Carbide End Mills
from RS Components, Ltd.
CARBIDE 4FL E-MILL 5.0MM [See More]
- Material: Carbide; Solid Carbide
- Shank: 0.236
- Cutter: 0.197
- OAL: 1.97
from RS Components, Ltd.
CARBIDE 4FL E-MILL 6.0MM [See More]
- Material: Carbide; Solid Carbide
- Shank: 0.236
- Cutter: 0.236
- OAL: 2.28
from RS Components, Ltd.
CARBIDE 4FL E-MILL 8.0MM [See More]
- Material: Carbide; Solid Carbide
- Shank: 0.315
- Cutter: 0.315
- OAL: 2.48
from RS Components, Ltd.
CARBIDE 4FL E-MILL 10.0MM [See More]
- Material: Carbide; Solid Carbide
- Shank: 0.394
- Cutter: 0.394
- OAL: 2.95
from RS Components, Ltd.
CARBIDE 4FL E-MILL 12.0MM [See More]
- Material: Carbide; Solid Carbide
- Shank: 0.472
- Cutter: 0.472
- OAL: 2.95
from RS Components, Ltd.
CARBIDE 4FL E-MILL 16.0MM [See More]
- Material: Carbide; Solid Carbide
- Shank: 0.630
- Cutter: 0.630
- OAL: 3.50
from RS Components, Ltd.
CARBIDE 4FL E-MILL1.0MM [See More]
- Material: Carbide; Solid Carbide
- Shank: 0.118
- Cutter: 0.039
- OAL: 1.50
from RS Components, Ltd.
CARBIDE 4FL E-MILL 2.0MM [See More]
- Material: Carbide; Solid Carbide
- Shank: 0.118
- Cutter: 0.079
- OAL: 1.50
from RS Components, Ltd.
CARBIDE 4FL E-MILL 3.0MM [See More]
- Material: Carbide; Solid Carbide
- Shank: 0.118
- Cutter: 0.118
- OAL: 1.50
from RS Components, Ltd.
CARBIDE 4FL E-MILL 4.0MM [See More]
- Material: Carbide; Solid Carbide
- Shank: 0.157
- Cutter: 0.157
- OAL: 1.97
from RS Components, Ltd.
CARBIDE TIALN 3 FL S/DRILL 2.0MM [See More]
- Material: Carbide; Solid Carbide
- Shank: 0.118
- Cutter: 0.079
- OAL: 1.50
from RS Components, Ltd.
S9334.0 CARBIDE TIALN 3 Fl S/Drill [See More]
- Material: Carbide; Solid Carbide
- Shank: 0.157
- Cutter: 0.157
- OAL: 1.97
from RS Components, Ltd.
S9335.0 CARBIDE TIALN 3 Fl S/Drill [See More]
- Material: Carbide; Solid Carbide
- Shank: 0.197
- Cutter: 0.197
- OAL: 1.97
from RS Components, Ltd.
S9336.0 CARBIDE TIALN 3 Fl S/Drill [See More]
- Material: Carbide; Solid Carbide
- Shank: 0.236
- Cutter: 0.236
- OAL: 2.24
from RS Components, Ltd.
S9338.0 CARBIDE TIALN 3 Fl S/Drill [See More]
- Material: Carbide; Solid Carbide
- Shank: 0.315
- Cutter: 0.315
- OAL: 2.48
from RS Components, Ltd.
S93310.0 CARBIDE TIALN 3 Fl S/Drill [See More]
- Material: Carbide; Solid Carbide
- Shank: 0.394
- Cutter: 0.394
- OAL: 2.83
from RS Components, Ltd.
S93312.0 CARBIDE TIALN 3 Fl S/Drill [See More]
- Material: Carbide; Solid Carbide
- Shank: 0.472
- Cutter: 0.472
- OAL: 2.87
from RS Components, Ltd.
S93316.0 CARBIDE TIALN 3 Fl S/Drill [See More]
- Material: Carbide; Solid Carbide
- Shank: 0.630
- Cutter: 0.630
- OAL: 3.62
from RS Components, Ltd.
S9443.0 CARBIDE TIALN END MILL [See More]
- Material: Carbide; Solid Carbide
- Shank: 0.118
- Cutter: 0.118
- OAL: 1.50
from RS Components, Ltd.
S9444.0 CARBIDE TIALN END MILL [See More]
- Material: Carbide; Solid Carbide
- Shank: 0.157
- Cutter: 0.157
- OAL: 1.97
from RS Components, Ltd.
S9445.0 CARBIDE TIALN END MILL [See More]
- Material: Carbide; Solid Carbide
- Shank: 0.197
- Cutter: 0.197
- OAL: 1.97
from RS Components, Ltd.
S9446.0 CARBIDE TIALN END MILL [See More]
- Material: Carbide; Solid Carbide
- Shank: 0.236
- Cutter: 0.236
- OAL: 2.24
from RS Components, Ltd.
S9448.0 CARBIDE TIALN END MILL [See More]
- Material: Carbide; Solid Carbide
- Shank: 0.315
- Cutter: 0.315
- OAL: 2.48
from RS Components, Ltd.
S94412.0 CARBIDE TIALN END MILL [See More]
- Material: Carbide; Solid Carbide
- Shank: 0.472
- Cutter: 0.472
- OAL: 2.87
from RS Components, Ltd.
S94416.0 CARBIDE TIALN END MILL [See More]
- Material: Carbide; Solid Carbide
- Shank: 0.630
- Cutter: 0.630
- OAL: 3.62
from Gesswein Co., Inc.
Stay sharper, leave a better finish and have less chipping and breakage. Sub-micron size grain contains more cobalt than standard carbide tools, giving 70% greater strength. Can last up to 5 times longer than standard carbide tools. Superior performance and wear resistance make these blanks and... [See More]
- Material: Carbide
- Cutter: 0.125
- Cutting Ends: Single
- OAL: 1.50
from Superior Tool Service, Inc.
Designed for hi speed machining of aluminum. Available with 2 or 3 flutes, variable helix, variable spiral. We recommend a special Diamondlike carbon coating for the best results. Available uncoated too. Order with no radius, radius or ball radius. Designed for Composite Material Applications. [See More]
- Material: Carbide
- Cutting Ends: Single
- Geometry: Ballnose (optional feature); Radius (optional feature)
- Units: Fractional
from Sandvik AB
. SQUARE TYPE. SOLID CARBIDE MATERIAL. 1-1/2 INCH OVERALL LENGTH. 3/16 INCH FLUTE LENGTH. STRAIGHT SHANK TYPE. 1/8 INCH SHANK SIZE. RIGHT HAND DIRECTION OF CUT. 2 FLUTE(S). SPIRAL FLUTE TYPE. 1/16 INCH CUTTER DIAMETER. 1/16 CUTTER DIAMETER - FRACTIONAL. .0625 CUTTER DIAMETER - DECIMAL. PRECISION... [See More]
- Material: Carbide
- Units: Fractional
- Geometry: Square
- Cutter: 0.062
from KEO Cutters
Carbide Decimal 2-Flute Single-End Ball Nose Regular [See More]
- Material: Carbide
- Cutting Ends: Single
- Geometry: Ballnose
- Units: Fractional
from Contour360º
Designed specifically for aluminum and non-ferrous materials. Reduce cycle time - one tool for roughing and finishing. Promotes dynamic chip flow at high velocity. [See More]
- Material: Carbide
- Cutting Ends: Single
- Geometry: Square
- Units: Fractional
from Universal Cutting Tools, Inc.
2-Flute Single End Solid Carbide End Mill - Regular Length - Uncoated * 10% Cobalt * Micro Grain [See More]
- Material: Carbide
- Units: Fractional
- Cutting Ends: Single
- Cutter: 1.000
from SCT - Scientific Cutting Tools, Inc.
