12 Volt Variable Speed Motor

Description: valves. There are no valves to clog, no seals to leak. The 115-VAC CSA-approved wall power supply ensures that a safe 12 volts drive the pump motor. Comes with a battery connector for portable use with any 9 or 12-volt battery. Pump draws so little power it will

Description: 3384 Variable-Speed Pump -- Ultra-Low Flow 0.005 to 0.900 ml/minute Cat. No. 3385 Variable-Speed Pump -- Low Flow 0.03 to 8.20 ml/minute Cat. No. 3386 Variable-Speed Pump -- Medium Flow 0.4 to 85.0 ml/minute Cat. No. 3389 Variable-Speed Pump --

• Maximum Discharge Flow: 0.00047550969 GPM
• Media Temperature: 500 F
• Power Source: AC Powered
• Pump Type: Peristaltic Pumps, Positive Displacement Pumps, Self-Priming Pump

Description: PITTMAN® slotless brushless motor designs offer many advantages over conventional slotted stator construction. Negligible magnetic cogging provides improved servo performance and enables extremely smooth motion even at low speeds. Low inductance and high current bandwidth results in

• Other DC Voltage: 12 to 60.6 VDC
• Torque Constant: 2.163 to 11.238 in-oz/amp
• Other Output Power: 0.0281446280829592 to 0.0321652892376677 HP
• Continuous Current: 0.63 to 3.24 amps

Description: that is found in millions of OEM systems nationwide, Evergreen uses up to 25% fewer watts in operating mode and up to 74% fewer Watts than a PSC motor in constant fan. Evergreen motors are not approved to replace existing ECM Variable Speed or X13 motors, should

• Other Output Power: 0.5 to 1 HP
• Output Power: 1 HP, 1/2 HP
• AC Voltage & Frequency: 115 / 120V 60 Hz, 208-230 / 240V 60 Hz, 50 Hz / International Power
• Motor Type: AC Motor

Description: speed • Adjustable maximum speed • Adjustable minimum speed • Adjustable I.R. compensation • Adjustable current limit • Adjustable acceleration speed • Maintains variable speed control as batteries discharge 5K ohm speedpot with leads, knob and dial

• Number of Axes / Motors: 1
• Continuous Output Current: 60 amps
• Supply Voltage (DC): 12 to 36 volts
• Operating Temperature: -10 to 45 C

Description: 3384 Variable-Speed Pump -- Ultra-Low Flow 0.005 to 0.900 ml/minute Cat. No. 3385 Variable-Speed Pump -- Low Flow 0.03 to 8.20 ml/minute Cat. No. 3386 Variable-Speed Pump -- Medium Flow 0.4 to 85.0 ml/minute Cat. No. 3389 Variable-Speed Pump --

• Maximum Discharge Flow: 0.625 GPM
• Media Temperature: 200 F
• Power Source: AC Powered
• Features: Other

Description: Rated for 10 amps continuous current, the 65E10 is a high performance PWM control for 12, 24, and 36-volt battery powered equipment. Features include adjustable maximum speed, minimum speed, current limit, I.R. compensation, and acceleration, plus a quiet operating

• Number of Axes / Motors: 1
• Maximum Output Voltage: 10.2 to 13.8 volts
• Continuous Output Current: 10 amps
• Supply Voltage (DC): 10.2 to 13.8 volts

Description: •Variable speed trigger and 2-speed motor •Ultimate precision and control in both forward and reverse 18-Volt 1.5Ah Lithium-Ion Compact Pro Impact Driver (WH18DSAL) •1,280 In/Lbs of torque for heavier applications •Faster impact driving with a no-load speed

Description: A high performance control for 12, 24, and 36 volt battery powered equipment providing smooth control with high efficiency. The 65 Series is a pulse width modulated battery control utilizing power FET's. The control's advanced design permits a substantial increase in the equipment

• Number of Axes / Motors: 1
• Maximum Output Voltage: 30.6 to 41.4 volts
• Continuous Output Current: 60 amps
• Supply Voltage (DC): 30.6 to 41.4 volts

Description: application requirements. The NFX9000 volts-per-hertz product line utilizes a 32-bit microprocessor and insulated gate bipolar transistors (IGBTs) which provide quiet motor operation, high motor efficiency and smooth low speed performance. The size and simplicity of the

• Number of Axes / Motors: 1
• Rated Power: 186.53648520510126 watts
• Continuous Output Current: 1.6 amps
• Supply Voltage (AC): 90 to 130 volts

Description: volts-per-hertz product line utilizes a 32-bit microprocessor and insulated gate bipolar transistor (IGBTs) which provides quiet motor operation, high motor efficiency and smooth low speed performance. The size and simplicity of the NFX9000 make it ideal for hassle-free

• Maximum Output Voltage: 90 to 240 volts
• Rated Power: 186.53648520510126 to 1,492.29188164081 watts
• Supply Voltage (AC): 100 to 240 volts
• Operating Temperature: -10 to 40 C

Description: Canarm/Leader P Series Direct Drive Panel Exhaust Fans. 12 Inch, 1650 nominal CFM, Single/Variable Speed,115/230V,1 phase Panel exhaust fan, sturdily constructed, direct drive, horizontal discharge for industrial, commercial and farm applications. Durable powder coat finish.

