80-50 Scratch / Dig UV Filters
from Newport MKS
The 10BPF10-206 UV Bandpass Filter is a 1 inch (25.4 mm) diameter bandpass filter with a center wavelength of 206 ± 2 nm and a Full Width Half Max of 12 ± 2 nm. See Curve 1, for transmission graph. Our UV Bandpass Filters pass a narrow spectral band of ultraviolet radiation and reject... [See More]
- Surface Quality: 80-50 Scratch / Dig; 80-50 scratch-dig
- Filter Diameter, Side Length, or Rectangular Length: 25.4
- Filter Type: Bandpass / Interference Filters; Bandpass Filters
- Thickness: 5.08
from Changchun Yutai Optics Co., Ltd.
Bandpass Filters are used to selectively transmit a portion of the spectrum while rejecting all other wavelengths. Yutai Optics offers a wide variety of Bandpass Filters in a range of bandwidth options for ultraviolet (UV), visible (VIS), or infrared (IR) applications. Laser Line filters typically... [See More]
- Surface Quality: 60-40 Scratch / Dig; 80-50 Scratch / Dig
- Thickness: 0.5000 to 6
- Filter Type: Bandpass / Interference Filters
- Substrate Material: BK7 glass; Fused Silica
from Changchun Yutai Optics Co., Ltd.
Longpass Filters, also known as Longpass Edge Filters, are designed to transmit wavelengths greater than the cut-on wavelength of the filter. Longpass Filters are commonly used to isolate portions of the spectrum in a variety of industrial or life sciences applications including microscopy or... [See More]
- Surface Quality: 60-40 Scratch / Dig; 80-50 Scratch / Dig
- Thickness: 0.5000 to 6
- Filter Type: Long Pass Filters
- Substrate Material: BK7 glass; Fused Silica
from Changchun Yutai Optics Co., Ltd.
Shortpass Filters, also known as Shortpass Edge Filters, are used to transmit wavelengths shorter than the cut-off wavelength of the filter. Shortpass Filters are typically designed for a 0 ° Angle of Incidence, whereas Shortpass Dichroic Filters are designed for use at a 45 ° Angle of... [See More]
- Surface Quality: 60-40 Scratch / Dig; 80-50 Scratch / Dig
- Thickness: 0.5000 to 6
- Filter Type: Short Pass Filters
- Substrate Material: BK7 glass; Fused Silica
from Thorlabs, Inc.
At Thorlabs, we constantly reinforce our desire to serve at the pleasure of our customers. From this comes our desire to be connected to our industry in a way that far exceeds what would typically be expected of a vendor. Thorlabs lives this core principle by seeking to enhance, at every turn, the... [See More]
- Surface Quality: 60-40 Scratch / Dig; 80-50 Scratch / Dig
- Filter Shape: Circular; Rectangular
- Filter Type: Bandpass / Interference Filters
- Filter Diameter, Side Length, or Rectangular Length: 12.5 to 25.4
from Foctek Photonics, Inc.
Applications. Biomedical. Fluorescence Microscope. Laser System. Inspection Apparatus. Selective Interference. Hg Lamp Spectrum. Analyzing Spectrum. Imaging Optics Systems [See More]
- Surface Quality: 40-20 Scratch / Dig; 80-50 Scratch / Dig
- Filter Shape: Circular
- Filter Type: Bandpass / Interference Filters
- Filter Diameter, Side Length, or Rectangular Length: 12 to 24
from Changchun Sunday Optics Co., Ltd.
Optical Mirrors are used for beam turning, interferometry, imaging, or illumination.Using polished glass or metal as the substrate, the light beam hits the surface to form mirror reflection.In order to obtain as much reflected light as possible, the substrate is often coated with a reflective... [See More]
- Surface Quality: 10-5 Scratch / Dig; 80-50 Scratch / Dig
- Filter Shape: Circular
- Filter Type: Long Pass Filters
- Filter Diameter, Side Length, or Rectangular Length: 2 to 200
from Ross Optical Industries
These types of filters are used to pass certain narrow wavelength band with high transmission and block the un-wanted light. The pass band can be very narrow such as 10nm or very wide depending on your specific application. Rejection band are deeply blocked with OD from 3 to 5 or above. Our line of... [See More]
- Surface Quality: 80-50 Scratch / Dig
- Filter Shape: Circular
- Filter Type: Bandpass / Interference Filters
- Filter Diameter, Side Length, or Rectangular Length: 5
from Edmund Optics Inc.
UV, VIS, IR Ranges. Circular and Square Sizes Available. An optical bandpass filter has a transmission band surrounded by two blocking bands that allow only a portion of the spectrum to pass. These optical bandpass filters have broad spectral bandwidths in either the ultraviolet, visible, or... [See More]
- Surface Quality: 80-50 Scratch / Dig
- Filter Diameter, Side Length, or Rectangular Length: 25.4
- Filter Type: Color Filters; Bandpass / Interference Filters
- Thickness: 2.5
from Rapid Spectral Solutions
Neutral density filters available in a wide range of optical densities and sizes. These filters are suitable for all general use. [See More]
- Surface Quality: 10-5 Scratch / Dig; 20-10 Scratch / Dig; 40-20 Scratch / Dig; 60-40 Scratch / Dig; 80-50 Scratch / Dig
- Filter Shape: Circular; Square; Rectangular
- Filter Type: Neutral Density Filters
- Filter Diameter, Side Length, or Rectangular Length: 6.25 to 100
from Changchun Sunday Optics Co., Ltd.
Optical Mirrors are used for beam turning, interferometry, imaging, or illumination.Using polished glass or metal as the substrate, the light beam hits the surface to form mirror reflection.In order to obtain as much reflected light as possible, the substrate is often coated with a reflective... [See More]
- Surface Quality: 10-5 Scratch / Dig; 80-50 Scratch / Dig
- Filter Shape: Circular
- Filter Type: Bandpass / Interference Filters
- Filter Diameter, Side Length, or Rectangular Length: 2 to 200