Epoxy (EP) Caulk, Grout, and Joint Compounds
from ACCRAbond, Inc.
INSTAbond ® Big Green 8121 -- A highly effective epoxy compound designed to use as a chocking or grouting material. The cured material is designed for service in environments that require high compression strength, wide range of service temperatures and environment resistance to water, oils,... [See More]
- Chemical System: Epoxy
- Type / Form: Sealant
from Sherwin-Williams Protective & Marine Coatings
STEEL-SEAM FT910 EPOXY PATCHING AND SURFACING COMPOUND is a 100% solids epoxy surfacing compound for steel or patching compound for concrete. It is formulated for ease of application with squeegee or trowel on horizontal, vertical or overhead applications. 100% solids, zero VOC. Tolerates moisture... [See More]
- Chemical System: Epoxy
- Composition: Unfilled
- Type / Form: Leveling Filling; Sealant; Liquid
- Cure / Technology: Thermoset; Single Component; Reactive or Moisture Cured
from Rust-Oleum Corporation
Ideally suited to resist vibration, high torque loads & physical stresses [See More]
- Chemical System: Epoxy
- Composition: Filled
- Type / Form: Leveling Filling; Liquid
- Cure / Technology: Thermoset; Two Component ; Room Temperature Vulcanizing or Curing
from Sauereisen, Inc.
Sauereisen Aguapoxy No. 28 is a three component, water cleanable, general purpose epoxy grout for bonding chemical resistant masonry units. The No. 28, combined with brick or tile, offers rapid installation and clean up with potable water. The water cleanable feature of Aguapoxy No. 28 is designed... [See More]
- Chemical System: Epoxy
- Cure / Technology: Two Component
- Type / Form: Sealant; Liquid; Powder
- Substrate Compatibility: Concrete, Masonry