USB Electronic Development Boards
from Infineon Technologies AG
6EDL_SPI_LINK provides an interface between a PC running Infineon's BPA Motor Control Workbench software tool and a target 6EDL71x1 motor drive board. Simple USB connection allows designers to read and write parameters such as: gate drive sink and source currents, integrated power supply settings,... [See More]
- Ports: USB
- Supported System: Battery powered motor drives
- Category: Developement Board
- Host Interface: USB
from RS Components, Ltd.
USBUART2Board [See More]
- Ports: USB
- Supported System: USB
- Category: Development Suite / Kit
from ASAP Semiconductor LLC
ADAPTER USB INTERFACE EVM Interface USB 2.0 to I2C/GPIO Bridge No TUSB3210 USB 2.0 to I2C/GPIO Bridge [See More]
- Ports: USB
- Category: Developement Board
from DigiKey
ADS4249 - 14 Bit 250M Samples per Second Analog to Digital Converter (ADC) Evaluation Board [See More]
- Ports: SPI; USB
- Manufacturer: Texas Instruments
from Infineon Technologies AG
Interface board for Infineon LIN alternator regulator IC family (TLE888x) to get familiar with the regulator ICs as fast as possible. Together with the interface software (available for download) the board enables an easy and convenient Design-In and Debugging. The board can be operated at an input... [See More]
- Ports: USB
- Supported System: Automotive
- Category: Developement Board
- Host Interface: LIN ; USB
from RS Components, Ltd.
USBUART5Click [See More]
- Ports: USB; UART
- Supported System: USB to UART
- Category: Development Suite / Kit
from DigiKey
ADS4222 - 12 Bit 65M Samples per Second Analog to Digital Converter (ADC) Evaluation Board [See More]
- Ports: USB
- Manufacturer: Texas Instruments
from Infineon Technologies AG
EZ-USB ™ FX3 USB3 vision solution demo kit. The EZ-USB ™ FX3 CYRB4111 USB3 vision solution demo kit is based on the EZ-USB ™ FX3 product family of Infineon ’s configurable USB 5Gbps peripheral controllers. The second-generation general programmable interface (GPIF II) of... [See More]
- Ports: USB
- Supported System: Industrial
- Category: Developement Board
from RS Components, Ltd.
IoT STM32L4 Discovery Node Kit A1 [See More]
- Ports: USB; Wireless; UART
- Supported System: CPU; RF; Wireless Systems; Bluetooth, OLED, USB-UART, UART, DAC, Gyroscope, RS485, WiFi, Thermocouple, Hall Effect, RS232, ADC, H-Bridge, Microphone, Barometer, MEMS
- Category: Development Suite / Kit
from DigiKey
ADS4229 - 12 Bit 250M Samples per Second Analog to Digital Converter (ADC) Evaluation Board [See More]
- Ports: USB
- Manufacturer: Texas Instruments
from Infineon Technologies AG
Stream 4K videos at 30 fps seamlessly from an external HDMI source to USB host via USB-C. The CY-SD4210 HDMI 4K capture solution demo kit is based on EZ-USB ™ SX3 family of configurable SuperSpeed USB peripheral controllers. This kit enables users to stream video seamlessly from an external... [See More]
- Ports: USB
- Supported System: HDMI Video Capture ; Consumer ; Infotainment ; Industrial
- Category: Developement Board
from RS Components, Ltd.
Digilent 410-212 [See More]
- Ports: USB; UART
- Supported System: Usb to uart converter
- Category: Development Suite / Kit
from DigiKey
ADS125P08 EVALUATION MODULE [See More]
- Ports: USB
- Manufacturer: Texas Instruments
from Infineon Technologies AG
CY4502 EZ-PD ™ CCG2 Development Kit. This guide describes the steps to install the software related to the DVK and to operate the development board provided with the DVK. It documents different types of firmware downloading and debugging methods with detailed instructions. This guide briefly... [See More]
- Ports: USB
- Supported System: Adapters and chargers ; Home entertainment ; Mobile devices
- Category: Developement Board
from RS Components, Ltd.
USB UART 2 CLICK,MIKROE-2674 [See More]
- Ports: USB; UART
- Supported System: Gpio, uart, usb
- Category: Development Suite / Kit
from DigiKey
ADS8860 - 16 Bit 1M Samples per Second Analog to Digital Converter (ADC) Evaluation Board [See More]
- Ports: USB
- Manufacturer: Texas Instruments
from Infineon Technologies AG
CY4521 EZ-PD ™ CCG2 Evaluation Kit. The EZ-PD ™ CY4521 CCG2 Evaluation Kit (EVK) is based on the CCG2 product family (CYPD2xxx) of Infineon's USB Type-C controller with Power Delivery. This EVK is primarily intended to be an evaluation vehicle for USB Type-C systems specifically for... [See More]
- Ports: USB
- Bus Width: 32-Bit
- Category: Developement Board
- Supported System: Adapters and chargers ; Home entertainment ; Mobile devices
from RS Components, Ltd.
USB4715 Evaluation Board [See More]
- Ports: USB
- Supported System: USB Smart Hub
- Category: Development Suite / Kit
from DigiKey
EVALUATION BOARD I.C. [See More]
- Ports: SPI; USB
- Manufacturer: ANALOG DEVICES INC.; Other
from Infineon Technologies AG
CY4531 EZ-PD ™ CCG3 Evaluation Kit. The EZ-PD ™ CY4531 CCG3 Evaluation Kit (EVK) is based on the CCG3 product family (CYPD3xxx) of Infineon's USB Type-C controller with Power Delivery. This EVK is primarily intended to be an evaluation vehicle for USB Type-C systems specifically for... [See More]
- Ports: USB
- Supported System: Adapters and chargers ; Home entertainment ; Mobile devices
- Category: Developement Board
from RS Components, Ltd.
Evaluation platform based on the BlueNRG [See More]
- Ports: USB; Wireless
- Supported System: RF; Usb
- Category: Development Suite / Kit
from DigiKey
MAX22530 - 12 Bit 20k Samples per Second Analog to Digital Converter (ADC) Evaluation Board [See More]
- Ports: SPI; USB
from Infineon Technologies AG
CY4532 EZ-PD ™ CCG3PA Evaluation Kit. The CY4532 EZ-PD ™ CCG3PA Evaluation Kit (EVK) is based on the CCG3PA product family of Infineon ’s USB Type-C microcontrollers. This EVK is intended to be an evaluation vehicle for USB Type-C Power Adapter (PA), USB Type-C mobile charger and... [See More]
- Ports: USB
- Supported System: Adapters and chargers ; Home entertainment ; Mobile devices
- Category: Developement Board
from RS Components, Ltd.
STEVAL-ISC005V1, Evaluation board for th [See More]
- Ports: USB
- Supported System: Power; USB Power Delivery
- Category: Development Suite / Kit
from DigiKey
CS5463 - Bit Samples per Second Analog to Digital Converter (ADC) Evaluation Board [See More]
- Ports: USB
- Manufacturer: CIRRUS LOGIC INC.; Other
from Infineon Technologies AG
EZ-PD ™ Barrel Connector Replacement (BCR) evaluation kit CY4533. The EZ-PD ™ Barrel Connector Replacement (BCR) kit CY4533 is an evaluation platform for customers who want to replace an existing barrel/power input connector with a USB-C connector. Implementing this solution in an... [See More]
- Ports: USB
- Supported System: Adapters and chargers ; Home entertainment ; Mobile devices
- Category: Developement Board
from RS Components, Ltd.
