Gun Handle Fluid Dispensing Equipment
from ThermOmegaTech®
Product Description. The HCX (Hot/Cold Water Mixing) Station combines simplicity and cost effectiveness with the reliability and safety inherent in all ThermOmegaTech ® washdown stations. The HCX station uses individual globe valves to mix hot and cold water to the desired proportion with the... [See More]
- Dispensed From: GunHandle
- Application: Cleaners; FoodBeverage; Water
- Dispensing Equipment Type: Mix And Dispense; Mix, Meter and Dispense (optional feature)
- Dispense Rate: 65.15
from RS Components, Ltd.
Grease Gun, 40 Mpa, 380mm Length, 1.5 kg [See More]
- Dispensed From: GlueStick; GunHandle
- Application: Lubricants
from ThermOmegaTech®
Product Description. The ThermOmegaTech ® HCS Single Channel Washdown Station provides convenient delivery of a single stream of hot or cold water for washdown applications. A quarter turn ball valve provides simple, yet effective control, while the integrated temperature gauge gives... [See More]
- Dispensed From: GunHandle
- Application: Cleaners; FoodBeverage; Water
- Dispensing Equipment Type: Dispense Only
- Dispense Rate: 65.15
from RS Components, Ltd.
Hand Operated Grease Gun, 30 Mpa, 1.5 kg [See More]
- Dispensed From: GlueStick; GunHandle
- Application: Lubricants
from ThermOmegaTech®
Product Description. The STVM ® Washdown Station has been designed to put the safety of your operators first, thanks to its innovative technology. The system utilizes a thermal element located in the downstream leg of the mixing valve. The thermal element is designed to throttle steam flow... [See More]
- Dispensed From: GunHandle
- Application: Cleaners; FoodBeverage; Water
- Dispensing Equipment Type: Mix And Dispense; Mix, Meter and Dispense
- Dispense Rate: 65.15
from RS Components, Ltd.
Grease Gun TLGH1, 40MPa Max [See More]
- Dispensed From: GlueStick; GunHandle
- Application: Lubricants
from RS Components, Ltd.
LEVER GREASE GUN, 450GR [See More]
- Dispensed From: GlueStick; GunHandle
- Application: Lubricants
from RS Components, Ltd.
POMPE A GRAISSE [See More]
- Dispensed From: GlueStick; GunHandle
- Application: Lubricants
from RS Components, Ltd.
PISTOLET A GRAISSE [See More]
- Dispensed From: GlueStick; GunHandle
- Application: Lubricants
from RS Components, Ltd.
SERINGUE A HUILE [See More]
- Dispensed From: GlueStick; GunHandle
- Application: Lubricants
from RS Components, Ltd.
SERINGUE [See More]
- Dispensed From: GlueStick; GunHandle
- Application: Lubricants
from NETZSCH Pumps North America, LLC
Nearly shear free conveyance & dosing of highly viscous & abrasive products [See More]
- Dispensed From: GunHandle
- Application: AdhesiveSilicone; HighViscosity; Low to Very High Viscosity
- Dispensing Equipment Type: Dispense Only
- Metering Accuracy: 1
from Nordson EFD
The original BaitGun System is the preferred choice for the application of paste and gel baits. The BaitGun provides total application control in both for precise deposits and crack and crevice fill. The original BaitGun gives you total application control of all paste and gel baits. A high-leverage... [See More]
- Dispensed From: GunHandle
- Application: AdhesiveSilicone; Paste and Gel
- Dispensing Equipment Type: Dispense Only
- Dispensing Type: Dot; Bead
from Gardner Denver, Inc.
Fueling Systems. Fast, spill-free, automatic shut-off fueling systems have been developed for transit buses, mining and other off-highway vehicles, gantry cranes, and locomotives. In addition, over-wing fueling solutions have been developed for general and military aviation including small aircraft... [See More]
- Dispensed From: GunHandle
- Application: FuelOil
- Dispensing Equipment Type: Dispense Only
from Macnaught USA, Inc.
