Coatings / Paint Fluid Dispensing Equipment
from Nordson EFD
Nordson EFD ’s unique MicroMark ™ spray marking systems eliminate clogging, maintenance, and downtime by using a programmable air delay after each cycle to clean the spray nozzle. Ideal for color coding, indicating pass/fail, or showing production or test status, our marking systems... [See More]
- Application: CoatingPaint; Inks
- Mounting: MachineMounted
- Dispensing Type: Spray Round
from Techcon
Techcon Systems bench-top dispensing robots are easy to program, simple to operate and compatible with all valve types and controllers. Designed and configured specifically for fluid dispensing applications, Techcon Systems robots provide total control over fluid placement, from beads, arcs and... [See More]
- Application: AdhesiveSilicone; CoatingPaint
- Dispensing Type: Dot; Bead; Fill ("potting")
- Dispensing Equipment Type: Dispense Only
- Mounting: Robotic
from Scheugenpflug, Inc.
The Dos P-A is the system of choice when large quantities have to be applied quickly. In this design, one cylinder pair is loaded while the other is discharged. This makes it possible to output large quantities of dispensing material within a very short amount of time. Filling time is no longer an... [See More]
- Application: AdhesiveSilicone; CleanRoomLab; CoatingPaint; HighViscosity; Insulation, Electronics, Automotive
- Dispensing Type: Fill ("potting")
- Dispensing Equipment Type: Mix And Dispense
- Mounting: MachineMounted
from Hapco, Inc.
MINIFIL ™ is a low cost, portable, two component dispensing machine specifically designed to dispense Hapco ’s products. It is reliable and easy to use. Stainless Steel Tanks. The MiniFIL ’s tanks are constructed of Stainless Steel. This makes them easier to clean and perfect to... [See More]
- Application: AdhesiveSilicone; CoatingPaint
- Container Size: 22712 to 45425
- Dispensing Equipment Type: Mix And Dispense
- Dispensing Type: Fill ("potting")
from Nordson Corporation
Touch screen control panel, easy troubleshooting, alarm equipped (1500psi) [See More]
- Application: CoatingPaint; Paint/Coating Spray Applications
- Dispense Rate: ? to 16.01
- Dispensing Equipment Type: Mix, Meter and Dispense
- Metering Accuracy: 1
from PVA - Precision Valve & Automation
The FC100 is a front closing dispense valve. Both have a dual acting air cylinder to provide immediate start and stop of fluid flow, while a stroke adjustment can be used to fine tune the fluid flow rate. For the spray valve, a precision air regulator and gauge assembly is provided to simultaneously... [See More]
- Application: AdhesiveSilicone; CoatingPaint; FoamGasket; MedPharmaceutical
- Dispensing Type: Bead; Spray Flat; Spray Round
- Dispensing Equipment Type: Dispense Only
- Mounting: HandHeld
from ViscoTec Pumpen- u. Dosiertechnik GmbH
The new eco-PEN450 precision-volume dosing unit made by ViscoTec covers many applications within the low to medium-viscosity dispensing range. The preeflow ® eco-PEN is a rotating, absolutely pressure-tight, positive displacement system with self-sealing rotor-stator arrangement. The controlled... [See More]
- Application: AdhesiveSilicone; ChemicalSolvent; CleanRoomLab; CoatingPaint; Colorants; Lubricants; Fats
- Dispense Rate: 5.00E-4 to 0.0060
- Dispensing Equipment Type: Dispense Only
- Metering Accuracy: 1
from Carlisle
Name: 98-3061 Pogo Plus Glue Outfit. Part Number: 98-3061. Gun: Model 2100. Pump: Pogo Plus Pump. Tank: no tank. Typical Application: Solvent based adhesives. Max Output Fluid Pressure: 2:1 200 psi - (Fluid Pressure range (0-300 psi (0-24.2 bar). Markets: Adhesive. General Industrial. Miscellaneous. [See More]
- Application: AdhesiveSilicone; ChemicalSolvent; CoatingPaint
- Dispensing Type: Spray Flat; Spray Round
- Dispensing Equipment Type: Dispense Only
- Dispensed From: CanPail
from Cammda Corporation
Designed specifically for aircraft exterior touch-ups, CAMMDA's Paint Pax ™ is a complete self contained system that stores, mixes and applies two-component paints and primers. Each Paint Pax ™ kit consists of a pre-filled two component cartridge, an applicator gun and a mixer. The... [See More]
- Application: CoatingPaint
- Dispensing Type: Bead
- Dispensing Equipment Type: Mix And Dispense
- Mounting: HandHeld
from Techcon
Techcon Systems bench-top dispensing robots are easy to program, simple to operate and compatible with all valve types and controllers. Designed and configured specifically for fluid dispensing applications, Techcon Systems robots provide total control over fluid placement, from beads, arcs and... [See More]
- Application: AdhesiveSilicone; CoatingPaint
- Dispensing Type: Dot; Bead; Fill ("potting")
- Dispensing Equipment Type: Dispense Only
- Mounting: Robotic
from Scheugenpflug, Inc.