MikroElektronika MIKROE-3294 [See More]
- Ports: USB; UART
- Supported System: Uart, usb
- Category: Development Suite / Kit
from DigiKey
ISL26134 - 24 Bit 80 Samples per Second Analog to Digital Converter (ADC) Evaluation Board [See More]
- Ports: USB
from Infineon Technologies AG
EZ-PD ™ Barrel Connector Replacement (BCR) PLUS evaluation kit CY4534. The CY4534 EZ-PD ™ Barrel Connector Replacement Plus (BCR-Plus) EVK is an evaluation platform for customers who want to replace an existing barrel/power input connector with a USB-C connector. Implementing this... [See More]
- Ports: USB
- Supported System: Power Supplies
- Category: Developement Board
- Host Interface: USB-C receptacle,
from RS Components, Ltd.
Microchip Technology, EVB-LAN7800LC-1 [See More]
- Ports: USB
- Supported System: USB, Network Technology
- Category: Development Suite / Kit
from DigiKey
4-zone Force Sensing Resistor FSR Touch, Resistive (Force) Sensor Evaluation Board [See More]
- Ports: USB
- Manufacturer: INTERLINK ELECTRONICS; Other
- Supported System: Microcontroller
from Infineon Technologies AG
EZ-PD ™ Barrel Connector Replacement (BCR) LITE evaluation kit CY4535. The CY4535 EZ-PD ™ Barrel Connector Replacement Lite (BCR-Lite) EVK is an evaluation platform for customers who want to replace an existing barrel/power input connector with a USB-C connector. Implementing this... [See More]
- Ports: USB
- Supported System: Power Supplies
- Category: Developement Board
- Host Interface: USB-C receptacle,
from RS Components, Ltd.
FT260 Development Module [See More]
- Ports: USB; Usb to uart
- Category: Development Suite / Kit
from DigiKey
4-zone Force Sensing Resistor VersaPoint ™ Touch, Resistive (Force) Sensor Evaluation Board [See More]
- Ports: USB
- Manufacturer: INTERLINK ELECTRONICS; Other
from Infineon Technologies AG
CY4541 EZ-PD ™ CCG4 Evaluation Kit. Version: *E. The CY4541 EZ-PD CCG4 Evaluation Kit (EVK) is based on the Infineon's CCG4 dual port Type-C Power Delivery (PD) controllers. EZ-PD CCG4 is a dual USB Type-C controller that complies with the latest USB Type-C and PD standards. This EVK is... [See More]
- Ports: USB
- Supported System: Adapters and chargers ; Home entertainment ; Mobile devices
- Category: Developement Board
from RS Components, Ltd.
USB3.0 UVC class to 32bit FIFO bus devel [See More]
- Ports: USB; Usb to uart
- Supported System: FIFO Bus technology
- Category: Development Suite / Kit
from DigiKey
VersaPad VersaPad ™ Touch, Resistive (Force) Sensor Evaluation Board [See More]
- Ports: USB
- Manufacturer: INTERLINK ELECTRONICS; Other
- Supported System: Microcontroller
from Infineon Technologies AG
CY4603 HX3 USB 3.0 Hub Development Kit. CY4603 is an easy-to-use Development Kit to evaluate and develop solutions on the USB-IF certified CYUSB331x family of HX3 USB 3.0 hub controllers. This kit comes integrated with the required components to demonstrate application of HX3 for a 4-port USB 3.0... [See More]
- Ports: USB
- Supported System: Adapters and chargers ; Home entertainment ; Mobile devices
- Category: Developement Board
from RS Components, Ltd.
USB3.0 UVC class to 32bit FIFO bus devel [See More]
- Ports: USB
- Supported System: FIFO Bus Protocol, USB 3.1 GEN 1
- Category: Development Suite / Kit
from DigiKey
ESP32-CAM 2MP WIFI+BT WITH USB [See More]
- Ports: USB
- Manufacturer: OLIMEX LTD; Other
- Supported System: Microcontroller
from Infineon Technologies AG
CY4605 - High-Speed Low-Power USB 2.0 Compliant 2-Port Hub. EZ-USB ™ HX2LP(TM) USB 2.0 2-Port Hub. Infineon offers a complete reference design for developing a fixed-function, low-power 2-port USB 2.0 hub that is production ready. Key Features. Compliance with USB 2.0. 480/12/1.5-Mbps... [See More]
- Ports: USB
- Supported System: Adapters and chargers ; Home entertainment ; Mobile devices
- Category: Developement Board
from RS Components, Ltd.
Vinculum-II USB host and MP3 / WMA playe [See More]
- Ports: USB
- Supported System: Vinculum-II Dual USB Host Controller IC
- Category: Development Suite / Kit
from DigiKey
ATSMG55, ICP-10100 SmartMotion ® Barometric Pressure, Temperature Sensor Evaluation Board [See More]
- Ports: USB
- Manufacturer: TDK INVENSENSE; Other
- Supported System: Microcontroller
from Infineon Technologies AG
CY4608 HX2VL Very Low-Power USB 2.0 Compliant 4-Port Hub Development Kit. CY4608 HX2VL(TM) USB 2.0 4-Port Hub. Infineon offers a complete development kit for developing a fixed-function, very low-power 4-port USB 2.0 hub that is production ready and USB-IF compliant. Key Features. Compliance with... [See More]
- Ports: USB
- Supported System: Adapters and chargers ; Home entertainment ; Mobile devices
- Category: Developement Board
from RS Components, Ltd.
XBee USB Adapter Board [See More]
- Ports: USB
- Supported System: USB
- Category: Development Suite / Kit
from DigiKey
ATSMG55, ICP-10101 SmartMotion ® Barometric Pressure, Temperature Sensor Evaluation Board [See More]
- Ports: USB
- Manufacturer: TDK INVENSENSE; Other
- Supported System: Microcontroller
from Infineon Technologies AG
CY4609 HX3 USB 3.0 Hub Reference Design Kit. CY4609 is an easy-to-use Reference Design Kit to evaluate the USB-IF Certified CYUSB330x family of HX3 USB 3.0 hub controllers. The kit can be used as a reference design for standalone USB 3.0 hub application. This kit comes integrated with the required... [See More]
- Ports: USB
- Supported System: Adapters and chargers ; Home entertainment ; Mobile devices
- Category: Developement Board
from RS Components, Ltd.
USB to TTL Serial PCB w/ Embedded Electr [See More]
- Ports: USB
- Supported System: USB
- Category: Development Suite / Kit
from DigiKey
ATSMG55, ICP-10110 SmartMotion ® Barometric Pressure, Temperature Sensor Evaluation Board [See More]
- Ports: USB
- Manufacturer: TDK INVENSENSE; Other
- Supported System: Microcontroller
from Infineon Technologies AG
CY4613 HX3 USB 3.0 Shared Link Development Kit. CY4613 is a development kit to evaluate and develop solutions with CYUSB332x family of HX3 USB 3.0 hub controllers. The kit demonstrates HX3 ’s Shared Link feature in a 6 port configuration and also supports ACA-Dock functionality. This kit comes... [See More]
- Ports: USB
- Supported System: Adapters and chargers ; Home entertainment ; Mobile devices
- Category: Developement Board
from RS Components, Ltd.
