Aluminum Titanium Nitride (AlTiN) End Mills
from SCT - Scientific Cutting Tools, Inc.
Corner Rounding End Mills have three flutes and are double ended to provide maximum value. The cutter diameter and the cut depth are held to ±0.001 inch tolerance to provide ease of set-up. [See More]
- Coating: Uncoated; Coated; Aluminum Titanium Nitride
- Units: Fractional
- Cutting Ends: Single
- Shank: 0.125 to 5.000
from Contour360º
2 and 4 Flute, 30 Degree Helix, Center Cutting. Solid Carbide End Mills. [See More]
- Coating: Coated; Aluminum Titanium Nitride
- Cutting Ends: Single
- Geometry: Square
- Units: Fractional
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . 1-1/2 in Standard Length AlTiN coated Carbide end mill. [See More]
- Coating: Coated; Aluminum Titanium Nitride; AlTiN
- Cutter: 0.031
- Geometry: Ballnose
- OAL: 1.50
from SwiftCARB
Six flute finishing end mills, single end- 60 ° helix [See More]
- Coating: Coated; Aluminum Titanium Nitride
- Cutting Ends: Single
- Geometry: Square; Radius (optional feature)
- Units: Fractional
from Melin Tool Company
MVB SERIES - SPHERICAL BALL END AlTiN COATED, 2 AND 4 FLUTE. High performance ball nose plus end mills are used in the mold industry and have a full 220 degree arc cutting capability. Tools are stocked with a coating to optimize cutting performance. Made from premium submicron grain carbide. [See More]
- Coating: Coated; Aluminum Titanium Nitride
- Cutting Ends: Single
- Geometry: Ballnose
- Units: Fractional
from Contour360º
4 Flute, 30 Degree Helix, Center Cutting. Solid Carbide End Mills. [See More]
- Coating: Coated; Aluminum Titanium Nitride
- Cutting Ends: Single
- Geometry: Square
- Units: Fractional
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . 1-1/2 in Standard Length AlTiN coated Carbide end mill. [See More]
- Coating: Coated; Aluminum Titanium Nitride; AlTiN
- Cutter: 0.031
- Geometry: Ballnose
- OAL: 1.50
from Melin Tool Company
Helix changes along flutes. Increased stability during cutting action. Substantial increases in speed. Small corner radius for added strength and smoother cutting action. AlTiN coated for improved tool life and. increased production output. 3/8 ” and larger avaiable with shank flat. Made from... [See More]
- Coating: Coated; Aluminum Titanium Nitride
- Cutting Ends: Single
- Geometry: Radius
- Units: Fractional
from Contour360º
Reduce roughing and finishing cycle time. Achieve superior surface finish at high feed rates. Increased metal removal rates due to heavier chipload. Designed for: Titanium • Stainless steel • Inconel • Cast iron • Carbon steels • High temp alloys. [See More]
- Coating: Coated; Aluminum Titanium Nitride
- Cutting Ends: Single
- Geometry: Ballnose
- Units: Fractional
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . 2-1/4 in Long Length AlTiN coated Carbide end mill. [See More]
- Coating: Coated; Aluminum Titanium Nitride; AlTiN
- Cutter: 0.126
- Geometry: Ballnose
- Shank: 0.125
from Melin Tool Company
Helix changes along flutes. For radius and contouring part surface. AlTiN coated for improved tool life and increased production output. Made from premium submicron grain carbide. [See More]
- Coating: Coated; Aluminum Titanium Nitride
- Cutting Ends: Single
- Geometry: Ballnose
- Units: Fractional
from Contour360º
Reduce roughing and finishing cycle time. Achieve superior surface finish at high feed rates. Increased metal removal rates due to heavier chipload. Designed for: Titanium • Stainless steel • Inconel • Cast iron • Carbon steels • High temp alloys. [See More]
- Coating: Coated; Aluminum Titanium Nitride
- Cutting Ends: Single
- Geometry: Radius
- Units: Metric
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . 2-1/4 in Long Length AlTiN coated Carbide end mill. [See More]
- Coating: Coated; Aluminum Titanium Nitride; AlTiN
- Cutter: 0.126
- Geometry: Ballnose
- Shank: 0.125
from Melin Tool Company
Helix changes along flutes. Small corner radius for added strength and smoother cutting action. AlTiN coated for improved tool life and increased production output. Made from premium submicron grain carbide. [See More]
- Coating: Coated; Aluminum Titanium Nitride
- Cutting Ends: Single
- Geometry: Radius
- Units: Fractional
from Contour360º
