Stainless Steel Sprayers and Spray Coating Equipment
from TNA Solutions Pty. Ltd.
The NID supra-finSTO 3 offers accurate oil coating for jelly and gum-based confectioneries – providing an appealing glaze and greater depth of colour for a superior finish. With an output of up to 2,200 kg/hr (4,850 lbs/hr), the NID supra-finSTO 3 enables continuous flow oiling in a... [See More]
- Materials of Construction: Stainless
- Power Source: Electric
- Equipment Type: Outfit or Complete System
- Automation / Control: Automatic
from TNA Solutions Pty. Ltd.
The tna intelli-flav ® OMS 5.1 is a next-generation on-machine seasoning (OMS) system that provides both powder flavouring and liquid oil in a single drum, to deliver consistent coverage and flavour to a variety of products. Designed to IP65 standards, it meets even the highest hygiene and... [See More]
- Materials of Construction: Stainless
- Options / Components: Conveyor or Part Loader; Feeder / Metering Unit
- Equipment Type: Outfit or Complete System
- Power Source: Electric
from PVA - Precision Valve & Automation
The MCCS-SYS-1 is a turnkey manual conformal coating system that utilizes a spray valve and dispense valve to selectively apply coatings to a circuit board. With an all stainless steel and Teflon construction this system can be used to hand le a wide variety of fluid chemistries. With this sealed... [See More]
- Materials of Construction: Stainless
- Options / Components: Applicator / Gun
- Equipment Type: Outfit or Complete System
- Spray Technology: Airless
from Carlisle
Name: Model 7. Part Number: 6100. Gun Category: Conventional. Gun Type: Manual. Fluid Passages: Stainless Steel. Fluid Inlets: 3/8" NPS (m). Air Inlet: 1/4" NPS (m). Weight: 28 pz. Construction: Drop-Forged Aluminum. Colors: Black [See More]
- Materials of Construction: Steel / Aluminum; Stainless
- Options / Components: Applicator / Gun
- Equipment Type: Component or Sub-system
- Spray Technology: Air Assisted
from Nordson Corporation
Accommodates pipe diameter .5-26", tube 3/8-26", high quality finish [See More]
- Materials of Construction: Steel / Aluminum; Stainless
- Options / Components: Applicator / Gun; Dust Collection or Air Filtration System; Feeder / Metering Unit; Pressure Tank, Pot or Hopper; Pump / Compressor; Media Separator or Reclaimer; Booth for Continuous Part Flow
- Equipment Type: Outfit or Complete System
- Spray Technology: Airless
from Cat Pumps - High Pressure Pumps & Systems
Industrial dump gun with lance eliminates the need for a regulator or unloader valve. Directs flow to outer low pressure lance when gun is shut-off, thus eliminating pressure spikes to the pump. Also acts as a weep gun to prevent freezing. Lance length 25"(635mm) [See More]
- Materials of Construction: Stainless; Plastic; Brass
- Options / Components: Applicator / Gun
- Equipment Type: Component or Sub-system
- Fluid Pressure: 0.0 to 3000
from Carlisle
Name: Model 7D. Part Number: 6101. Gun Category: Conventional. Gun Type: Manual. Fluid Passages: Plated Brass. Fluid Inlets: 1/2" NPS (m). Air Inlet: 1/4" NPS (m). Weight: 1 lb. 14 oz. Construction: Drop-Forged Aluminum. Colors: Black [See More]
- Materials of Construction: Steel / Aluminum; Stainless
- Options / Components: Applicator / Gun
- Equipment Type: Component or Sub-system
- Spray Technology: Air Assisted
from Cat Pumps - High Pressure Pumps & Systems
High pressure shut-off gun with contour design and smooth trigger action reduces operator fatigue. Unique valve design permits a gradual pull on the trigger for gradual build up of pressure. Special safety-lock prevents unintentional operation. Stainless steel seat and ball assembly assures... [See More]
- Materials of Construction: Stainless; Plastic; Brass
- Options / Components: Applicator / Gun
- Equipment Type: Component or Sub-system
- Fluid Pressure: 0.0 to 7250
from Carlisle