USB Hi-Speed FT233HP Evaluation Module, [See More]
- Ports: USB
- Supported System: USB
- Category: Development Suite / Kit
from DigiKey
ATSMG55, ICP-10111 SmartMotion ® Barometric Pressure, Temperature Sensor Evaluation Board [See More]
- Ports: USB
- Manufacturer: TDK INVENSENSE; Other
- Supported System: Microcontroller
from Infineon Technologies AG
CY7110 EZ-PD ™ PMG1-S0 prototyping Kit. The CY7110 EZ-PD ™ PMG1-S0 prototyping kit is a development platform to design products which can be powered from a high-voltage USB PD port, and also need a microcontroller to implement additional features. This platform is compliant with the USB... [See More]
- Ports: USB
- Supported System: Adapters and chargers ; Home entertainment ; Mobile devices
- Category: Developement Board
from RS Components, Ltd.
USB Hi-Speed Sink only FT233HP with MCU [See More]
- Ports: USB
- Supported System: USB
- Category: Development Suite / Kit
from DigiKey
ICM-42688-P, ICP-10101 - Accelerometer, Gyroscope, Humidity, Magnetometer, Pressure, Temperature Sensor Evaluation Board [See More]
- Ports: USB
- Manufacturer: TDK INVENSENSE; Other
- Supported System: Microcontroller
from Infineon Technologies AG
CY7111 EZ-PD ™ PMG1-S1 Prototyping Kit. The CY7111 EZ-PD ™ PMG1-S1 prototyping kit is a development platform to design products which can be powered from a high-voltage USB PD port, and also need a microcontroller to implement different features. This platform is compliant with the USB... [See More]
- Ports: USB
- Supported System: Docks
- Category: Developement Board
from RS Components, Ltd.
USB Hi-Speed FT4233HP Evaluation Module, [See More]
- Ports: USB
- Supported System: USB
- Category: Development Suite / Kit
from DigiKey
BDC-AFBR-S50LV85D TOF SENSOR BOA [See More]
- Ports: USB
- Manufacturer: MIKROELEKTRONIKA; Other
- Supported System: Microcontroller
from Infineon Technologies AG
CY7112 EZ-PD ™ PMG1-S2 Prototyping Kit. The CY7112 EZ-PD ™ PMG1-S2 prototyping kit is a development platform to design products which can be powered from a high-voltage USB PD port, and also need a microcontroller to implement different features. This platform is compliant with the USB... [See More]
- Ports: USB
- Supported System: Docks
- Category: Developement Board
from RS Components, Ltd.
Binho Nova Click [See More]
- Ports: USB
- Supported System: USB
- Category: Development Suite / Kit
from DigiKey
BDC-AFBR-S50LX85D TOF SENSOR BOA [See More]
- Ports: USB
- Manufacturer: MIKROELEKTRONIKA; Other
- Supported System: Microcontroller
from Infineon Technologies AG
The CY7113 EZ-PD ™ PMG1-S3 prototyping kit is a development platform to design products which can be powered from a high-voltage USB PD port, and also need a microcontroller with CAPSENSE ™ capability to implement different features. This kit implements USB PD sink capability. It also... [See More]
- Ports: USB
- Supported System: Docks
- Category: Developement Board
from RS Components, Ltd.
EVB-LAN7801-EDS [See More]
- Ports: Ethernet; USB
- Supported System: Ethernet, USB
- Category: Development Suite / Kit
from DigiKey
- CMOS Imaging, Color (RGB) Sensor Evaluation Board [See More]
- Ports: USB
- Manufacturer: ADAFRUIT INDUSTRIES LLC; Other
from Infineon Technologies AG
PSoC ™ 62S2 evaluation Kit (CY8CEVAL-062S2). PSoC ™ 62S2 evaluation kit (CY8CEVAL-062S2) is a hardware evaluation platform for rapid prototyping of IoT applications based on the PSoC ™ 62xA, PSoC ™ 62x8 MCU product families. This kit features an M.2 interface that enables you... [See More]
- Ports: USB
- Supported System: Smart home, Home appliances, Healthcare and lifestyle, Consumer electronics, Wearables
- Category: Developement Board
from RS Components, Ltd.
ST STEVAL-OET005VC [See More]
- Ports: USB
- Supported System: USB Type C, ESD Protection
- Category: Development Suite / Kit
from DigiKey
MTi-680 MTi 600 Accelerometer, Gyroscope, Magnetometer, Pressure Sensor Evaluation Board [See More]
- Ports: USB
from Infineon Technologies AG
PSoC ™ MiniProg3 Program and Debug Kit. The newer MiniProg4 Program and Debug Kit supports PSoC ™ 4, PSoC ™ 5LP, and PSoC ™ 6 devices with SWD, using industry standard CMSIS-DAP as the transport mechanism. It also provides USB-UART, USB-I2C, and USB-SPI bridging. The... [See More]
- Ports: USB
- Supported System: Industrial automation ; Home entertainment ; Wearables
- Category: Developement Board
from RS Components, Ltd.
Infineon CYBLE-343072-EVAL-M2B [See More]
- Ports: USB; Wireless
- Supported System: RF; Wireless Systems; Bluetooth, USB
- Category: Development Suite / Kit
from DigiKey
MTI-8 DEVELOPMENT KIT INCLUDING [See More]
- Ports: SPI; USB
from Infineon Technologies AG
CY8CKIT-041-41XX PSoC ™ 4100S CapSense Pioneer Kit. The PSoC ™ 4100S Pioneer Kit enables you to evaluate and develop with Infineon's fourth-generation, low-power CAPSENSE ™ solution using the PSoC ™ 4100S device. Featuring the PSoC ™ 4100S Device. The PSoC ™ 4100S... [See More]
- Ports: USB
- Supported System: Industrial automation ; Home entertainment ; Wearables
- Category: Developement Board
from RS Components, Ltd.
Infineon CY4534 [See More]
- Ports: USB
- Supported System: USB
- Category: Development Suite / Kit
from DigiKey
VISION NAVIGATOR STARTER KIT [See More]
- Ports: USB
from Infineon Technologies AG
Bluetooth Low Energy 5.3 Compliant Pioneer Kit. The PSoC ™ 4 Bluetooth Low Energy Pioneer Kit enables customers to evaluate and develop Bluetooth 5.3 compliant solutions using the PSoC ™ 4-BLE device with up to 256KB Flash and 32KB SRAM. The Bluetooth Low Energy Pioneer Kit supports... [See More]
- Ports: USB
- Supported System: Industrial automation ; Home entertainment ; Wearables
- Category: Developement Board
from RS Components, Ltd.
Infineon CY4535 [See More]
- Ports: USB
- Supported System: USB
- Category: Development Suite / Kit
from DigiKey
GT-521F32 - Fingerprint Sensor Evaluation Board [See More]
- Ports: USB
- Manufacturer: SPARKFUN ELECTRONICS; Other
- Supported System: Microcontroller
from ARM Inc.