Reduce roughing and finishing cycle time. Achieve superior surface finish at high feed rates. Increased metal removal rates due to heavier chipload. Designed for: Titanium • Stainless steel • Inconel • Cast iron • Carbon steels • High temp alloys. [See More]
- Coating: Coated; Aluminum Titanium Nitride
- Cutting Ends: Single
- Geometry: Radius
- Units: Fractional
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . 3 in Extra Long Length AlTiN coated Carbide end mill. [See More]
- Coating: Coated; Aluminum Titanium Nitride; AlTiN
- Cutter: 0.126
- Geometry: Ballnose
- Shank: 0.125
from Melin Tool Company
Helix changes along flutes. Increased stability during cutting action. Substantial increases in speed. Small chamfer for added strength and smoother cutting action. AlTiN coated for improved tool life and increased production output. 3/8 ” and larger avaiable with shank flat. Made from premium... [See More]
- Coating: Coated; Aluminum Titanium Nitride
- Cutting Ends: Single
- Geometry: Chamfer
- Units: Fractional
from Contour360º
Reduce finishing cycle time. Achieve superior surface finish at high feed rates. Increased metal removal rates due to heavier chipload. Designed for: Titanium • Stainless steel • Inconel • Cast iron. • Carbon steels • High temp alloys. [See More]
- Coating: Coated; Aluminum Titanium Nitride
- Cutting Ends: Single
- Geometry: Radius
- Units: Fractional
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . 3 in Extra Long Length AlTiN coated Carbide end mill. [See More]
- Coating: Coated; Aluminum Titanium Nitride; AlTiN
- Cutter: 0.126
- Geometry: Ballnose
- Shank: 0.125
from Melin Tool Company
AlTiN coated for increased tool life or nACo coated for hardened steel. High performance ball nose plus end mills are used in the mold industry and have a full 220 degree arc cutting capability. Tools are stocked with a coating to optimize cutting performance. Made from premium submicron grain... [See More]
- Coating: Coated; Aluminum Titanium Nitride
- Cutting Ends: Single
- Geometry: Ballnose
- Units: Metric
from Contour360º
Reduce roughing and finishing cycle time. Achieve superior surface finish at high feed rates. Increased metal removal rates due to heavier chipload. Designed for: Titanium • Stainless steel • Inconel • Cast iron • Carbon steels • High temp alloys. [See More]
- Coating: Coated; Aluminum Titanium Nitride
- Cutting Ends: Single
- Geometry: Square
- Units: Fractional
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . This end mill has a corner radius of 0.5 mm and is AlTiN coated. [See More]
- Coating: Coated; Aluminum Titanium Nitride; AlTiN
- Shank: 0.118
- Cutter: 0.118
- OAL: 1.97
from Melin Tool Company
Helix changes along flutes. Increased stability during cutting action and substantial increases in speed. Small corner radius for added strength and smoother cutting action. AlTiN coated for improved tool life and increased production output. [See More]
- Coating: Coated; Aluminum Titanium Nitride
- Cutting Ends: Single
- Geometry: Radius
- Units: Metric
from Contour360º
Reduce finishing cycle time. Achieve superior surface finish at high feed rates. Increased metal removal rates due to heavier chipload. Designed for: Titanium • Stainless steel • Inconel • Cast iron. • Carbon steels • High temp alloys. [See More]
- Coating: Coated; Aluminum Titanium Nitride
- Cutting Ends: Single
- Geometry: Square
- Units: Fractional
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . This end mill has a corner radius of .75 mm and is AlTiN coated. [See More]
- Coating: Coated; Aluminum Titanium Nitride; AlTiN
- Shank: 0.236
- Cutter: 0.118
- OAL: 2.56
from Melin Tool Company
Helix changes along flutes. Increased stability during cutting action and substantial increases in speed. Small chamfer for added strength and smoother cutting action. AlTiN coated for improved tool life and increased production output. [See More]
- Coating: Coated; Aluminum Titanium Nitride
- Cutting Ends: Single
- Geometry: Square
- Units: Metric
from Contour360º
2 and 4 Flute, 30 Degree Helix, Center Cutting. Solid Carbide End Mills. [See More]
- Coating: Coated; Aluminum Titanium Nitride
- Cutting Ends: Single
- Geometry: Ballnose
- Units: Fractional
