Analog Electronic Development Boards
from DigiKey
FSLP - Touch, Resistive (Force) Sensor Evaluation Board [See More]
- Signal Type: Analog
- Manufacturer: INTERLINK ELECTRONICS; Other
from ASAP Semiconductor LLC
DEVELOPMENT PLATFORM DSP-CODEC Interface Analog Front End (AFE) - TIs EVM-Evaluation Modules [See More]
- Signal Type: Analog
- Category: Developement Board
from Nordic Semiconductor ASA
The nRF5340 DK is the development kit for the , containing everything needed to get started with development, on a single board. The DK supports development with an extensive range of wireless protocols. It supports Bluetooth Low Energy with features such as high-throughput 2 Mbps, Advertising... [See More]
- Signal Type: Analog; Digital
- Development Tool: Debugger / Debug Probe
- Category: Development Suite / Kit
- Supported System: Wireless Systems
from Infineon Technologies AG
Evaluation board - audio board using highly power efficient analog input multilevel MERUS ™ class D amplifier IC MA12040. This audio evaluation kit contains all hardware and software elements that are needed to evaluate the highly power efficient MERUS ™ analog input multilevel class D... [See More]
- Signal Type: Analog
- Supported System: Consumer
- Category: Developement Board
from DigiKey
KXTC9-2050 - Accelerometer, 3 Axis Sensor Evaluation Board [See More]
- Signal Type: Analog
- Manufacturer: KIONIX INC.; Other
from Nordic Semiconductor ASA
The nRF5340 Preview Development Kit (PDK) has been replaced by the . The nRF5340 PDK is the preview development kit for the , containing everything needed to get started with development, on a single board. The PDK supports development with an extensive range of wireless protocols. It supports... [See More]
- Signal Type: Analog; Digital
- Development Tool: Debugger / Debug Probe
- Category: Development Suite / Kit
- Supported System: Wireless Systems
from Infineon Technologies AG
Evaluation board - audio board using highly power efficient analog-input multilevel MERUS ™ class D amplifier IC MA12070. The audio evaluation kit contains all hardware and software elements that are needed to evaluate the highly power efficient MERUS ™ analog input multilevel class D... [See More]
- Signal Type: Analog
- Supported System: Consumer
- Category: Developement Board
from DigiKey
KXTC9-2050 - Accelerometer, 3 Axis Sensor Evaluation Board [See More]
- Signal Type: Analog
- Manufacturer: KIONIX INC.; Other
from Nordic Semiconductor ASA
The Power Profiler Kit II (PPK2) is a standalone unit, which can measure and optionally supply currents all the way from sub-uA and as high as 1A on all Nordic DKs, in addition to external hardware. The PPK2 is powered via a standard 5V USB cable, which can supply up to 500mA of current. In order to... [See More]
- Signal Type: Analog; Digital
- Category: Development Suite / Kit
from Infineon Technologies AG
Reference board – audio board using highly power efficient analog input multilevel MERUS ™ class D amplifier IC MA12040. This board is a size optimized implementation example for the highly power efficient MERUS ™ analog input multilevel class D amplifier IC 2x40 W (MA12040). The... [See More]
- Signal Type: Analog
- Supported System: Consumer
- Category: Developement Board
from DigiKey
KXSS5-2057 - Accelerometer, 3 Axis Sensor Evaluation Board [See More]
- Signal Type: Analog; Digital
- Manufacturer: KIONIX INC.; Other
from Infineon Technologies AG
Reference board – audio board using highly power efficient analog input multilevel MERUS ™ class D amplifier IC MA12070. This board is a size optimized implementation example for the highly power efficient MERUS ™ analog input multilevel class D amplifier IC 2x80 W (MA12070) The IC... [See More]
- Signal Type: Analog
- Supported System: Consumer
- Category: Developement Board
from DigiKey
KXRB5-2050 - Accelerometer, 3 Axis Sensor Evaluation Board [See More]
- Signal Type: Analog
- Manufacturer: KIONIX INC.; Other
from DigiKey
KXR94-2050 - Accelerometer, 3 Axis Sensor Evaluation Board [See More]
- Signal Type: Analog
- Manufacturer: KIONIX INC.; Other