The Keil MCB2100 Evaluation Board introduces you to the NXP (founded by Philips) LPC2129 family of ARM processor-based devices. The MCB2100 allows you to quickly create and test programs for this advanced architecture. The Keil MCB2100 Evaluation Board connects to your PC using the serial port (for... [See More]
- Ports: Serial Interface; USB
- Signal Type: Digital
- Category: Evaluation Board
- Manufacturer: ARM
from SECO
Boxed solution based on AMD Embedded Ryzen V1605B Applications Processor [See More]
- Ports: Ethernet; Serial Interface; USB; Wireless
- Category: Developement Board
from congatec
Evaluation Carrier Board for COM Express Type 7. Evaluation Carrier Board for COM Express Type 7 modules. Schematics available [See More]
- Ports: USB; LPC, PCIe
- Category: Evaluation Carrier Board
from Linx Technologies
The evaluation module contains the surface mount HumRC ™ Series transceiver module and an MMCX connector on a single board with through-hole headers. This small board simplifies prototyping with the HumRC ™ Series module. [See More]
- Ports: USB
- Development Tool: Break Out Board
- Category: Developement Board
- Signal Type: Digital
from Red Pitaya, d.o.o.
SDRlab 122-16 External clock is based on the SDRlab 122-16 model that is modified to be used with an external clock oscillator, which is important especially for RF applications that operate at other frequencies, require better quality clock or clock synchronization. [See More]
- Ports: Ethernet; Serial Interface; SCI; SPI; USB; Wireless
- Development Tool: Debugger / Debug Probe
- Category: Developement Board; Development Suite / Kit; Development Software
- Signal Type: Analog; Digital
from Merit Sensor Systems
Merit Sensor's ultra-low-pressure evaluation kit enables you to evaluate both analog and digital LP Series pressure sensors. The evaluation kit includes a PC board, USB cable, essential tubing and tee connectors, and Merit Sensor custom software. [See More]
- Ports: USB; Terminal block
- Supported System: Sensors
- Category: Development Suite / Kit
- Host Interface: I²C
from e-con Systems™ Inc
eSOMiMX7 - i.MX7 Computer on Module. NXP/Freescale ARM ® Cortex ™-A7 i.MX7 processor. Upto 2GB 32 bit LPDDR3. Upto 4GB NAND flash. Upto 64GB eMMC Flash. eSOMgears - Over-the-Air (OTA) Firmware Upgrade Solution. Camera. 2 lane MIPI CSI-2 Interface. Display. HDMI (upto 1080p Resolution). [See More]
- Ports: Serial Interface; SPI; USB; Quad SPI SPI I2C RS232 / RS485
- Manufacturer: ARM
- Category: Developement Board
- Host Interface: 2 lane MIPI CSI-2 Interface
from Synapse Wireless
The SN163 Bridge is equipped with a USB port, providing a fast and reliable connection to Synapse Portal® or SNAP® Connect running on a PC. As it's name implies, this board makes an ideal bridge device for connecting external systems to the SNAP network. [See More]
- Ports: Serial Interface; USB; Wireless
- Development Tool: Circuit Emulator
- Category: Developement Board
- Signal Type: Analog; Digital
from ams Sensors Germany GmbH
SDK MTCS-INT-EBx sensor board with True Color sensor and current/charge converter, SPI interface to base board and USB connection to PC, with testing software. MAZeT MMCS Multiple Color Sensors have six bandpasses in the visible wavelength range. In addition to color measurement, spectral analyses... [See More]
- Ports: USB
- Development Tool: Break Out Board
- Category: Development Suite / Kit
- Signal Type: Analog
from Critical Link, LLC
The MitySOM-A10S Development Kit supports Critical Link ’s Intel/Altera Arria 10 SoC based modules. Each kit includes a compatible MitySOM-A10S module (see Purchase table below for compatible modules) and a base board that together feature an array of interfaces and expansion headers such as... [See More]
- Ports: Ethernet; USB
- Development Tool: Debugger / Debug Probe
- Category: Development Suite / Kit
- Signal Type: Digital
from EarthLCD, a division of Earth Computer Technologies, Inc.
Specifications. Full ezLCD Command Set. 10.4" 640x480, 18 bit Color TFT LCD, capable of 242,144 simultaneous colors. 400 Nits. Integrated Resistive Touch Screen. Embedded LCD Controller. Full Speed USB 2.0 Interface 480Mbits/s (via USB connector). Serial (true-RS232), I2c Interface, and SPI. [See More]
- Ports: Serial Interface; SPI; USB
- Signal Type: Digital
- Category: Development Suite / Kit
- Supported System: Video/Audio
from ARM Inc.
The Keil MCB2140 Evaluation Board introduces you to the NXP (founded by Philips) LPC2140 ARM family and allows you to create and test working programs for this advanced architecture. The Keil MCB2140 Evaluation Board connects to your PC using the serial port (for Flash download using FlashMagic) or... [See More]
- Ports: Serial Interface; USB
- Signal Type: Digital
- Category: Evaluation Board
- Manufacturer: ARM
from SECO
The Development Kit contains the following material: - CCOMe-C96 Carrier Board - GPIO Header adapter cable (Free wires on one extremity) - 2x Serial Adapter Cables - 1x certified High Speed DP cable 1m - DP-to-HDMI adapter - 1x SATA cable - HDMI cable - eDP cable - Front Panel module V995 with... [See More]
- Ports: Ethernet; Serial Interface; USB
- Category: Developement Board
from congatec
Evaluation Carrier Board for COM Express ® Mini Type 10 modules. COM Express Type 10. Evaluation Carrier Board. Schematics available. Reference Carrier Board [See More]
- Ports: Ethernet; USB; PCI Expressed
- Category: Evaluation Carrier Board
from Linx Technologies
The Linx HumRC ™ Series Remote Control Transceiver modules offer a simple, efficient and cost-effective method of adding remote control capabilities to any product. The Master Development System provides a designer with all the tools necessary to correctly and legally incorporate the module... [See More]
- Ports: USB
- Development Tool: Break Out Board
- Category: Development Suite / Kit
- Signal Type: Analog
from Red Pitaya, d.o.o.
SDRlab 122-16 was developed specifically for software-defined radio and more demanding RF applications. [See More]
- Ports: Ethernet; Serial Interface; SCI; SPI; USB; Wireless
- Development Tool: Debugger / Debug Probe
- Category: Developement Board; Development Suite / Kit; Development Software
- Signal Type: Analog; Digital
from Critical Link, LLC
The MitySOM-335x Development Kit supports the AM335x based modules from Critical Link. Each kit includes a compatible MitySOM-335x module (see Purchase table below for compatible modules) and a base board that features a strong array of interfaces such as USB, Debug RS232, Dual UART Expansion ports,... [See More]
- Ports: Serial Interface; USB
- Development Tool: Debugger / Debug Probe
- Category: Development Suite / Kit
- Signal Type: Digital
from EarthLCD, a division of Earth Computer Technologies, Inc.
Specifications. Full ezLCD Command Set. 5.6" 320X240, 16 bit Color TFT LCD, capable of 65,536 simultaneous colors. Integrated Resistive Touch Screen. Dedicated LCD Controller Chip. Full Speed USB Interface (via Mini-USB connector). Serial (RS232), I2c. Integrated SD/MMC (Secure Digital/MultiMedia)... [See More]
- Ports: Parallel Interface; Serial Interface; SPI; USB
- Signal Type: Digital
- Category: Development Suite / Kit
- Supported System: Video/Audio
from ARM Inc.
