Products & Services
See also: Categories | Featured Products | Technical Articles | More Information-
Supplier: Haida International Equipment Co., Ltd.
Description: This High low temperature tensile strength tester can do tensile test, tear test, peel test, bond test with different clamps for textile, fabric, leather,tape, film and other kind of materials with high low temperature environment. This tensile test
- Force / Load Capacity: 11,240 lbs
- Test Speed: 0.0003937007874015742 to 11.811023622047225 in/min
- Display / User Interface: Application Software, Computer Interface, Digital Readout / Interface
- Mechanical Test: Tensile
-
Supplier: Haida International Equipment Co., Ltd.
Description: Software can issue report with results for max. force, elongation, tensile strength, peel strength, tear strength, compression strength, etc. 4.Tests Tensile Test Compression Test Peel Test Bend Test Tear Test Shear Test Sustomizable test properties
- Force / Load Capacity: 110.25 lbs
- Test Speed: 1.9685039370078707 to 11.811023622047225 in/min
- Display / User Interface: Application Software, Computer Interface, Digital Readout / Interface
- Mechanical Test: Tensile
-
Supplier: CSA Group
Description: ISO 8256:2004 specifies two methods (method A and method B) for the determination of the tensile-impact strength of plastics under defined conditions. The tests can be described as tensile tests at relatively high strain rates. These methods can be used for rigid
-
-
Supplier: Shenzhen You-San Technology Co., Ltd.
Description: P1214D high strength fiberglass filament tape Also known as industrial grade fiberglass tape (filament tape) ，uses polyester food packaging material film glass fiber as the substrate, milky white high-strength unidirectional dense fiber tape, special adhesive, with
- Thickness: 0.005511811023622047 inches
- Features: Anti-static / ESD Control, Electrically Conductive, Single-Sided Adhesive
- Backing: Filament, Glass / Fiberglass, PET / Polyester, Plastic / Polymer
- Adhesive: Rubber
-
Description: ISO 8256:2004 specifies two methods (method A and method B) for the determination of the tensile-impact strength of plastics under defined conditions. The tests can be described as tensile tests at relatively high strain rates. These methods can be used for rigid
-
Supplier: Haida International Equipment Co., Ltd.
Description: defined deformation of tested sample Software can issue report with results for max. force, elongation, tensile strength, peel strength, tear strength, compression strength, etc. This universal test equipent can do different test as per customer requirement such as
- Force / Load Capacity: 441 lbs
- Test Speed: 1.9685039370078707 to 11.811023622047225 in/min
- Mechanical Test: Adhesion (Bond / Peel), Compressive, Creep / Stress Relaxation, Ductility, Fatigue / Cyclic, Flexure / Bending, Friction / Wear, Shear / Torsion, Tensile, Universal
- Display / User Interface: Digital Readout / Interface
-
Supplier: Budnick Converting, Inc.
Description: Scotch® Strapping Tape 8898 is a general-purpose tape with a tensilized polypropylene film backing and pressure-sensitive synthetic adhesive. The tape is designed for a wide variety of industrial and packaging applications. Some typical applications include bundling, reinforcing, strapping,
- Thickness: 0.0046 inches
- Peel Strength / Adhesion: 4.6875 lbs/in
- Materials of Construction: Plastic / Polymer
- Features: Specialty / Other
-
Fabricated Plastic Parts and Semi-Finished Shapes - CHEMFILM® High Modulus Skived PTFE Film -- T-500Supplier: Saint-Gobain Tape Solutions
Description: CHEMFILM® T-500 High Modulus Skived PTFE Film is an oriented, skived PTFE film engineered for critical dimensional and electrical applications. T-500 also has the same thermal and chemical resistance characteristics as our T-100 skived film with the advantage of higher
- Overall Thickness: 0.002 to 0.005 inch
- Overall Width: 18 to 24 inch
- Tensile Strength (Break): 10,000 psi
- Elongation: 125 %
-
Supplier: Haida International Equipment Co., Ltd.