from DigiKey
KXR94-2283 - Accelerometer, 3 Axis Sensor Evaluation Board [See More]
- Signal Type: Analog
- Manufacturer: KIONIX INC.; Other
from DigiKey
KXD94-2082 - Accelerometer, 3 Axis Sensor Evaluation Board [See More]
- Signal Type: Analog
- Manufacturer: KIONIX INC.; Other
from DigiKey
MXR9150MZ - Accelerometer, 3 Axis Sensor Evaluation Board [See More]
- Signal Type: Analog
- Manufacturer: MEMSIC INC.; Other
from DigiKey
MXR7305VF - Accelerometer, 2 Axis Sensor Evaluation Board [See More]
- Signal Type: Analog
- Manufacturer: MEMSIC INC.; Other
from DigiKey
MXA2500EL - Accelerometer, 2 Axis Sensor Evaluation Board [See More]
- Signal Type: Analog
- Manufacturer: MEMSIC INC.; Other
from DigiKey
MXR2999EL - Accelerometer, 2 Axis Sensor Evaluation Board [See More]
- Signal Type: Analog
- Manufacturer: MEMSIC INC.; Other
from DigiKey
MXR7900CF - Accelerometer, 2 Axis Sensor Evaluation Board [See More]
- Signal Type: Analog
- Manufacturer: MEMSIC INC.; Other
from DigiKey
ADXL330 - Accelerometer, 3 Axis Sensor Evaluation Board [See More]
- Signal Type: Analog
- Manufacturer: MIKROELEKTRONIKA; Other
from DigiKey
LX1970 - Light, Current Output Sensor Evaluation Board [See More]
- Signal Type: Analog
- Manufacturer: Microchip (PIC®)
from DigiKey
ADXL326 iMEMS ® Accelerometer, 3 Axis Sensor Evaluation Board [See More]
- Signal Type: Analog
- Manufacturer: ADAFRUIT INDUSTRIES LLC; Other
from DigiKey
GA1A12S202 - Light, Ambient Sensor Evaluation Board [See More]
- Signal Type: Analog
- Manufacturer: ADAFRUIT INDUSTRIES LLC; Other
from DigiKey
ADXL377 - Accelerometer, 3 Axis Sensor Evaluation Board [See More]
- Signal Type: Analog
- Manufacturer: ADAFRUIT INDUSTRIES LLC; Other
from DigiKey
ADXL335 - Accelerometer, 3 Axis Sensor Evaluation Board [See More]
- Signal Type: Analog
- Manufacturer: ADAFRUIT INDUSTRIES LLC; Other
from DigiKey
GUVA-S12SD - Light, Ultraviolet (UV) Sensor Evaluation Board [See More]
- Signal Type: Analog
- Manufacturer: ADAFRUIT INDUSTRIES LLC; Other
from DigiKey
ALS-PT19 - Light, Ambient Sensor Evaluation Board [See More]
- Signal Type: Analog
- Manufacturer: ADAFRUIT INDUSTRIES LLC; Other
from DigiKey
GP2Y1014AU0F - Dust Sensor Evaluation Board [See More]
- Signal Type: Analog
- Manufacturer: ADAFRUIT INDUSTRIES LLC; Other
from DigiKey
ACS712 - Current Sensor Sensor Evaluation Board [See More]
- Signal Type: Analog
- Manufacturer: SPARKFUN ELECTRONICS; Other
from DigiKey
ADXL335 - Accelerometer, 3 Axis Sensor Evaluation Board [See More]
- Signal Type: Analog
- Manufacturer: SPARKFUN ELECTRONICS; Other
from DigiKey
ADXL193 iMEMS ® Accelerometer, 1 Axis Sensor Evaluation Board [See More]
- Signal Type: Analog
- Manufacturer: SPARKFUN ELECTRONICS; Other
from ams Sensors Germany GmbH
SDK MTCS-INT-EBx sensor board with True Color sensor and current/charge converter, SPI interface to base board and USB connection to PC, with testing software. MAZeT MMCS Multiple Color Sensors have six bandpasses in the visible wavelength range. In addition to color measurement, spectral analyses... [See More]
- Signal Type: Analog
- Development Tool: Break Out Board
- Category: Development Suite / Kit
- Bus Width: 32-Bit
from Power Amp Design
The assembled evaluation kit includes a PCB, current limit resistor selection, terminal strips, bypass capacitors, protection diodes, cage jacks (pin sockets), bumpons and BNC input signal jack. The PCB can be mounted to a 35mm DIN rail using the included adaptors. The PCB includes sockets to... [See More]
- Signal Type: Analog
- Development Tool: Circuit Emulator
- Category: Development Suite / Kit
- Supported System: Operational Amplifier
from ProMik Gmbh (Seattle Field Office)
The PA2012 is ProMik's latest fully automated programming machine. The PA2012 is characterized by high production throughput, advanced device handling and best in the market 3D Co-planarity & 2D linearity lead inspection features. [See More]
- Signal Type: Analog; Digital
- Development Tool: Break Out Board
- Category: Development Suite / Kit
- Supported System: Flash Memory
from Red Pitaya, d.o.o.
