-
Supplier: Accuris
Description: CARBON DISULFIDE
-
Supplier: Pfaltz & Bauer, Inc.
Description: Carbon disulfide 95%
-
Supplier: Accuris
Description: CARBON DISULFIDE, TECHNICAL GRADE
-
-
Supplier: GFS Chemicals, Inc.
Description: ITEM#:884 CS2 CAS#:75-15-0 F.W.:76.13 NFPA#:3-3-0 Specific Gravity: 1.261 DOT:3/6.1/I Descriptions: Specification TEST 1. Assay 99.9% min 2. Color (APHA) 10 max 3. Residue after evaporation 0.002% 4. Hydrogen sulfide - Pass Test 5. Sulfur dioxide - Pass Test 6. Water 0.05% Properties No properties.
- State of Matter: Liquid / Solution
- Type: Solvent
-
Supplier: Chemical Strategies, Inc.
Description: Chemical Strategies offers over 3,000 products by JT Baker. If you are unable to locate a chemical you need, our sales department can custom source any needed materials for you directly.
-
Supplier: Accuris
Description: Japanese Language - CARBON DISULFIDE (REAGENT)
-
Supplier: Accuris
Description: ACCEPTABLE CONCENTRATIONS OF CARBON DISULFIDE
-
Supplier: Medical Isotopes, Inc.
Description: Tricyclohexyl-d 33 -phosphine Carbon Disulfide Complex
-
Supplier: Chemical Strategies, Inc.
Description: Chemical Strategies offers over 3,000 products by Columbus Chemical, Inc. If you are unable to locate a chemical you need, our sales department can custom source any needed materials for you directly.
-
Supplier: GFS Chemicals, Inc.
Description: ITEM#:1859 CS2 CAS#:75-15-0 F.W.:76.13 NFPA#:3-3-0 Specific Gravity: 1.261 DOT:3/6.1/I Descriptions: Specification TEST 1. Assay (GLC) 99.9% min 2. Color (APHA) 10 max 3. Residue after evaporation 0.002% 4. Hydrogen sulfide - Pass Test 5. Sulfur dioxide - Pass Test 6. Water 0.05% 7. Benzene 0.0001%
- Classical Arenes: All Classical Arenes, Benzene
- State of Matter: Liquid / Solution
- Type: Solvent
-
Description: Description / Abstract Scope and Purpose This standard applies to occupational exposure to carbon disulfide in all places of employment. The largest amount of carbon disulfide (approximately 70 percent) is used in the viscose industry. Carbon disulfide is
-
Supplier: ASTM International
Description: Test Method for Carbon Disulfide in Benzene
-
Supplier: ASTM International
Description: Test Method for Carbon Disulfide in Benzene (Withdrawn 1993)
-
Supplier: Medical Isotopes, Inc.
Description: Tri-iso-propyl-d 21 -phosphine (Carbon Disulfide Complex)
-
Supplier: ASTM International
Description: Practice for Safety and Health Requirements Relating to Occupational Exposure to Carbon Disulfide (Withdrawn 1995)
-
Description: ISO 1833-13:2006 specifies a method, using carbon disulfide/acetone, to determine the percentage of chlorofibre, after removal of non-fibrous matter, in textiles made of mixtures of certain chlorofibres, whether after-chlorinated or not, and wool, animal hair, silk, cotton, viscose,
-
Supplier: R. S. Hughes Company, Inc.
Description: built as a rectangle. This product is written in English with the following text: CARBON DISULFIDE. Some signs support inside use only, while others can be used indoors or out. This part has the flexiblity to be used both indoor or outside. There are a variety of standards that signs
- Backing / Base: Specialty / Other
- Type: HAZMAT (Hazardous Material)
-
Supplier: CSA Group
Description: ISO 1833-13:2006 specifies a method, using carbon disulfide/acetone, to determine the percentage of chlorofibre, after removal of non-fibrous matter, in textiles made of mixtures of certain chlorofibres, whether after-chlorinated or not, and wool, animal hair, silk, cotton, viscose,
-
Supplier: ASTM International
Description: 1.1 This test method describes a procedure primarily for the determination of hydrogen sulfide, carbonyl sulfide, methyl mercaptan, and carbon disulfide (Table 1) in hydrogen fuels for fuel cell vehicles (FCV) by gas chromatograph with sulfur chemiluminescence detection. The reporting
-
Supplier: AENOR
Description: Textiles - Quantitative chemical analysis - Part 13: Mixtures of certain chlorofibres with certain other fibres (method using carbon disulfide/acetone) (ISO 1833-13:2019)
-
Supplier: AENOR
Description: Textiles - Quantitative chemical analysis - Part 13: Mixtures of certain chlorofibres and certain other fibres (method using carbon disulfide/acetone) (ISO 1833-13:2006)
-
Supplier: Restek
Description: Conc. In Solvent and Volume: 2,000 µg/mL each in hexane:carbon disulfide (80:20), 1 mL/ampul
- Form: Liquids
-
Supplier: McGee Industries, Inc. / McLube Division
Description: Synthetic oil dispersion containing molybdenum disulfide. Will not leave carbon or resinous deposits. Excellent lubricant for high temperature applications like oven chains.