Description: This series of Tensile Tester is widely used in wires & cables, hardware, metal, rubber, footwear, leather, apparel, fabric, tape paper products, pharmacy and so on, for tensile strength, tear resistance, peel strength, bend strength, shear force, ect with
- Force / Load Capacity: 11,025 lbs
- Test Speed: 0.003937007874015741 to 11.811023622047225 in/min
- Display / User Interface: Application Software, Computer Interface, Digital Readout / Interface
- Mechanical Test: Tensile
-
Supplier: Shiu Li Technology Co., Ltd
Description: LiPOLY PR27 is a very thin high insulator with a thickness of 0.15mm. It uses Polyimide Film as the reinforcement material, which can increase the tensile strength. It has great dielectric strength and can withstand 12K voltages. It’s suitable for high power
- Applied Thickness / Gap Fill: 0.005905515 inch
- Use Temperature: -76 to 356 F
- Thermal Conductivity: 1.8 W/m-K
- Industry: Electronics
-
Supplier: TransPak
Description: Blue tensilized polypropylene film strapping tape has high strength and removes cleanly. Also great to use for palletizing. Tensilized polypropylene backing with stiffness for handling ease. Typically 160 lbs./in. width tensile strength for general strapping on
-
Strapping and Filament Tapes - 1/2" x 60 yds. - 3M - 8898 Tensilized Poly Strapping Tape -- T9138898Supplier: TransPak
Description: Blue tensilized polypropylene film strapping tape has high strength and removes cleanly. Also great to use for palletizing. Tensilized polypropylene backing with stiffness for handling ease. Typically 160 lbs./in. width tensile strength for general strapping on
-
Supplier: TransPak
Description: Blue tensilized polypropylene film strapping tape has high strength and removes cleanly. Also great to use for palletizing. Tensilized polypropylene backing with stiffness for handling ease. Typically 160 lbs./in. width tensile strength for general strapping on
-
Supplier: TransPak
Description: Blue tensilized polypropylene film strapping tape has high strength and removes cleanly. Also great to use for palletizing. Tensilized polypropylene backing with stiffness for handling ease. Typically 160 lbs./in. width tensile strength for general strapping on
-
Supplier: Custom Fabricating & Supplies
Description: temperature and chemical resistance No adhesive residue even after long delay in removal after wave soldering Construction 1 Mil Polyester Film 6 Mil Crepe Paper 10 Mil Total Thickness Roll Length - 36 yards Specifications Tensile Strength (lb/in) - 45 Elongation (%) - 10 Steel
- Width: 0.25 to 2 inches
- Peel Strength / Adhesion: 2.8125 lbs/in
- Temperature Resistance: -17.77777777777778 to 260 C
- Backing: Paper
-
Supplier: DeWAL
Description: DW 502 is a skived, tensilized PTFE (Polytetrafluoroethylene) film held to close tolerance on width and thickness. DW 502 conforms to Mil-P-22241B. The tensilizing process yields a film with greatly enhanced tensile and dielectric strength. Excellent Tensile
- Industry: Aerospace, Automotive, Electric Power, General Industrial
- Material Type: Dielectric / Electrically Insulating
- Form / Shape: Film / Sheet
- Chemical System: Fluoropolymer (PTFE / PVDF)
-
Supplier: R. S. Hughes Company, Inc.
Description: 3M 583 brown hot melt adhesive is compatible with metal and plastic materials. Additonally, this hot melt adhesive is a high melt adhesive. Delivers great performance with a shear strength of 750 psi, tensile strength of 400 to 3140 psi and peel strength of 11 piw.
- Cure / Technology: Thermoplastic / Hot Melt
-
Supplier: R. S. Hughes Company, Inc.
Description: 3M 583 brown hot melt adhesive is compatible with metal and plastic materials. Additonally, this hot melt adhesive is a high melt adhesive. Delivers great performance with a shear strength of 750 psi, tensile strength of 400 to 3140 psi and peel strength of 11 piw.
- Cure / Technology: Thermoplastic / Hot Melt
-
Supplier: R. S. Hughes Company, Inc.
Description: 3M 583 brown hot melt adhesive is compatible with metal and plastic materials. Additonally, this hot melt adhesive is a high melt adhesive. Delivers great performance with a shear strength of 750 psi, tensile strength of 400 to 3140 psi and peel strength of 11 piw.
- Cure / Technology: Thermoplastic / Hot Melt
-
Supplier: R. S. Hughes Company, Inc.
Description: 3M 583 brown hot melt adhesive is compatible with metal and plastic materials. Additonally, this hot melt adhesive is a high melt adhesive. Delivers great performance with a shear strength of 750 psi, tensile strength of 400 to 3140 psi and peel strength of 11 piw.