SDRlab 122-16 External clock is based on the SDRlab 122-16 model that is modified to be used with an external clock oscillator, which is important especially for RF applications that operate at other frequencies, require better quality clock or clock synchronization. [See More]
- Signal Type: Analog; Digital
- Development Tool: Debugger / Debug Probe
- Category: Developement Board; Development Suite / Kit; Development Software
- Bus Width: 16-Bit; 16-bit; Other
from Synapse Wireless
The SN111 End Device provides a latching relay for controlling external devices, and a sensor input with jumper-selectable pullup resistors which allows the connection of a number of off-the-shelf resistive sensor types such as photocells and thermistors. [See More]
- Signal Type: Analog; Digital
- Development Tool: Circuit Emulator
- Category: Developement Board
- Bus Width: 10-Bit; Other
from Linx Technologies
The Linx HumRC ™ Series Remote Control Transceiver modules offer a simple, efficient and cost-effective method of adding remote control capabilities to any product. The Master Development System provides a designer with all the tools necessary to correctly and legally incorporate the module... [See More]
- Signal Type: Analog
- Development Tool: Break Out Board
- Category: Development Suite / Kit
- Supported System: RF
from ams Sensors Germany GmbH
The Brilliant Mix LED color mixing concept from Osram Opto Semiconductors is now even easier to control thanks to the new Brilliant Mix Universal controller from Elec-Con technology. The controller is available in a standard version - with or without a sensor - and in a customized version. It can be... [See More]
- Signal Type: Analog
- Development Tool: Controller Board
- Category: Developement Board
- Supported System: Microcontroller; Sensors (optional feature)
from Power Amp Design
The assembled evaluation kit includes a PCB, current limit resistor selection, terminal strips, bypass capacitors, protection diodes, cage jacks (pin sockets), bumpons and a BNC input signal jack. The PCB can be mounted to a 35mm DIN rail using the included adaptors. The EVAL112 includes sockets for... [See More]
- Signal Type: Analog
- Development Tool: Circuit Emulator
- Category: Development Suite / Kit
- Supported System: Operational Amplifier
from ProMik Gmbh (Seattle Field Office)
ICTP2000 is a fully automated Flash/IC-Test Station for standalone use or integrated in the production environment. Combine In-Circuit Test, Flashing and Functional Test in one small footprint system, either integrated in your production line of off-line in a test-flash cell. [See More]
- Signal Type: Analog; Digital
- Development Tool: Break Out Board
- Category: Development Suite / Kit
- Supported System: Microcontroller
from Red Pitaya, d.o.o.
SDRlab 122-16 was developed specifically for software-defined radio and more demanding RF applications. [See More]
- Signal Type: Analog; Digital
- Development Tool: Debugger / Debug Probe
- Category: Developement Board; Development Suite / Kit; Development Software
- Bus Width: 16-Bit; 16-bit; Other
from Synapse Wireless
The EK2100 gives you the out-of-the-box experience of an Instant-on mesh network and the full power of our RF Engine® hardware, SNAP network firmware, and Portal desktop software. Plug in the SNAPstick, power up the ProtoBoard, and immediately you'll get a sense of the speed and simplicity of SNAP... [See More]
- Signal Type: Analog; Digital
- Development Tool: Debugger / Debug Probe
- Category: Development Suite / Kit
- Supported System: RF; Wireless Systems
from Linx Technologies
The Linx HumDT ™ Series Remote Control Transceiver modules offer a simple, efficient and cost-effective method of adding remote control capabilities to any product. The Master Development System provides a designer with all the tools necessary to correctly and legally incorporate the module... [See More]
- Signal Type: Analog; Digital
- Development Tool: Break Out Board
- Category: Development Suite / Kit
- Supported System: RF
from Power Amp Design
The assembled evaluation kit includes a PCB, current limit resistor selection, terminal strips, heat sink for the current limit resistors, bypass capacitors, protection diodes, cage jacks (pin sockets), bumpons, and BNC input signal jack. The kit can be optionally mounted to a 35mm DIN rail with the... [See More]
- Signal Type: Analog
- Development Tool: Circuit Emulator
- Category: Development Suite / Kit
- Supported System: Operational Amplifier
from ProMik Gmbh (Seattle Field Office)
SAP2000 is a cost effective and modular Semi-Automated Programming System for single or tandem applications. SAP2000 is based on MSP2000NET technology, supports high-speed programming for Microcontroller, high density NOR/NAND Flash memory and CPLD Applications. Includes ergonomic workbench, 19''... [See More]
- Signal Type: Analog; Digital
- Development Tool: Break Out Board
- Category: Development Suite / Kit
- Supported System: Microcontroller; CPLD, NOR/NAND Memory
from Red Pitaya, d.o.o.
