Digital Electronic Development Boards
from ASAP Semiconductor LLC
DEM-DAI3008 Audio CODEC No PCM3008 Coax & Optical Digital Inputs & Outputs [See More]
- Signal Type: Digital
- Category: Developement Board
from DigiKey
KXSS5-2057 - Accelerometer, 3 Axis Sensor Evaluation Board [See More]
- Signal Type: Analog; Digital
- Manufacturer: KIONIX INC.; Other
from Nordic Semiconductor ASA
The nRF5340 DK is the development kit for the , containing everything needed to get started with development, on a single board. The DK supports development with an extensive range of wireless protocols. It supports Bluetooth Low Energy with features such as high-throughput 2 Mbps, Advertising... [See More]
- Signal Type: Analog; Digital
- Development Tool: Debugger / Debug Probe
- Category: Development Suite / Kit
- Supported System: Wireless Systems
from Infineon Technologies AG
Evaluation board - audio board using highly power efficient digital-input multilevel MERUS ™ class D amplifier IC MA12040P. This audio evaluation kit contains all hardware and software elements that are needed to evaluate the highly power efficient MERUS ™ digital input multilevel class... [See More]
- Signal Type: Digital
- Supported System: Consumer
- Category: Developement Board
from DigiKey
SDP800 - Pressure Sensor Evaluation Board [See More]
- Signal Type: Analog; Digital
- Manufacturer: SENSIRION AG; Other
from Nordic Semiconductor ASA
The nRF5340 Preview Development Kit (PDK) has been replaced by the . The nRF5340 PDK is the preview development kit for the , containing everything needed to get started with development, on a single board. The PDK supports development with an extensive range of wireless protocols. It supports... [See More]
- Signal Type: Analog; Digital
- Development Tool: Debugger / Debug Probe
- Category: Development Suite / Kit
- Supported System: Wireless Systems
from Infineon Technologies AG
Evaluation board – audio board using highly power efficient digital-input multilevel MERUS ™ class D amplifier IC MA12070P. This board is discontinued. Please refer to the newer version EVAL_AUDIO_MA12070P_B. The audio evaluation kit contains all hardware and software elements that are... [See More]
- Signal Type: Digital
- Supported System: Consumer
- Category: Developement Board
from DigiKey
SLI-0430 SLI Flow, Liquid Sensor Evaluation Board [See More]
- Signal Type: Analog; Digital
- Manufacturer: SENSIRION AG; Other
from Nordic Semiconductor ASA
The Power Profiler Kit II (PPK2) is a standalone unit, which can measure and optionally supply currents all the way from sub-uA and as high as 1A on all Nordic DKs, in addition to external hardware. The PPK2 is powered via a standard 5V USB cable, which can supply up to 500mA of current. In order to... [See More]
- Signal Type: Analog; Digital
- Category: Development Suite / Kit
from Infineon Technologies AG
Reference board - Audio board using highly power efficient digital input multilevel MERUS ™ class D amplifier IC MA12040P. This board is a size optimized implementation example for the highly power efficient MERUS ™ digital input multilevel class D amplifier IC 2x40 W (MA12040P). The IC... [See More]
- Signal Type: Digital
- Supported System: Consumer
- Category: Developement Board
from DigiKey
SLI-1000 SLI Flow, Liquid Sensor Evaluation Board [See More]
- Signal Type: Analog; Digital
- Manufacturer: SENSIRION AG; Other
from DigiKey
SLI-2000 SLI Flow, Liquid Sensor Evaluation Board [See More]
- Signal Type: Analog; Digital
- Manufacturer: SENSIRION AG; Other
from DigiKey
SLS-1500 SLS Flow, Liquid Sensor Evaluation Board [See More]
- Signal Type: Analog; Digital
- Manufacturer: SENSIRION AG; Other
from DigiKey
SLG-0150 SLG Flow, Liquid Sensor Evaluation Board [See More]
- Signal Type: Analog; Digital
- Manufacturer: SENSIRION AG; Other
from DigiKey
SLQ-QT500 - Flow, Liquid Sensor Evaluation Board [See More]
- Signal Type: Analog; Digital
- Manufacturer: SENSIRION AG; Other
from DigiKey
SHT31 - Humidity, Temperature Sensor Evaluation Board [See More]
- Signal Type: Analog; Digital
- Manufacturer: SENSIRION AG; Other
from Data Device Corporation (DDC)
The RD19230EX-300 evaluation board is used to evaluate DDC's RD19230FX 16 bit monolithic tracking resolver to digital converter. The RD19230FX is a small low cost solution for today's motion feedback applications. This single chip converter features programmable resolution of 10,12,14 or 16 bit with... [See More]
- Signal Type: Digital
- Development Tool: Break Out Board
- Category: Developement Board
- Bus Width: 16-Bit
from Multi-Tech Systems, Inc.