Corner Rounding End Mills have three flutes and are double ended to provide maximum value. The cutter diameter and the cut depth are held to ±0.001 inch tolerance to provide ease of set-up. [See More]
- Material: Carbide
- Units: Fractional
- Cutting Ends: Single
- Shank: 0.125 to 5.000
from Cutting Edge Technologies, Inc.
Diameter: 0.005". End Type: Ball. Flute Length: 3 X DIA. Number of Flutes: Overall Length: 1 1/2". Shank Diameter: 1/8". Substrate Material: Carbide. Tolerance: +/- .0005". Type: End Mill [See More]
- Material: Carbide
- Cutting Ends: Single
- Geometry: Ballnose
- Units: Fractional
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . 1-1/2 in Standard Length Uncoated coated Carbide end mill. [See More]
- Material: Carbide
- Cutter: 0.110
- Geometry: Ballnose
- Shank: 0.125
from Melin Tool Company
Family owned and operated since 1940, Melin Tool began as one of the early manufacturers of end mills. Today, Melin Tool continues to be a leader in offering an ever-expanding product line of our high quality end mills and other cutting tools such as our new countersinks, drills, thread mills, and... [See More]
- Material: Micrograin; Carbide
- Cutting Ends: Single
- Geometry: Square
- Units: Fractional
from SwiftCARB
Weldon shank, ball end cutter [See More]
- Material: Carbide
- Cutting Ends: Single
- Geometry: Ballnose
- Units: Fractional
from Sandvik Coromant Co.
In our comprehensive range of CoroMill ® Plura mills, you will find the best option for your application, whether you need a tool that is optimized for a specific material or one that performs well in many materials. The range of tools includes high-performance solutions for high-speed... [See More]
- Material: Carbide
- Cutting Ends: Single
- Geometry: Square (optional feature); Ballnose (optional feature); Radius (optional feature)
- Units: Fractional (optional feature); Metric
from Gesswein Co., Inc.
Stay sharper, leave a better finish and have less chipping and breakage. Sub-micron size grain contains more cobalt than standard carbide tools, giving 70% greater strength. Can last up to 5 times longer than standard carbide tools. Superior performance and wear resistance make these blanks and... [See More]
- Material: Carbide
- OAL: 1.50
- Cutter: 0.125
- Edges: Solid
from Superior Tool Service, Inc.
A 4 flute design with a variable helix- variable spiral for chatter free milling. Our design helps with dampening out harmonics, letting you excel in difficult to machine materials and applications. This is a great cutter for hard steel, alloy steels, cast irons, stainless steels and nickel alloys. [See More]
- Material: Carbide
- Cutting Ends: Single
- Geometry: Ballnose (optional feature); Radius (optional feature)
- Units: Fractional
from Sandvik AB
. SQUARE TYPE. SOLID CARBIDE MATERIAL. 1-1/2 INCH OVERALL LENGTH. 3/16 INCH FLUTE LENGTH. STRAIGHT SHANK TYPE. 1/8 INCH SHANK SIZE. RIGHT HAND DIRECTION OF CUT. 3 FLUTE(S). SPIRAL FLUTE TYPE. 1/16 INCH CUTTER DIAMETER. 1/16 CUTTER DIAMETER - FRACTIONAL. .0625 CUTTER DIAMETER - DECIMAL. PRECISION... [See More]
- Material: Carbide
- Units: Fractional
- Geometry: Square
- Cutter: 0.062
from KEO Cutters
Carbide Decimal 2-Flute Single-End Ball Nose Stub [See More]
- Material: Carbide
- Cutting Ends: Single
- Geometry: Ballnose
- Units: Fractional
from Contour360º
2 and 4 Flute, 30 Degree Helix, Center Cutting. Solid Carbide End Mills. [See More]
- Material: Carbide
- Cutting Ends: Single
- Geometry: Square
- Units: Fractional
from Universal Cutting Tools, Inc.
2-Flute Single End Solid Carbide End Mill - Ball Nose - Regular Length - Uncoated * 10% Cobalt * Micro Grain [See More]
- Material: Carbide
- Units: Fractional
- Cutting Ends: Single
- Cutter: 1.000
from Cutting Edge Technologies, Inc.
Diameter: 0.010". End Type: Square. Flute Length: 3 X DIA. Flute Length Type: Standard. Number of Flutes: Overall Length: 1 1/2". Shank Diameter: 1/8". Substrate Material: Carbide. Tolerance: +/- .0005". Type: End Mill [See More]
- Material: Carbide
- Cutting Ends: Single
- Geometry: Square
- Units: Fractional
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . 3-1/4 in Standard Length Uncoated coated Carbide end mill. [See More]
- Material: Carbide
- Cutter: 0.079
- Geometry: Ballnose
- Shank: 0.125
from Melin Tool Company
Family owned and operated since 1940, Melin Tool began as one of the early manufacturers of end mills. Today, Melin Tool continues to be a leader in offering an ever-expanding product line of our high quality end mills and other cutting tools such as our new countersinks, drills, thread mills, and... [See More]
- Material: Micrograin; Carbide
- Cutting Ends: Single
- Geometry: Chamfer
- Units: Fractional
from Gesswein Co., Inc.
Stay sharper, leave a better finish and have less chipping and breakage. Sub-micron size grain contains more cobalt than standard carbide tools, giving 70% greater strength. Can last up to 5 times longer than standard carbide tools. Superior performance and wear resistance make these blanks and... [See More]
- Material: Carbide
- Cutter: 0.125
- Cutting Ends: Double
- OAL: 1.50
from Superior Tool Service, Inc.
A 6 flute end mill designed to cut titanium, heat treated steel and stainless steel. It has a variable helix and variable spiral design for dampening out harmonics. Available coated (TiAlN) or uncoated. Also available: no radius, radius (or chamfer) or ball radius. Designed for Composite Material... [See More]
- Material: Carbide
- Cutting Ends: Single
- Geometry: Ballnose (optional feature); Radius (optional feature)
- Units: Fractional
from Sandvik AB
. SQUARE TYPE. SOLID CARBIDE MATERIAL. 1-1/2 INCH OVERALL LENGTH. 3/16 INCH FLUTE LENGTH. STRAIGHT SHANK TYPE. 1/8 INCH SHANK SIZE. RIGHT HAND DIRECTION OF CUT. 4 FLUTE(S). SPIRAL FLUTE TYPE. 1/16 INCH CUTTER DIAMETER. 1/16 CUTTER DIAMETER - FRACTIONAL. .0625 CUTTER DIAMETER - DECIMAL. PRECISION... [See More]
- Material: Carbide
- Units: Fractional
- Geometry: Square
- Cutter: 0.062
from KEO Cutters
Carbide Decimal 2-Flute Single-End Regular [See More]
- Material: Carbide
- Cutting Ends: Single
- Geometry: Square
- Units: Fractional
from Contour360º
4 Flute, 30 Degree Helix, Center Cutting. Solid Carbide End Mills. [See More]
- Material: Carbide
- Cutting Ends: Single
- Geometry: Square
- Units: Fractional
from Universal Cutting Tools, Inc.
2-Flute Single End Solid Carbide End Mill - Long Length - Uncoated * 10% Cobalt * Micro Grain [See More]
- Material: Carbide
- Units: Fractional
- Cutting Ends: Single
- Cutter: 1.000
from Cutting Edge Technologies, Inc.
Diameter (metric): 0.5mm. End Type: Square. Flute Length (metric): 1.5mm. Flute Length Type: Standard. Number of Flutes: Overall Length (metric): 38mm. Shank Diameter (metric): 3.00mm. Substrate Material: Carbide. Type: End Mill [See More]
- Material: Micrograin; Carbide
- Cutting Ends: Single
- Geometry: Square
- Units: Metric
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . 1-1/2 in Standard Length TiAlN coated Carbide end mill. [See More]
- Material: Carbide
- Cutter: 0.047
- Geometry: Ballnose
- Shank: 0.125
from Melin Tool Company
Family owned and operated since 1940, Melin Tool began as one of the early manufacturers of end mills. Today, Melin Tool continues to be a leader in offering an ever-expanding product line of our high quality end mills and other cutting tools such as our new countersinks, drills, thread mills, and... [See More]
- Material: Micrograin; Carbide
- Cutting Ends: Double
- Geometry: Chamfer
- Units: Fractional
from Gesswein Co., Inc.