SIGNALlab 250-12 is most sophisticated Red Pitaya product, built for more demanding industrial applications and research, where robustness and performance matter more than cost. [See More]
- Signal Type: Analog; Digital
- Development Tool: Debugger / Debug Probe
- Category: Developement Board; Development Software
- Bus Width: 16-Bit; 12-bit; Other
from Synapse Wireless
Synapse provides reliable IEEE802.15.4 RF Engines®. These small, low-powered, 2.4 GHz transmitter-receiver modules can have a range of up to three miles and power consumption as low as 2.5 uA. The RF Engines come loaded with the Synapse SNAP® network operating system. Typical applications include a... [See More]
- Signal Type: Analog; Digital
- Development Tool: Break Out Board
- Category: Developement Board
- Bus Width: 10-Bit; Other
from Power Amp Design
The assembled evaluation kit includes a PCB, current limit resistor selection, terminal strips, heat sink for the current limit resistors, bypass capacitors, protection diodes, cage jacks (pin sockets), bumpons, and BNC input signal jack. The kit can be optionally mounted to a 35mm DIN rail with the... [See More]
- Signal Type: Analog
- Development Tool: Circuit Emulator
- Category: Development Suite / Kit
- Supported System: Operational Amplifier
from Red Pitaya, d.o.o.
SIGNALlab 250-12 is most sophisticated Red Pitaya product, built for more demanding industrial applications and research, where robustness and performance matter more than cost. [See More]
- Signal Type: Analog; Digital
- Development Tool: Debugger / Debug Probe
- Category: Developement Board; Development Suite / Kit; Development Software
- Bus Width: 16-Bit; 12-bit; Other
from Power Amp Design
The assembled evaluation kit includes a PCB, current limit resistor selection, terminal strips, heat sink for the current limit resistors, bypass capacitors, protection diodes, cage jacks (pin sockets), bumpons, and BNC input signal jack. The kit can be optionally mounted on two 35mm DIN rails with... [See More]
- Signal Type: Analog
- Development Tool: Circuit Emulator
- Category: Development Suite / Kit
- Supported System: Operational Amplifier
from Red Pitaya, d.o.o.
STEMlab 125-14 4 Inputs is based on STEMlab 125-14 board, but instead of 2 inputs and 2 output channels offers 4 Input channels that with improved performance. [See More]
- Signal Type: Analog; Digital
- Development Tool: Debugger / Debug Probe
- Category: Developement Board; Development Suite / Kit; Development Software
- Bus Width: 16-Bit; 14-bit; Other
from Power Amp Design
The assembled evaluation kit includes a PCB, current limit resistor selection, terminal strips, heat sink for the current limit resistors, bypass capacitors, protection diodes, cage jacks (pin sockets), bumpons, and BNC input signal jack. The kit can be optionally mounted to a 35mm DIN rail with the... [See More]
- Signal Type: Analog
- Development Tool: Circuit Emulator
- Category: Development Suite / Kit
- Supported System: Operational Amplifier
from Red Pitaya, d.o.o.
STEMlab 125-14 is our most versatile and popular product, which was introduced to the market in 2013 when Red Pitaya was established. Since then it has been used in a wide variety of contexts, from hobbyists and ham radio operators to industry, research, and space applications. [See More]
- Signal Type: Analog; Digital
- Development Tool: Debugger / Debug Probe
- Category: Developement Board; Development Suite / Kit; Development Software
- Bus Width: 16-Bit; 14-bit; Other
from Power Amp Design
The assembled evaluation kit includes a PCB, terminal strips, bypass capacitors, protection diodes, cage jacks (pin sockets), bumpons, and BNC input signal jack. The kit can be optionally mounted to a 35mm DIN rail (not included). Assembled kit shown with the amplifier installed. Amplifiers are... [See More]
- Signal Type: Analog
- Development Tool: Circuit Emulator
- Category: Development Suite / Kit
- Supported System: Operational Amplifier
from Red Pitaya, d.o.o.