- Cure / Technology: Thermoplastic / Hot Melt
-
Supplier: Redwood Plastics
Description: Redco™ LDPE is defined by a density range of 0.910 – 0.940 g/cc. This results in a lower tensile strength and increased ductility. Redco™ LDPE is used for both rigid containers and plastic film applications such as plastic bags and film wrap. Redco™ Polyethylenes are
- Industry: Building / Construction, General Industrial, Marine
- Form / Shape: Extruded Profile, Film / Sheet
- Chemical System: Polyethylene (PE)
- Features: Thermoplastic
-
Supplier: Shenzhen You-San Technology Co., Ltd.
Description: Double Sided PET tape is made of PET film as the base material and coated with special acrylic pressure-sensitive adhesive on both sides. It has excellent adhesion, good Initial Tack and stickiness, good high humidity resistance, excellent aging resistance, excellent high and
- Thickness: 1.968503937007874 inches
- Temperature Resistance: 80 C
- Adhesive: Acrylic, Pressure Sensitive (PSA)
- Backing: Acrylic / Acrylate, PET / Polyester, Plastic / Polymer
-
Supplier: Redwood Plastics
Description: Redco™ LDPE is defined by a density range of 0.910 – 0.940 g/cc. This results in a lower tensile strength and increased ductility. Redco™ LDPE is used for both rigid containers and plastic film applications such as plastic bags and film wrap. Redco™ Polyethylenes are
- Industry: Building / Construction, General Industrial, Marine
- Form / Shape: Extruded Profile, Film / Sheet
- Chemical System: Polyethylene (PE)
- Features: Thermoplastic
-
Supplier: Shenzhen You-San Technology Co., Ltd.
Description: PI film, also known as polyimide film, is made of pyromellitic dianhydride and diaminodiphenyl ether condensed into a film in a strong polar solvent, and then imidized. It has excellent heat resistance, high tensile strength, good chemical stability, good
- Thickness: 0.004921259842519685 inches
- Features: Anti-static / ESD Control, Dielectric / Insulating, Electrically Conductive
- Backing: Plastic / Polymer, Polyimide (e.g., Kapton®)
-
Supplier: Redwood Plastics
Description: Redco™ LDPE is defined by a density range of 0.910 – 0.940 g/cc. This results in a lower tensile strength and increased ductility. Redco™ LDPE is used for both rigid containers and plastic film applications such as plastic bags and film wrap. Redco™ Polyethylenes are
- Industry: Building / Construction, General Industrial, Marine
- Form / Shape: Extruded Profile, Film / Sheet
- Chemical System: Polyethylene (PE)
- Features: Thermoplastic
-
Supplier: Redwood Plastics
Description: Redco™ LDPE is defined by a density range of 0.910 – 0.940 g/cc. This results in a lower tensile strength and increased ductility. Redco™ LDPE is used for both rigid containers and plastic film applications such as plastic bags and film wrap. Redco™ Polyethylenes are
- Tensile Strength (Break): 4,800 to 6,200 psi
- Tensile Modulus: 100 to 150 ksi
- Elongation: 350 to 400 %
- Use Temperature: 180 F
-
Supplier: DeWAL
Description: DW 502 is a skived, tensilized PTFE (Polytetrafluoroethylene) film held to close tolerance on width and thickness. DW 502 conforms to Mil-P-22241B. The tensilizing process yields a film with greatly enhanced tensile and dielectric strength. APPLICATION INFORMATION DW 502
- Width: 0.25 to 20 inches
- Thickness: 0.002 to 0.005 inches
- Temperature Resistance: 260 C
- Dielectric Strength: 157,480,314.96063 V/m
-
Supplier: U.S. Plastic Corporation
Description: hydrocarbons and alcohols. The forming temp is 310F - 325F and the service temp is 33F - 212F. It is corrosion resistant, lightweight, high tensile strength, dielectric, non-combustible, and low flow resistance. It is not UV stabilized. Sheets larger then 38" x 48" must ship
- Form / Shape: Film / Sheet
- Chemical System: Polyvinyl Chloride (PVC)
- Features: Thermoplastic
-
Supplier: U.S. Plastic Corporation
Description: hydrocarbons and alcohols. The forming temp is 310F - 325F and the service temp is 33F - 212F. It is corrosion resistant, lightweight, high tensile strength, dielectric, non-combustible, and low flow resistance. It is not UV stabilized. Tolerance +/- .125" per side. Sheets
- Form / Shape: Film / Sheet
- Chemical System: Polyvinyl Chloride (PVC)
- Features: Thermoplastic
-
Supplier: ASTM International