The MultiConnect ® OCG-D open communications gateway performs like a mini industrial computer that you can plug directly into existing applications. The Linux-based open source software allows you to develop and deploy custom applications in a short period of time. The MultiConnect OCG-D is... [See More]
- Signal Type: Digital
- Supported System: Communications/Networking
- Category: Developement Board
from Linx Technologies
The evaluation module contains the surface mount HumRC ™ Series transceiver module and an MMCX connector on a single board with through-hole headers. This small board simplifies prototyping with the HumRC ™ Series module. [See More]
- Signal Type: Digital
- Development Tool: Break Out Board
- Category: Developement Board
- Supported System: RF
from EarthLCD, a division of Earth Computer Technologies, Inc.
Specifications. Full ezLCD Command Set. 10.4" 640x480, 18 bit Color TFT LCD, capable of 242,144 simultaneous colors. 400 Nits. Integrated Resistive Touch Screen. Embedded LCD Controller. Full Speed USB 2.0 Interface 480Mbits/s (via USB connector). Serial (true-RS232), I2c Interface, and SPI. [See More]
- Signal Type: Digital
- Supported System: Video/Audio
- Category: Development Suite / Kit
- Manufacturer: EarthLCD; Other
from Critical Link, LLC
The MitySOM-A10S Development Kit supports Critical Link ’s Intel/Altera Arria 10 SoC based modules. Each kit includes a compatible MitySOM-A10S module (see Purchase table below for compatible modules) and a base board that together feature an array of interfaces and expansion headers such as... [See More]
- Signal Type: Digital
- Development Tool: Debugger / Debug Probe
- Category: Development Suite / Kit
- Manufacturer: Altera; Intel®
from Broadcom Inc.
HEDS-8949, optical encoder alignment kit, features real-time IC monitoring to allow user monitor the IC output during alignment. The alignment kit consists of the IC interface hardware, supported by a PC application. The IC interface hardware is a microcontroller system that links up AEAT9000... [See More]
- Signal Type: Digital
- Development Tool: Alignment
- Category: Development Suite / Kit
from ARM Inc.
The Keil MCB900 Evaluation Board is a versatile, flexible prototype board for the NXP (founded by Philips) P89LPC93x microcontroller family. It includes the Keil µVision LPC Development Studio which allows you to create and debug programs that you can program into on-chip Flash ROM using... [See More]
- Signal Type: Digital
- Category: Evaluation Board
from Red Pitaya, d.o.o.
SDRlab 122-16 External clock is based on the SDRlab 122-16 model that is modified to be used with an external clock oscillator, which is important especially for RF applications that operate at other frequencies, require better quality clock or clock synchronization. [See More]
- Signal Type: Analog; Digital
- Development Tool: Debugger / Debug Probe
- Category: Developement Board; Development Suite / Kit; Development Software
- Bus Width: 16-Bit; 16-bit; Other
from Moxa Inc.