STEMlab 125-14 is our most versatile and popular product, which was introduced to the market in 2013 when Red Pitaya was established. Since then it has been used in wide variety of contexts, from hobbyists and ham radio operators to industry, research and space applications. [See More]
- Signal Type: Analog; Digital
- Development Tool: Debugger / Debug Probe
- Category: Developement Board; Development Suite / Kit; Development Software
- Bus Width: 16-Bit; 14-bit; Other
from Power Amp Design
The assembled evaluation kit includes a PCB, current limit resistor selection, terminal strips, bypass capacitors, protection diodes, cage jacks (pin sockets), bumpons and BNC input signal jack. The PCB can be mounted to a 35mm DIN rail using the included adaptors. The amplifier is purchased... [See More]
- Signal Type: Analog
- Development Tool: Circuit Emulator
- Category: Development Suite / Kit
- Supported System: Operational Amplifier
from Red Pitaya, d.o.o.
STEMlab 125-14 Edu Pack is based on Red Pitaya's best-selling DAQ platform and with the chosen accessories a perfect fit for educational purposes. [See More]
- Signal Type: Analog; Digital
- Development Tool: Debugger / Debug Probe
- Category: Developement Board; Development Suite / Kit; Development Software
- Bus Width: 16-Bit; 14-bit; Other
from Power Amp Design
The assembled evaluation kit includes a PCB, terminal strips, bypass capacitors, protection diodes, cage jacks (pin sockets), bumpons, and BNC input signal jack. Assembled kit shown with PAD188 installed. The amplifier is purchased separately. [See More]
- Signal Type: Analog
- Development Tool: Circuit Emulator
- Category: Development Suite / Kit
- Supported System: Operational Amplifier
from Red Pitaya, d.o.o.
STEMlab 125-14 External clock is based on the STEMlab 125-14 model that is modified to be used with an external clock oscillator, which is important especially for RF applications that operate at other frequencies, require better quality clock or clock synchronization. With this modification, users... [See More]
- Signal Type: Analog; Digital
- Development Tool: Debugger / Debug Probe
- Category: Developement Board; Development Suite / Kit; Development Software
- Bus Width: 16-Bit; 14-bit; Other
from Power Amp Design
The assembled evaluation kit includes a PCB, terminal strips, bypass capacitors, protection diodes, cage jacks (pin sockets), bumpons, and BNC input signal jack. Assembled shown with PAD189 installed. The amplifier is purchased separately. [See More]
- Signal Type: Analog
- Development Tool: Circuit Emulator
- Category: Development Suite / Kit
- Supported System: Operational Amplifier
from Red Pitaya, d.o.o.
Based on the STEMlab 125-14 Starter kit and it comes with individual ISO17025 certificate. [See More]
- Signal Type: Analog; Digital
- Development Tool: Debugger / Debug Probe
- Category: Developement Board; Development Suite / Kit; Development Software
- Bus Width: 16-Bit; 14-bit; Other
from Power Amp Design
The assembled evaluation kit includes a PCB, terminal strips, bypass capacitors, protection diodes, cage jacks (pin sockets), bumpons, and BNC input signal jack. The kit can be optionally mounted to a 35mm DIN rail (not included). Assembled kit shown with PAD195 installed. PAD195 amplifier is... [See More]
- Signal Type: Analog
- Development Tool: Circuit Emulator
- Category: Development Suite / Kit
- Supported System: Operational Amplifier
from Red Pitaya, d.o.o.
STEMlab 125-14 Low Noise Bare OEM is the ultimate solution for customization and adaptability in your electronic project. This board, which comes without the usual connectors, provides unparalleled freedom and versatility to tailor your designs according to your specific needs. [See More]
- Signal Type: Analog; Digital
- Development Tool: Debugger / Debug Probe
- Category: Developement Board; Development Software
- Bus Width: 16-Bit; 14-bit; Other
from Power Amp Design
The assembled evaluation kit includes a PCB, terminal strips, bypass capacitors, protection diodes, cage jacks (pin sockets), bumpons, and BNC input signal jack. Assembled kit shown with PAD196 installed. PAD196 amplifier is purchased separately. [See More]
- Signal Type: Analog
- Development Tool: Circuit Emulator
- Category: Development Suite / Kit
- Supported System: Operational Amplifier
from Red Pitaya, d.o.o.
