Insertion Type Mass Flow Meters and Controllers
from Panametrics
The PanaFlow MV82 insertion mass flow meter is a multivariable vortex flow meter for measuring volumetric flow, temperature, pressure, density and mass flow. It offers an advanced design and digital signal processing to isolate vibration. This meter is accurate, reliable and cost effective for... [See More]
- Mounting: Insertion
- End Fittings: Compression; Packing Gland Model Available
- Pipe Diameter: 2.00 to 72.00
- Process Media Type: Liquid; Gas; Steam
from Fluid Components Intl. (FCI)
The ST102A series is an all-new, thermal dispersion technology gas flow meter that combines the most feature- and function- rich electronics with the industry's most advanced flow sensors to achieve a truly state-of-the-science flow metering solution for industrial processes and plant applications. [See More]
- Mounting: Insertion
- Pipe Diameter: 2.50 to 100.00
- Meter Technology: Thermal
- End Fittings: In-line Flanged (optional feature); In-line Threaded (optional feature)
from Sierra Instruments, Inc.
With its advanced mass flow sensor capabilities, the Compod ™ control valve, coupled with Sierra ’s SmartTrak ® 100 mass flow meters (MFM ’s) or controllers (MFC ’s) greatly simplifies air flow control systems and permits networking of multiple instruments using... [See More]
- Mounting: Insertion
- Pipe Diameter: 1.00
- Meter Technology: Thermal
- End Fittings: Compression (optional feature); In-line Threaded (optional feature)
from Fluid Components Intl. (FCI)
The FLT93C insertion and inline type FlexSwitches for sanitary flow, level and temperature monitoring represents the first true technological breakthrough in thermal technology in over a decade. This product is specifically designed for sanitary 3A process applications. FCI is the only thermal... [See More]
- Mounting: Insertion
- End Fittings: In-line Flanged
- Meter Technology: Thermal
- Process Media Type: Liquid; Gas
from Sierra Instruments, Inc.
Steel-Mass ® 640S gas mass flow meters accurately monitor total gas mass flow rate of gases and insert easily into ducts and pipes up to 72-inches. Larger probe lengths are available upon request. Typical applications for gas mass flow meters include compressed air flow, aeration basin air flow,... [See More]
- Mounting: Insertion
- Pipe Diameter: 72.00
- Meter Technology: Thermal
- End Fittings: Compression; In-line Flanged (optional feature); Socket Weld / Union (optional feature); In-line Threaded (optional feature); Hot Tap
from Fluid Components Intl. (FCI)
The FLT93B BASIC insertion type FlexSwitch for flow and temperature monitoring represents the first true technological breakthrough in thermal technology in over a decade. FCI is the only thermal manufacturer providing temperature compensation to ensure set point accuracy for process temperatures... [See More]
- Mounting: Insertion
- Pipe Diameter: 0.75
- Meter Technology: Thermal
- End Fittings: In-line Threaded
from Sierra Instruments, Inc.
Overview. The InnovaSwitch insertion-type level switch is a high-performance, industrial-grade liquid level indicator for tanks and process vessels. This product switches on level changes as small as 0.03 inch (0.8 mm) on dry-to-wet and wet-to-dry occurrences in a tank or vessel. The instrument was... [See More]
- Mounting: Insertion
- End Fittings: In-line Threaded
- Meter Technology: Thermal
- Process Media Type: Liquid; Gas
from Fluid Components Intl. (FCI)
The FLT93F insertion type FlexSwitch for flow and temperature monitoring represents the first true technological breakthrough in thermal technology in over a decade. This product was designed for heavy industrial environments including high temperature and high pressure. FCI is the only thermal... [See More]
- Mounting: Insertion
- Pipe Diameter: 0.25 to 1.00
- Meter Technology: Thermal
- End Fittings: In-line Threaded
from Sierra Instruments, Inc.
QuadraTherm ® 640i insertion gas mass flow meters from Sierra Instruments mark a breakthrough in thermal dispersion technology as the most accurate thermal mass flow meters on the market. Sierra's 640i, gas mass flow meters offer many benefits of immersible thermal mass flow technology... [See More]
- Mounting: Insertion
- Pipe Diameter: 72.00
- Meter Technology: Thermal
- End Fittings: Compression (optional feature); In-line Flanged (optional feature); Socket Weld / Union (optional feature); In-line Threaded (optional feature); Hot Tap
from Fluid Components Intl. (FCI)
The FLT93S insertion type FlexSwitch for flow and temperature monitoring represents the first true technological breakthrough in thermal technology in over a decade. This product was designed for heavy industrial environments including high temperature and high pressure. FCI is the only thermal... [See More]
- Mounting: Insertion
- Pipe Diameter: 0.75 to 1.00
- Meter Technology: Thermal
- End Fittings: In-line Threaded
from Sierra Instruments, Inc.