Description: D638 is the recommended specimen when limited amounts of material are available. 1.2 This test method covers the determination of the comparative tensile strength and elongation properties of plastics in the form of standard microtensile test specimens when tested under defined
-
Supplier: Saint-Gobain Tape Solutions
Description: PTFE films Heat sealable bonding layers High tensile strength and high elongation Uniform tensile properties in both machine and transverse directions Isotropic shrinkage as a function of temperature Low dielectric constant and high dielectric
- Overall Thickness: 0.0005 to 0.005 inch
- Overall Width: 0.1 to 3 inch
- Tensile Strength (Break): 4,300 psi
- Tensile Modulus: 60 ksi
-
Supplier: Custom Fabricating & Supplies
Description: This tape is manufactured from a PVC film backing with a rubber based adhesive. Highest temperature performance of PVC tapes. Provides a more watertight seal than most other PVC options. Product Features Temperature Rating: 300° F / 149° C Solvent resistant High temperature perfomance
- Width: 0.25 to 2 inches
- Peel Strength / Adhesion: 1.625 lbs/in
- Temperature Resistance: -17.77777777777778 to 148.88888888888889 C
- Materials of Construction: PVC / Vinyl, Plastic / Polymer
-
Description: A 2 mil clear polyester (PET) film with silicone on one side. The product offers high tensile and tear strength with high temperature and solvent resistance. A 2 mil clear polyester (PET) film with silicone on one side. The product offers high
- Thickness: 0.0508 mm
- Liner Type: Film, Silicone-Coated
-
Supplier: ICO RALLY
Description: TT1 tape is produced using a skived Teflon film. Applications include packaging equipment, heat sealing applications, graphics arts, electrical insulation, and multi-purpose industrial uses. TT2 tape is a stretchier version, with higher tensile strength. Characteristics include
- Thickness: 0.006 inches
- Peel Strength / Adhesion: 1.875 lbs/in
- Temperature Resistance: -73 to 260 C
- Features: Abrasion / Scratch Resistant, Adhesive Tape, Dielectric / Insulating, Electronics (PCB, Semiconductor) Tape, Industrial Tape, Other, Packaging Tape, Single-Sided Adhesive, Specialty / Other, Specialty Tape, Thermally Insulating / Insulative
-
Supplier: AGC Chemicals Americas, Inc.
Description: and building architecture. The film has a thermal melting point of 260 °C and a linear thermal expansion coefficient of 9.4. High tensile elongation (200 – 510) and tear strength mean that Fluon® ETFE fluoropolymer film will not easily rip or scratch over time.
- Overall Thickness: 0.0004724412 to 0.009842525 inch
- Overall Width / O.D.: 47.24412 to 62.99216 inch
- Overall Length: 1,968.505 to 39,370.1 inch
- Tensile Strength (Break): 5,656.436734930683 psi
Find Suppliers by Category Top
Featured Products Top
-
• Good heat & impact performance • High tensile strength while remaining flexible • Excellent chemical resistance (read more)
Browse Plastic Sheet and Plastic Film Datasheets for Oak-Trees, Inc. -
• Good heat & impact performance • High tensile strength while remaining flexible • Excellent chemical resistance (read more)
Browse Plastic Sheet and Plastic Film Datasheets for Oak-Trees, Inc. -
• Good heat & impact performance • High tensile strength while remaining flexible • Excellent chemical resistance Anchor coating? 5.0±2.0μm Color Layer ? 1.5±0.5μm Polyester tape ? 16.0±1.6μm (read more)
Browse Plastic Sheet and Plastic Film Datasheets for Oak-Trees, Inc. -
• Good heat & impact performance • High tensile strength while remaining flexible • Excellent chemical resistance Anchor coating? 2.0±1.0μm Color Layer ? 1.0±0.5μm Polyester tape ? 9.0±0.9μm (read more)
Browse Plastic Sheet and Plastic Film Datasheets for Oak-Trees, Inc. -
High-tensile fasteners: the backbone of modern engineering High-tensile fasteners are specialized components designed to withstand extreme stress without deforming or failing. These fasteners are graded based on their tensile strength, which measures (read more)
Browse Nuts Datasheets for BUMAX® -
What are high-tensile fasteners? High-tensile fasteners are specialized components designed to withstand extreme stress without deforming or failing. These fasteners are graded based on their tensile strength, which measures their ability to resist breaking under tension. One of the key (read more)
Browse Bolts Datasheets for BUMAX® -
is a multiphase super alloy that was developed in the 1960's during the “Space Race”. MP35N needs to be work hardened along with aging at 1200 ? F (650 ? C) for 4 hours to achieve its highest tensile strength properties which can be as high as 300 Ksi (2070 MPa). Its high strength (read more)