Moxa has unveiled a free 30-day trial version of NVR-based IP surveillance software, SoftNVR, that can simultaneously manage up to 64 channels of streaming video from Moxa's video encoders (VPort 351, VPort 354, VPort 254, VPort 251) and IP cameras (VPort 25 series) simultaneously. Features include... [See More]
- Signal Type: Digital
- Manufacturer: Intel®
- Category: Development Software
- Features: Software Included
from Synapse Wireless
The SN111 End Device provides a latching relay for controlling external devices, and a sensor input with jumper-selectable pullup resistors which allows the connection of a number of off-the-shelf resistive sensor types such as photocells and thermistors. [See More]
- Signal Type: Analog; Digital
- Development Tool: Circuit Emulator
- Category: Developement Board
- Bus Width: 10-Bit; Other
from ams Sensors Germany GmbH
True Color Sensor (filter CIE1931 LAB Tri-stimulus function) with programmable analog current integrator and with 16bit ADC and I ²C interfac. [See More]
- Signal Type: Digital
- Development Tool: Sensor Board
- Category: Developement Board
- Supported System: Sensors
from ProMik Gmbh (Seattle Field Office)
The PA2012 is ProMik's latest fully automated programming machine. The PA2012 is characterized by high production throughput, advanced device handling and best in the market 3D Co-planarity & 2D linearity lead inspection features. [See More]
- Signal Type: Analog; Digital
- Development Tool: Break Out Board
- Category: Development Suite / Kit
- Supported System: Flash Memory
from Data Device Corporation (DDC)
The RD-19240EX-300 evaluation board is used to evaluate DDC's RD-19240 14 bit monolithic tracking resolver to digital converter. The RD-19240 is a small low cost solution for today's motion feedback applications. This single chip converter features programmable resolution of 10,12, or 14 bit with... [See More]
- Signal Type: Digital
- Development Tool: Break Out Board
- Category: Developement Board
- Bus Width: 16-Bit
from Linx Technologies
The evaluation module contains the surface mount HumDT ™ Series transceiver module and an MMCX connector on a single board with through-hole headers. This small board simplifies prototyping with the HumDT ™ Series module. [See More]
- Signal Type: Digital
- Development Tool: Break Out Board
- Category: Developement Board
- Supported System: RF
from EarthLCD, a division of Earth Computer Technologies, Inc.
Specifications. Full ezLCD Command Set. 5.6" 320X240, 16 bit Color TFT LCD, capable of 65,536 simultaneous colors. Integrated Resistive Touch Screen. Dedicated LCD Controller Chip. Full Speed USB Interface (via Mini-USB connector). Serial (RS232), I2c. Integrated SD/MMC (Secure Digital/MultiMedia)... [See More]
- Signal Type: Digital
- Supported System: Video/Audio
- Category: Development Suite / Kit
- Manufacturer: EarthLCD; Other
from Critical Link, LLC
The MitySOM-335x Development Kit supports the AM335x based modules from Critical Link. Each kit includes a compatible MitySOM-335x module (see Purchase table below for compatible modules) and a base board that features a strong array of interfaces such as USB, Debug RS232, Dual UART Expansion ports,... [See More]
- Signal Type: Digital
- Development Tool: Debugger / Debug Probe
- Category: Development Suite / Kit
- Ports: Serial Interface; USB
from Broadcom Inc.
This programmer has been developed to program the 32 bit OTP memory in Avago ’s AEAT-6600-T16 Magnetic Encoder IC. The programmer is capable of monitoring the IC response in real-time. The programmer kit comes with IC interface hardware, USB cable and TSSOP IC sockets. The IC interface... [See More]
- Signal Type: Digital
- Development Tool: Debugger / Debug Probe
- Category: Development Suite / Kit
- Bus Width: 32-Bit
from ARM Inc.
The Keil MCB950 Evaluation Board is a versatile, flexible prototype board for the NXP (founded by Philips) P89LPC952 microcontroller family. It includes the Keil µVision LPC Development Studio which allows you to create and debug programs that you can program into the on-chip Flash ROM using... [See More]
- Signal Type: Digital
- Category: Evaluation Board
from Red Pitaya, d.o.o.
SDRlab 122-16 was developed specifically for software-defined radio and more demanding RF applications. [See More]
- Signal Type: Analog; Digital
- Development Tool: Debugger / Debug Probe
- Category: Developement Board; Development Suite / Kit; Development Software
- Bus Width: 16-Bit; 16-bit; Other
from Moxa Inc.