The Keil MCB2370 Evaluation Board introduces you to the NXP LPC2378 microcontroller. It allows you to create and test working programs for this advanced architecture. Components Included. The MCB2370 Evaluation Board includes the following: MCB2300 Evaluation Board populated with an LPC2378,. [See More]
- Ports: USB
- Signal Type: Digital
- Category: Evaluation Board
- Manufacturer: ARM
from SECO
The Development Kit contains the following material: - CCOMe-C79 Carrier Board - 1x Serial Adapter Cables - 1x SATA cable - Front Panel module V995 with connecting cables Module not included. Must be purchased separately [See More]
- Ports: Ethernet; Serial Interface; USB
- Category: Developement Board
from congatec
Evaluation Carrier Board for COM Express ® Type 6 Modules Rev. 3.0. COM Express Type 6 Rev. 3.0 Evaluation Carrier Board. Reference Carrier Board [See More]
- Ports: USB; SDP, SATA, PCI Express
- Category: Evaluation Carrier Board
from Linx Technologies
MS Compact Handheld Transmitter Master Development System. Rapidly develop hardware and software with the MS compact handheld transmitter master development system. It comes with two remotes and a development board for testing and prototyping. The board is populated with an MS Series decoder and LR... [See More]
- Ports: USB; Wireless; RP-SMA
- Development Tool: Break Out Board
- Category: Development Suite / Kit
- Supported System: Wireless Systems
from Red Pitaya, d.o.o.
SIGNALlab 250-12 is most sophisticated Red Pitaya product, built for more demanding industrial applications and research, where robustness and performance matter more than cost. [See More]
- Ports: Ethernet; Serial Interface; SCI; SPI; USB; Wireless
- Development Tool: Debugger / Debug Probe
- Category: Developement Board; Development Software
- Signal Type: Analog; Digital
from Critical Link, LLC
The MitySOM-5CSx Development Kit supports Critical Link ’s Altera Cyclone V SoC based modules. Each kit includes a compatible MitySOM-5CSx module (see Purchase table below for compatible modules) and a base board that features an array of interfaces and expansion headers such as USB, Debug... [See More]
- Ports: Ethernet; USB
- Development Tool: Debugger / Debug Probe
- Category: Development Suite / Kit
- Signal Type: Digital
from EarthLCD, a division of Earth Computer Technologies, Inc.
Specifications. Full ezLCD Command Set. 6.4" 640x480, 18 bit Color TFT LCD, capable of 242,144 simultaneous colors. 250 Nits. Integrated Resistive Touch Screen. Embedded LCD Controller. Full Speed USB 2.0 Interface 480Mbits/s (via USB connector). Serial (true-RS232), I2c Interface, and SPI. [See More]
- Ports: Serial Interface; SPI; USB
- Signal Type: Digital
- Category: Development Suite / Kit
- Supported System: Video/Audio
from ARM Inc.
The Keil MCB2470 Evaluation Board introduces the NXP LPC2470 ARM family, allowing you to create and test working programs for this architecture. Featuring the NXP LPC2478 MCU, the MCB2470 features a range of interfaces such as 3.2" Color QVGA LCD display with touch screen, USB (Host & OTG), CAN,... [See More]
- Ports: USB
- Signal Type: Digital
- Category: Evaluation Board
- Manufacturer: ARM
from SECO
Development Kit Contents: - CCHPC-C78-C Carrier board - GPIO Header adapter cable - (Free wires on one extremity) - 1x certified High Speed DP cable 1m - DP-to-HDMI adapter - 1x Serial Adapter Cables - 1x SATA cable - Front Panel module V995 with connecting cables [See More]
- Ports: Ethernet; Serial Interface; USB
- Category: Developement Board
from congatec
Evaluation Carrier Board for COM-HPC Client Type Modules. Evaluation Carrier Board for COM-HPC Client Type Modules. Routing of the entire signals provided by COM-HPC Module Base Specification R1.0 to standard interface connectors [See More]
- Ports: USB; SATA, MIPI CSI, SMB, GPIO, GPSPI, DMIC
- Category: Evaluation Carrier Board
from Linx Technologies
HS Long-Range Handheld Transmitter Master Development System. Rapidly develop hardware and software with the HS long-range handheld transmitter master development system. It comes with two remotes and a development board for testing and prototyping. The board is populated with an HS Series decoder... [See More]
- Ports: USB; Wireless; RP-SMA
- Development Tool: Break Out Board
- Category: Development Suite / Kit
- Supported System: Wireless Systems
from Red Pitaya, d.o.o.
SIGNALlab 250-12 is most sophisticated Red Pitaya product, built for more demanding industrial applications and research, where robustness and performance matter more than cost. [See More]
- Ports: Ethernet; Serial Interface; SCI; SPI; USB; Wireless
- Development Tool: Debugger / Debug Probe
- Category: Developement Board; Development Suite / Kit; Development Software
- Signal Type: Analog; Digital
from Critical Link, LLC
The MitySOM-AM62 Development Kit supports Critical Link ’s MitySOM-AM62 products, a family of modules based on Texas Instruments Sitara AM62xx. Each kit includes a compatible MitySOM-AM62 module (see Purchase table below for compatible modules) and a base board that together feature an array... [See More]
- Ports: Ethernet; Serial Interface; SPI; USB
- Development Tool: Debugger / Debug Probe
- Category: Development Suite / Kit
- Signal Type: Digital
from EarthLCD, a division of Earth Computer Technologies, Inc.
Specifications. Full ezLCD Command Set. 8" 800x600, 18 bit Color TFT LCD, capable of 242,144 simultaneous colors. 220 Nits. Integrated Resistive Touch Screen. Embedded LCD Controller. Full Speed USB 2.0 Interface 480Mbits/s (via USB connector). Serial (true-RS232), I2c Interface, and SPI. Integrated... [See More]
- Ports: Serial Interface; SPI; USB
- Signal Type: Digital
- Category: Development Suite / Kit
- Supported System: Video/Audio
from ARM Inc.
The Keil MCBSTR750 Evaluation Board introduces you to the STMicroelectronics STR750 ARM family and allows you to create and test working programs for this advanced architecture. The Keil MCBSTR750 Evaluation Board connects to your PC using the serial port (for Flash download) or the JTAG interface... [See More]
- Ports: USB
- Signal Type: Digital
- Category: Evaluation Board
- Manufacturer: ARM
from SECO
The Starter Kit contains: • CQ7-D59 (DP or HDMI ® version) carrier board for Qseven ® Rel. 2.0 / 2.1 compliant modules • HD audio module • I2S audio module • One 24VDC power brick adapter • Cable kit • Adapter for mounting a µQseven ® module on... [See More]
- Ports: Ethernet; Serial Interface; USB
- Category: Developement Board
from congatec
Evaluation Carrier Board for COM-HPC Server Type Modules. Evaluation Carrier Board for COM HPC Server Type Modules. Routing of the entire signals provided by COM HPC Module Base Specification R1.0 to standard interface connectors [See More]
- Ports: Ethernet; SPI; USB; SATA, UART, GP SPI, SMB, eSPI, GPIO
- Manufacturer: Intel®
- Category: Evaluation Carrier Board
from Linx Technologies
MS Long-Range Handheld Transmitter Master Development System. Rapidly develop hardware and software with the MS long-range handheld transmitter master development system. It comes with two remotes and a development board for testing and prototyping. The board is populated with an MS Series decoder... [See More]
- Ports: USB; Wireless; RP-SMA
- Development Tool: Break Out Board
- Category: Development Suite / Kit
- Supported System: Wireless Systems
from Red Pitaya, d.o.o.