Boiler-Trak ™ 620S-BT insertion thermal mass flow meters provide an economical and easy-to-install boiler and heater efficiency solution for natural gas flow measurement applications. 620S-BT insertion thermal mass flow meters are also suited for compliance to new regulations for burning... [See More]
- Mounting: Insertion
- Pipe Diameter: 3.70 to 24.00
- Meter Technology: Thermal
- End Fittings: Compression; Socket Weld / Union (optional feature); In-line Threaded
from Fluid Components Intl. (FCI)
The Model ST50 is a compact, low cost solution for accurate, repeatable flow rate measurement of air, compressed air or nitrogen. This insertion-style flow meter has no moving parts and is available in probe lengths for installation into pipe diameters from 2.5 inches to 24 inches [63 mm to 610 mm]. [See More]
- Mounting: Insertion
- Pipe Diameter: 2.00 to 24.00
- Meter Technology: Thermal
- Process Media Type: Gas
from Sierra Instruments, Inc.
Sierra was the first to introduce multivariable mass vortex flow meters to the market in the late 1990s with the InnovaMass "S-Series" product line-the 240S and 241S. The InnovaMass 241S inline version is a true workhorse in applications ranging from large pipes and ducts, to high pressure and... [See More]
- Mounting: Insertion
- End Fittings: In-line Flanged; Hot Tap
- Pipe Diameter: 0.50 to 72.00
- Process Media Type: Liquid; Gas; Steam
from Fluid Components Intl. (FCI)
The Model ST51 and ST51A are a compact, low cost solution for accurate, repeatable flow measurement of biogas, digester gas, landfill gas, methane and natural gas as well as air, compressed air or nitrogen. This insertion-style flow meter has no moving parts and is available in probe lengths for... [See More]
- Mounting: Insertion
- Pipe Diameter: 2.00 to 24.00
- Meter Technology: Thermal
- End Fittings: Compression
from Sierra Instruments, Inc.
Fast-Flo ® 620S insertion mass flow meters are the ideal mass flow meter for air and gases for light-industrial applications where a NEMA 4X (IP65) enclosure is acceptable. 620S mass flow meters have an accuracy is ± 1% of full scale, 0.2% of full scale repeatability, highly reliable 200... [See More]
- Mounting: Insertion
- Pipe Diameter: 1.00 to 48.00
- Meter Technology: Thermal
- End Fittings: Compression; Socket Weld / Union (optional feature); In-line Threaded (optional feature)
from Fluid Components Intl. (FCI)
Mass Flow Meter Summary. The MT100 Series is an insertion type, multipoint thermal flow meter specifically designed for large diameter pipes, such as stacks and flues, and large rectangular ducts, such as air feed intakes and HVAC. These large pipe/duct applications are difficult for ordinary flow... [See More]
- Mounting: Insertion
- Pipe Diameter: 2.00
- Meter Technology: Thermal
- End Fittings: MNPT or DIN50
from Sierra Instruments, Inc.
Sierra's Multi-Trak ™ Model 670S is an advanced state-of-the-art instrument for measuring mass flow rates in very large ducts or stacks that have non-uniform velocity profiles, high turn-down requirements, dirty gas streams, wide temperature ranges and fast velocity and temperature changes. [See More]
- Mounting: Insertion
- Pipe Diameter: 72.00
- Meter Technology: Thermal
- End Fittings: Compression (optional feature); In-line Flanged (optional feature); Hot Tap
from Fluid Components Intl. (FCI)
ST80 is a high performance, rugged thermal dispersion technology air/gas flow meter that combines ultra-reliable, feature-rich electronics with the industry's most extensive selection of application-matched flow sensors, including FCI's new "wet gas" flow element, to provide a truly superior... [See More]
- Mounting: Insertion
- Pipe Diameter: 2.00
- Meter Technology: Thermal
- Process Media Type: Gas
from Sierra Instruments, Inc.
Measure Flare Gas in Real Time. Meet EPA rule 40 CFR 63-measure flare gas down to 0.1 sfps (0.03 smps). qMix RealTime app connects, reads, and updates new flare gas composition from a GC-real time, no recalibration needed. Measure flow from 0.1 sfps to 120,000 sfpm (0.03 - 600 smps). Easy to install... [See More]
- Mounting: In-line; Insertion
- Process Media Type: Gas
- Meter Technology: Thermal
- Operating Pressure: 30 to 500
from E+E Elektronik
The EE776 is a thermal mass flow meter dedicated for monitoring compressed air, nitrogen, CO2 or other non-corrosive and non-flammable gases. It can be employed in pipes from DN50 to DN700 (2" to 28") and at up to 16 bar (232 psi). The EE776 flow meter set new standards in terms of safety and easy... [See More]
- Mounting: Insertion
- Pipe Diameter: 2.00 to 12.00
- Meter Technology: Thermal
- End Fittings: In-line Threaded
from OMEGA Engineering, Inc.