The SoftNVR-IA 32-channel IP surveillance software is designed for use with industrial applications. One of the key features of SoftNVR-IA is a built-in OPC server, which can communicate directly with industrial automation systems (SCADA, HMI, etc.). To enhance system intelligence, video recording... [See More]
- Signal Type: Digital
- Supported System: SCADA, HMI
- Category: Development Software
- Manufacturer: Intel®
from Synapse Wireless
The EK2100 gives you the out-of-the-box experience of an Instant-on mesh network and the full power of our RF Engine® hardware, SNAP network firmware, and Portal desktop software. Plug in the SNAPstick, power up the ProtoBoard, and immediately you'll get a sense of the speed and simplicity of SNAP... [See More]
- Signal Type: Analog; Digital
- Development Tool: Debugger / Debug Probe
- Category: Development Suite / Kit
- Supported System: RF; Wireless Systems
from ProMik Gmbh (Seattle Field Office)
The IPS2000NET is an Automatic In-Line Programming and Board Testing Station for Integration in Production Lines. [See More]
- Signal Type: Digital
- Development Tool: Debugger / Debug Probe; PCB Tester
- Category: Development Suite / Kit
- Supported System: PCB
from Linx Technologies
The Linx HumDT ™ Series Remote Control Transceiver modules offer a simple, efficient and cost-effective method of adding remote control capabilities to any product. The Master Development System provides a designer with all the tools necessary to correctly and legally incorporate the module... [See More]
- Signal Type: Analog; Digital
- Development Tool: Break Out Board
- Category: Development Suite / Kit
- Supported System: RF
from EarthLCD, a division of Earth Computer Technologies, Inc.
Specifications. Full ezLCD Command Set. 6.4" 640x480, 18 bit Color TFT LCD, capable of 242,144 simultaneous colors. 250 Nits. Integrated Resistive Touch Screen. Embedded LCD Controller. Full Speed USB 2.0 Interface 480Mbits/s (via USB connector). Serial (true-RS232), I2c Interface, and SPI. [See More]
- Signal Type: Digital
- Supported System: Video/Audio
- Category: Development Suite / Kit
- Manufacturer: EarthLCD; Other
from Critical Link, LLC
The MitySOM-5CSx Development Kit supports Critical Link ’s Altera Cyclone V SoC based modules. Each kit includes a compatible MitySOM-5CSx module (see Purchase table below for compatible modules) and a base board that features an array of interfaces and expansion headers such as USB, Debug... [See More]
- Signal Type: Digital
- Development Tool: Debugger / Debug Probe
- Category: Development Suite / Kit
- Supported System: FPGA
from ARM Inc.
The Keil MCB2100 Evaluation Board introduces you to the NXP (founded by Philips) LPC2129 family of ARM processor-based devices. The MCB2100 allows you to quickly create and test programs for this advanced architecture. The Keil MCB2100 Evaluation Board connects to your PC using the serial port (for... [See More]
- Signal Type: Digital
- Manufacturer: ARM
- Category: Evaluation Board
- Ports: Serial Interface; USB
from Red Pitaya, d.o.o.
SIGNALlab 250-12 is most sophisticated Red Pitaya product, built for more demanding industrial applications and research, where robustness and performance matter more than cost. [See More]
- Signal Type: Analog; Digital
- Development Tool: Debugger / Debug Probe
- Category: Developement Board; Development Software
- Bus Width: 16-Bit; 12-bit; Other
from Synapse Wireless
Synapse provides reliable IEEE802.15.4 RF Engines®. These small, low-powered, 2.4 GHz transmitter-receiver modules can have a range of up to three miles and power consumption as low as 2.5 uA. The RF Engines come loaded with the Synapse SNAP® network operating system. Typical applications include a... [See More]
- Signal Type: Analog; Digital
- Development Tool: Break Out Board
- Category: Developement Board
- Bus Width: 10-Bit; Other
from ProMik Gmbh (Seattle Field Office)
ICTP2000 is a fully automated Flash/IC-Test Station for standalone use or integrated in the production environment. Combine In-Circuit Test, Flashing and Functional Test in one small footprint system, either integrated in your production line of off-line in a test-flash cell. [See More]
- Signal Type: Analog; Digital
- Development Tool: Break Out Board
- Category: Development Suite / Kit
- Supported System: Microcontroller
from Linx Technologies
The evaluation module contains the surface mount HumPRO ™ Series transceiver module and an MMCX connector on a single board with through-hole headers. This small board simplifies prototyping with the HumPRO ™ Series module. [See More]
- Signal Type: Digital
- Development Tool: Break Out Board
- Category: Developement Board
- Bus Width: 32-Bit
from EarthLCD, a division of Earth Computer Technologies, Inc.
