Plastic End Mills
from Melin Tool Company
Due to the sinusoidal form on cutting edge, small chips are produced which allow faster feed rates then conventional end mills. A rough finish is produced which will require a finishing pass. Designed to machine soft materials such as aluminum, plastic, zinc alloys. Wide futes provide rapid chip... [See More]
- Cutting Application: Aluminum; Plastic
- Cutting Ends: Single
- Geometry: Square
- Units: Fractional
from KEO Cutters
3- and 4-Flute Long Shank [See More]
- Cutting Application: General Purpose; Aluminum; Plastic; Graphite, Composites
- Cutting Ends: Single
- Geometry: Square (optional feature); Ballnose (optional feature)
- Units: Fractional
from Cutting Edge Technologies, Inc.
Coating: Uncoated. Diameter: 1/32". End Type: Square. Flute Length: 3/32". Flute Length Type: Standard. Number of Flutes: Overall Length: 1 1/2". Shank Diameter: 1/8". Substrate Material: Carbide. Type: End Mill [See More]
- Cutting Application: General Purpose; Aluminum; Bronze/Brass; Ceramic; Plastic
- Cutting Ends: Single
- Geometry: Square
- Units: Fractional
from SwiftCARB
Regular length ballnose end mill, left hand and metric available [See More]
- Cutting Application: General Purpose; Aluminum; Plastic; Stainless; Steel; Titanium; Wood
- Cutting Ends: Single
- Geometry: Ballnose
- Units: Fractional; Metric (optional feature)
from Melin Tool Company
Due to the finer sinusoidal form on cutting edge, finer chips are produced than coarse pitch, which are easier flushed away and reduce re-cutting and packing. A rough finish is produced which will require finishing pass. Designed to machine soft materials such as aluminum, plastic, zinc alloys. Wide... [See More]
- Cutting Application: Aluminum; Plastic
- Cutting Ends: Single
- Geometry: Square
- Units: Fractional
from KEO Cutters
3-Flute Long Reach Single-End High Performance [See More]
- Cutting Application: General Purpose; Aluminum; Plastic; Graphite, Composites
- Cutting Ends: Single
- Geometry: Square (optional feature); Ballnose (optional feature)
- Units: Fractional
from Cutting Edge Technologies, Inc.
Coating: Uncoated. Diameter: 1/32". End Type: Ball. Flute Length: 3/32". Flute Length Type: Standard. Number of Flutes: Overall Length: 1 1/2". Shank Diameter: 1/8". Substrate Material: Carbide. Type: End Mill [See More]
- Cutting Application: General Purpose; Aluminum; Bronze/Brass; Ceramic; Plastic
- Cutting Ends: Single
- Geometry: Ballnose
- Units: Fractional
from Melin Tool Company
For plastic and composite materials. Unique rake and clearance angles for fast removal rates. Polished single flute design. Made from premium submicron grain carbide. [See More]
- Cutting Application: Plastic
- Units: Fractional
- Cutting Ends: Single
- Cutter: 0.062 to 0.500
from KEO Cutters
3-Flute Stub/Long Reach/Long Shank [See More]
- Cutting Application: General Purpose; Aluminum; Plastic; Graphite, Composites
- Cutting Ends: Single
- Geometry: Square (optional feature); Ballnose (optional feature)
- Units: Fractional
from Cutting Edge Technologies, Inc.
Coating: TIN. Diameter: 1/32". End Type: Ball. Flute Length: 3/32". Flute Length Type: Standard. Number of Flutes: Overall Length: 1 1/2". Shank Diameter: 1/8". Substrate Material: Carbide. Type: End Mill [See More]
- Cutting Application: General Purpose; Aluminum; Bronze/Brass; Ceramic; Plastic
- Cutting Ends: Single
- Geometry: Ballnose
- Units: Fractional
from Cutting Edge Technologies, Inc.
Coating: TiALN. Diameter: 1/32". End Type: Ball. Flute Length: 3/32". Flute Length Type: Standard. Number of Flutes: Overall Length: 1 1/2". Shank Diameter: 1/8". Type: End Mill [See More]
- Cutting Application: General Purpose; Aluminum; Bronze/Brass; Ceramic; Plastic
- Cutting Ends: Single
- Geometry: Ballnose
- Units: Fractional
from Cutting Edge Technologies, Inc.
Coating: TiALN. Diameter: 1/32". End Type: Square. Flute Length: 3/32". Flute Length Type: Standard. Number of Flutes: Overall Length: 1 1/2". Shank Diameter: 1/8". Type: End Mill [See More]
- Cutting Application: General Purpose; Aluminum; Bronze/Brass; Ceramic; Plastic
- Cutting Ends: Single
- Geometry: Square
- Units: Fractional
from Cutting Edge Technologies, Inc.
Coating: TIN. Diameter: 1/32". End Type: Square. Flute Length: 3/32". Flute Length Type: Standard. Number of Flutes: Overall Length: 1 1/2". Shank Diameter: 1/8". Substrate Material: Carbide. Type: End Mill [See More]
- Cutting Application: General Purpose; Aluminum; Bronze/Brass; Ceramic; Plastic
- Cutting Ends: Single
- Geometry: Square
- Units: Fractional