Alumina / Aluminum Oxide Dielectric Ceramics and Substrates
from 3X Ceramic Parts Company Limited
99 Al2O3 99.7 Alumina Ceramic Holed Plate. Alumina Ceramic Holed plate forming way is isostatic pressing which with higher density , zero porosity . The holes are machined by cnc machining . We could reach high tolerance for machining such type of alumina ceramic plate , as fine as 0.005mm. It is... [See More]
- Material Type: Alumina
- Dielectric Constant: 9 to 9.6
- Dielectric Strength: 8.30E6 to 8.70E6
- CTE: 7.9 to 8.5
from Knowles Precision Devices
High-K substrates are used for circuit miniaturization. DLI offers complete fabrication services! [See More]
- Material Type: Alumina; Aluminum Nitride; Quartz; Silicate / Clay
- Length: 1 to 4
- Shape / Form: BarStock
- Width / OD: 1 to 4
from 3X Ceramic Parts Company Limited
Alumina Ceramic Insulator Description : Alumina is the most cost effective and widely used material in the family of engineering ceramics. The raw materials from which this high performance technical grade ceramic is made are readily available and reasonably priced, resulting in good value for the... [See More]
- Material Type: Alumina
- Loss Tangent: 2.00E-4 to 0.0011
- Dielectric Constant: 9 to 9.8
- Shape / Form: Custom Shape
from 3X Ceramic Parts Company Limited
High Precision Machining Zirconia Cermaic or 99% Alumina Ceramic Ball Valve Seat. Besides some advantages of metal valve, ceramic ball valve seat can also resist corrosion, high temperature,wear and erosion.Ceramic Ball Seat can be used in different kinds of acids bases and salts gas, liquid,stream... [See More]
- Material Type: Alumina; Zirconia
- Dielectric Constant: 6 to 12
- Dielectric Strength: 5.00E6 to 4.00E7
- CTE: 3.2 to 10
from 3X Ceramic Parts Company Limited
3X Ceramic Parts Company provide different material of Ceramic Guide Pin: Silicone Nitride Guide Pin, Welding Pin. Nano Zirconia blue ceramic guide pin , raw material imported from Germany. China produced Blue Zirconia Ceramic material. ZTA material. White Zirconia Ceramic material. Alumina Ceramic... [See More]
- Material Type: Alumina; Silicon Nitride; Zirconia
- Compressive Strength: 362592 to 565644
- Dielectric Strength: 2.00E7 to 3.00E7
from 3X Ceramic Parts Company Limited
Ceramic Plunger Description : Our ceramic plungers are made of high quality imported raw materials, cold isostatic pressing forming way , and assembled with stainless steel metal parts after high temperature sintering. As one of the main components of the plunger pump, the ceramic plunger is matched... [See More]
- Material Type: Alumina; Zirconia
- Shape / Form: Custom Shape
- Dielectric Strength: 7.87E6 to 8.86E6
- Density: 2.4 to 3.95
from OMEGA Engineering, Inc.
OMEGATITE ®650 is an alloy of silicon nitride and aluminum oxide. This superior refractory material has the combined properties of silicon nitride (high strength, hardness, fracture toughness, and low thermal expansion) and aluminum oxide (corrosion resistance, chemically inert, high temperature... [See More]
- Material Type: Alumina; Mullite (optional feature); Silicon Nitride
- Length: 5.91 to 23.62
- Shape / Form: Tube
- Width / OD: 0.4921 to 1.1
from Kyocera Corporation
The most widely used and best-known fine ceramic material. Good mechanical strength, electrical insulation, high-frequency loss, thermal conductivity, and resistance to heat, wear and corrosion. Sapphire is single-crystal alumina. [See More]
- Material Type: Alumina
- Max Use Temperature: 800 to 1000
- Shape / Form: Custom Shape (optional feature); WaferSubstrate (optional feature); Tube (optional feature); Hollow Stock (Tube, Pipe, Column) (optional feature)
- Thermal Conductivity: 18
from San Jose Delta Associates, Inc.
San Jose Delta maintains an in-house inventory of most grades of alumina ceramics as BARS-RODS-TUBES and SHEETS. The availability of fired “grinding stock ” ceramic makes the production of small quantity and prototype orders less costly and offers shorter lead-times. For larger... [See More]
- Material Type: Alumina
- Dielectric Constant: 8.6
- Dielectric Strength: 223 to 350
- Shape / Form: BarStock; Custom Shape; Rod; Tube
from Accuratus Corporation
Accuratus maintains an inventory of standard extruded and cast aluminum oxide, mullite and sialon shapes for fast delivery requirements. These are low cost, quality rods and tubes that can be quickly cut to precision lengths. (See Mullite Sizes, Aluminum Oxide Sizes and Sialon Sizes). Accuratus will... [See More]
- Material Type: Alumina
- Dielectric Constant: 9 to 9.8
- Dielectric Strength: 14.6 to 1.69E7
- Resistivity: 1.00E14
from Superior Technical Ceramics Corp.
Plate sizes can be made to various thicknesses. Standard thicknesses are .125", .250", .375", .500", .625", .750", and 1.00". Not all plates can be made to the thicknesses listed above. Please contact us for the maximum thickness that can be manufactured for your desired plate size. [See More]
- Material Type: Alumina
- Length: 2.11
- Shape / Form: Plate / Board
- Width / OD: 2.11
from NIKKO Company
Features Easy to achieve high number of layers Fine Line, small diameter via capabilities Various layer thicknesses available Capable of offering a Cavity structure Capable of creating surface resistors with trimming options Low resistance conductor material available for internal and surface... [See More]
- Material Type: Alumina
from Accuratus Corporation
Alumina is the most cost effective and widely used material in the family of engineering ceramics. The raw materials from which this high performance technical grade ceramic is made are readily available and reasonably priced, resulting in good value for the cost in fabricated alumina shapes. With... [See More]
- Material Type: Alumina
- Shape / Form: Custom Shape