Designed for spraying heavy bodied fluids such as roof coatings, block fillers, and similar materials, the Model 7E2 has extra large fluid passages in a plated drop-forged brass head. It features adjustable floating needle valves and stainless steel air valve cartridges. It has a hardened steel four... [See More]
- Materials of Construction: Steel / Aluminum; Stainless
- Options / Components: Applicator / Gun
- Equipment Type: Component or Sub-system
- Spray Technology: Air Assisted
from Cat Pumps - High Pressure Pumps & Systems
High pressure shut-off gun with 24" lance. Unique valve design permits a gradual pull on the trigger for gradual build up of pressure. Fully adjustable front grip for comfort and safety. Special safety-lock prevents unintentional operation. Stainless steel seat and ball assembly assures thousands of... [See More]
- Materials of Construction: Stainless; Plastic; Brass
- Options / Components: Applicator / Gun
- Equipment Type: Component or Sub-system
- Fluid Pressure: 0.0 to 7250
from Carlisle
Model 95 is a high production spray gun that can be used with most coatings. It provides superior performance and efficiency. The spray gun features all stainless steel fluid passages, 60 Series air and fluid nozzles, an extra wide trigger, large control knobs, and an ergonomic forged aluminum body. [See More]
- Materials of Construction: Steel / Aluminum; Stainless
- Options / Components: Applicator / Gun
- Equipment Type: Component or Sub-system
- Spray Technology: Air Assisted
from Cat Pumps - High Pressure Pumps & Systems
High pressure shut-off gun ergonomically constructed for smooth trigger action reducing operator fatique. Special safety-lock prevents unintentional operation. Stainless steel seat and ball assembly assures thousands of continuous cycles [See More]
- Materials of Construction: Stainless; Plastic; Brass
- Options / Components: Applicator / Gun
- Equipment Type: Component or Sub-system
- Fluid Pressure: 0.0 to 1750
from Carlisle
Name: Model 95G. Part Number: 6119. Gun Category: Conventional. Gun Type: Gravity Feed. Fluid Passages: Stainless Steel. Air Inlet: 1/4 NPS (m). Construction: Drop-Forged Aluminum. Cups: 1 Liter Aluminum Gravity Cup (54-4720). Colors: Black [See More]
- Materials of Construction: Steel / Aluminum; Stainless
- Options / Components: Applicator / Gun
- Equipment Type: Component or Sub-system
- Spray Technology: Air Assisted
from Cat Pumps - High Pressure Pumps & Systems
High pressure shut-off gun ergonomically constructed for smooth trigger action reducing operator fatique. Special safety-lock prevents unintentional operation. Stainless steel seat and ball assembly assures thousands of continuous cycles [See More]
- Materials of Construction: Stainless; Plastic; Brass
- Options / Components: Applicator / Gun
- Equipment Type: Component or Sub-system
- Fluid Pressure: 0.0 to 2900
from Carlisle
Name: Model 21. Part Number: 6220. Gun Category: Conventional. Gun Type: Automatic. Fluid Passages: Brass/Electroless nickel plated. Fluid Inlets: 3/8" NPS (m). Max. Pressure: 100 PSI/6.8 Bar. Air Inlet: 1/4" NPS (m). Cylinder Air Inlet: 1/4" NPS (m). Weight: 41 oz. Construction: Drop-Forged Steel. [See More]
- Materials of Construction: Steel / Aluminum; Stainless
- Options / Components: Applicator / Gun
- Equipment Type: Component or Sub-system
- Spray Technology: Air Assisted
from Cat Pumps - High Pressure Pumps & Systems
High pressure shut-off gun ergonomically constructed design for smooth trigger action reducing operator fatigue. Lightweight, shockproof body and trigger. Special safety-lock prevents unintentional operation. Stainless steel seat and ball assembly assures thousands of continuous cycles. [See More]
- Materials of Construction: Stainless; Plastic; Brass
- Options / Components: Applicator / Gun
- Equipment Type: Component or Sub-system
- Fluid Pressure: 0.0 to 3000
from Carlisle