Description: 48mm Brushless Variable Speed Gear Motor 12v Diameter: 48mm Length : 70-101 mm Voltage: 12V Gearbox: Metarl CNC Matched Motor Type: BLDC motor Applications: medical equipment, scientific instruments, industrial equipment, etc. Options: Lead wires length, Shaft

• Other DC Voltage: 12 VDC
• Gearbox Ratio: 3.65 to 393 : 1
• Diameter / Width: 1.8897648 inch
• Housing Length: 2.755907 to 3.9763801 inch

Description: Canarm/Leader AX Series Direct Drive Exhaust Fans With Shutters. 12 inch, 1650 nominal CFM, Single/Variable Speed,115/230V, 1 phase Sturdily constructed, direct drive, horizontal discharge for industrial, commercial and farm applications. Suitable for general ventilation of

Description: expanded metal front for easy visibility of chain operation. : C-flange motor mount permits positive drive for more torque and increased efficiency. : Variable metering speeds : Four- and six-blade rotors are designed to meter larger foreign objects. : 10-gauge HR housing formed

• Volumetric Capacity: 4,620.005855215754 ft³/hr
• Application / Operation: Metering
• Feeder Type: Star Feeder / Rotary Airlock
• Flow Control: Volumetric

Description: Frequency drive with dynamic braking available. Standard Equipment 3 h.p. 230/460 Volt Motor (Totally Enclosed Fan Cooled Ball Bearing Double Shaft Motor) Infinitely Variable Speed 40-5000 F.P.M. Speed Indicator Balanced Cast Aluminum Pulleys, Ball Bearing

• Cutting Capacity: 12 to 24 inch
• Power Type: AC Power
• Machine Type: Band Saw
• Cutting Type: Manual

Description: • Variable-flow reversible peristaltic pump • Run dry without damage to pump • Compact footprint These new cost-conscious peristaltic pumps provide variable flow and exceptional life performance in a compact package. Select from four different motor speeds, and several

• Maximum Discharge Flow: 0.02245462425 GPM
• Power Source: DC Powered
• Pump Type: Metering Pumps, Peristaltic Pumps

Description: • Variable-flow reversible peristaltic pump • Run dry without damage to pump • Compact footprint These new cost-conscious peristaltic pumps provide variable flow and exceptional life performance in a compact package. Select from four different motor speeds, and several

• Maximum Discharge Flow: 0.15850323 GPM
• Power Source: DC Powered
• Pump Type: Metering Pumps, Peristaltic Pumps

Description: • Variable-flow reversible peristaltic pump • Run dry without damage to pump • Compact footprint These new cost-conscious peristaltic pumps provide variable flow and exceptional life performance in a compact package. Select from four different motor speeds, and several

• Maximum Discharge Flow: 0.00047550969 GPM
• Power Source: DC Powered
• Pump Type: Metering Pumps, Peristaltic Pumps

Description: • Variable-flow reversible peristaltic pump • Run dry without damage to pump • Compact footprint These new cost-conscious peristaltic pumps provide variable flow and exceptional life performance in a compact package. Select from four different motor speeds, and several

• Maximum Discharge Flow: 0.00216621081 GPM
• Power Source: DC Powered
• Pump Type: Metering Pumps, Peristaltic Pumps

Description: ISOLATORS - ELECTRONIC VARIABLE SPEED CONTROL - 4 EA EYEBOLT HANGING SUPPORTS - ANNODIZED ALUMINUM PROTECTIVE GRILL - 85LBS - 115 VOLT - 60HZ - W/ CUSTOM HEPA DISCHARGE FITTINGS

• Design: Axial
• Environment: Clean Air / Gas
• Features: Other
• Product Form: Packaged (Complete System)

Description: Completely manufactured in USA. Standard Equipment 3 h.p. 230/460 Volt Motor (Totally Enclosed Fan Cooled Ball Bearing Double Shaft Motor) Infinitely Variable Speed 40-5000 F.P.M. Speed Indicator Balanced Cast Aluminum Pulleys, Ball Bearing Mounted, Oil

• Cutting Capacity: 12 to 24 inch
• Power Type: AC Power
• Machine Type: Band Saw
• Cutting Type: Manual