STEMlab 125-14 4 Inputs is based on STEMlab 125-14 board, but instead of 2 inputs and 2 output channels offers 4 Input channels that with improved performance. [See More]
- Ports: Ethernet; Serial Interface; SCI; SPI; USB; Wireless
- Development Tool: Debugger / Debug Probe
- Category: Developement Board; Development Suite / Kit; Development Software
- Signal Type: Analog; Digital
from Critical Link, LLC
The MitySOM-C10L Development Kit supports Critical Link ’s Cyclone 10 FPGA-based modules. Each kit includes a compatible MitySOM-C10L module (see Purchase table below for compatible modules) and a base board that features on-board Debug UART to USB converter and 10/100/1000 Gb Ethernet... [See More]
- Ports: Ethernet; USB
- Development Tool: Debugger / Debug Probe
- Category: Development Suite / Kit
- Signal Type: Digital
from EarthLCD, a division of Earth Computer Technologies, Inc.
Specifications. Full ezLCD Command Set. 3.5" 320x240, 24 bit Color TFT LCD. 350 Nits. Integrated Resistive Touch Screen. Embedded LCD Controller. Full Speed USB 2.0 Interface 480Mbits/s (via USB connector). RS232 TTL, and SPI. Integrated MicroSD/MMC (Secure Digital/MultiMedia) Memory Slot!. High... [See More]
- Ports: USB
- Signal Type: Digital
- Category: Development Suite / Kit
- Supported System: Video/Audio
from ARM Inc.
The Keil MCB2900 Evaluation Board introduces you to the NXP (founded by Philips) LPC2900 ARM family and allows you to create and test working programs for this advanced architecture. The Keil MCB2900 Evaluation Board connects to your PC using the JTAG interface (for program debug using a Keil ULINK... [See More]
- Ports: USB
- Signal Type: Digital
- Category: Evaluation Board
- Manufacturer: ARM
from SECO
The Starter Kit contains: • Carrier board for Qseven ® Rev. 2.0 compliant modules CQ7-A42(DP or HDMI ® version) • HD Audio module • I2S Audio module • One 12VDC Notebook Power Adapter • Cable kit • Adapter for mounting a microQ7 module on standard Qseven... [See More]
- Ports: Ethernet; Serial Interface; USB
- Category: Developement Board
from congatec
To achieve a quick start with Qseven congatec offers an evaluation carrier board, which routes all the Qseven ® signals to standard interface connectors. Qseven Evaluation Carrier Board for Qseven 2.0. Schematics available. Reference Carrier Board [See More]
- Ports: Ethernet; SPI; USB; SATA, LPC
- Manufacturer: ARM
- Category: Evaluation Carrier Board
from Linx Technologies
The Linx HumDT ™ Series Remote Control Transceiver modules offer a simple, efficient and cost-effective method of adding remote control capabilities to any product. The Master Development System provides a designer with all the tools necessary to correctly and legally incorporate the module... [See More]
- Ports: USB
- Development Tool: Break Out Board
- Category: Development Suite / Kit
- Signal Type: Analog; Digital
from Red Pitaya, d.o.o.
STEMlab 125-14 is our most versatile and popular product, which was introduced to the market in 2013 when Red Pitaya was established. Since then it has been used in a wide variety of contexts, from hobbyists and ham radio operators to industry, research, and space applications. [See More]
- Ports: Ethernet; Serial Interface; SCI; SPI; USB; Wireless
- Development Tool: Debugger / Debug Probe
- Category: Developement Board; Development Suite / Kit; Development Software
- Signal Type: Analog; Digital
from Critical Link, LLC
The MitySOM-5CSX Embedded Vision Development Kit (VDK) is a complete hardware and software framework designed to accelerate the development of vision applications. The kit offers an Intel/Altera Cyclone V SoC processor with integrated dual core ARMs and FPGA fabric, and is based on Critical Link... [See More]
- Ports: Ethernet; USB
- Development Tool: Debugger / Debug Probe
- Category: Development Suite / Kit
- Signal Type: Digital
from EarthLCD, a division of Earth Computer Technologies, Inc.
ezLCD-001-EVALBOARD Evaluation Board for use with ezLCD-001 Display Module [See More]
- Ports: Serial Interface; USB
- Signal Type: Digital
- Category: Developement Board
- Supported System: Video/Audio
from ARM Inc.
The Keil MCB2929 Evaluation Board introduces the NXP LPC2900 family of ARM9 processor-based devices, allowing you to create and test working programs for this advanced architecture. The MCB2929 has a wide range of interfaces making it a great starting point for your next ARM project. MCB2929... [See More]
- Ports: USB
- Signal Type: Digital
- Category: Evaluation Board
- Manufacturer: ARM
from SECO
Developer board with ESP32-WROVER-E module and RP2040 microcontroller [See More]
- Ports: USB
- Category: Developement Board
from congatec
Evaluation Carrier Board compatible with SMARC modules. SMARC Evaluation Carrier Board. Reference Carrier Board [See More]
- Ports: Ethernet; USB; PCIe, SATA, CAN, GPIO, eSPI/SPI1, SPI Bus
- Category: Evaluation Carrier Board
from Linx Technologies
The Linx HumPRO ™ Series data transceiver modules offer a simple, efficient and cost-effective method of adding wireless capabilities to any product. The Master Development System provides a designer with all the tools necessary to correctly and legally incorporate the module into an end... [See More]
- Ports: USB
- Development Tool: Break Out Board
- Category: Development Suite / Kit
- Supported System: RF
from Red Pitaya, d.o.o.
STEMlab 125-14 is our most versatile and popular product, which was introduced to the market in 2013 when Red Pitaya was established. Since then it has been used in wide variety of contexts, from hobbyists and ham radio operators to industry, research and space applications. [See More]
- Ports: Ethernet; Serial Interface; SCI; SPI; USB; Wireless
- Development Tool: Debugger / Debug Probe
- Category: Developement Board; Development Suite / Kit; Development Software
- Signal Type: Analog; Digital
from Critical Link, LLC
The Industrial IO Development Kit supports the OMAPL138 and AM1808 based modules from Critical Link. Each kit includes a compatible MityDSP-L138, MityDSP-L138F, MitySOM-1808, or MitySOM-1808F module (see Purchase table below for compatible modules) and a base board that features a strong array of... [See More]
- Ports: Ethernet; Serial Interface; USB
- Signal Type: Digital
- Category: Development Suite / Kit
- Supported System: FPGA
from EarthLCD, a division of Earth Computer Technologies, Inc.
2.7" 240x160 small form factor TFT Color LCD Display. RS232 and USB interfaces. Multi-Font Text Layer. LCD controller supports 256 colors (LCD panel alone supports 512 colors). Default serial data rate of 115200 bauds (user-changeable to any standard speeds between 2400 and 115200 bauds). Includes... [See More]
- Ports: Serial Interface; USB
- Signal Type: Digital
- Category: Development Suite / Kit
- Supported System: Video/Audio
from ARM Inc.