Stay sharper, leave a better finish and have less chipping and breakage. Sub-micron size grain contains more cobalt than standard carbide tools, giving 70% greater strength. Can last up to 5 times longer than standard carbide tools. Superior performance and wear resistance make these blanks and... [See More]
- Material: Carbide
- Cutter: 0.125
- Cutting Ends: Double
- OAL: 1.50
from Superior Tool Service, Inc.
Our 10 flute design for cutting titanium and stainless steel. This end mill is good for profiling applications. The additional flutes increase tool life and allow higher feed rates. Our variable helix/variable spiral design dampens out harmonics. It is available coated or uncoated, no radius, radius... [See More]
- Material: Carbide
- Cutting Ends: Single
- Geometry: Ballnose (optional feature); Radius (optional feature)
- Units: Fractional
from Sandvik AB
. BALL NOSE TYPE. SOLID CARBIDE MATERIAL. 1-1/2 INCH OVERALL LENGTH. 3/16 INCH FLUTE LENGTH. STRAIGHT SHANK TYPE. 1/8 INCH SHANK SIZE. RIGHT HAND DIRECTION OF CUT. 2 FLUTE(S). SPIRAL FLUTE TYPE. 1/16 INCH CUTTER DIAMETER. 1/16 CUTTER DIAMETER - FRACTIONAL. .0625 CUTTER DIAMETER - DECIMAL. PRECISION... [See More]
- Material: Carbide
- Units: Fractional
- Geometry: Ballnose
- Cutter: 0.062
from KEO Cutters
Carbide Decimal 2-Flute Single-End Stub [See More]
- Material: Carbide
- Cutting Ends: Single
- Geometry: Square
- Units: Fractional
from Contour360º
Reduce roughing and finishing cycle time. Achieve superior surface finish at high feed rates. Increased metal removal rates due to heavier chipload. Designed for: Titanium • Stainless steel • Inconel • Cast iron • Carbon steels • High temp alloys. [See More]
- Material: Carbide
- Cutting Ends: Single
- Geometry: Ballnose
- Units: Fractional
from Universal Cutting Tools, Inc.
2-Flute Single End Solid Carbide End Mill - Ball Nose - Long Length - Uncoated * 10% Cobalt * Micro Grain [See More]
- Material: Carbide
- Units: Fractional
- Cutting Ends: Single
- Cutter: 1.000
from Cutting Edge Technologies, Inc.
Diameter (metric): 0.5mm. End Type: Ball. Flute Length (metric): 1.5mm. Flute Length Type: Standard. Number of Flutes: Overall Length (metric): 38mm. Shank Diameter (metric): 3.00mm. Substrate Material: Carbide. Type: End Mill [See More]
- Material: Micrograin; Carbide
- Cutting Ends: Single
- Geometry: Ballnose
- Units: Metric
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . 3-1/4 in Extra Length Uncoated coated Carbide end mill. [See More]
- Material: Carbide
- Cutter: 0.189
- Geometry: Ballnose
- Shank: 0.188
from Melin Tool Company
Family owned and operated since 1940, Melin Tool began as one of the early manufacturers of end mills. Today, Melin Tool continues to be a leader in offering an ever-expanding product line of our high quality end mills and other cutting tools such as our new countersinks, drills, thread mills, and... [See More]
- Material: Micrograin; Carbide
- Cutting Ends: Double
- Geometry: Ballnose
- Units: Fractional
from Superior Tool Service, Inc.
Our 20 flute design for inconel, titanium and stainless steel. This has the same variable helix/variable spiral design as the Patriot X. It works best in profiling applications. It is available coated or uncoated, no radius, radius or chamfer in 3/4" to 1-1/4" diameters. Contact us for price and... [See More]
- Material: Carbide
- Cutting Ends: Single
- Geometry: Ballnose (optional feature); Radius (optional feature)
- Units: Fractional
from Sandvik AB
. BALL NOSE TYPE. SOLID CARBIDE MATERIAL. 1-1/2 INCH OVERALL LENGTH. 3/16 INCH FLUTE LENGTH. STRAIGHT SHANK TYPE. 1/8 INCH SHANK SIZE. RIGHT HAND DIRECTION OF CUT. 4 FLUTE(S). SPIRAL FLUTE TYPE. 1/16 INCH CUTTER DIAMETER. 1/16 CUTTER DIAMETER - FRACTIONAL. .0625 CUTTER DIAMETER - DECIMAL. PRECISION... [See More]
- Material: Carbide
- Units: Fractional
- Geometry: Ballnose
- Cutter: 0.062
from KEO Cutters
Carbide Decimal 4-Flute Single-End Regular [See More]
- Material: Carbide
- Cutting Ends: Single
- Geometry: Square
- Units: Fractional
from Contour360º
Reduce roughing and finishing cycle time. Achieve superior surface finish at high feed rates. Increased metal removal rates due to heavier chipload. Designed for: Titanium • Stainless steel • Inconel • Cast iron • Carbon steels • High temp alloys. [See More]
- Material: Carbide
- Cutting Ends: Single
- Geometry: Radius
- Units: Metric
from Universal Cutting Tools, Inc.
2-Flute Single End Solid Carbide End Mill - Extra Long Length - Uncoated * 10% Cobalt * Micro Grain [See More]
- Material: Carbide
- Units: Fractional
- Cutting Ends: Single
- Cutter: 1.000
from Cutting Edge Technologies, Inc.
Coating: Diamond. Diameter: 1/64". End Type: Square. Flute Length: 5/64". Flute Length Type: Long. Number of Flutes: Overall Length: 2 1/2". Shank Diameter: 1/8". Substrate Material: Carbide. Tolerance: +.000"/-.001". Type: End Mill [See More]
- Material: Carbide
- Cutting Ends: Single
- Geometry: Square
- Units: Fractional
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . 3-1/4 in Extra Length Uncoated coated Carbide end mill. [See More]
- Material: Carbide
- Cutter: 0.311
- Geometry: Ballnose
- Shank: 0.313
from Melin Tool Company
Family owned and operated since 1940, Melin Tool began as one of the early manufacturers of end mills. Today, Melin Tool continues to be a leader in offering an ever-expanding product line of our high quality end mills and other cutting tools such as our new countersinks, drills, thread mills, and... [See More]
- Material: Micrograin; Carbide
- Cutting Ends: Single
- Geometry: Square
- Units: Fractional
from Superior Tool Service, Inc.
A 4 flute rougher/finisher made for steel, designed with a variable helix and variable spiral. Available coated (TiAlN) or uncoated. Also available: no radius, radius (or chamfer) or ball radius. Designed for Composite Material Applications. [See More]
- Material: Carbide
- Cutting Ends: Single
- Geometry: Ballnose (optional feature); Radius (optional feature)
- Units: Fractional
from Sandvik AB
. SQUARE TYPE. SOLID CARBIDE MATERIAL. 2-1/2 INCH OVERALL LENGTH. 1/2 INCH FLUTE LENGTH. STRAIGHT SHANK TYPE. 1/4 INCH SHANK SIZE. RIGHT HAND DIRECTION OF CUT. 2 FLUTE(S). SPIRAL FLUTE TYPE. 1/4 INCH CUTTER DIAMETER. 1/4 CUTTER DIAMETER - FRACTIONAL. .25 CUTTER DIAMETER - DECIMAL. PRECISION TWIST... [See More]
- Material: Carbide
- Units: Fractional
- Geometry: Square
- Cutter: 0.250
from KEO Cutters
2 & 4 Flute Single Ball Nose Extra-Long [See More]
- Material: Carbide
- Cutting Ends: Single
- Geometry: Ballnose
- Units: Fractional
from Contour360º
Reduce roughing and finishing cycle time. Achieve superior surface finish at high feed rates. Increased metal removal rates due to heavier chipload. Designed for: Titanium • Stainless steel • Inconel • Cast iron • Carbon steels • High temp alloys. [See More]
- Material: Carbide
- Cutting Ends: Single
- Geometry: Radius
- Units: Fractional
from Universal Cutting Tools, Inc.
