Tray / Rail Chip Inductors
from Coilcraft, Inc.
AEC-Q200 qualified; Ideal for a variety of automotive applications. 75% smaller than previous generation. Very low DCR maintains high efficiency. Soft saturation with high current handling capability. Magnetic shielding reduces power losses at high frequency. Ideal for Bi-directional 12 V – 48... [See More]
- Packing Method: Tray
- Molded / Shielded: Shielded
- Core Material: Powdered Iron; Powdered Iron
- Application: Power Choke
from DigiKey
Unshielded 2 Coil Inductor Array 10.4 µH Inductance - Connected in Series 2.6 µH Inductance - Connected in Parallel 10.9mOhm Max DC Resistance (DCR) - Parallel 7.2A Nonstandard [See More]
- Packing Method: Tray
- DCR: 0.0109 to 0.0436
- Inductance Tolerance: 10
- Operating Temperature: -40 to 130
from Coilcraft, Inc.
Coilcraft AEC-Q200 qualified AGP2923 Series power inductor is ideal for automotive applications and other high-temperature environments. AGP2923 power inductor, along with VER2923 and HA3588, is designed for high-efficiency power supplies requiring high current and high inductance. Four mounting... [See More]
- Packing Method: Tray
- Molded / Shielded: Shielded
- Core Material: Ferrite; Ferrite
- Application: Power Choke
from DigiKey
Shielded 4 Coil Inductor Array Inductance - Connected in Series Inductance - Connected in Parallel DC Resistance (DCR) - Parallel Nonstandard [See More]
- Packing Method: Tray
- Operating Temperature: -40 to 130
- Molded / Shielded: Shielded
from Coilcraft, Inc.
Coilcraft AEC-Q200 Grade-1 AGP4233 Series power inductor is ideal for automotive applications and other high-temperature environments. AGP4233 power inductors, along with VER2923 and HA3588, are designed for high-efficiency power supplies requiring high current and high inductance. Flat wire... [See More]
- Packing Method: Tray
- Molded / Shielded: Shielded
- Core Material: Ferrite; Ferrite
- Application: Power Choke
from DigiKey
Shielded 4 Coil Inductor Array Inductance - Connected in Series Inductance - Connected in Parallel DC Resistance (DCR) - Parallel 8-SMD, No Lead [See More]
- Packing Method: Tray
- Operating Temperature: -40 to 130
- Molded / Shielded: Shielded
from Coilcraft, Inc.
Coilcraft BCR Series conical inductors were designed specifically for broadband and high frequency applications, operating as a series of narrow-band inductors across a frequency range of 10 MHz to 40 GHz. They are ideal for use in ultra-wideband bias Tees. Their “flying leads ” allow... [See More]
- Packing Method: Tray
- Application: RF Choke
- Molded / Shielded: Shielded
- Standards and Certifications: RoHS
from DigiKey
Shielded 2 Coil Inductor Array 5.9 µH Inductance - Connected in Series 1.5 µH Inductance - Connected in Parallel 2.9mOhm Max DC Resistance (DCR) - Parallel 12.4A Nonstandard [See More]
- Packing Method: Tray
- Inductance Tolerance: 20
- Molded / Shielded: Shielded
- DCR: 0.0029 to 0.0120
from Coilcraft, Inc.
Significant noise attenuation over a wide range of frequencies. Compact size and light weight. Independent windings allow use in high-voltage signal lines. 1000 Vrms, one minute isolation (hipot) between windings. Refer to Designing Common Mode Filters for design guidance. RoHS-compliant. Tin-silver... [See More]
- Packing Method: Tray
- Molded / Shielded: Shielded
- Core Material: Ferrite; Ferrite
- Application: Common Mode Choke; Power Choke; RF Choke
from DigiKey
Shielded 2 Coil Inductor Array 42 µH Inductance - Connected in Series 10.5 µH Inductance - Connected in Parallel 17mOhm Max DC Resistance (DCR) - Parallel 6A Nonstandard [See More]
- Packing Method: Tray
- Inductance Tolerance: 20
- Molded / Shielded: Shielded
- DCR: 0.0170 to 0.0670
from Coilcraft, Inc.
Combines common and differential mode filtering in a single component. Can eliminate two extra filter chokes compared to standard common mode choke. Special windings and materials provides better filtering performance than common mode chokes or a single winding inductor alone. Refer to Designing... [See More]
- Packing Method: Tray
- Molded / Shielded: Shielded
- Core Material: Ferrite; Ferrite
- Application: Common Mode Choke; Power Choke; RF Choke
from DigiKey
Unshielded 3 Coil Inductor Array Inductance - Connected in Series Inductance - Connected in Parallel DC Resistance (DCR) - Parallel Nonstandard [See More]
- Packing Method: Tray
- Operating Temperature: -40 to 130
- Standards and Certifications: RoHS
from Coilcraft, Inc.