Specifications. Full ezLCD Command Set. 8" 800x600, 18 bit Color TFT LCD, capable of 242,144 simultaneous colors. 220 Nits. Integrated Resistive Touch Screen. Embedded LCD Controller. Full Speed USB 2.0 Interface 480Mbits/s (via USB connector). Serial (true-RS232), I2c Interface, and SPI. Integrated... [See More]
- Signal Type: Digital
- Supported System: Video/Audio
- Category: Development Suite / Kit
- Manufacturer: EarthLCD; Other
from Critical Link, LLC
The MitySOM-AM62 Development Kit supports Critical Link ’s MitySOM-AM62 products, a family of modules based on Texas Instruments Sitara AM62xx. Each kit includes a compatible MitySOM-AM62 module (see Purchase table below for compatible modules) and a base board that together feature an array... [See More]
- Signal Type: Digital
- Development Tool: Debugger / Debug Probe
- Category: Development Suite / Kit
- Supported System: CPU; Multimedia
from ARM Inc.
The Keil MCB2140 Evaluation Board introduces you to the NXP (founded by Philips) LPC2140 ARM family and allows you to create and test working programs for this advanced architecture. The Keil MCB2140 Evaluation Board connects to your PC using the serial port (for Flash download using FlashMagic) or... [See More]
- Signal Type: Digital
- Manufacturer: ARM
- Category: Evaluation Board
- Ports: Serial Interface; USB
from Red Pitaya, d.o.o.
SIGNALlab 250-12 is most sophisticated Red Pitaya product, built for more demanding industrial applications and research, where robustness and performance matter more than cost. [See More]
- Signal Type: Analog; Digital
- Development Tool: Debugger / Debug Probe
- Category: Developement Board; Development Suite / Kit; Development Software
- Bus Width: 16-Bit; 12-bit; Other
from ProMik Gmbh (Seattle Field Office)
MSP2000NET is a dual-channel system based on a modular concept designed primarily for In-Line-Programming Systems. This concept allows for various options like galvanic isolation, dual-target interface, high-speed interface (e.g. 100MHz-JTAG), CAN, Flex-Ray, customized add-ons, etc. MSP2000NET can... [See More]
- Signal Type: Digital
- Development Tool: Programmer
- Category: Programmer
- Manufacturer: ProMik; Other
from EarthLCD, a division of Earth Computer Technologies, Inc.
Specifications. Full ezLCD Command Set. 3.5" 320x240, 24 bit Color TFT LCD. 350 Nits. Integrated Resistive Touch Screen. Embedded LCD Controller. Full Speed USB 2.0 Interface 480Mbits/s (via USB connector). RS232 TTL, and SPI. Integrated MicroSD/MMC (Secure Digital/MultiMedia) Memory Slot!. High... [See More]
- Signal Type: Digital
- Supported System: Video/Audio
- Category: Development Suite / Kit
- Manufacturer: EarthLCD; Other
from Critical Link, LLC
The MitySOM-C10L Development Kit supports Critical Link ’s Cyclone 10 FPGA-based modules. Each kit includes a compatible MitySOM-C10L module (see Purchase table below for compatible modules) and a base board that features on-board Debug UART to USB converter and 10/100/1000 Gb Ethernet... [See More]
- Signal Type: Digital
- Development Tool: Debugger / Debug Probe
- Category: Development Suite / Kit
- Supported System: FPGA
from ARM Inc.
The Keil MCB2370 Evaluation Board introduces you to the NXP LPC2378 microcontroller. It allows you to create and test working programs for this advanced architecture. Components Included. The MCB2370 Evaluation Board includes the following: MCB2300 Evaluation Board populated with an LPC2378,. [See More]
- Signal Type: Digital
- Manufacturer: ARM
- Category: Evaluation Board
- Ports: USB
from Red Pitaya, d.o.o.