STEMlab 125-14 Low Noise is based on a STEMlab 125-14 board that is populated with additional linear analog power for analog power supplies to reduce RF inputs and outputs noise and consequently increase ENOB. [See More]
- Signal Type: Analog; Digital
- Development Tool: Debugger / Debug Probe
- Category: Developement Board; Development Suite / Kit; Development Software
- Bus Width: 16-Bit; 14-bit; Other
from Power Amp Design
The assembled evaluation kit includes a PCB, current limit resistor selection, terminal strips, bypass capacitors, protection diodes, cage jacks (pin sockets), bumpons and a BNC input signal jack. The PCB can be mounted to a 35mm DIN rail using the included adaptors. The PAD20 and accessory modules... [See More]
- Signal Type: Analog
- Development Tool: Circuit Emulator
- Category: Development Suite / Kit
- Supported System: Operational Amplifier
from Red Pitaya, d.o.o.
We are setting the industry standard in product quality and customer support, our STEMlab OEM boards are easy to integrate and available in multiple hardware and software configurations. [See More]
- Signal Type: Analog; Digital
- Development Tool: Debugger / Debug Probe
- Category: Developement Board; Development Software
- Bus Width: 16-Bit; 14-bit; Other
from Power Amp Design
The assembled evaluation kit includes a PCB, terminal strips, bypass capacitors, protection diodes, bumpons, and BNC input signal jack. Assembled kit shown with PAD541 installed. PAD541 amplifier is purchased separately. [See More]
- Signal Type: Analog
- Development Tool: Circuit Emulator
- Category: Development Suite / Kit
- Supported System: Operational Amplifier
from Red Pitaya, d.o.o.
STEMlab 125-14 is our most versatile and popular product, which was introduced to the market in 2013 when Red Pitaya was established. Since then it has been used in wide variety of contexts, from hobbyists and ham radio operators to industry, research and space applications. [See More]
- Signal Type: Analog; Digital
- Development Tool: Debugger / Debug Probe
- Category: Developement Board; Development Suite / Kit; Development Software
- Bus Width: 16-Bit; 14-bit; Other
from Red Pitaya, d.o.o.
STEMlab 125-14 is our most versatile and popular product, which was introduced to the market in 2013 when Red Pitaya was established. Since then it has been used in wide variety of contexts, from hobbyists and ham radio operators to industry, research and space applications. [See More]
- Signal Type: Analog; Digital
- Development Tool: Debugger / Debug Probe
- Category: Developement Board; Development Suite / Kit; Development Software
- Bus Width: 16-Bit; 14-bit; Other
from Red Pitaya, d.o.o.
STEMlab 125-14 X-Channel System is designed for applications that require multi-channel RF signal acquisition and generation. It enables the user to stream analog and digital signals from/to the client's PC. X-Channel System consists of multiple STEMlab 125-14 devices that are modified and comes... [See More]
- Signal Type: Analog; Digital
- Development Tool: Debugger / Debug Probe
- Category: Developement Board; Development Suite / Kit; Development Software
- Bus Width: 16-Bit; 14-bit; Other
from Red Pitaya, d.o.o.
STEMlab 125-14Z7020 Low Noise is based on a STEMlab 125-14 Z7020 board that is populated with additional linear analog power for analog power supplies to reduce RF inputs and outputs noise and consequently increase ENOB. [See More]
- Signal Type: Analog; Digital
- Development Tool: Debugger / Debug Probe
- Category: Developement Board; Development Suite / Kit; Development Software
- Bus Width: 16-Bit; 14-bit; Other
from Red Pitaya, d.o.o.
STEMlab 125-14Z7020 Low Noise is based on a STEMlab 125-14 Z7020 board that is populated with additional linear analog power for analog power supplies to reduce RF inputs and outputs noise and consequently increase ENOB. [See More]
- Signal Type: Analog; Digital
- Development Tool: Debugger / Debug Probe
- Category: Developement Board; Development Suite / Kit; Development Software
- Bus Width: 16-Bit; 14-bit; Other