Name: Model 460. Part Number: 6401. Gun Category: Conventional. Gun Type: Automatic. Fluid Passages: Stainless Steel. Fluid Inlets: 1/4" NPS (m). Air Inlet: 1/4" NPS (m). Weight: 6 oz. Construction: Drop-Forged Aluminum. Colors: Silver [See More]
- Materials of Construction: Steel / Aluminum; Stainless
- Options / Components: Applicator / Gun
- Equipment Type: Component or Sub-system
- Spray Technology: Air Assisted
from Cat Pumps - High Pressure Pumps & Systems
High pressure "weep" shut-off gun ergonomically constructed design for smooth trigger action reducing operator fatigue. Easily identified with blue safety latch. Special safety-lock prevents unintentional operation. Stainless steel seat and ball assembly assures thousands of continuous cycles. [See More]
- Materials of Construction: Stainless; Plastic; Brass
- Options / Components: Applicator / Gun
- Equipment Type: Component or Sub-system
- Fluid Pressure: 0.0 to 3000
from Carlisle
Name: Model 603. Part Number: 6473. Gun Category: Conventional. Gun Type: Automatic. Fluid Inlets: 3/8" NPS (m). Max. Pressure: 100 PSI/6.8 Bar. Air Inlet: 1/4" NPS (m) Cylinder. Air Inlet: 1/4" NPS (m). Weight: 15 oz. Construction: Drop-Forged Aluminum. Colors: Graphite [See More]
- Materials of Construction: Steel / Aluminum; Stainless
- Options / Components: Applicator / Gun
- Equipment Type: Component or Sub-system
- Spray Technology: Air Assisted
from Cat Pumps - High Pressure Pumps & Systems
Industrial horizontal shut-off gun with flow through design and balanced trigger. Ergonomic construction with smooth trigger action reducing operator fatigue. Special safety lock to prevent unintentional operation. Stainless steel seat and ball assures thousands of continuous cycles. [See More]
- Materials of Construction: Stainless; Plastic; Brass
- Options / Components: Applicator / Gun
- Equipment Type: Component or Sub-system
- Fluid Pressure: 0.0 to 4000
from Carlisle
Name: Model 550. Part Number: 6700. Gun Category: Conventional. Gun Type: Airless Automatic. Fluid Passages: Stainless Steel. Fluid Inlets: 1/4" NPS (m). Max. Pressure: 3000 PSI. Air Inlet: 1/4" NPS (m). Weight: 1.5 lbs. Construction: Drop-Forged Aluminum. Colors: Silver [See More]
- Materials of Construction: Steel / Aluminum; Stainless
- Options / Components: Applicator / Gun
- Equipment Type: Component or Sub-system
- Spray Technology: Airless
from Cat Pumps - High Pressure Pumps & Systems
Industrial horizontal shut-off gun with flow through design and balanced trigger. Ergonomic construction with smooth trigger action reducing operator fatigue. Special safety lock to prevent unintentional operation. Stainless steel seat and ball assures thousands of continuous cycles. [See More]
- Materials of Construction: Stainless; Plastic; Brass
- Options / Components: Applicator / Gun
- Equipment Type: Component or Sub-system
- Fluid Pressure: 0.0 to 4500
from Carlisle
Name: MAG HVLP. Part Number(s): 4006, 4007, 4008. Gun Category: HVLP. Gun Type: Automatic. Fluid Passages: Stainless Steel. Fluid Inlets: 1/4 ” NPT (F). Max. Pressure: 100 PSI/6.8 Bar. Atomizing Air Inlet: 1/4" NPS (M). Cylinder Air Inlet: 1/8" NPT (F). Fan Air Inlet: 1/4" NPS (M). [See More]
- Materials of Construction: Steel / Aluminum; Stainless
- Options / Components: Applicator / Gun; Dust Collection or Air Filtration System
- Equipment Type: Component or Sub-system
- Spray Technology: HVLP
from Cat Pumps - High Pressure Pumps & Systems
Pressure Compensating shut-off gun with unique valve design. Ergonomic construction with smooth trigger action reducing operator fatigue. Special safety lock to prevent unintentional operation. Stainless steel seat and ball assures thousands of continuous cycles. [See More]
- Materials of Construction: Stainless; Plastic; Brass
- Options / Components: Applicator / Gun
- Equipment Type: Component or Sub-system
- Fluid Pressure: 0.0 to 5100