- Design: Metric
- Number of Teeth: 20
- PD: 0.79
from W.M. Berg
Bevel Gears are used exclusively to transmit rotary motion between intersecting shafts. Through commonly seen in right angle drives, bevel gears can be cut to drive any angle. A cross section of the gear tooth reveals a profile similar to a spur gear. However, as the tooth is generated. the cross... [See More]
- Pressure Angle: 20°
- Bore Diameter: 0.2500
- PD: 0.62
- Material: Stainless
from Shenzhen Besta Precision Machinery Co., Ltd.
With extensive experience in the gear manufacturing industry, Besta is pleased to introduce our line of bevel and spiral bevel gears, working with materials including aluminum, ductile iron, and stainless steel. In addition, we can work with non-metals like nylon, plastic, and phenolic, Our size... [See More]
- Pressure Angle: 20°; 15°, 21.5° & 22.5°
- Tooth Form: Straight; Spiral
- Design: Metric
- Module: 1 - 15
from Martin Sprocket & Gear, Inc.
Bevel gear, 20 degree pressure angle, ratios range 1:1 to 6:1 [See More]
- Pressure Angle: 20°
- Design: English
- Number of Teeth: 30
- Gear Center: Center Bore
from Boston Gear
Overview. Boston Gear's stock miter and bevel gears are specifically designed for the efficient transmission of power and motion between intersecting shafts at a right angle (90 °). Miter gears are a special type of bevel gear designed to operate in pairs with identical numbers of teeth and... [See More]
- Pressure Angle: 20°
- Tooth Form: Straight (optional feature); Spiral (optional feature)
- Design: English
- Pitch: 48 to 4 DP
from QTC METRIC GEARS
Nissei Module 1.5, 20 Tooth Alloy Steel Left Hand Threaded Spiral Miter Gear with Finished Bore [See More]
- Pressure Angle: 20°
- Design: Metric
- Number of Teeth: 20
- PD: 30
from Shenzhen Besta Precision Machinery Co., Ltd.
With extensive experience in the gear manufacturing industry, Besta is pleased to introduce our line of bevel and spiral bevel gears, working with materials including aluminum, ductile iron, and stainless steel. In addition, we can work with non-metals like nylon, plastic, and phenolic, Our size... [See More]
- Pressure Angle: 20°; 15°, 21.5° & 22.5°
- Tooth Form: Straight; Spiral
- Design: Metric
- Module: 1 - 15
from Martin Sprocket & Gear, Inc.
Miter gears, 20 degree pressure angle, 1:1 ratio [See More]
- Pressure Angle: 20°
- Design: English
- Number of Teeth: 24
- Gear Center: Center Bore
from QTC METRIC GEARS
Module 1, 40 Tooth Nylon Bevel Gear [See More]
- Pressure Angle: 20°
- PD: 20
- Design: Metric
- Face Width: 6
from QTC METRIC GEARS
Module 0.8, 20 Tooth Sintered Metal Miter Gear [See More]
- Pressure Angle: 20°
- Design: Metric
- Number of Teeth: 20
- PD: 16