STEMlab 125-14 4 Inputs is based on STEMlab 125-14 board, but instead of 2 inputs and 2 output channels offers 4 Input channels that with improved performance. [See More]
- Signal Type: Analog; Digital
- Development Tool: Debugger / Debug Probe
- Category: Developement Board; Development Suite / Kit; Development Software
- Bus Width: 16-Bit; 14-bit; Other
from ProMik Gmbh (Seattle Field Office)
MSP1000NET is an advanced programmer hardware based on fast Ethernet (10/100Mbit/s) communication to the host PC. The MSP1000NET programmer supports multiple target interfaces (BDM, SPI, SCI, I2C, etc.) as well as high speed communication and thereby significantly reducing the overall device... [See More]
- Signal Type: Digital
- Development Tool: Programmer
- Category: Programmer
- Supported System: CMOS
from EarthLCD, a division of Earth Computer Technologies, Inc.
ezLCD-001-EVALBOARD Evaluation Board for use with ezLCD-001 Display Module [See More]
- Signal Type: Digital
- Supported System: Video/Audio
- Category: Developement Board
- Manufacturer: EarthLCD; Other
from Critical Link, LLC
The MitySOM-5CSX Embedded Vision Development Kit (VDK) is a complete hardware and software framework designed to accelerate the development of vision applications. The kit offers an Intel/Altera Cyclone V SoC processor with integrated dual core ARMs and FPGA fabric, and is based on Critical Link... [See More]
- Signal Type: Digital
- Development Tool: Debugger / Debug Probe
- Category: Development Suite / Kit
- Supported System: FPGA
from ARM Inc.
The Keil MCB2470 Evaluation Board introduces the NXP LPC2470 ARM family, allowing you to create and test working programs for this architecture. Featuring the NXP LPC2478 MCU, the MCB2470 features a range of interfaces such as 3.2" Color QVGA LCD display with touch screen, USB (Host & OTG), CAN,... [See More]
- Signal Type: Digital
- Manufacturer: ARM
- Category: Evaluation Board
- Ports: USB
from Red Pitaya, d.o.o.
STEMlab 125-14 is our most versatile and popular product, which was introduced to the market in 2013 when Red Pitaya was established. Since then it has been used in a wide variety of contexts, from hobbyists and ham radio operators to industry, research, and space applications. [See More]
- Signal Type: Analog; Digital
- Development Tool: Debugger / Debug Probe
- Category: Developement Board; Development Suite / Kit; Development Software
- Bus Width: 16-Bit; 14-bit; Other
from ProMik Gmbh (Seattle Field Office)
SAP2000 is a cost effective and modular Semi-Automated Programming System for single or tandem applications. SAP2000 is based on MSP2000NET technology, supports high-speed programming for Microcontroller, high density NOR/NAND Flash memory and CPLD Applications. Includes ergonomic workbench, 19''... [See More]
- Signal Type: Analog; Digital
- Development Tool: Break Out Board
- Category: Development Suite / Kit
- Supported System: Microcontroller; CPLD, NOR/NAND Memory
from EarthLCD, a division of Earth Computer Technologies, Inc.
2.7" 240x160 small form factor TFT Color LCD Display. RS232 and USB interfaces. Multi-Font Text Layer. LCD controller supports 256 colors (LCD panel alone supports 512 colors). Default serial data rate of 115200 bauds (user-changeable to any standard speeds between 2400 and 115200 bauds). Includes... [See More]
- Signal Type: Digital
- Supported System: Video/Audio
- Category: Development Suite / Kit
- Manufacturer: EarthLCD; Other
from Critical Link, LLC
The Industrial IO Development Kit supports the OMAPL138 and AM1808 based modules from Critical Link. Each kit includes a compatible MityDSP-L138, MityDSP-L138F, MitySOM-1808, or MitySOM-1808F module (see Purchase table below for compatible modules) and a base board that features a strong array of... [See More]
- Signal Type: Digital
- Supported System: FPGA
- Category: Development Suite / Kit
- Ports: Ethernet; Serial Interface; USB
from ARM Inc.