The Keil MCBSTR9 Evaluation Board introduces you to the STMicroelectronics STR9 ARM family and allows you to create and test working programs for this advanced architecture. The Keil MCBSTR9 Evaluation Board connects to your PC using the JTAG interface (for program debug using a Keil ULINK family... [See More]
- Ports: USB
- Signal Type: Digital
- Category: Evaluation Board
- Manufacturer: ARM
from SECO
Pico-ITX Single Board Computer with the Intel ® Atom ® X Series, Intel ® Celeron ® N Series and Intel ® Pentium ® N Series (formerly Apollo Lake) Processors [See More]
- Ports: Ethernet; Serial Interface; USB
- Category: Developement Board
from Linx Technologies
HS Series Remote Control Encoder & Decoder Master Development System. Rapidly develop hardware and software based on the HS Series encoder and decoder along with LR Series or ES Series RF modules using the HS Series master development system. It comes with two development boards for benchmarking... [See More]
- Ports: USB; Wireless; RP-SMA
- Development Tool: Break Out Board
- Category: Development Suite / Kit
- Supported System: Wireless Systems
from Red Pitaya, d.o.o.
STEMlab 125-14 Edu Pack is based on Red Pitaya's best-selling DAQ platform and with the chosen accessories a perfect fit for educational purposes. [See More]
- Ports: Ethernet; Serial Interface; SCI; SPI; USB; Wireless
- Development Tool: Debugger / Debug Probe
- Category: Developement Board; Development Suite / Kit; Development Software
- Signal Type: Analog; Digital
from Critical Link, LLC
The MitySOM-335x Maker Transition Kit is for developers looking to convert a maker board-based prototype to a production suitable design. Each kit includes a compatible MitySOM-335x module (see Purchase table below for compatible modules) and a Maker Transition base board that features interfaces... [See More]
- Ports: USB
- Development Tool: Debugger / Debug Probe
- Category: Development Suite / Kit
- Signal Type: Digital
from EarthLCD, a division of Earth Computer Technologies, Inc.
Intelligent Programmable LCD Module with Touch Screen. FEATURES: Integrated Touch Screen (resistive). Programmable Display Module. Serial+USB+Parallel Interface. I2C/AVR/BASIC Stamp/VB Compatible. 64Kb Flash ROM (available for fonts & bitmaps). 1 Megabyte Flash ROM (use to be determined). [See More]
- Ports: USB
- Signal Type: Digital
- Category: Development Suite / Kit
- Supported System: Video/Audio
from ARM Inc.
The Keil MCB1200 Evaluation Board enables you to create and test working programs based on the NXP LPC1200 family of ARM Cortex ™-M0 processor-based devices. Features. 33MHz LPC1227FBD64/301 device ARM Cortex-M0 processor-based MCU in 64-pin LQFP. On-Chip Memory: 128KB Flash and 8KB RAM. [See More]
- Ports: USB
- Signal Type: Digital
- Category: Evaluation Board
- Manufacturer: ARM
from SECO
SBC based on AMD Embedded Ryzen V1000B family of Applications Processor [See More]
- Ports: Ethernet; Serial Interface; USB
- Category: Developement Board
from Linx Technologies
MS Series Remote Control Encoder & Decoder Master Development System. Rapidly develop hardware and software based on the MS Series encoder and decoder along with Linx RF modules using the MS Series master development system. It comes with two development boards for benchmarking and prototyping,... [See More]
- Ports: USB; Wireless; RP-SMA
- Development Tool: Break Out Board
- Category: Development Suite / Kit
- Supported System: Wireless Systems
from Red Pitaya, d.o.o.
STEMlab 125-14 External clock is based on the STEMlab 125-14 model that is modified to be used with an external clock oscillator, which is important especially for RF applications that operate at other frequencies, require better quality clock or clock synchronization. With this modification, users... [See More]
- Ports: Ethernet; Serial Interface; SCI; SPI; USB; Wireless
- Development Tool: Debugger / Debug Probe
- Category: Developement Board; Development Suite / Kit; Development Software
- Signal Type: Analog; Digital
from Critical Link, LLC
In order to facilitate faster time to market, Critical Link developed a family of off-the-shelf hardware modules that provide a wide range of flexible I/O and data acquisition capability that is ready to roll with the MityDSP-6455F SoMs. The MityDSP-6455F Development Kit provides a mother card that... [See More]
- Ports: Ethernet; Serial Interface; USB
- Signal Type: Digital
- Category: Development Suite / Kit
- Supported System: DSP; FPGA
from ARM Inc.
The Keil MCB1000 Evaluation Boards enable you to create and test working programs based on the NXP family of ARM Cortex ™-M0 and Cortex-M3 processor-based devices. It is available in four configurations: The MCB1114 is populated with a NXP LPC1114FBD48/302 device. The MCB11C14 is populated... [See More]
- Ports: USB
- Signal Type: Digital
- Category: Evaluation Board
- Manufacturer: ARM
from SECO
SBC based on Intel ® Celeron ® and Pentium ® Applications Processor [See More]
- Ports: Ethernet; Serial Interface; USB; Wireless
- Category: Developement Board
from Linx Technologies
MT Series Remote Control Transcoder Master Development System. Rapidly develop hardware and software based on MT Series transcoders and Linx RF modules with the MT Series master development system. It comes with two development boards for benchmarking and prototyping, each of which is populated with... [See More]
- Ports: USB; Wireless; RP-SMA
- Development Tool: Break Out Board
- Category: Development Suite / Kit
- Supported System: Wireless Systems
from Red Pitaya, d.o.o.
Based on the STEMlab 125-14 Starter kit and it comes with individual ISO17025 certificate. [See More]
- Ports: Ethernet; Serial Interface; SCI; SPI; USB; Wireless
- Development Tool: Debugger / Debug Probe
- Category: Developement Board; Development Suite / Kit; Development Software
- Signal Type: Analog; Digital
from Critical Link, LLC
In order to facilitate faster time to market, Critical Link developed a family of off-the-shelf hardware modules that provide a wide range of flexible I/O and data acquisition capability that is ready to roll with the MityDSP-6711F SoMs. The MityDSP-6711F Development Kit provides a 5 ″x7... [See More]
- Ports: Ethernet; Serial Interface; USB
- Signal Type: Digital
- Category: Development Suite / Kit
- Supported System: DSP; FPGA
from ARM Inc.
The Keil MCB1700 Evaluation Boards enable you to create and test working programs based on the NXP LPC1700 family of ARM Cortex ™-M3 processor-based devices. The MCB1700 Evaluation Board is available in two different configurations: The MCB1750 Evalution Board is populated with an NXP LPC1758... [See More]
- Ports: USB
- Signal Type: Digital
- Category: Evaluation Board
- Manufacturer: ARM
from SECO
The Development Kit contains the following material: - CSM-B79 Carrier Board - Serial Adapter Cables - 1x SATA power cable - Main power Adapter cable - 1x certified High Speed DP cable, DP1.4 standard compliant - 1x certified High Speed HDMI ® cable, HDMI ® 2.0 compliant - DP-to-HDMI... [See More]
- Ports: Ethernet; Serial Interface; USB; Wireless
- Category: Developement Board
from Linx Technologies
QS Series USB Interface Module Master Development System. Rapidly develop hardware and software based on the QS Series USB interface module with the QS Series master development system. It comes with a development board for testing and prototyping that is populated with a USB interface for... [See More]
- Ports: USB
- Development Tool: Break Out Board
- Category: Development Suite / Kit
- Supported System: Communications/Networking; Wireless Systems
from Red Pitaya, d.o.o.