PN# BP-10FT: 10FT of 1/2 ” HOSE with ON Demand Nozzle – up to 1.5+ GPM. Use with 5 gallon ( BOP20HV ) or 16 and 55 Gallon ( BOP60HV ) for Coolant only. INCLUDES 2 YEAR WARRANTY!. Macnaught BP-10FT Specifications Description BOP Hose with Nozzle – use only with BOP Pumps. Drum size... [See More]
- Dispensed From: CanPail; GunHandle
- Application: Coolant
- Dispensing Equipment Type: Dispense Only
- Dispense Rate: 5.68
from FSI
If you ’re looking for a simple, easy-to-use, cost-effective way to apply closed cell foam insulation, the Spritzer dispensing unit from Foam Supplies is the perfect solution. Used in conjunction with our froth-based systems, the Spritzer unit is useful for a wide variety of manufacturing and... [See More]
- Dispensed From: GunHandle
- Dispensing Type: Fill ("potting")
- Application: AdhesiveSilicone; FoamGasket
- Mounting: HandHeld
from DME Company
Pistol Type Pneumatic Grease Gun. Compact trigger-release design for easy reach in to recessed and hard-to-reach fittings. Three way loading for versatility: o Standard 14-oz cartridge (not included). o Load with a pressure filler. o Bulk load. 24 inch flexible hose for extended working reach. 1/4... [See More]
- Dispensed From: Barrel / Syringe; GunHandle
- Container Size: 414
- Dispensing Equipment Type: Dispense Only
- Dispensing Type: Solid Stream
from Techsil Limited
The gas-tec ™ 600 is a robust, compact hot melt glue gun that runs on butane gas. No mains electricity or batteries are required. The tool is powered by LEC ™ (liquid energy cell) technology; the LEC ™ canisters can be refilled using good quality butane gas in approx. 15 seconds... [See More]
- Dispensed From: GunHandle
- Dispensing Equipment Type: Hot Melt / Dispense
from Hapco, Inc.
RAPIDSHOT ™ is a low cost, handheld, two component dispensing system specifically designed to dispense Hapco ’s products. RAPIDSHOT ™ uses convenient disposable plastic cartridges and disposable RAPIDSHOT mixers. These cartridges are easily filled using the proprietary cartridge... [See More]
- Dispensed From: GunHandle
- Application: AdhesiveSilicone; CoatingPaint
- Dispensing Equipment Type: Mix And Dispense
- Container Size: 400
from Macnaught USA, Inc.
The kit has everything needed to pump Coolant. Powerhead, Stem with 5ft of 1/2 ″ hose with On Demand Nozzle, 18V Li-Ion Battery, Battery Charger, 2 Pail Adapters. Designed for 5 Gallon Coolant containers. No need to use cumbersome and difficult to dispense hand pumps or funnels. Place the... [See More]
- Dispensed From: CanPail; GunHandle
- Application: FuelOil; HighViscosity; Lubricants
- Dispensing Equipment Type: Dispense Only
- Dispense Rate: 5.68
from FSI
Our patented Solvent-Less Urethane Gun – SLUG, for short – was designed, engineered and machined to give our customers a reliable, cost-effective, easy-to-use way to mix and dispense “pour and froth ” urethane foam systems for a wide range of applications, across any number... [See More]
- Dispensed From: GunHandle
- Application: AdhesiveSilicone; FoamGasket
- Dispensing Equipment Type: Mix And Dispense
- Dispensing Type: Fill ("potting")
from Techsil Limited
The tec ™ 305 12 is a low cost, lightweight medium sized hot melt glue gun designed to take 12mm glue sticks. This tool incorporates a self-regulating PTC heater which handles voltages from 110v up to 230v. Fitted with a standard UK plug. Suitable for light industrial use. Glue Gun... [See More]
- Dispensed From: GunHandle
- Application: AdhesiveSilicone
- Dispensing Equipment Type: Hot Melt / Dispense
from Macnaught USA, Inc.
This 5 Gallon Bucket Oil Dispenser Pump kit has everything needed to pump oil. Powerhead, Stem with 5ft of 3/4 hose with On Demand Nozzle, 18V Li-Ion Battery, Battery Charger, 1 Pail Adapter. Designed for 5 Gallon Oil Pails up to 140W. No need to use cumbersome and difficult to dispense hand pumps... [See More]
- Dispensed From: CanPail; GunHandle
- Application: FuelOil; HighViscosity; Lubricants
- Dispensing Equipment Type: Dispense Only
- Dispense Rate: 5.68
from Techsil Limited
The tec ™ 3400 from Power Adhesives is a high output 43mm hotmelt glue with a much lower energy consumption than its competitors. This heavy duty industrial gun features a digital controller that maintains the tool temperature and responds faster to demands. This reduces the efforts required... [See More]
- Dispensed From: GunHandle
- Application: AdhesiveSilicone
- Dispensing Equipment Type: Hot Melt / Dispense
from Macnaught USA, Inc.