Browse Torsion Springs Datasheets for Coiling Technologies, Inc. -
TPX® Film Opulent™ is a high performance heat resistant release film used for a wide range of applications including flex circuits. Opulent™ Release film's unique combination of properties and characteristics delivers high temperature performance, mechanical strength, and (read more)
Browse Release Liners Datasheets for Mitsui Chemicals America, Inc. -
Exceed™ Flow+ enables converters to easily fabricate exceptionally tough films with very high dart impact and puncture resistance, and tensile strength at break for high-integrity greenhouse and walk-in tunnel covers. The films also exhibit excellent aging performance for long lasting, durable solutions. These tough films can withstand the rigors of installation and harsh, extreme weather. (read more)
Browse Polymers and Plastic Resins Datasheets for ExxonMobil - Polyethylene Products -
The Cerium Oxide Lapping Film is coated with precisely micro or nanometer graded cerium oxide powder with good morphology. It has the advantages of high polishing efficiency to prepare a good surface condition. 2. Excellent Tensile Properties (read more)
Browse Abrasive Rolls and Abrasive Sheets Datasheets for Beijing Grish Hitech Co., Ltd.
Conduct Research Top
-
Pneumatic Motor - The Ideal Drive for Winding Processes
threads with low elasticity and high durability against tearing. Every material to be wound places different requirements on the winding drive due to their specific features in terms of surface, hardness, tensile strength, cross-section profile or thickness. Reams of paper with a. roll diameter
More Information Top
Indicates content that may require registration and/or purchase.
-
A conducting composite of polypyrrole with ultrahigh molecular weight polyethylene foam
The com- pression molding of these foams produced high tensile strength films where the elasticity is kept to a certain extent.
-
Electroactive Polymers for Robotic Applications
The method presented leads to very conductive and high tensile strength films and requires only readily available solvents, salts, and monomers.
-
Microgel formation and thermo‐mechanical properties of UV‐curing unsaturated polyester acrylates
Replacing higher amounts of ADA with MA produced higher tensile strength films possibly due to the increase in the ri- gidity of the main polyester chain.
-
FPA's Top Packaging Awards: Less Material, Better Packages
The pre-made bag employs patented materials and methods that allow the film to maintain high tensile film strength across unsupported areas while shrinking at optimum temperatures.
-
Effect of nanosized calcium carbonate on the mechanical properties of latex films
…latex films further increases the mechanical properties because the inter- actions between the curatives, filler, and rubber parti- cles are increased, as evident from the apparent swell- ing index results, thus conferring to aged films higher tensile strength than that of unaged…
-
Studies on the γ‐irradiation of natural rubber latex
The present results show that in our experiments, the irradiation of latex, even in air, did not produce these changes in rubber, and gave the film higher tensile strength (i.e., ca. 180kg./cm.2).
-
NPG Asia Materials - Composite materials: Rivaling nature
The structure gives the films high tensile strength , which can be controlled by varying the ratio of chitosan to LDH.
-
Preparation and properties of UV‐autocurable BTDA‐based polyurethane methacrylates
The addition of difunctional monomers gives the films high tensile strength , Young’s modulus, and Tgas compared to neat oligomer, but the addition of monofunc- .
-
Treatments of protein for biopolymer production in view of processability and physical properties: A review
The tensile testing results showed that protein biopoly- mer films prepared with pH values higher than the isoelectric pH region had significantly higher tensile strength than films processed under acidic conditions.
-
Effects of Microcrystalline Cellulose on Functional Properties of Hydroxy Propyl Methyl Cellulose Microcomposite Films
The highest tensile strength of films was achieved in films with 1 part 0.5 µm MCC fillers to 3 parts HPMC (highest concentration and smallest MCC size).