Machine Tool Electric Clutches
from SG Transmission
The Ball Bearing (B.B) mounted clutch offers a low-cost and simple option for the transmission of motion in a drive train. The B.B clutch is used for mounting onto shafts for high speed or force applications. Specific applications can be catered for and many fixing options are available depending on... [See More]
- Application: Industrial; Machine Tool; Other; Machinery, Leisure
- Power: 0.0134 to 0.0670
- Torque: 2.2 to 177.0
- Voltage: 12 to 24
from SG Transmission
The flange mounted (F.M) clutch offers a low-cost and simple option for the transmission of motion in a drive train. The F.B clutch is used for mounting directly to the motor or gearbox bodies. F.M clutches are the least complicated to fit and have machined bores and flange sections allowing the... [See More]
- Application: Industrial; Machine Tool; Other; Machinery, Leisure, Energy
- Power: 0.0067 to 0.0871
- Torque: 0.2 to 177.0
- Voltage: 12 to 24
from SG Transmission
The drag torque on the low cost slip clutch is produced by means of a hysteresis principle. This allows for constant torque levels and eliminates the possibility of high break away torque that occurs with typical friction devices. Permanent magnets and magnetic particles transmit torque therefore... [See More]
- Application: Industrial; Machine Tool; Other; Machinery
- Speed: 200 to 400
- Torque: 0.0 to 0.3
- Magnetic Type: Hysteresis
from SG Transmission
Magnetic particle clutches and brakes have been designed to maintain high performance in continuous slip applications through maximum and continuous heat dissipation. The use of high wear resistant particles assures long operational life in high cycle applications. Key Features. Voltage Linear To... [See More]
- Application: Industrial; Machine Tool; Other; Machinery
- Mounting: Shaft
- Shaft: In-line
from SG Transmission
The Sleeve Bearing (S.B) clutch offers a low-cost and simple option for the transmission of motion in a drive train. The S.B clutch is used for mounting onto shafts where lower forces and speeds are required. Specific applications can be catered for and many fixing options are available depending on... [See More]
- Application: Industrial; Machine Tool; Other; Machinery
- Power: 0.0080 to 0.0241
- Torque: 0.4 to 11.8
- Voltage: 12 to 24
from SG Transmission
The Toothed Clutch offers a higher torque than conventional, single face friction clutches. The clutch may be engaged while at a standstill or synchronized with the toothed driving ring speed. This product can be used dry or in oil and will work up to a maximum temperature of 90 °C. This toothed... [See More]
- Application: Industrial; Machine Tool; Other; Machinery
- Power: 0.0268 to 0.0389
- Torque: 18.4 to 81.1
- Engagement: Toothed