Products & Services
See also: Categories | Featured Products | Technical Articles | More Information-
Supplier: Haida International Equipment Co., Ltd.
Description: Product description: Melt Flow Index Tester is used to test the flowability of thermoplastic polymer under high temperature, such as polyethylene, polypropylene, pom, ABS resin, polycarbonate, nylon fluorine and other plastic polymers. The automatic temperature control methods of
- Display & Special Features: Computer Interface / Networkable, Digital Readout, Graphic / Video Display, Laboratory / Batch
- Property Analyzed: Melt Flow Index (MFI, MFR, MVR)
- Test Media / Material: Polymers (Plastics, Elastomers)
-
Supplier: Accuris
Description: PLASTIC MOULDING MATERIALS; ACRYLONITRILE/BUTADI ENE/STYRENE (ABS) MOULDING MATERIALS; PREPARATION OF SPECIMENS AND DETERMINATION OF THEIR PROPERTIES
-
Supplier: Plasco Inc.
Description: -464-1100 (FAX) MATERIAL: P-T-100N GENERIC: ABS NAT. ASTM TEST METHODS VALUE SPECIFIC GRAVITY: D-792 g/cm3 1.04 WATER ABSORPTION: D-570 24hrs
- Chemical / Polymer System Type: ABS
- Filler Material: Unfilled
- Material Type / Grade: Thermoplastic
- Tensile Modulus: 340 ksi
-
-
Supplier: Plasco Inc.
Description: -464-1100 (FAX) MATERIAL: P-T-100B GENERIC: ABS BK. ASTM TEST METHODS VALUE SPECIFIC GRAVITY: D-792 g/cm3 1.04 WATER ABSORPTION: D-570 24hrs
- Chemical / Polymer System Type: ABS
- Filler Material: Unfilled
- Material Type / Grade: Thermoplastic
- Tensile Modulus: 340 ksi
-
Supplier: Plasco Inc.
Description: -464-1100 (FAX) MATERIAL: P-T3000DB GENERIC: ABS BK. ASTM TEST METHODS VALUE SPECIFIC GRAVITY: D-792 g/cm3 1.03 WATER ABSORPTION: D-570 24hrs
- Chemical / Polymer System Type: ABS
- Elongation: 30 %
- Filler Material: Unfilled
- Material Type / Grade: Thermoplastic
-
Supplier: Plasco Inc.
Description: -464-1100 (FAX) MATERIAL: P-T3000DN GENERIC: ABS NAT. ASTM TEST METHODS VALUE SPECIFIC GRAVITY: D-792 g/cm3 1.03 WATER ABSORPTION: D-570 24hrs
- Chemical / Polymer System Type: ABS
- Elongation: 30 %
- Filler Material: Unfilled
- Material Type / Grade: Thermoplastic
-
Supplier: Plastic Ingenuity, Inc.
Description: FROM CONCEPT TO CUSTOMER PLASTIC SHEET EXTRUSION quality never takes a break. Efficient production depends on material availability. Plastic Ingenuity's in-house extrusion provides complete flexibility and control of scheduling, manufacturing, and quick turn-arounds to meet
- Applications: Sheet
- Materials: ABS, Polyethylene (PE, HDPE), PETG, Polypropylene (PP), Polystyrene
- Processes: Co-Extrusion, Hot Extrusion
- Regional Preference: North America, United States Only, Southern US Only, Midwest US Only, Other
-
Supplier: ASTM International
Description: 1.1 This specification covers acrylonitrile-butadi ene-styrene (ABS) pipe produced by single extrusion in standard thermoplastic pipe dimension ratios and pressure rated for water (see Appendix X1). Included are criteria for classifying ABS plastic pipe materials and
-
Description: 1.1 ISO 2580-1:2002 establishes a system of designation for acrylonitrile-butadi ene-styrene (ABS) moulding and extrusion materials, which may be used as the basis for specifications. 1.2 The types of ABS plastic are differentiated from each other by a classification
-
Supplier: ASTM International
Description: This specification covers acrylonitrile-butadi ene-styrene (ABS) plastic pipe produced by single extrusion or simultaneous multiple coextrusion, in Schedule 40 and 80 sizes and pressure-rated for water. Included are criteria for classifying ABS plastic pipe
-
Supplier: ASTM International
Description: , reclaimed, or recycled materials. ABS rework, generated in-house by the original plastic manufacturer, may be used by that original manufacturer, provided the ABS product shipped meets the physical and mechanical properties required by its callout in of this
-
Supplier: ASTM International
Description: , reclaimed, or recycled materials. ABS rework, generated in-house by the original plastic manufacturer, may be used by that original manufacturer, provided the ABS product shipped meets the physical and mechanical properties required by its callout in Table 1 of
-
Supplier: Haida International Equipment Co., Ltd.