The Scheugenpflug ProcessModule allows systems integrators and automation providers to leverage the benefits of the strictest processing technology standards in their production lines or cells. The system can be quickly and safely integrated into new or existing production lines or cells as easy as... [See More]
- Application: CoatingPaint; Potting, Sealing, Dam and Fill
- Dispensing Type: Fill ("potting")
- Dispensing Equipment Type: Dispense Only
from Hapco, Inc.
RAPIDFIL ™ C Series is a portable, LCD computer controlled, 2 component dispensing machine specifically designed to dispense Hapco's products. It is reliable and easy to use. Current Applications for RAPIDFIL ™ include: Liquid Molding - Plastic and rubber parts. Ideal for 1-10,000 parts. [See More]
- Application: AdhesiveSilicone; CoatingPaint
- Container Size: 22712 to 45425
- Dispensing Equipment Type: Mix And Dispense
- Dispensing Type: Fill ("potting")
from ViscoTec Pumpen- u. Dosiertechnik GmbH
The new eco-PEN600 precision-volume dosing unit made by ViscoTec. covers many applications within the low to medium-viscosity dispensing range. The preeflow ® eco-PEN is a rotating, absolutely pressure-tight, positive displacement system with self-sealing rotor-stator arrangement. The controlled... [See More]
- Application: AdhesiveSilicone; ChemicalSolvent; CleanRoomLab; CoatingPaint; Colorants; Lubricants; Fats
- Dispense Rate: 0.0014 to 0.0160
- Dispensing Equipment Type: Dispense Only
- Metering Accuracy: 1
from Carlisle
Name: B5-D Extreme Duty Cart Mt. Part Number: 109-1118. Gun: User Selects. Pump: B5-D Super Slave. Tank: Flush tank. Typical Application: Low to high production environments manufacturing wood cabinets, office, institutional, restaurant, bar furniture. Slave/Catalyst Ratio: .75 - 3.5. Flow(GPM) @... [See More]
- Application: CoatingPaint
- Dispensing Type: Spray Flat; Spray Round
- Dispensing Equipment Type: Mix, Meter and Dispense
- Mounting: Cart Mount
from Techcon
Techcon Systems bench-top dispensing robots are easy to program, simple to operate and compatible with all valve types and controllers. Designed and configured specifically for fluid dispensing applications, Techcon Systems robots provide total control over fluid placement, from beads, arcs and... [See More]
- Application: AdhesiveSilicone; CoatingPaint
- Dispensing Type: Dot; Bead; Fill ("potting")
- Dispensing Equipment Type: Dispense Only
- Mounting: Robotic
from Scheugenpflug, Inc.
The VDS B(asic) model is specifically suited for the bubble-free potting of large to extra large workpieces. The VDS B does not include axes, since in this case it is not necessary or not possible to move the workpieces. This in turn makes the vacuum chamber more easily scalable. Advantages. Higher... [See More]
- Application: CoatingPaint; Potting, Insulation, Vacuum Bonding
- Dispensing Type: Fill ("potting")
- Dispensing Equipment Type: Dispense Only
from Hapco, Inc.