OMEGA ’s FST-320 Series thermal dispersion flow switches, especially designed for use with gases, sense changes in the heat transfer characteristics of the gases. Flow velocities from 1 to 90 fps are effectively monitored. The flow switch incorporates a standard SPST Relay switch output for... [See More]
- Mounting: Insertion
- Pipe Diameter: 0.75
- Meter Technology: Thermal
- End Fittings: In-line Threaded
from Siargo Ltd.
The insertion mass flow meter series are manufactured using Siargo's proprietary MEMS mass flow sensors and control electronics. They can be applied for large pipe (DN >100mm) gas monitor and measurement. [See More]
- Mounting: Insertion
- Pipe Diameter: 3.94 to 62.99
- Meter Technology: MEMS Flow Sensor
- End Fittings: In-line Threaded
from Spirax-Sarco
The RIM10 rotor insertion flowmeter utilizes multi-variable electronics to provide a compensated mass flowrate of liquid, gas and steam from a single opening in the pipeline. The RIM10 measures all process variables with a single device providing outstanding accuracy and reduces installation costs. [See More]
- Mounting: Insertion
- End Fittings: In-line Flanged
- Pipe Diameter: 3.00 to 80.00
- Process Media Type: Liquid; Gas; Steam
from Eldridge Products, Inc.
MP Series flow meters are approved for use in hazardous locations (see specifications). Insertion style thermal mass flow meters include a sensor & probe assembly that is inserted into the process gas flow conduit to allow the process gas to flow across the flow inlet tube. Our insertion style... [See More]
- Mounting: Insertion
- Pipe Diameter: 0.50 to 1.00
- Meter Technology: Thermal
- End Fittings: Tube End/Hose Nipple
from Litre Meter Limited
State-of-the-art in gaseous and liquid flow switching or liquid level control. High-resolution thermal differential technique. [See More]
- Mounting: Insertion
- Pipe Diameter: 0.98 to 787.40
- Meter Technology: Thermal
- End Fittings: Socket Weld / Union (optional feature)
from Bionetics
Rheotherm flow sensing probes for duct gases are easy to install and provide long-term service with little or no maintenance. The output can be in mass, standard volume or velocity units. Options for hazardous locations (intrinsically safe/explosion-proof) are available. [See More]
- Mounting: Insertion
- Pipe Diameter: 1.00 to ?
- Meter Technology: Thermal
- End Fittings: In-line Flanged (optional feature); In-line Threaded; Sanitary
from Nex Flow Air Products Corp.
The X-Stream ™ Air Flow Meter represents a radical departure from conventional air flow meter designs, providing easy installation, low cost and accurate of the probes in the air stream. The air flow meter clamps around a pipe with its probes projecting into the pipe through drilled holes. The... [See More]
- Mounting: Insertion
- Pipe Diameter: 1.00
- Meter Technology: Thermal
- End Fittings: In-line Clamp
from Aalborg Instruments
Vortices are created when a fluid passes around a bluff. body as shown below. Vortices are alternately shed on each. side of the body, 180 degrees out of phase to each other,. resulting in an oscillating pressure gradient. As flow. increases the frequency of vortices increases in proportion. to the... [See More]
- Mounting: In-line; Insertion
- End Fittings: In-line Flanged; In-line Threaded (optional feature); Wafer Flange, Welded End Fitting
- Pipe Diameter: 4.00
- Process Media Type: Liquid (optional feature); Gas (optional feature); Steam
from Eldridge Products, Inc.
Insertion style thermal mass flow meters include a sensor & probe assembly that is inserted into the process gas flow conduit to allow the process gas to flow across the flow inlet tube. Our insertion style flow meters are available with 1/2 ″, 3/4 ″, or 1 ″ OD probes. Tube... [See More]
- Mounting: Insertion
- Pipe Diameter: 0.50 to 1.00
- Meter Technology: Thermal
- End Fittings: Tube End/Hose Nipple
from Bionetics
Large increases in turbine back pressure are easily observed and corrective actions are taken promptly, but small amounts of excess back pressure often go unnoticed and can cost millions of dollars over the long haul. RheoVac instruments continuously monitor air in-leakage, exhauster capacity and... [See More]
- Mounting: Insertion
- Pipe Diameter: 3.00 to 18.00
- Meter Technology: Thermal
- End Fittings: In-line Flanged
from Eldridge Products, Inc.
MP Series flow meters are approved for use in hazardous locations (see specifications). Insertion style thermal mass flow meters include a sensor & probe assembly that is inserted into the process gas flow conduit to allow the process gas to flow across the flow inlet tube. Our insertion style... [See More]
- Mounting: Insertion
- Pipe Diameter: 0.50 to 1.00
- Meter Technology: Thermal
- End Fittings: Tube End/Hose Nipple
from Eldridge Products, Inc.