2-Flute Single End Solid Carbide End Mill - Ball Nose - Extra Long Length - Uncoated * 10% Cobalt * Micro Grain [See More]
- Material: Carbide
- Units: Fractional
- Cutting Ends: Single
- Cutter: 1.000
from Cutting Edge Technologies, Inc.
Coating: Uncoated. Diameter: 1/32". End Type: Square. Flute Length: 3/32". Flute Length Type: Standard. Number of Flutes: Overall Length: 1 1/2". Shank Diameter: 1/8". Substrate Material: Carbide. Type: End Mill [See More]
- Material: Carbide
- Cutting Ends: Single
- Geometry: Square
- Units: Fractional
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . 2 in Extra Length TiAlN coated Carbide end mill. [See More]
- Material: Carbide
- Cutter: 0.126
- Geometry: Ballnose
- Shank: 0.125
from Melin Tool Company
Family owned and operated since 1940, Melin Tool began as one of the early manufacturers of end mills. Today, Melin Tool continues to be a leader in offering an ever-expanding product line of our high quality end mills and other cutting tools such as our new countersinks, drills, thread mills, and... [See More]
- Material: Micrograin; Carbide
- Cutting Ends: Single
- Geometry: Ballnose
- Units: Fractional
from Sandvik AB
SQUARE TYPE. SOLID CARBIDE MATERIAL. 1-1/2 INCH OVERALL LENGTH. 1/4 INCH FLUTE LENGTH. STRAIGHT SHANK TYPE. 1/8 INCH SHANK SIZE. RIGHT HAND DIRECTION OF CUT. 4 FLUTE(S). SPIRAL FLUTE TYPE. 1/8 INCH CUTTER DIAMETER. 1/8 CUTTER DIAMETER - FRACTIONAL. .125 CUTTER DIAMETER - DECIMAL. PRECISION TWIST... [See More]
- Material: Carbide
- Units: Fractional
- Geometry: Square
- Cutter: 0.125
from KEO Cutters
2 and 4 Flute Double-End Ball Nose Stub [See More]
- Material: Carbide
- Cutting Ends: Double
- Geometry: Ballnose
- Units: Fractional
from Contour360º
Reduce finishing cycle time. Achieve superior surface finish at high feed rates. Increased metal removal rates due to heavier chipload. Designed for: Titanium • Stainless steel • Inconel • Cast iron. • Carbon steels • High temp alloys. [See More]
- Material: Carbide
- Cutting Ends: Single
- Geometry: Radius
- Units: Fractional
from Universal Cutting Tools, Inc.
4-Flute Single End Solid Carbide End Mill - Regular Length - Uncoated * 10% Cobalt * Micro Grain [See More]
- Material: Carbide
- Units: Fractional
- Cutting Ends: Single
- Cutter: 1.000
from Cutting Edge Technologies, Inc.
Diameter: 3/16". End Type: Square. Flute Length: 5/8". Flute Length Type: Standard. Number of Flutes: Overall Length: 2". Shank Diameter: 3/16". Substrate Material: Carbide. Type: End Mill [See More]
- Material: Carbide
- Cutting Ends: Single
- Geometry: Square
- Units: Fractional
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . 1-1/2 in Stub Length Uncoated coated Carbide end mill. [See More]
- Material: Carbide
- Cutter: 0.031
- Geometry: Ballnose
- Shank: 0.125
from Melin Tool Company
Family owned and operated since 1940, Melin Tool began as one of the early manufacturers of end mills. Today, Melin Tool continues to be a leader in offering an ever-expanding product line of our high quality end mills and other cutting tools such as our new countersinks, drills, thread mills, and... [See More]
- Material: Micrograin; Carbide
- Cutting Ends: Single
- Geometry: Ballnose
- Units: Fractional
from Sandvik AB
. SQUARE TYPE. SOLID CARBIDE MATERIAL. 3-1/16 INCH OVERALL LENGTH. 3/8 INCH FLUTE LENGTH. STRAIGHT SHANK TYPE. 3/8 INCH SHANK SIZE. RIGHT HAND DIRECTION OF CUT. 2 FLUTE(S). SPIRAL FLUTE TYPE. 1/8 INCH CUTTER DIAMETER. 1/8 CUTTER DIAMETER - FRACTIONAL. .125 CUTTER DIAMETER - DECIMAL. PRECISION TWIST... [See More]
- Material: Carbide
- Units: Fractional
- Geometry: Square
- Cutter: 0.125
from KEO Cutters
2 and 4 Flute Double-End Stub [See More]
- Material: Carbide
- Cutting Ends: Double
- Geometry: Square
- Units: Fractional
from Contour360º
Reduce roughing and finishing cycle time. Achieve superior surface finish at high feed rates. Increased metal removal rates due to heavier chipload. Designed for: Titanium • Stainless steel • Inconel • Cast iron • Carbon steels • High temp alloys. [See More]
- Material: Carbide
- Cutting Ends: Single
- Geometry: Square
- Units: Fractional
from Universal Cutting Tools, Inc.
4-Flute Single End Solid Carbide End Mill - Ball Nose - Regular Length - Uncoated * 10% Cobalt * Micro Grain [See More]
- Material: Carbide
- Units: Fractional
- Cutting Ends: Single
- Cutter: 1.000
from Cutting Edge Technologies, Inc.
Coating: TIN. Diameter: 3/16". End Type: Square. Flute Length: 5/8". Flute Length Type: Standard. Number of Flutes: Overall Length: 2". Shank Diameter: 3/16". Substrate Material: Carbide. Type: End Mill [See More]
- Material: Carbide
- Cutting Ends: Single
- Geometry: Square
- Units: Fractional
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . 1-1/2 in Stub Length Uncoated coated Carbide end mill. [See More]
- Material: Carbide
- Cutter: 0.031
- Geometry: Ballnose
- Shank: 0.125
from Melin Tool Company
Used for radius and conouring part surfaces. Designed to cut materials such as stainless, tough alloys, abrasive, and non-ferrous. Made from premium submicron grain carbide. [See More]
- Material: Micrograin; Carbide
- Cutting Ends: Double
- Geometry: Ballnose
- Units: Fractional
from Sandvik AB
SQUARE TYPE. SOLID CARBIDE MATERIAL. 3-1/16 INCH OVERALL LENGTH. 3/8 INCH FLUTE LENGTH. STRAIGHT SHANK TYPE. 3/8 INCH SHANK SIZE. RIGHT HAND DIRECTION OF CUT. 4 FLUTE(S). SPIRAL FLUTE TYPE. 1/8 INCH CUTTER DIAMETER. 1/8 CUTTER DIAMETER - FRACTIONAL. .125 CUTTER DIAMETER - DECIMAL. PRECISION TWIST... [See More]
- Material: Carbide
- Units: Fractional
- Geometry: Square
- Cutter: 0.125
from KEO Cutters
2 and 4 Flute Single-End Ball Nose Long [See More]
- Material: Carbide
- Cutting Ends: Single
- Geometry: Ballnose
- Units: Fractional
from Contour360º
Reduce finishing cycle time. Achieve superior surface finish at high feed rates. Increased metal removal rates due to heavier chipload. Designed for: Titanium • Stainless steel • Inconel • Cast iron. • Carbon steels • High temp alloys. [See More]
- Material: Carbide
- Cutting Ends: Single
- Geometry: Square
- Units: Fractional
from Universal Cutting Tools, Inc.