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . This end mill has a corner radius of .030 in and is AlTiN coated. [See More]
- Coating: Coated; Aluminum Titanium Nitride; AlTiN
- Shank: 0.188
- Cutter: 0.126
- OAL: 3.00
from Melin Tool Company
Helix changes along flutes. Increased stability during cutting action. Small corner radius for added strength and smoother cutting action. AlTiN coated for improved tool life and increased production output. [See More]
- Coating: Coated; Aluminum Titanium Nitride
- Cutting Ends: Single
- Geometry: Square
- Units: Fractional
from Contour360º
2 and 4 Flute, 30 Degree Helix, Center Cutting. Solid Carbide End Mills. [See More]
- Coating: Coated; Aluminum Titanium Nitride
- Cutting Ends: Single
- Geometry: Square
- Units: Fractional
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . This end mill has a corner radius of 1.5 mm and is AlTiN coated. [See More]
- Coating: Coated; Aluminum Titanium Nitride; AlTiN
- Shank: 0.236
- Cutter: 0.276
- OAL: 3.94
from Melin Tool Company
Helix changes along flutes. Increased stability during cutting action. Small corner radius for added strength and smoother cutting action. AlTiN coated for improved tool life and increased production output. [See More]
- Coating: Coated; Aluminum Titanium Nitride
- Cutting Ends: Single
- Geometry: Radius
- Units: Fractional
from Contour360º
2 and 4 Flute, 30 Degree Helix, Center Cutting. Solid Carbide End Mills. [See More]
- Coating: Coated; Aluminum Titanium Nitride
- Cutting Ends: Single
- Geometry: Radius
- Units: Fractional
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . This end mill has a corner radius of .010 in and is AlTiN coated. [See More]
- Coating: Coated; Aluminum Titanium Nitride; AlTiN
- Shank: 0.250
- Cutter: 0.252
- OAL: 2.50
from Contour360º
2 and 4 Flute, 30 Degree Helix, Center Cutting. Solid Carbide End Mills. [See More]
- Coating: Coated; Aluminum Titanium Nitride
- Cutting Ends: Single
- Geometry: Square
- Units: Fractional
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . This end mill has a corner radius of .010 in and is AlTiN coated. [See More]
- Coating: Coated; Aluminum Titanium Nitride; AlTiN
- Shank: 0.188
- Cutter: 0.189
- OAL: 4.00
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . 4.00 in AlTiN coated Solid Carbide end mill. [See More]
- Coating: Coated; Aluminum Titanium Nitride; AlTiN
- Cutter: 0.752
- Geometry: Square
- Shank: 0.750
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . 2.000 in AlTiN coated Carbide end mill. Centre Cutting, Dry or Semi-Dry Machining, Heavy Core, Sharp Corners [See More]
- Coating: Coated; Aluminum Titanium Nitride; AlTiN
- Cutter: 0.189
- Geometry: Square
- Shank: 0.188
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . 2.000 in AlTiN coated Carbide end mill. Centre Cutting, Sharp Corners, Dry or Semi-Dry Machining [See More]
- Coating: Coated; Aluminum Titanium Nitride; AlTiN
- Cutter: 0.189
- Geometry: Square
- Shank: 0.188
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . 1.500 in AlTiN coated Carbide end mill. [See More]
- Coating: Coated; Aluminum Titanium Nitride; AlTiN
- Cutter: 0.031
- Geometry: Square
- OAL: 1.50
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . 2.500 in AlTiN coated Carbide end mill. [See More]
- Coating: Coated; Aluminum Titanium Nitride; AlTiN
- Cutter: 0.311
- Geometry: Square
- OAL: 2.50
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . 2.250 in AlTiN coated Carbide end mill. [See More]
- Coating: Coated; Aluminum Titanium Nitride; AlTiN
- Cutter: 0.126
- Geometry: Square
- OAL: 2.25
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . 3.000 in AlTiN coated Carbide end mill. [See More]
- Coating: Coated; Aluminum Titanium Nitride; AlTiN
- Cutter: 0.126
- Geometry: Square
- OAL: 3.00
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . 3.000 in AlTiN coated Carbide end mill. [See More]
- Coating: Coated; Aluminum Titanium Nitride; AlTiN
- Cutter: 0.126
- Geometry: Square
- OAL: 3.00
from Reid Supply
Reid Supply has a range of ball end mills, square end mills, corner radius end mills, roughing end mills and more. . 1.500 in AlTiN coated Carbide end mill. [See More]
- Coating: Coated; Aluminum Titanium Nitride; AlTiN
- Cutter: 0.063
- Geometry: Square
- OAL: 1.50