STEMlab 125-14 Low Noise Bare OEM is the ultimate solution for customization and adaptability in your electronic project. This board, which comes without the usual connectors, provides unparalleled freedom and versatility to tailor your designs according to your specific needs. [See More]
- Ports: Ethernet; Serial Interface; SCI; SPI; USB; Wireless
- Development Tool: Debugger / Debug Probe
- Category: Developement Board; Development Software
- Signal Type: Analog; Digital
from Critical Link, LLC
The MitySOM-iMX6 SMARC Development Kit supports Critical Link ’s MitySOM-iMX6 SMARC modules. It features an array of peripherals and connectors such as USB 2.0 & USB 3.0, LVDS, CSI, mSATA, RS232, RS485, I2C, MMC, Micro SD, Ethernet, and CAN transceivers. [See More]
- Ports: Ethernet; Serial Interface; USB
- Signal Type: Digital
- Category: Development Suite / Kit
from ARM Inc.
The Keil MCB9B500 Evaluation Board enables you to create and test working programs based on the Fujitsu MB9BF500 family of ARM Cortex ™-M3 processor-based devices. Features. 80MHz MB9BF506 ARM Cortex-M3 processor-based MCU in 120-pin LQFP. On-Chip Memory: 512KB Flash & 32KB RAM. USB 2.0... [See More]
- Ports: USB
- Signal Type: Digital
- Category: Evaluation Board
- Manufacturer: ARM
from Red Pitaya, d.o.o.
STEMlab 125-14 Low Noise is based on a STEMlab 125-14 board that is populated with additional linear analog power for analog power supplies to reduce RF inputs and outputs noise and consequently increase ENOB. [See More]
- Ports: Ethernet; Serial Interface; SCI; SPI; USB; Wireless
- Development Tool: Debugger / Debug Probe
- Category: Developement Board; Development Suite / Kit; Development Software
- Signal Type: Analog; Digital
from ARM Inc.
The Keil MCBSTM32 Evaluation Board enables you to create and test working programs based on the STMicroelectronics STM32 family of ARM Cortex ™-M3 processor-based devices. Features. 72MHz STM32F103RB ARM Cortex ™-M3 processor-based MCU in 64-pin LQFP. On-Chip Memory: 128KB Flash &... [See More]
- Ports: USB
- Signal Type: Digital
- Category: Evaluation Board
- Manufacturer: ARM
from Red Pitaya, d.o.o.
We are setting the industry standard in product quality and customer support, our STEMlab OEM boards are easy to integrate and available in multiple hardware and software configurations. [See More]
- Ports: Ethernet; Serial Interface; SCI; SPI; USB; Wireless
- Development Tool: Debugger / Debug Probe
- Category: Developement Board; Development Software
- Signal Type: Analog; Digital
from ARM Inc.
The Keil MCBSTM32C Evaluation Board enables you to create and test working programs based on the STMicroelectronics STM32 Connectivity Line family of ARM Cortex ™-M3 processor-based devices. Features. 72MHz STM32F107VC ARM Cortex ™-M3 processor-based MCU in 100-pin LQFP. On-Chip Memory:... [See More]
- Ports: USB
- Signal Type: Digital
- Category: Evaluation Board
- Manufacturer: ARM
from Red Pitaya, d.o.o.
STEMlab 125-14 is our most versatile and popular product, which was introduced to the market in 2013 when Red Pitaya was established. Since then it has been used in wide variety of contexts, from hobbyists and ham radio operators to industry, research and space applications. [See More]
- Ports: Ethernet; Serial Interface; SCI; SPI; USB; Wireless
- Development Tool: Debugger / Debug Probe
- Category: Developement Board; Development Suite / Kit; Development Software
- Signal Type: Analog; Digital
from ARM Inc.
The Keil MCBSTM32EXL Evaluation Boards enable you to create and test working programs based on the STMicroelectronics STM32 family of ARM Cortex ™-M3 processor-based devices. It is available in two configurations: The MCBSTM32EXL is populated with a STM32F103ZG device. The MCBSTM32E is... [See More]
- Ports: USB
- Signal Type: Digital
- Category: Evaluation Board
- Manufacturer: ARM
from Red Pitaya, d.o.o.
STEMlab 125-14 is our most versatile and popular product, which was introduced to the market in 2013 when Red Pitaya was established. Since then it has been used in wide variety of contexts, from hobbyists and ham radio operators to industry, research and space applications. [See More]
- Ports: Ethernet; Serial Interface; SCI; SPI; USB; Wireless
- Development Tool: Debugger / Debug Probe
- Category: Developement Board; Development Suite / Kit; Development Software
- Signal Type: Analog; Digital
from ARM Inc.
The Keil MCBTMPM360 Evaluation Boards enable you to create and test working programs based on the Toshiba TMPM360 family of ARM Cortex ™-M3 processor-based devices. The MCBTMPM360 Evaluation Board is available in three configurations: The MCBTMPM360 Evaluation Board is populated with a Toshiba... [See More]
- Ports: USB
- Signal Type: Digital
- Category: Evaluation Board
- Manufacturer: ARM
from Red Pitaya, d.o.o.
STEMlab 125-14 X-Channel System is designed for applications that require multi-channel RF signal acquisition and generation. It enables the user to stream analog and digital signals from/to the client's PC. X-Channel System consists of multiple STEMlab 125-14 devices that are modified and comes... [See More]
- Ports: Ethernet; Serial Interface; SCI; SPI; USB; Wireless
- Development Tool: Debugger / Debug Probe
- Category: Developement Board; Development Suite / Kit; Development Software
- Signal Type: Analog; Digital
from ARM Inc.
The DSTREAM ™ high-performance debug and trace unit enables powerful software debug and optimization on any ARM processor-based hardware target. DSTREAM extends the functionality of RVI and RVT2 with faster memory download and trace capture, as well as wider support for physical debug and... [See More]
- Ports: USB
- Development Tool: Debugger / Debug Probe
- Category: Development Suite / Kit
- Signal Type: Digital
from Red Pitaya, d.o.o.
STEMlab 125-14Z7020 Low Noise is based on a STEMlab 125-14 Z7020 board that is populated with additional linear analog power for analog power supplies to reduce RF inputs and outputs noise and consequently increase ENOB. [See More]
- Ports: Ethernet; Serial Interface; SCI; SPI; USB; Wireless
- Development Tool: Debugger / Debug Probe
- Category: Developement Board; Development Suite / Kit; Development Software
- Signal Type: Analog; Digital
from ARM Inc.
RealView ICE (RVI) and RealView Trace 2 (RVT2) are ARM's legacy target connection units. Although not as powerful as the DSTREAM combined debug and trace unit, RVI and RVT2 still provide suitable target connection functionality for RVD users. RVI ™ run-control debug unit. RVI enables the... [See More]
- Ports: USB
- Development Tool: Debugger / Debug Probe
- Category: Debug Adapter
- Signal Type: Digital
from Red Pitaya, d.o.o.
STEMlab 125-14Z7020 Low Noise is based on a STEMlab 125-14 Z7020 board that is populated with additional linear analog power for analog power supplies to reduce RF inputs and outputs noise and consequently increase ENOB. [See More]
- Ports: Ethernet; Serial Interface; SCI; SPI; USB; Wireless
- Development Tool: Debugger / Debug Probe
- Category: Developement Board; Development Suite / Kit; Development Software
- Signal Type: Analog; Digital