4-Flute Single End Solid Carbide End Mill - Long Length - Uncoated * 10% Cobalt * Micro Grain [See More]
- Material: Carbide
- Units: Fractional
- Cutting Ends: Single
- Cutter: 1.000
from Cutting Edge Technologies, Inc.
Coating: Uncoated. Diameter: 1/4". End Type: Square. Flute Length: 3/4". Flute Length Type: Standard. Helix: 50 Degree. Number of Flutes: Overall Length: 2 1/2". Shank Diameter: 1/4". Substrate Material: Carbide. Type: End Mill [See More]
- Material: Carbide
- Cutting Ends: Single
- Geometry: Square
- Units: Fractional
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . 1-1/2 in Regular Length Uncoated coated Carbide end mill. [See More]
- Material: Carbide
- Cutter: 0.031
- Geometry: Ballnose
- Shank: 0.125
from Melin Tool Company
Used for radius and contouring part surfaces. Designed to cut materials such as stainless, tough alloys, abrasive, and non-ferrous. Made from premium submicron grain carbide. [See More]
- Material: Micrograin; Carbide
- Cutting Ends: Double
- Geometry: Ballnose
- Units: Fractional
from Sandvik AB
. BALL NOSE TYPE. SOLID CARBIDE MATERIAL. 1-1/2 INCH OVERALL LENGTH. 3/16 INCH FLUTE LENGTH. STRAIGHT SHANK TYPE. 1/8 INCH SHANK SIZE. RIGHT HAND DIRECTION OF CUT. 2 FLUTE(S). SPIRAL FLUTE TYPE. 1/16 INCH CUTTER DIAMETER. 1/16 CUTTER DIAMETER - FRACTIONAL. .0625 CUTTER DIAMETER - DECIMAL. PRECISION... [See More]
- Material: Carbide
- Units: Fractional
- Geometry: Ballnose
- Cutter: 0.062
from KEO Cutters
2 and 4 Flute Single-End Extra-Long [See More]
- Material: Carbide
- Cutting Ends: Single
- Geometry: Square
- Units: Fractional
from Contour360º
2 and 4 Flute, 30 Degree Helix, Center Cutting. Solid Carbide End Mills. [See More]
- Material: Carbide
- Cutting Ends: Single
- Geometry: Ballnose
- Units: Fractional
from Universal Cutting Tools, Inc.
4-Flute Single End Solid Carbide End Mill - Ball Nose - Long Length - Uncoated * 10% Cobalt * Micro Grain [See More]
- Material: Carbide
- Units: Fractional
- Cutting Ends: Single
- Cutter: 1.000
from Cutting Edge Technologies, Inc.
Coating: TIN. Diameter: 1/4". End Type: Square. Flute Length: 3/4". Flute Length Type: Standard. Helix: 50 Degree. Number of Flutes: Overall Length: 2 1/2". Shank Diameter: 1/4". Substrate Material: Carbide. Type: End Mill [See More]
- Material: Carbide
- Cutting Ends: Single
- Geometry: Square
- Units: Fractional
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . 1-1/2 in Standard Length TiCN coated Carbide end mill. [See More]
- Material: Carbide
- Cutter: 0.063
- Geometry: Ballnose
- Shank: 0.125
from Melin Tool Company
Used for general purpose milling in most materials of medium hardness such as steel, brass, iron, and non-ferrous materials. Made from premium submicron grain carbide. [See More]
- Material: Micrograin; Carbide
- Cutting Ends: Double
- Geometry: Square
- Units: Fractional
from Sandvik AB
. SQUARE TYPE. SOLID CARBIDE MATERIAL. 1-1/2 INCH OVERALL LENGTH. 3/16 INCH FLUTE LENGTH. STRAIGHT SHANK TYPE. 1/8 INCH SHANK SIZE. RIGHT HAND DIRECTION OF CUT. 4 FLUTE(S). SPIRAL FLUTE TYPE. 1/16 INCH CUTTER DIAMETER. 1/16 CUTTER DIAMETER - FRACTIONAL. .0625 CUTTER DIAMETER - DECIMAL. PRECISION... [See More]
- Material: Carbide
- Units: Fractional
- Geometry: Square
- Cutter: 0.062
from KEO Cutters
2 and 4 Flute Single-End Long [See More]
- Material: Carbide
- Cutting Ends: Single
- Geometry: Square
- Units: Fractional
from Contour360º
2 and 4 Flute, 30 Degree Helix, Center Cutting. Solid Carbide End Mills. [See More]
- Material: Carbide
- Cutting Ends: Single
- Geometry: Square
- Units: Fractional
from Universal Cutting Tools, Inc.
4-Flute Single End Solid Carbide End Mill - Extra Long Length - Uncoated * 10% Cobalt * Micro Grain [See More]
- Material: Carbide
- Units: Fractional
- Cutting Ends: Single
- Cutter: 1.000
from Cutting Edge Technologies, Inc.
Coating: Uncoated. Diameter: 1/32". End Type: Square. Flute Length: 3/32". Flute Length Type: Standard. Number of Flutes: Overall Length: 1 1/2". Shank Diameter: 1/8". Substrate Material: Carbide. Type: End Mill [See More]
- Material: Carbide
- Cutting Ends: Single
- Geometry: Square
- Units: Fractional
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . 1-1/2 in Standard Length TiCN coated Carbide end mill. [See More]
- Material: Carbide
- Cutter: 0.126
- Geometry: Ballnose
- Shank: 0.125
from Melin Tool Company
Used for general purpose milling in most materials of medium hardness such as steel, brass, iron, and non-ferrous materials. Short flute length. High rigidity and minimal tool defection. Made from premium submicron grain carbide. [See More]
- Material: Micrograin; Carbide
- Cutting Ends: Double
- Geometry: Square
- Units: Fractional
from Sandvik AB
. SQUARE TYPE. SOLID CARBIDE MATERIAL. 2 INCH OVERALL LENGTH. 5/8 INCH FLUTE LENGTH. STRAIGHT SHANK TYPE. 3/16 INCH SHANK SIZE. RIGHT HAND DIRECTION OF CUT. 3 FLUTE(S). FAST SPIRAL FLUTE TYPE. 3/16 INCH CUTTER DIAMETER. 3/16 CUTTER DIAMETER - FRACTIONAL. .1875 CUTTER DIAMETER - DECIMAL. 60 HELIX... [See More]
- Material: Carbide
- Units: Fractional
- Geometry: Square
- Cutter: 0.188
from KEO Cutters
2 and 4 Flute Single-End Regular [See More]
- Material: Carbide
- Cutting Ends: Single
- Geometry: Square
- Units: Fractional
from Contour360º
2 and 4 Flute, 30 Degree Helix, Center Cutting. Solid Carbide End Mills. [See More]
- Material: Carbide
- Cutting Ends: Single
- Geometry: Radius
- Units: Fractional
from Universal Cutting Tools, Inc.
4-Flute Single End Solid Carbide End Mill - Ball Nose - Extra Long Length - Uncoated * 10% Cobalt * Micro Grain [See More]
- Material: Carbide
- Units: Fractional
- Cutting Ends: Single
- Cutter: 1.000
from Cutting Edge Technologies, Inc.