- Chemistry / Constituents: Molybdenum / Metal Sulphide, Synthetic / Semi-synthetic, Specialty / Other
- Type: Fluid / Oil, Micro-dispersion
-
Supplier: Kin-Tek Laboratories Inc.
Description: Generate moderate concentrations of high vapor pressure compounds such as SO2, H2S, NH3, Cl2, etc. and very low concentrations of low vapor pressure compounds such as carbon disulfide, methylene chloride, nitric acid, etc.
- Applications: Calibration Gas / Gas Standard, Laboratory / Analytical
- Composition: Pure Gas
- Disposable: Yes
- Halogens and Halides: Other
-
Supplier: McGee Industries, Inc. / McLube Division
Description: Synthetic oil dispersion containing molybdenum disulfide which will not leave carbon or resinous deposits. Designed to protect against wear, rust, and corrosion at elevated temperatures and can withstand repeated loads in excess of 400,000 psi.
- Chemistry / Constituents: Molybdenum / Metal Sulphide, Synthetic / Semi-synthetic, Specialty / Other
- Type: Fluid / Oil, Micro-dispersion
-
Description: Specifies a potentiometric method for components in natural gas in the concentration range equal to or above 1 mg/m3. The gas must be free of dust, mist, oxygen, hydrogen cyanide and carbon disulfide. The method is not recommended for gases containing more than approximately 1,5 %
-
Supplier: AGC Chemicals Americas, Inc.
Description: Composed of pigments and fillers such as glass, carbon, graphite and metal powders (bronze and molybdenum disulfide), Fluon® Filled PTFE Compounds are molding powders that enhance wear resistance, creep resistance, thermal conductivity and electrical conductivity over virgin PTFE
- Chemical / Polymer System Type: Fluoropolymer (PTFE / PVDF)
- Elongation: 250 %
- Filler Material: Carbon / Graphite, Metal, Mineral
- Industry: Automotive
-
Supplier: CSA Group
Description: Specifies a potentiometric method for components in natural gas in the concentration range equal to or above 1 mg/m3. The gas must be free of dust, mist, oxygen, hydrogen cyanide and carbon disulfide. The method is not recommended for gases containing more than approximately 1,5 %
-
Supplier: IKO International, Inc.
Description: Steel-on-steel spherical bushings are well suited for applications that involve alternate loads and shock loads. Widely used in industrial and construction equipment. High carbon chromium bearing steel used for inner and outer rings. Phosphate
- Bore Diameter: 0.1575 to 11.81 inch
- Design Units: Inch, Metric
- Length Through Bore: 0.1969 to 8.27 inch
- Load Capacity: 528 to 991368 lbs
-
Supplier: R. S. Hughes Company, Inc.
Description: Chloronite® glove, protects against chemicals & liquids such as Methanol, Acetone, Acetonitrile, Dichloromethane, Carbon Disulfide, Diethylamine, Tetrahydrofuran, Ethyl Acetate, n-Heptan, Sodium Hydroxide, Sulphuric Acid 96%, Unleaded Petrol, Methyl ethyl ketone, Xylene and Skydrol.
- Application: Chemical
-
Supplier: R. S. Hughes Company, Inc.
Description: The hi-vis red Chloronite® chemical glove has been given National Stock Numbers (NSN) from the U.S. Government; it meets the EN 374 ABCDEGHIJKL standards that protects against Methanol, Acetone, Acetonitrile, Dichloromethane, Carbon Disulfide, Diethylamine, Tetrahydrofuran, Ethyl
- Application: Chemical
-
Description: in ISO 1833-12 and ISO 1833-13, in all cases where a preliminary test shows that the chlorofibres do not dissolve completely either in dimethylformamide or in the azeotropic mixture of carbon disulfide and acetone.
-
Supplier: ASME Standards and Certification
Description: Chapter 5: Materials for Micro and Nanotribology: Molybdenum Disulfide (MoS2) and Carbon Nanotubes (CNT) Chapter 6: Materials for Micro and Nanotribology: Liquid Crystals, Fluid Films, and Other Lubricants Chapter 7: Gas Phase Lubrication Index top of page
-
Supplier: ASME
Description: Chapter 5: Materials for Micro and Nanotribology: Molybdenum Disulfide (MoS2) and Carbon Nanotubes (CNT) Chapter 6: Materials for Micro and Nanotribology: Liquid Crystals, Fluid Films, and Other Lubricants Chapter 7: Gas Phase Lubrication Index top of page
-
Supplier: CSA Group
Description: in ISO 1833-12 and ISO 1833-13, in all cases where a preliminary test shows that the chlorofibres do not dissolve completely either in dimethylformamide or in the azeotropic mixture of carbon disulfide and acetone.