Best possible combination of low cost and high inductance. Two series with a variety of current ratings and inductance values. Refer to Designing Common Mode Filters for design guidance. RoHS-compliant. Tin-silver over tin over copper terminations. Samples of several values plus other chokes are... [See More]
- Packing Method: Tray
- Application: Common Mode Choke; Power Choke; RF Choke
- Molded / Shielded: Shielded
- Standards and Certifications: RoHS
from DigiKey
Shielded 3 Coil Inductor Array 150nH Inductance - Connected in Series Inductance - Connected in Parallel DC Resistance (DCR) - Parallel 6-SMD, No Lead [See More]
- Packing Method: Tray
- Inductance Tolerance: 15
- Molded / Shielded: Shielded
- DCR: ? to 3.00E-4
from Coilcraft, Inc.
D1787 Series high-current, high-inductance power inductors feature a flat-wire construction, resulting in exceptionally low DC resistance. They come in a wide range of sizes and inductance values for POL, VRM, VRD, and other high power applications. Developed for Texas Instruments LM5115DC Post... [See More]
- Packing Method: Tray
- Molded / Shielded: Shielded
- Core Material: Ferrite; Ferrite
- Application: Power Choke
from DigiKey
Shielded 4 Coil Inductor Array 200nH Inductance - Connected in Series Inductance - Connected in Parallel DC Resistance (DCR) - Parallel 8-SMD, No Lead [See More]
- Packing Method: Tray
- Inductance Tolerance: 15
- Molded / Shielded: Shielded
- DCR: ? to 3.00E-4
from Coilcraft, Inc.
Coilcraft DC1012 Series radial-leaded power inductors provide a low-cost, high-efficiency option for choke applications. They feature industry-standard lead spacing and are available in a wide range of inductance values and current ratings up to 9.5 Amps. Small and cost effective power inductors. [See More]
- Packing Method: Tray
- Application: Power Choke
- Molded / Shielded: Shielded
- Standards and Certifications: RoHS
from DigiKey
Shielded 5 Coil Inductor Array 250nH Inductance - Connected in Series Inductance - Connected in Parallel DC Resistance (DCR) - Parallel 10-SMD, No Lead [See More]
- Packing Method: Tray
- Inductance Tolerance: 15
- Molded / Shielded: Shielded
- DCR: ? to 3.00E-4
from Coilcraft, Inc.
Coilcraft DR0608 Series radial-leaded power inductors provide a low-cost, high-efficiency option for choke applications. They feature industry-standard lead spacing and are available in a wide range of inductance values and current ratings up to 9.5 Amps. Industry standard 3.5 mm lead spacing. [See More]
- Packing Method: Tape Reel; Tray
- Molded / Shielded: Shielded
- Core Material: Ferrite; Ferrite
- Application: Power Choke
from DigiKey
320 µH @ 100kHz 2 Line Common Mode Choke Surface Mount 28A DCR 2.5mOhm [See More]
- Packing Method: Tray
- DCR: 0.0025
- Application: Common Mode Choke; RF Choke
- Rated DC Current: 28000
from Coilcraft, Inc.
Coilcraft DR0810 Series radial-leaded power inductors provide a low-cost, high-efficiency option for choke applications. They feature industry-standard lead spacing and are available in a wide range of inductance values and current ratings up to 9.5 Amps. Industry standard 5 mm lead spacing. PVC... [See More]
- Packing Method: Tape Reel; Tray
- Molded / Shielded: Shielded
- Core Material: Ferrite; Ferrite
- Application: Power Choke
from DigiKey
CMC 1.86MH 1A 2LN SMD AEC-Q200 [See More]
- Packing Method: Tray
- DCR: 0.2420
- Application: Common Mode Choke; RF Choke
- Rated DC Current: 1000
from Coilcraft, Inc.
Coilcraft's ED0006-AL toroidal power choke has flat inductance vs current characteristics. It was developed as a Class-D low-pass filter element. Developed for the Zetex ZXCD1210 analog input Class-D modulator. Also recommended by Zetex for their ZXCD1000 high fidelity Class- D amplifier solution. [See More]
- Packing Method: Tray
- Molded / Shielded: Shielded
- Technology: Toroid
- Application: Power Choke
from DigiKey
CMC 27.8UH 1A 2LN SMD AEC-Q200 [See More]
- Packing Method: Tray
- DCR: 0.2420
- Application: Common Mode Choke; RF Choke
- Rated DC Current: 1000
from Coilcraft, Inc.