Diameter: 1/32". End Type: Square. Flute Length: 1/16". Flute Length Type: Stub. Number of Flutes: Overall Length: 1 1/2". Shank Diameter: 1/8". Substrate Material: Carbide. Type: End Mill [See More]
- Material: Carbide
- Cutting Ends: Single
- Geometry: Square
- Units: Fractional
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . 50.0 mm Standard Length TiAlN coated Carbide end mill. [See More]
- Material: Carbide
- Cutter: 0.157
- Geometry: Ballnose
- Shank: 0.236
from Melin Tool Company
Use for radius and contouring part surfaces. Designed to cut materials ranging from nickel base alloy, stainless, tough alloys, abrasive and nonferrous. Made from premium submicron grain carbide. [See More]
- Material: Micrograin; Carbide
- Cutting Ends: Single
- Geometry: Ballnose
- Units: Fractional
from Sandvik AB
. SQUARE TYPE. SOLID CARBIDE MATERIAL. 1-1/2 INCH OVERALL LENGTH. 3/16 INCH FLUTE LENGTH. STRAIGHT SHANK TYPE. 1/8 INCH SHANK SIZE. RIGHT HAND DIRECTION OF CUT. 2 FLUTE(S). SPIRAL FLUTE TYPE. 1/16 INCH CUTTER DIAMETER. 1/16 CUTTER DIAMETER - FRACTIONAL. .0625 CUTTER DIAMETER - DECIMAL. PRECISION... [See More]
- Material: Carbide
- Units: Fractional
- Geometry: Square
- Cutter: 0.062
from KEO Cutters
2 and 4 Flute Single-End Stub [See More]
- Material: Carbide
- Cutting Ends: Single
- Geometry: Square
- Units: Fractional
from Contour360º
2 and 4 Flute, 30 Degree Helix, Center Cutting. Solid Carbide End Mills. [See More]
- Material: Carbide
- Cutting Ends: Single
- Geometry: Square
- Units: Fractional
from Universal Cutting Tools, Inc.
2-Flute Double End Solid Carbide End Mill - Stub Length - Uncoated * 10% Cobalt * Micro Grain [See More]
- Material: Carbide
- Units: Fractional
- Cutting Ends: Double
- Cutter: 0.062
from Cutting Edge Technologies, Inc.
Diameter: 1/8". End Type: Square. Flute Length: 3/4". Flute Length Type: Long. Number of Flutes: Overall Length: 2 1/4". Shank Diameter: 1/8". Substrate Material: Carbide. Type: End Mill [See More]
- Material: Carbide
- Cutting Ends: Single
- Geometry: Square
- Units: Fractional
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . 50.0 mm Standard Length Alumastar coated Carbide end mill. [See More]
- Material: Carbide
- Cutter: 0.157
- Geometry: Ballnose
- Shank: 0.236
from Melin Tool Company
3 flute design will usually allow feed rates 50% faster than 2 flute tools. Used for general purpose milling in most materials of medium hardness such as steel, brass, iron, and non-ferrous materials. Made from premium submicron grain carbide. [See More]
- Material: Micrograin; Carbide
- Cutting Ends: Single
- Geometry: Ballnose
- Units: Fractional
from Sandvik AB
. SQUARE TYPE. SOLID CARBIDE MATERIAL. 1-1/2 INCH OVERALL LENGTH. 3/16 INCH FLUTE LENGTH. STRAIGHT SHANK TYPE. 1/8 INCH SHANK SIZE. RIGHT HAND DIRECTION OF CUT. 3 FLUTE(S). SPIRAL FLUTE TYPE. 1/16 INCH CUTTER DIAMETER. 1/16 CUTTER DIAMETER - FRACTIONAL. .0625 CUTTER DIAMETER - DECIMAL. PRECISION... [See More]
- Material: Carbide
- Units: Fractional
- Geometry: Square
- Cutter: 0.062
from KEO Cutters
2 & 4 Flute Single End Extra Long Reach [See More]
- Material: Carbide
- Cutting Ends: Single
- Geometry: Square (optional feature); Ballnose (optional feature)
- Units: Fractional
from Universal Cutting Tools, Inc.
4-Flute Double End Solid Carbide End Mill - Stub Length - Uncoated * 10% Cobalt * Micro Grain [See More]
- Material: Carbide
- Units: Fractional
- Cutting Ends: Double
- Cutter: 0.062
from Cutting Edge Technologies, Inc.
Diameter: 1/8". End Type: Ball. Flute Length: 3/4". Flute Length Type: Long. Number of Flutes: Overall Length: 2 1/4". Shank Diameter: 1/8". Substrate Material: Carbide. Type: End Mill [See More]
- Material: Carbide
- Cutting Ends: Single
- Geometry: Ballnose
- Units: Fractional
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . 1-1/2 in Standard Length Uncoated coated Carbide end mill. [See More]
- Material: Carbide
- Cutter: 0.126
- Geometry: Ballnose
- Shank: 0.125
from Melin Tool Company
Used for general purpose milling in most materials of medium hardness such as steel, brass, iron, and non-ferrous materials. Made from premium submicron grain carbide. [See More]
- Material: Micrograin; Carbide
- Cutting Ends: Single
- Geometry: Square
- Units: Fractional
from Sandvik AB
. BALL NOSE TYPE. SOLID CARBIDE MATERIAL. 1-1/2 INCH OVERALL LENGTH. 3/16 INCH FLUTE LENGTH. STRAIGHT SHANK TYPE. 1/8 INCH SHANK SIZE. RIGHT HAND DIRECTION OF CUT. 4 FLUTE(S). SPIRAL FLUTE TYPE. 1/16 INCH CUTTER DIAMETER. 1/16 CUTTER DIAMETER - FRACTIONAL. .0625 CUTTER DIAMETER - DECIMAL. PRECISION... [See More]
- Material: Carbide
- Units: Fractional
- Geometry: Ballnose
- Cutter: 0.062
from KEO Cutters
Corner Radius Carbide 2- & 4-Flute [See More]
- Material: Carbide
- Cutting Ends: Single
- Geometry: Radius
- Units: Fractional
from Universal Cutting Tools, Inc.
45-Degree Hi-Helix 3-Flute Solid Carbide End Mill - Center Cutting * 10% Cobalt * Micro Grain [See More]
- Material: Carbide
- Cutter: 1.000
- Units: Fractional
- Shank: 1.000
from Cutting Edge Technologies, Inc.
Diameter: 1/32". End Type: Square. Flute Length: 1/16". Flute Length Type: Stub. Number of Flutes: Overall Length: 1 1/2". Shank Diameter: 1/8". Substrate Material: Carbide. Type: End Mill [See More]
- Material: Carbide
- Cutting Ends: Double
- Geometry: Square
- Units: Fractional
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . 1-1/2 in Standard Length Uncoated coated Carbide end mill. [See More]
- Material: Carbide
- Cutter: 0.031
- Geometry: Ballnose
- OAL: 1.50
from Melin Tool Company
3 flute design will usually allow feed rates 50% faster than 2 flute tools. Used for general purpose milling in most materials of medium hardness such as steel, brass, iron, and non-ferrous materials. Made from premium submicron grain carbide. [See More]
- Material: Micrograin; Carbide
- Cutting Ends: Single
- Geometry: Square
- Units: Fractional
from Sandvik AB
. SQUARE TYPE. SOLID CARBIDE MATERIAL. 3 INCH OVERALL LENGTH. 1 INCH FLUTE LENGTH. STRAIGHT SHANK TYPE. 1/8 INCH SHANK SIZE. RIGHT HAND DIRECTION OF CUT. 2 FLUTE(S). SPIRAL FLUTE TYPE. 1/8 INCH CUTTER DIAMETER. 1/8 CUTTER DIAMETER - FRACTIONAL. .125 CUTTER DIAMETER - DECIMAL. PRECISION TWIST... [See More]
- Material: Carbide
- Units: Fractional
- Geometry: Square
- Cutter: 0.125
from KEO Cutters
2 and 4 Flute Square End and Ball Nose [See More]
- Material: Carbide
- Cutting Ends: Single
- Geometry: Square (optional feature); Ballnose (optional feature)
- Units: Fractional
from Universal Cutting Tools, Inc.
60-Degree Hi-Helix 3-Flute Solid Carbide End Mill - Center Cutting * 10% Cobalt * Micro Grain [See More]
- Material: Carbide
- Cutter: 1.000
- Units: Fractional
- Shank: 1.000
from Cutting Edge Technologies, Inc.