The Keil MCBSTR750 Evaluation Board introduces you to the STMicroelectronics STR750 ARM family and allows you to create and test working programs for this advanced architecture. The Keil MCBSTR750 Evaluation Board connects to your PC using the serial port (for Flash download) or the JTAG interface... [See More]
- Signal Type: Digital
- Manufacturer: ARM
- Category: Evaluation Board
- Ports: USB
from Red Pitaya, d.o.o.
STEMlab 125-14 is our most versatile and popular product, which was introduced to the market in 2013 when Red Pitaya was established. Since then it has been used in wide variety of contexts, from hobbyists and ham radio operators to industry, research and space applications. [See More]
- Signal Type: Analog; Digital
- Development Tool: Debugger / Debug Probe
- Category: Developement Board; Development Suite / Kit; Development Software
- Bus Width: 16-Bit; 14-bit; Other
from EarthLCD, a division of Earth Computer Technologies, Inc.
Intelligent Programmable LCD Module with Touch Screen. FEATURES: Integrated Touch Screen (resistive). Programmable Display Module. Serial+USB+Parallel Interface. I2C/AVR/BASIC Stamp/VB Compatible. 64Kb Flash ROM (available for fonts & bitmaps). 1 Megabyte Flash ROM (use to be determined). [See More]
- Signal Type: Digital
- Supported System: Video/Audio
- Category: Development Suite / Kit
- Manufacturer: EarthLCD; Other
from Critical Link, LLC
The MitySOM-335x Maker Transition Kit is for developers looking to convert a maker board-based prototype to a production suitable design. Each kit includes a compatible MitySOM-335x module (see Purchase table below for compatible modules) and a Maker Transition base board that features interfaces... [See More]
- Signal Type: Digital
- Development Tool: Debugger / Debug Probe
- Category: Development Suite / Kit
- Host Interface: 1
from ARM Inc.
The Keil MCB2900 Evaluation Board introduces you to the NXP (founded by Philips) LPC2900 ARM family and allows you to create and test working programs for this advanced architecture. The Keil MCB2900 Evaluation Board connects to your PC using the JTAG interface (for program debug using a Keil ULINK... [See More]
- Signal Type: Digital
- Manufacturer: ARM
- Category: Evaluation Board
- Ports: USB
from Red Pitaya, d.o.o.
STEMlab 125-14 Edu Pack is based on Red Pitaya's best-selling DAQ platform and with the chosen accessories a perfect fit for educational purposes. [See More]
- Signal Type: Analog; Digital
- Development Tool: Debugger / Debug Probe
- Category: Developement Board; Development Suite / Kit; Development Software
- Bus Width: 16-Bit; 14-bit; Other
from Critical Link, LLC
In order to facilitate faster time to market, Critical Link developed a family of off-the-shelf hardware modules that provide a wide range of flexible I/O and data acquisition capability that is ready to roll with the MityDSP-6455F SoMs. The MityDSP-6455F Development Kit provides a mother card that... [See More]
- Signal Type: Digital
- Supported System: DSP; FPGA
- Category: Development Suite / Kit
- Ports: Ethernet; Serial Interface; USB
from ARM Inc.
The Keil MCB2929 Evaluation Board introduces the NXP LPC2900 family of ARM9 processor-based devices, allowing you to create and test working programs for this advanced architecture. The MCB2929 has a wide range of interfaces making it a great starting point for your next ARM project. MCB2929... [See More]
- Signal Type: Digital
- Manufacturer: ARM
- Category: Evaluation Board
- Ports: USB
from Red Pitaya, d.o.o.
STEMlab 125-14 External clock is based on the STEMlab 125-14 model that is modified to be used with an external clock oscillator, which is important especially for RF applications that operate at other frequencies, require better quality clock or clock synchronization. With this modification, users... [See More]
- Signal Type: Analog; Digital
- Development Tool: Debugger / Debug Probe
- Category: Developement Board; Development Suite / Kit; Development Software
- Bus Width: 16-Bit; 14-bit; Other