Low cost and high performance choke coil. UL1446 Class B (130 °C) Insulation System (UL File E83628). Designed to reduce AC line conducted common mode noise produced by switching power supplies. Refer to Designing Common Mode Filters for design guidance. [See More]
- Packing Method: Tray
- Application: Common Mode Choke; Power Choke; RF Choke
- Molded / Shielded: Shielded
- Standards and Certifications: RoHS
from DigiKey
1 µH @ 10kHz 2 Line Common Mode Choke Surface Mount 10mA DCR 10mOhm [See More]
- Packing Method: Tray
- DCR: 0.0100
- Application: Common Mode Choke; RF Choke
- Rated DC Current: 10000
from Coilcraft, Inc.
• Designed for ON Semiconductor for their 300 Watt, wide mains, PFC stage, driven by the NCP1654 PFC Controller. • Shown as L1 on Application Note AND8324/D. • High inductance: 650 μH; high saturating current: 6.3 A [See More]
- Packing Method: Tray
- Molded / Shielded: Shielded
- Core Material: Ferrite; Ferrite
- Application: RF Choke
from DigiKey
CMC 5MH 6A 2LN 15 KOHM SMD [See More]
- Packing Method: Tray
- DCR: 0.0500
- Application: Common Mode Choke; RF Choke
- Rated DC Current: 6000
from Coilcraft, Inc.
HA3588-BL Series power inductor, along with VER2923, is designed for high-efficiency power supplies requiring high current and high inductance. Flat wire windings provide extremely low DC and AC resistance. Low loss ferrite cores provide flat L vs I. Magnetic shielding to minimize EMI. Vertical (TH)... [See More]
- Packing Method: Tray
- Molded / Shielded: Shielded
- Core Material: Ferrite; Ferrite
- Application: Power Choke
from DigiKey
10mH @ 10kHz 2 Line Common Mode Choke Surface Mount 1A DCR 450mOhm [See More]
- Packing Method: Tray
- DCR: 0.4500
- Application: Common Mode Choke; RF Choke
- Rated DC Current: 1000
from Coilcraft, Inc.
Coilcraft ’s L0451 Series of high-current, radial-lead unshielded inductors are vertical-mount power chokes which have an open magnetic flux path for high current handling without saturation and have 130 °C class insulation. Developed for ON Semiconductor MC33163 & MC34163 Power... [See More]
- Packing Method: Tray
- Application: Power Choke
- Core Material: Ferrite; Ferrite
- Standards and Certifications: RoHS
from DigiKey
22mH @ 10kHz 2 Line Common Mode Choke Surface Mount 300mA DCR 1.5Ohm (Typ) [See More]
- Packing Method: Tray
- DCR: 1.5
- Application: Common Mode Choke; RF Choke
- Rated DC Current: 300
from Coilcraft, Inc.
Coilcraft MA5172/3-AE, PA6331-AE toroidal power chokes were designed for Class-D applications. Low distortion chokes used in Texas Instrument ’s TPA3251D2 PurePath Ultra-HD, TAS5612/14PHD2EVM, TAS5612PHD and TAS5614PHD evaluation modules. Designed for use in Class-D amplifiers. [See More]
- Packing Method: Tray
- Core Material: Powdered Iron; Powdered Iron
- Technology: Toroid
- Molded / Shielded: Shielded
from DigiKey
CMC 820UH 24A 2LN SURFACE MOUNT [See More]
- Packing Method: Tray
- DCR: 0.0022
- Application: Common Mode Choke; RF Choke
- Rated DC Current: 24000
from Coilcraft, Inc.
Combined common and differential mode filtering in a single component. Provide differential filtering at higher frequencies ( >1000 Ohms @ 50 MHz). 2000 Vrms, one minute isolation (hipot) between windings. AEC-Q200 qualified. Refer to Designing Common Mode Filters for design guidance. [See More]
- Packing Method: Tray
- Molded / Shielded: Shielded
- Core Material: Ferrite; Ferrite
- Application: Common Mode Choke; Power Choke; RF Choke
from DigiKey
CMC 470UH 28A 2LN SURFACE MOUNT [See More]
- Packing Method: Tray
- DCR: 0.0014
- Application: Common Mode Choke; RF Choke
- Rated DC Current: 28000
from Coilcraft, Inc.