Diameter: 1/32". End Type: Ball. Flute Length: 1/16". Flute Length Type: Stub. Number of Flutes: Overall Length: 1 1/2". Shank Diameter: 1/8". Stub Length: Substrate Material: Carbide. Type: End Mill [See More]
- Material: Carbide
- Cutting Ends: Single
- Geometry: Ballnose
- Units: Fractional
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . 1-1/2 in Standard Length AlTiN coated Carbide end mill. [See More]
- Material: Carbide
- Cutter: 0.031
- Geometry: Ballnose
- OAL: 1.50
from Melin Tool Company
35 ° HELIX END MILLS 3 FLUTE, ALL LENGTHS. Special helix for diffcult to machine materials such as stainless or inconel. Small corner radius for added strength and smoother cutting action. Made from premium submicron grain carbide. [See More]
- Material: Micrograin; Carbide
- Cutting Ends: Single
- Geometry: Radius
- Units: Fractional
from Sandvik AB
. SQUARE TYPE. SOLID CARBIDE MATERIAL. 3 INCH OVERALL LENGTH. 1 INCH FLUTE LENGTH. STRAIGHT SHANK TYPE. 1/8 INCH SHANK SIZE. RIGHT HAND DIRECTION OF CUT. 4 FLUTE(S). SPIRAL FLUTE TYPE. 1/8 INCH CUTTER DIAMETER. 1/8 CUTTER DIAMETER - FRACTIONAL. .125 CUTTER DIAMETER - DECIMAL. PRECISION TWIST... [See More]
- Material: Carbide
- Units: Fractional
- Geometry: Square
- Cutter: 0.125
from KEO Cutters
3- and 4-Flute Long Shank [See More]
- Material: Carbide
- Cutting Ends: Single
- Geometry: Square (optional feature); Ballnose (optional feature)
- Units: Fractional
from Cutting Edge Technologies, Inc.
Diameter: 1/8". End Type: Square. Flute Length: 3/4". Flute Length Type: Long. Number of Flutes: Overall Length: 2 1/4". Shank Diameter: 1/8". Substrate Material: Carbide. Type: End Mill [See More]
- Material: Carbide
- Cutting Ends: Single
- Geometry: Square
- Units: Fractional
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . 1-1/2 in Standard Length Uncoated coated Carbide end mill. [See More]
- Material: Carbide
- Cutter: 0.031
- Geometry: Ballnose
- OAL: 1.50
from Melin Tool Company
40 ° HELIX END MILLS 2 AND 4 FLUTES. High helix for excellent chip ejection. Higher shearing action. Used for stainless steel and exotic materials. Made from premium submicron grain carbide. [See More]
- Material: Micrograin; Carbide
- Cutting Ends: Single
- Geometry: Radius
- Units: Fractional
from Sandvik AB
. BALL NOSE TYPE. SOLID CARBIDE MATERIAL. 3 INCH OVERALL LENGTH. 1 INCH FLUTE LENGTH. STRAIGHT SHANK TYPE. 1/8 INCH SHANK SIZE. RIGHT HAND DIRECTION OF CUT. 2 FLUTE(S). SPIRAL FLUTE TYPE. 1/8 INCH CUTTER DIAMETER. 1/8 CUTTER DIAMETER - FRACTIONAL. .125 CUTTER DIAMETER - DECIMAL. PRECISION TWIST... [See More]
- Material: Carbide
- Units: Fractional
- Geometry: Ballnose
- Cutter: 0.125
from KEO Cutters
3-Flute Decimal Extra Long Reach [See More]
- Material: Carbide
- Cutting Ends: Single
- Geometry: Square (optional feature); Ballnose (optional feature)
- Units: Fractional
from Cutting Edge Technologies, Inc.
Diameter: 1/8". End Type: Ball. Flute Length: 3/4". Flute Length Type: Long. Number of Flutes: Overall Length: 2 1/4". Shank Diameter: 1/8". Substrate Material: Carbide. Type: End Mill [See More]
- Material: Carbide
- Cutting Ends: Single
- Geometry: Ballnose
- Units: Fractional
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . 1-1/2 in Standard Length AlTiN coated Carbide end mill. [See More]
- Material: Carbide
- Cutter: 0.031
- Geometry: Ballnose
- OAL: 1.50
from Melin Tool Company
40 ° HELIX END MILLS BALL END, 2 AND 4 FLUTES. High helix for excellent chip ejection. For radius and contouring part surfaces. Higher shearing action. Used for stainless steel and exotic materials. Made from premium submicron grain carbide. [See More]
- Material: Micrograin; Carbide
- Cutting Ends: Single
- Geometry: Ballnose
- Units: Fractional
from Sandvik AB
. BALL NOSE TYPE. SOLID CARBIDE MATERIAL. 3 INCH OVERALL LENGTH. 1 INCH FLUTE LENGTH. STRAIGHT SHANK TYPE. 1/8 INCH SHANK SIZE. RIGHT HAND DIRECTION OF CUT. 4 FLUTE(S). SPIRAL FLUTE TYPE. 1/8 INCH CUTTER DIAMETER. 1/8 CUTTER DIAMETER - FRACTIONAL. .125 CUTTER DIAMETER - DECIMAL. PRECISION TWIST... [See More]
- Material: Carbide
- Units: Fractional
- Geometry: Ballnose
- Cutter: 0.125
from KEO Cutters
3-Flute Extra Long Reach [See More]
- Material: Carbide
- Cutting Ends: Single
- Geometry: Square (optional feature); Ballnose (optional feature)
- Units: Fractional
from Cutting Edge Technologies, Inc.
Diameter: 1/32". End Type: Ball. Flute Length: 1/16". Flute Length Type: Stub. Number of Flutes: Overall Length: 1 1/2". Shank Diameter: 1/8". Substrate Material: Carbide. Type: End Mill [See More]
- Material: Carbide
- Cutting Ends: Double
- Geometry: Ballnose
- Units: Fractional
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . 2-1/2 in Long Length Uncoated coated Carbide end mill. [See More]
- Material: Carbide
- Cutter: 0.189
- Geometry: Ballnose
- Shank: 0.188
from Melin Tool Company
45 ° HELIX END MILLS 5 FLUTE. Five flute design provides excellent cutting performance at faster feed rates. Smooth cutting action in tough to machine material with excellent chip ejection. Made from premium submicron grain carbide. [See More]
- Material: Micrograin; Carbide
- Cutting Ends: Single
- Geometry: Radius
- Units: Fractional
from Sandvik AB
. SQUARE TYPE. SOLID CARBIDE MATERIAL. 3 INCH OVERALL LENGTH. 1 INCH FLUTE LENGTH. STRAIGHT SHANK TYPE. 1/8 INCH SHANK SIZE. RIGHT HAND DIRECTION OF CUT. 2 FLUTE(S). SPIRAL FLUTE TYPE. 1/8 INCH CUTTER DIAMETER. 1/8 CUTTER DIAMETER - FRACTIONAL. .125 CUTTER DIAMETER - DECIMAL. PRECISION TWIST... [See More]
- Material: Carbide
- Units: Fractional
- Geometry: Square
- Cutter: 0.125
from KEO Cutters
3-Flute Extra Reach Stub Ball Nose [See More]
- Material: Carbide
- Cutting Ends: Single
- Geometry: Ballnose
- Units: Fractional
from Cutting Edge Technologies, Inc.