The kit has everything needed to pump Coolant. Powerhead, Stem with 5ft of 1/2 ″ hose with On Demand Nozzle, 18V Li-Ion Battery & Battery Charger. Designed for 16, 55 Gallon Coolant drums. No need to use cumbersome and difficult to dispense hand pumps or funnels. Place the BOPHV into any... [See More]
- Dispensed From: CanPail; GunHandle
- Application: FuelOil; Lubricants
- Dispensing Equipment Type: Dispense Only
- Dispense Rate: 5.68
from Techsil Limited
The tec ™ 4500B is a highly versatile tool that features a unique built-in melt chamber that allows the use of adhesive in granular form, pillows or slugs. This reliable and easy to use glue gun offers great user-comfort thanks to its ergonomic design and ensures effortless and lightweight... [See More]
- Dispensed From: GunHandle
- Application: AdhesiveSilicone
- Dispensing Equipment Type: Hot Melt / Dispense
from Macnaught USA, Inc.
This 16, 55 Gallon Oil Dispenser Pump kit has everything needed to pump oil. Powerhead, Stem with 5ft of 3/4 hose with On Demand Nozzle, Stem Extender, 18V Li-Ion Battery & Battery Charger. Designed for 16 Gallon or 55 Gallon Drums up to 140W. Place the BOPHV into any 16 or 55 gallon oil drum,... [See More]
- Dispensed From: CanPail; GunHandle
- Application: FuelOil; Lubricants
- Dispensing Equipment Type: Dispense Only
- Dispense Rate: 5.68
from Techsil Limited
The tec ™ 4500S is a highly versatile tool that features a unique built-in melt chamber that allows the use of adhesive in granular form, pillows or slugs. This reliable and easy to use glue gun offers great user-comfort thanks to its ergonomic design and ensures effortless and lightweight... [See More]
- Dispensed From: GunHandle
- Application: AdhesiveSilicone
- Dispensing Equipment Type: Hot Melt / Dispense
from Macnaught USA, Inc.
Macnaught Digital Inline Meter for all BOP Products. Registers in Gallons, Quarts, and Liters. Works with 140W / ISO680 oils, Coolant and ATF. Flowrate up to 2.7 GPM. Installs Easily within minutes on any BOP Dispensing Nozzle. INCLUDES 2 YEAR WARRANTY!. Macnaught Digital Inline Meter Specifications... [See More]
- Dispensed From: CanPail; GunHandle
- Application: FuelOil
- Dispensing Equipment Type: Dispense Only
- Dispense Rate: 10.23
from Techsil Limited
The tec ™ 6100BMK is a Bench Mount Kit designed for use with the tec ™ 6100. [See More]
- Dispensed From: GunHandle
- Dispensing Equipment Type: Hot Melt / Dispense
from Macnaught USA, Inc.
PN# BP-HV10FT: 10FT of ¾ ” HOSE with ON Demand Nozzle – up to 1.5+ GPM. Use with 5 gallon ( BOP20HV ) or 16 and 55 Gallon ( BOP60HV ). Macnaught BPHV-10FT Specifications. Description BOP Hose with Nozzle – use only with BOP Pumps. Drum size Use with 5 gallon ( BOP20 ) or 16... [See More]
- Dispensed From: CanPail; GunHandle
- Application: FuelOil
- Dispensing Equipment Type: Dispense Only
- Dispense Rate: 5.68
from Techsil Limited
The tec ™ 805 12 is a low cost, robust, medium sized hot melt glue gun designed to take 12mm glue sticks. It boasts an eco heater chamber design with low power consumption. This tool incorporates a self-regulating PTC heater which handles voltages from 110v up to 230v. Fitted with a standard... [See More]
- Dispensed From: GunHandle
- Application: AdhesiveSilicone
- Dispensing Equipment Type: Hot Melt / Dispense
from Macnaught USA, Inc.
Metered Oil Control Gun, Black shroud, flexible ext., trigger guard, locking trigger, non-drip auto nozzle, 1/2 ″NPT inlet, & LCD with Batch & Total. Macnaught offers the HG55F-02 Electronic oil control gun with flexible extension. Features include, locking trigger and non-drip nozzle,... [See More]
- Dispensed From: GunHandle
- Application: FuelOil
- Dispensing Equipment Type: Dispense Only
- Dispense Rate: 0.9848 to 30.3
from Techsil Limited
The tec ™ 805 15 is a low cost, robust, medium sized hot melt glue gun designed to take 15mm glue sticks. It boasts an eco heater chamber design with low power consumption. This tool incorporates a self-regulating PTC heater which handles voltages from 110v up to 230v. Fitted with a standard... [See More]
- Dispensed From: GunHandle
- Application: AdhesiveSilicone
- Dispensing Equipment Type: Hot Melt / Dispense