RAPIDSHOT ™ is a low cost, handheld, two component dispensing system specifically designed to dispense Hapco ’s products. RAPIDSHOT ™ uses convenient disposable plastic cartridges and disposable RAPIDSHOT mixers. These cartridges are easily filled using the proprietary cartridge... [See More]
- Application: AdhesiveSilicone; CoatingPaint
- Container Size: 400
- Dispensing Equipment Type: Mix And Dispense
- Dispensing Type: Bead
from ViscoTec Pumpen- u. Dosiertechnik GmbH
The new and innovative precision-volume-dispenser eco-PEN700 made by ViscoTec. offers a wide range of applications for low to medium-viscosity dispensing. preeflow ® eco-PEN is a rotating and perfectly pressuretight displacement system. Self-sealing rotor/stator design. Conveyance action by... [See More]
- Application: AdhesiveSilicone; ChemicalSolvent; CleanRoomLab; CoatingPaint; Colorants; Lubricants; Fats
- Dispense Rate: 0.0053 to 0.0600
- Dispensing Equipment Type: Dispense Only
- Metering Accuracy: 1
from Carlisle
Name: B5-D Extreme Duty Wall Mt. Part Number: 109-1116. Gun: User Selects. Pump: B5-D Super Slave. Tank: Flush tank. Typical Application: Low to high production environments manufacturing wood cabinets, office, institutional, restaurant, bar furniture. Slave/Catalyst Ratio: .75 - 3.5. Flow(GPM) @... [See More]
- Application: CoatingPaint
- Dispensing Type: Spray Flat; Spray Round
- Dispensing Equipment Type: Mix, Meter and Dispense
- Mounting: MachineMounted
from Scheugenpflug, Inc.
Time can be a limiting factor for many reasons. This problem can be easily overcome with the VDS P(ower) vacuum dispensing system, which is usually equipped with three motion axes, an automatic cup position and a multi-piston dispenser (2 to 8 nozzles, depending on required performance; other sizes... [See More]
- Application: CoatingPaint; Potting, Insulation, Vacuum Bonding
- Dispensing Type: Fill ("potting")
- Dispensing Equipment Type: Dispense Only
from Carlisle
Name: Comet 3C Cart Mt. Part Number: 109-1117. Gun: User Selects. Pump: Comet 3C. Tank: Flush tank. Typical Application: Low to high production environments manufacturing wood cabinets, office, institutional, restaurant, bar furniture. Slave/Catalyst Ratio: 1.0 - 7.0 in .25% increments. Max Output... [See More]
- Application: CoatingPaint
- Dispensing Type: Spray Flat; Spray Round
- Dispensing Equipment Type: Mix, Meter and Dispense
- Mounting: Cart Mount
from Scheugenpflug, Inc.
In electronics manufacturing, flexibility is the domain of universal systems, which allow a quick reaction to product changes. The Universal vacuum dispensing system, which usually features three motion axes and an automatic cup position, is the ideal solution for volume production of medium-sized... [See More]
- Application: CoatingPaint; Potting, Insulation, Vacuum Bonding
- Dispensing Type: Fill ("potting")
- Dispensing Equipment Type: Dispense Only
from Carlisle
Name: Comet 3C Wall Mt. Part Number: 109-1115. Gun: User Selects. Pump: Comet 3C. Tank: Flush tank. Typical Application: Low to high production environments manufacturing wood cabinets, office, institutional, restaurant, bar furniture. Slave/Catalyst Ratio: 1.0 - 7.0 in .25% increments. Max Output... [See More]
- Application: CoatingPaint
- Dispensing Type: Spray Flat; Spray Round
- Dispensing Equipment Type: Mix, Meter and Dispense
- Mounting: MachineMounted
from Scheugenpflug, Inc.
The Dos P016 / 050 / 100 / 300 / TCA piston dispensers are high-precision volumetric dispensers designed to process 1C and 2C materials and cover a wide range of applications. Precisely dimensioned dispensing cylinders provide the ability to obtain reproducible material volumes. When 2C materials... [See More]
- Application: AdhesiveSilicone; CleanRoomLab; CoatingPaint; HighViscosity; Electronics, Automotive, Household Appliances
- Shot Size: 35 to 318
- Dispensing Equipment Type: Mix And Dispense
- Dispensing Type: Fill ("potting")
from Carlisle
Name: 98-3050 3B cart outfit with gun. Part Number: 98-3050. Gun: AA 1500. Pump: Comet 3B. Tank: no tank. Typical Application: Wood Cabinets, Metal fabrication, Wood doors and windows, General maintenance, Wood furniture, Custom wood shops. Max Output Fluid Pressure: 1500 psi (21.7 bar). Markets:... [See More]
- Application: CoatingPaint
- Dispensing Type: Spray Flat; Spray Round
- Dispensing Equipment Type: Dispense Only
- Mounting: Cart Mount