Description: include a cord and plug IP55/NEMA 12 motor Variable speed control from 500 - 10,000 rpm (+/- 1% speed accuracy) Color touch screen control and display including RPM, percent of load, batch timer and temperature (up to 300°F or 150°C) Electronic pushbutton lift

• Capacity: 0.04010416388165528 to 0.5347221850887371 cubic feet
• Motor Speed: 500 to 10,000 rpm
• Motor Power: 1 HP
• Applications / Industry: Adhesives Processing, Chemical Processing, Cosmetics Processing, Food and Beverage Processing, Paint / Coating Processing, Pharmaceutical Processing

Description: The PONY EXPRESS Motorized Electric Lift Platform Cart is battery operated with an electric lift platform to bring materials to an ergonomic height for loading or unloading. MODEL 1050-EL • Electric lift • Front wheel transaxle drive system • Non-marking tires • Variable speed control

• Capacity: 1,000 lbs
• Stroke: 45.5 inch
• Length: 43.5 inch
• Width: 23 inch

Description: variable torque speed range along with a 4:1 constant torque. Energy Savings The Energy $aver TEFC meets US Government EISAct efficiency levels and also meets NEMA Premium efficiency levels (NEMA MG1 table 12-12). This motor design has been tested per IEEE 112

• Other Output Power: 1 to 250 HP
• Shaft Speed: 1,200 to 3,600 rpm
• NEMA Frame Size: 143 to 449 #
• Operating Temperature: -40 to 104 F

Description: Voltman TRMS Voltmeter with Continuity Tester If you need a continuity function or harmonics are a problem then the Voltman TRMS is for you. Non sinusoidal waveforms from variable speed motors cause problems for most meters but the Voltman TRMS meter is specifically designed to

• DC Voltage Range: 750 volts
• AC Voltage Range: 750 volts
• Display Digits: 3 Digits, Plus 1/2 Digit
• Measurement Type: AC / DC

Description: Capacities 1,000 lbs (450 kg) to 2,000 lbs (910 kg) Retractable drive allows cart to be pushed sideways Colors Multiple shelving and draw combinations Easy to use controls Maintenance free permanent magnet motor, and non-marking tires Variable speed control Horn, key switch and

• Capacity: 1,000 to 2,000 lbs
• Features: Adjustable / Removable Shelves, Brake, Motorized, Other
• Material: Aluminum, Steel
• Cart / Truck Type: Cabinet Cart

Description: Maximum Operating Temperature of 149°F (65°C) Impeller Blades Made of Plastic PA66 or Galvanized Steel Capable of Working with PWM (Pulse Width Modulation), Linear and 5 Volt (2 Pulse Per Rev) Tach Output Controls for Variable Speed Operation 24 VDC or 48 VDC and Select

Description: transfer tops Bellow safety skirting Safety tape switch Safety touch bars Drive Unit/electrics 24 volt system Variable speed control - forward/reverse Built in 24 volt charger Control head Butterfly switches for forward and reverse Push buttons for raising and lowering of

• Capacity: 6,000 lbs
• Stroke: 36 inch
• Length: 48 inch
• Width: 24 inch

Description: the flexibility to precisely configure an Integrity Series pump to meet an OEM’s specific flow and pressure requirements. Equipped with an integrated 12 to 24 volt brushless DC variable speed motor, the INTG7 Series magnetically coupled centrifugal pumps

• Maximum Discharge Flow: 22 GPM
• Maximum Discharge Pressure: 75 psi
• Discharge Size: 1 inch
• Media Temperature: 203 F

Description: 1.1 These requirements cover enclosed medium voltage power conversion equipment, such as variable frequency controllers, that control and transfer power to motors. These requirements also cover power-supply modules, input/output modules, and electronic assemblies, for use in or with

Description: temperature control. Variable speed control. Lock-out switch. Optional pressure bar attachment. The MELTCATOR hot melt adhesive applicator is equipped with an electronically controlled thermostat that provides variable temperature control. The speed of the roller is also

• Application: Adhesive / Silicone

Description: controls, 110 volt, single phase, 60 cycles actuated through a transformer for operation on 230 or 460 volts. Wired to National Electrical Code Standards unless otherwise specified. Equipped with a power factor controller for energy conservation. Attachment automatically adjusts the

• Power: 15 to 25 HP
• AC Voltage & Phase: 115 / 120 V 60 Hz, 208 - 230 / 240 V 60 Hz, 460 / 480 V 60 Hz, 50 Hz / International Power, Three-Phase
• Automation / Material Handling: Automatic / Indexing, PLC
• Applications / Materials Abraded: Biotech / Medical Devices, Ceramics / Glass, Metals / Metalworking, Ophthalmic / Optical, Plastics / Composites, Semiconductors / Electronics, Wet Finishing