Coilcraft AEC-Q200 Grade-1 RA7338 Series power inductors are ideal for automotive applications and other high-temperature environments. RA7338 Series are designed for high-efficiency power supplies requiring high current and high inductance. Developed for Microchip 1600W Bus Balancer Reference... [See More]
- Packing Method: Tray
- Molded / Shielded: Shielded
- Core Material: Ferrite; Ferrite
- Application: Power Choke
from DigiKey
CMC 300UH 10A 2LN 900 OHM SMD [See More]
- Packing Method: Tray
- DCR: 0.0074
- Application: Common Mode Choke; RF Choke
- Rated DC Current: 10000
from Coilcraft, Inc.
Coilcraft RFB0807 Series unshielded, radial-leaded inductors are a low-cost option for general-purpose applications. High-reliability extended temperature versions of many series are available for space, military, and other critical applications. RFB0807 Series are cost-reduced higher inductance... [See More]
- Packing Method: Tray
- Application: Power Choke
- Core Material: Ferrite; Ferrite
- Standards and Certifications: RoHS
from DigiKey
CMC 90UH 31A 2LN 380 OHM SMD [See More]
- Packing Method: Tray
- DCR: 0.0015
- Application: Common Mode Choke; RF Choke
- Rated DC Current: 20000
from Coilcraft, Inc.
Coilcraft RFB0810 Series unshielded, radial-leaded inductors are a low-cost option for general-purpose applications. High-reliability extended temperature versions of many series are available for space, military, and other critical applications. RFB0810 Series are cost-reduced higher inductance... [See More]
- Packing Method: Tray
- Application: Power Choke
- Core Material: Ferrite; Ferrite
- Standards and Certifications: RoHS
from DigiKey
Line Common Mode Choke DCR [See More]
- Packing Method: Tray
- DCR: 0.0070
- Application: Common Mode Choke; RF Choke
- Rated DC Current: 10000
from Coilcraft, Inc.
Coilcraft RFB1010 Series unshielded, radial-leaded inductors are a low-cost option for general-purpose applications. High-reliability extended temperature versions of many series are available for space, military, and other critical applications. RFB1010 Series are cost-reduced higher inductance... [See More]
- Packing Method: Tray
- Application: Power Choke
- Core Material: Ferrite; Ferrite
- Standards and Certifications: RoHS
from DigiKey
4 Line Common Mode Choke Surface Mount 600mA DCR 65mOhm [See More]
- Packing Method: Tray
- DCR: 0.0650
- Application: Common Mode Choke; RF Choke
- Rated DC Current: 600
from Coilcraft, Inc.
Coilcraft RFC0807B Series unshielded, radial-leaded inductors are a low-cost option for general-purpose applications. RFC0807B Series are cost-reduced higher inductance versions. Open magnetic path. Rugged through-hole (TH) mount construction. High saturation current ratings. Ferrite core gives flat... [See More]
- Packing Method: Tape Reel; Tray
- Application: Power Choke
- Core Material: Ferrite; Ferrite
- Standards and Certifications: RoHS
from DigiKey
CMC 100UH 100MA 2LN SMD AEC-Q200 [See More]
- Packing Method: Tray
- DCR: 4.2
- Application: Common Mode Choke; RF Choke
- Rated DC Current: 100
from Coilcraft, Inc.
Coilcraft RFC0807BV Series power inductors are a high-voltage version of our RFC0807B Series. Their operating voltage is rated at 800 V, which is significantly higher than comparable products in the market. They offer a cost-effective solution for high-voltage, universal off-line (non-isolated)... [See More]
- Packing Method: Tape Reel; Tray
- Molded / Shielded: Shielded
- Core Material: Ferrite; Ferrite
- Application: Power Choke
from DigiKey
1mH @ 1kHz 2 Line Common Mode Choke Surface Mount 3.5A DCR 50mOhm [See More]
- Packing Method: Tray
- DCR: 0.0500
- Application: Common Mode Choke; RF Choke
- Rated DC Current: 3500
from Coilcraft, Inc.
Coilcraft RFC0810B Series unshielded, radial-leaded inductors are a low-cost option for general-purpose applications. RFC0810B Series are cost-reduced higher inductance versions. Open magnetic path. Rugged through-hole (TH) mount construction. High saturation current ratings. Ferrite core gives flat... [See More]
- Packing Method: Tape Reel; Tray
- Application: Power Choke
- Core Material: Ferrite; Ferrite
- Standards and Certifications: RoHS
from DigiKey
2 Line Common Mode Choke Surface Mount 16A DCR 4.25mOhm [See More]
- Packing Method: Tray
- DCR: 0.0043
- Application: Common Mode Choke; RF Choke
- Rated DC Current: 16000
from ITG Electronics, Inc.
10uH, 10%, 2.3mOhm, 37Amp Max. DIP Flat Wire Inductor [See More]
- Packing Method: Tray
- Core Material: Ferrite
- Technology: Flat Wire Inductor
- Devices in Package: 1