MPNH Series flow meters are approved for use in ordinary locations (see specifications). Insertion style thermal mass flow meters include a sensor & probe assembly that is inserted into the process gas flow conduit to allow the process gas to flow across the flow inlet tube. Our insertion style... [See More]
- Mounting: Insertion
- Pipe Diameter: 0.50 to 1.00
- Meter Technology: Thermal
- End Fittings: Tube End/Hose Nipple
from Eldridge Products, Inc.
Insertion style thermal mass flow meters include a sensor & probe assembly that is inserted into the process gas flow conduit to allow the process gas to flow across the flow sensing elements. Our insertion style flow meters are available with 1/2 ″, 3/4 ″, or 1 ″ OD probes. [See More]
- Mounting: Insertion
- Pipe Diameter: 0.50 to 1.00
- Meter Technology: Thermal
- End Fittings: Tube End/Hose Nipple
from Eldridge Products, Inc.
MP Series flow meters are approved for use in hazardous locations (see specifications). Insertion style thermal mass flow meters include a sensor & probe assembly that is inserted into the process gas flow conduit to allow the process gas to flow across the flow sensing elements. Our insertion... [See More]
- Mounting: Insertion
- Pipe Diameter: 0.50 to 1.00
- Meter Technology: Thermal
- End Fittings: Tube End/Hose Nipple
from Eldridge Products, Inc.
Insertion style thermal mass flow meters include a sensor & probe assembly that is inserted into the process gas flow conduit to allow the process gas to flow across the flow sensing elements. Our insertion style flow meters are available with 1/2 ″, 3/4 ″, or 1 ″ OD probes. [See More]
- Mounting: Insertion
- Pipe Diameter: 0.50 to 1.00
- Meter Technology: Thermal
- End Fittings: Tube End/Hose Nipple
from Eldridge Products, Inc.
Insertion style thermal mass flow meters include a sensor & probe assembly that is inserted into the process gas flow conduit to allow the process gas to flow across the flow sensing elements. Our insertion style flow meters are available with 1/2 ″, 3/4 ″, or 1 ″ OD probes. [See More]
- Mounting: Insertion
- Pipe Diameter: 0.50 to 1.00
- Meter Technology: Thermal
- End Fittings: Tube End/Hose Nipple
from Eldridge Products, Inc.
Insertion style thermal mass flow meters include a sensor & probe assembly that is inserted into the process gas flow conduit to allow the process gas to flow across the flow sensing elements. Our insertion style flow meters are available with 1/2 ″, 3/4 ″, or 1 ″ OD probes. [See More]
- Mounting: Insertion
- Pipe Diameter: 0.50 to 1.00
- Meter Technology: Thermal
- End Fittings: Tube End/Hose Nipple
from Eldridge Products, Inc.
Eldridge Products, Inc. has achieved innovation and excellence in thermal dispersion gas mass flow measurement since 1988. With an economical set of features and a number of common configuration and installation choices, our newest ValuMass ™ flow meters continue our tradition of solving flow... [See More]
- Mounting: Insertion
- Pipe Diameter: 0.25 to 2.00
- Meter Technology: Thermal
- End Fittings: Tube End/Hose Nipple
from Eldridge Products, Inc.
Insertion style thermal mass flow meters include a sensor & probe assembly that is inserted into the process gas flow conduit to allow the process gas to flow across the flow sensing elements. Our insertion style flow meters are available with 3/4 ″, or 1 ″ OD probes. Tube fittings... [See More]
- Mounting: Insertion
- Pipe Diameter: 0.75 to 1.00
- Meter Technology: Thermal
- End Fittings: Tube End/Hose Nipple
from Eldridge Products, Inc.
The Insertion style flow switch includes a sensor probe assembly which is inserted into the process conduit to allow the gas to flow across the sensors. The insertion style thermal mass flow switch probe assemblies may be inserted into any suitable flow section, pipe, duct, etc. Insertion flow... [See More]
- Mounting: Insertion
- Pipe Diameter: 0.50 to 1.00
- Meter Technology: Thermal
- End Fittings: In-line Threaded (optional feature); Tube End/Hose Nipple (optional feature)
from Eldridge Products, Inc.
Our ValuMass ™ Series 400 offer another lower cost option for many flow applications with the high value associated with all of EPI ’s flow measurement instrumentation. ValuMass ™ flow meters include a robust feature set: 0 – 5, 10 VDC, 4 – 20mA, RS485 Modbus RTU and... [See More]
- Mounting: Insertion
- Pipe Diameter: 0.25 to 2.00
- Meter Technology: Thermal
- End Fittings: Tube End/Hose Nipple