-
Supplier: Serfilco, Ltd.
Description: while handling liquids over 1.8 specific gravity. Additionally the Series 'FE' is capable of running dry without damage when equipped with the standard carbon bushing and under optimum operating conditions. This helps protect the pump from operator errors and system upsets. Their innovative
-
Supplier: Serfilco, Ltd.
Description: while handling liquids over 1.8 specific gravity. Additionally the Series 'FE' is capable of running dry without damage when equipped with the standard carbon bushing and under optimum operating conditions. This helps protect the pump from operator errors and system upsets. Their innovative
Find Suppliers by Category Top
Featured Products Top
-
Fluon+ Filled PTFE Compounds Fluon+ Filled PTFE Compounds are composed of pigments and fillers such as glass, carbon, graphite and metal powders (bronze and molybdenum disulfide). These (read more)
Browse Resins and Compounds Datasheets for AGC Chemicals Americas, Inc. -
compounds are composed of pigments and fillers such as glass, carbon, graphics and metal powders (bronze and molybdenum disulfide). These molding powders offer enhanced wear resistance, creep resistance, thermal conductivity and electrical conductivity over virgin PTFE resins. Filled PTFE (read more)
Browse Resins and Compounds Datasheets for AGC Chemicals Americas, Inc. -
Fluon+ Filled PTFE Compounds Fluon+ Filled PTFE Compounds are composed of pigments and fillers such as glass, carbon, graphite and metal powders (bronze and molybdenum disulfide). These (read more)
Browse Datasheets for AGC Chemicals Americas, Inc. -
to a variety of components that contain carbon steel, corrosion resistant steel alloys, titanium and other common aerospace metals. Advantages Everlube Product We meet your toughest performance (read more)
Browse Solid and Dry Film Lubricants Datasheets for Everlube Products -
be applied to a variety of components that contain carbon steel, corrosion resistant steel alloys, titanium and other common aerospace metals. We meet your toughest performance specifications Capitalize on (read more)
Browse Industrial Coatings Datasheets for Everlube Products
More Information Top
-
Carbon disulfide (EHC 10, 1979)
CARBON DISULFIDE .
-
Carbon Disulfide (CICADS 46, 2002)
CARBON DISULFIDE .
-
Aromatic Hydroxyketones: Preparation & Physical Properties
mol. wt. 178.23 Syntheses -Preparation by reaction of n-butyryl chloride with anisole, *in the presence of aluminium chloride in carbon disulfide , first at 0 for 2 h, then .
-
Aromatic Hydroxyketones: Preparation and Physical Properties
Syntheses Preparation by condensation of benzotrichloride,– with phenol in the presence of aluminium chloride in carbon disulfide at 0°• (90%) [125] or in the presence of zinc oxide in a water bath [126]; with p-bromophenol in 30% sodium hydroxide solution …
-
Sampling and analysis of water from Upper Three Runs and its wetlands near Tank 16 and the Mixed Waste Management Facility
Carbon disulfide .
-
Handbook of Hydroxyacetophenones: Preparation and Physical Properties
-Preparation by reaction of acetyl chloride on 2,3,5,6-tetra- fluorophenol with aluminium chloride in carbon disulfide at 5° (10%) [720].
-
Data Summary Report D-Area Burning/Rubble Pits
1,1,2-Trichloroethane 1,l-Dichloroethone 1,l-Dichloroethylene 1,2-Dichloroethane 1,2-Dichloroethylene 1,2-Dichloropropane 2-Chloroethylvinyl ether 2-Hexanone Acetone Benzene Bromodichloromethnnc Bromoform Bromomethane(Methyl bromide) Carbon disulfide Carbontetrachloride Chlorobenzene Chloroethane Chloroethene(Vinyl chloride) Chloroform Chloromethane(Methyl …
-
The Savannah River Site`s Groundwater Monitoring Program. Second quarter 1994
Cadmium Cadmium, dissolved Cadmium, total recoverable Calcium Calcium, dissolved Calcium, total recoverable Carbofuran Carbon-I4 Carbonate Carbon disulfide Carbon tetrachloride Ceri~m-141~ Cerium-144 cesium-I 34d Cesium-I37 Chlordane Chloride 4-Chloroaniline Chlorobenzene Chlorobenzilate 4-Chloro-m-cresol Chloroethane Chloroethene(Vinyl …
-
The Savannah River Site's Groundwater Monitoring Program First Quarter 2000 (January through March 2000)
Final PDWS (EPA, 1998a) Carbon disulfide .
-
Carbon disulfide (PIM 102)
Carbon disulfide .