Diameter: 1/32". End Type: Square. Flute Length: 1/16". Flute Length Type: Stub. Number of Flutes: Overall Length: 1 1/2". Shank Diameter: 1/8". Substrate Material: Carbide. Type: End Mill [See More]
- Material: Carbide
- Cutting Ends: Single
- Geometry: Square
- Units: Fractional
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . 2-1/4 in Long Length AlTiN coated Carbide end mill. [See More]
- Material: Carbide
- Cutter: 0.126
- Geometry: Ballnose
- Shank: 0.125
from Melin Tool Company
Increased core diameter for added strength. Use for light fnishing cuts. Made from premium ultrafne grain carbide. [See More]
- Material: Micrograin; Carbide
- Cutting Ends: Single
- Geometry: Radius
- Units: Fractional
from Sandvik AB
. SQUARE TYPE. SOLID CARBIDE MATERIAL. 3 INCH OVERALL LENGTH. 1 INCH FLUTE LENGTH. STRAIGHT SHANK TYPE. 1/8 INCH SHANK SIZE. RIGHT HAND DIRECTION OF CUT. 4 FLUTE(S). SPIRAL FLUTE TYPE. 1/8 INCH CUTTER DIAMETER. 1/8 CUTTER DIAMETER - FRACTIONAL. .125 CUTTER DIAMETER - DECIMAL. PRECISION TWIST... [See More]
- Material: Carbide
- Units: Fractional
- Geometry: Square
- Cutter: 0.125
from KEO Cutters
3-Flute Long Reach [See More]
- Material: Carbide
- Cutting Ends: Single
- Geometry: Square (optional feature); Ballnose (optional feature)
- Units: Fractional
from Cutting Edge Technologies, Inc.
Diameter: 1/32". End Type: Square. Flute Length: 1/16". Flute Length Type: Stub. Number of Flutes: Overall Length: 1 1/2". Shank Diameter: 1/8". Substrate Material: Carbide. Type: End Mill [See More]
- Material: Carbide
- Cutting Ends: Double
- Geometry: Square
- Units: Fractional
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . 2-1/4 in Long Length Uncoated coated Carbide end mill. [See More]
- Material: Carbide
- Cutter: 0.126
- Geometry: Ballnose
- Shank: 0.125
from Melin Tool Company
60 ° HELIX END MILLS 3 FLUTE. Used for stainless and high temperature alloy materials. High helix provides excellent shearing action. Made from premium submicron grain carbide. [See More]
- Material: Micrograin; Carbide
- Cutting Ends: Single
- Geometry: Radius
- Units: Fractional
from Sandvik AB
. BALL NOSE TYPE. SOLID CARBIDE MATERIAL. 3 INCH OVERALL LENGTH. 1 INCH FLUTE LENGTH. STRAIGHT SHANK TYPE. 1/8 INCH SHANK SIZE. RIGHT HAND DIRECTION OF CUT. 2 FLUTE(S). SPIRAL FLUTE TYPE. 1/8 INCH CUTTER DIAMETER. 1/8 CUTTER DIAMETER - FRACTIONAL. .125 CUTTER DIAMETER - DECIMAL. PRECISION TWIST... [See More]
- Material: Carbide
- Units: Fractional
- Geometry: Ballnose
- Cutter: 0.125
from KEO Cutters
3-Flute Long Reach Single-End High Performance [See More]
- Material: Carbide
- Cutting Ends: Single
- Geometry: Square (optional feature); Ballnose (optional feature)
- Units: Fractional
from Cutting Edge Technologies, Inc.
Diameter: 1/32". End Type: Ball. Flute Length: 1/16". Flute Length Type: Stub. Number of Flutes: Overall Length: 1 1/2". Shank Diameter: 1/8". Stub Length: Substrate Material: Carbide. Type: End Mill [See More]
- Material: Carbide
- Cutting Ends: Single
- Geometry: Ballnose
- Units: Fractional
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . 2-1/4 in Long Length AlTiN coated Carbide end mill. [See More]
- Material: Carbide
- Cutter: 0.126
- Geometry: Ballnose
- Shank: 0.125
from Melin Tool Company
Special geometry allows for high chip loads and feed rates. Small corner radius for added strength and smoother cutting action. Excellent for slotting and profling at high speeds. Made from premium submicron grain carbide. Available with ZrN and other coatings. See Coating Information section for... [See More]
- Material: Micrograin; Carbide
- Cutting Ends: Single
- Geometry: Radius
- Units: Fractional
from Sandvik AB
. BALL NOSE TYPE. SOLID CARBIDE MATERIAL. 3 INCH OVERALL LENGTH. 1 INCH FLUTE LENGTH. STRAIGHT SHANK TYPE. 1/8 INCH SHANK SIZE. RIGHT HAND DIRECTION OF CUT. 4 FLUTE(S). SPIRAL FLUTE TYPE. 1/8 INCH CUTTER DIAMETER. 1/8 CUTTER DIAMETER - FRACTIONAL. .125 CUTTER DIAMETER - DECIMAL. PRECISION TWIST... [See More]
- Material: Carbide
- Units: Fractional
- Geometry: Ballnose
- Cutter: 0.125
from KEO Cutters
3-Flute Regular Length Extended Reach [See More]
- Material: Carbide
- Cutting Ends: Single
- Geometry: Radius
- Units: Fractional
from Cutting Edge Technologies, Inc.
Coating: Uncoated. Diameter: 1/4". End Type: Square. Flute Length: 3/4". Flute Length Type: Standard. Number of Flutes: Overall Length: 2 1/2". Shank Diameter: 1/4". Substrate Material: Carbide. Type: End Mill [See More]
- Material: Carbide
- Cutting Ends: Single
- Geometry: Square
- Units: Fractional
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . 3 in Extra Long Length Uncoated coated Carbide end mill. [See More]
- Material: Carbide
- Cutter: 0.126
- Geometry: Ballnose
- Shank: 0.125
from Melin Tool Company
3 Flute design for lighter finishing cuts. Small corner radius for added strength and smoother cutting action. Made from premium submicron grain carbide. Available with ZrN and other coatings. See Coating Information section for more details. [See More]
- Material: Micrograin; Carbide
- Cutting Ends: Single
- Geometry: Radius
- Units: Fractional
from KEO Cutters
3-Flute Stub Length [See More]
- Material: Carbide
- Cutting Ends: Single
- Geometry: Radius
- Units: Fractional
from Cutting Edge Technologies, Inc.
Coating: TIN. Diameter: 1/4". End Type: Square. Flute Length: 3/4". Flute Length Type: Standard. Number of Flutes: Overall Length: 2 1/2". Shank Diameter: 1/4". Substrate Material: Carbide. Type: End Mill [See More]
- Material: Carbide
- Cutting Ends: Single
- Geometry: Square
- Units: Fractional
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . 3 in Extra Long Length AlTiN coated Carbide end mill. [See More]
- Material: Carbide
- Cutter: 0.126
- Geometry: Ballnose
- Shank: 0.125
from Melin Tool Company
High performance CVD diamond coated tools are used to machine graphite and other non-ferrous materials. Typically extend tool life by 10 to 25 times over uncoated tools when cutting various non-metallic materials. A special carbide substrate is used to insure proper diamond adhesion to the tool. [See More]
- Material: Micrograin; Carbide
- Cutting Ends: Single
- Geometry: Square
- Units: Fractional
from KEO Cutters
3-Flute Stub/Long Reach/Long Shank [See More]
- Material: Carbide
- Cutting Ends: Single
- Geometry: Square (optional feature); Ballnose (optional feature)
- Units: Fractional
from Cutting Edge Technologies, Inc.
Diameter: 1/32". End Type: Ball. Flute Length: 1/16". Flute Length Type: Stub. Number of Flutes: Overall Length: 1 1/2". Shank Diameter: 1/8". Substrate Material: Carbide. Type: End Mill [See More]
- Material: Carbide
- Cutting Ends: Double
- Geometry: Ballnose
- Units: Fractional
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . 3 in Extra Long Length Uncoated coated Carbide end mill. [See More]
- Material: Carbide
- Cutter: 0.126
- Geometry: Ballnose
- Shank: 0.125
from Melin Tool Company
Excellent for slotting and profling at high speeds. Small corner radius for added strength and smoother cutting action. Made from premium submicron grain carbide. [See More]
- Material: Micrograin; Carbide
- Cutting Ends: Single
- Geometry: Radius
- Units: Metric