Stop Sleeve / Plug Wire Rope Fittings and Cable Fittings
from Certex UK
End stops for crane rope applications. Features: These end stops are designed for full load applications of rotation resistant and low rotation ropes. The chamfered surface around the cylinder matches different fitting devices. The bore of the end stop is slightly conical to distribute the stress... [See More]
- Type: Stop Sleeve
- Material: Steel; Mild carbon steel.
- Diameter: 0.5118
- Application: Power and Public Utility
from Certex UK
End Stops for crane rope applications. Type ESP has an inspection hole and is prepared for an RFID chip and gives the possibility to check tests and certificates of the product. Featueres:These end stops are designed for full load applications of rotation resistant and low rotation ropes. The... [See More]
- Type: Stop Sleeve
- Material: Steel; Mild carbon steel.
- Diameter: 0.9055
- Application: Power and Public Utility
from Certex UK
Round ferrule (R) is intended to be pressed on single layer round strand wire ropes, for instance on preventer wires or used as end stop. The expected strength regarding this end-termination is approximately 50% of the MBL of the wire rope (informative only). Round aluminium end stops are not... [See More]
- Type: Stop Sleeve
- Material: Aluminum; Aluminum
from Certex UK
Round copper ferrule (RCU) is intended to be pressed on single round strand wire ropes, for instance on preventer wires or used as end stop. Copper as material suits well together with stainless steel wire rope, to avoid galvanic corrosion in saltwater environments. The expected strength regarding... [See More]
- Type: Stop Sleeve
- Material: Bronze / Copper Alloy; Copper (almost 99,9%)
from Certex UK
Safety Factor: Standard: Certex Standard [See More]
- Type: Stop Sleeve
- Application: Power and Public Utility
- Material: Steel; Steel
from Loos & Co., Inc.
Zinc die cast fittings perform just as well as traditional fittings in most applications. They hold cable breaking strength when properly designed and manufactured. Intricate designs and threads allow for better performance than many more expensive machined parts. By eliminating secondary operations... [See More]
- Type: Stop Sleeve
- Material: Galvanized; Zinc Alloy, Zamak 5
- Diameter: 0.1250
- Application: Commercial; Aircraft Cable; Mining; Oil & Gas Wells; Rigging, Lashing or other Material Handling; Marine; Elevator; Power and Public Utility; Forestry; Transit; Automotive or Vehicular