Description: engineering plastics, and it also applies to plastic measurement of melt lower temperature, such as polyethylene, polystyrene, polypropylene, ABS resin, poly formaldehyde resin. At the same time, it is widely used in plastics raw materials products, the petrochemical industry
- Display & Special Features: Digital Readout, Laboratory / Batch
- Property Analyzed: Melt Flow Index (MFI, MFR, MVR)
- Test Media / Material: Polymers (Plastics, Elastomers)
-
Supplier: Haida International Equipment Co., Ltd.
Description: ). 2. High quality,melt indexer Product introduction PP and PE Melt Flow testing machine is used to test the flowability of thermoplastic polymer under high temperature, such as polyethylene, polypropylene, pom, ABS resin, polycarbonate, nylon fluorine and other plastic
- Display & Special Features: Computer Interface / Networkable, Digital Readout, Graphic / Video Display, Laboratory / Batch
- Property Analyzed: Melt Flow Index (MFI, MFR, MVR)
- Test Media / Material: Polymers (Plastics, Elastomers)
-
Description: Suitable for stress-sensitive materials, PC/PVC/PMMA/ABS strong bonding. Mainly used for polycarbonate bonding, and will not produce stress cracking under typical compression stress. Under sufficient intensity of UV or visible light, it can be cured quickly to form a flexible and
- Elongation: 260 %
- Industry: Medical / Food (Sanitary / FDA)
- Substrate / Material Compatibility: Ceramic / Glass, Metal, Plastic
- Use Temperature: -67 to 302 F
-
Supplier: RS Components, Ltd.
Description: ABS is a strong and rigid thermoplastic. High impact strength and excellent thermal forming properties. Max Long Term Service Temperature 150°C. Resistant to many acids/alkalis of medium concentration and is a good electrical insulator. White in colour Colour = White Length = 1
- Chemical / Polymer System Type: ABS
- Overall Thickness: 0.0591 inch
- Overall Width: 24.02 inch
- Tensile Strength (Break): 7252 psi
-
Supplier: RS Components, Ltd.
Description: ABS is a strong and rigid thermoplastic. High impact strength and excellent thermal forming properties. Max Long Term Service Temperature 150°C. Resistant to many acids/alkalis of medium concentration and is a good electrical insulator. White in colour Colour = White Length = 1
- Chemical / Polymer System Type: ABS
- Overall Thickness: 0.1772 inch
- Overall Width: 24.02 inch
- Tensile Strength (Break): 7252 psi
-
Supplier: RS Components, Ltd.
Description: ABS is a strong and rigid thermoplastic. High impact strength and excellent thermal forming properties. Max Long Term Service Temperature 150°C. Resistant to many acids/alkalis of medium concentration and is a good electrical insulator. White in colour Colour = White Length = 1
- Chemical / Polymer System Type: ABS
- Overall Thickness: 0.1181 inch
- Overall Width: 24.02 inch
- Tensile Strength (Break): 7252 psi
-
Supplier: RS Components, Ltd.
Description: ABS is a strong and rigid thermoplastic. High impact strength and excellent thermal forming properties. Max Long Term Service Temperature 150°C. Resistant to many acids/alkalis of medium concentration and is a good electrical insulator. White in colour Colour = White Length = 1
- Chemical / Polymer System Type: ABS
- Overall Thickness: 0.2362 inch
- Overall Width: 24.02 inch
- Tensile Strength (Break): 7252 psi
-
Supplier: Imao-Fixtureworks
Description: A slightly tapered tapped hole in the knobs provides positive lock. If an adhesive agent is applied, it should be adaptive to the ABS plastic. Use in hot or highly humid circumstances can deteriorate the plastic material properties.
- Diameter / Width: 0.7874 to 1.97 inches
- Features: Choice of Colors and/or Finishes
- Height: 0.7480 to 1.89 inches
- Knob Material: Plastic
-
Supplier: CSA Group
Description: ISO 19062-1:2015 establishes a system of designation for acrylonitrile-butadi ene-styrene (ABS) moulding and extrusion materials, which may be used as the basis for specifications. The types of ABS plastic are differentiated from each other by a classification system
-
Supplier: LG Chemical of America Inc.
Description: MBS Methacrylate Butadiene Styrene A modifying agent for improving plastic properties MBS is one of the modifying agents used to improve the plastic properties. It is added in the manufacturing process of hard and semi-hard PVC and engineering plastics to enhance impact
- Applications: Plastics / Composites
- Function: Foaming / Blowing Agent, Impact Modifier / Toughening Agent, Hardness / Strengthening Agent
-
Supplier: Shenzhen You-San Technology Co., Ltd.
Description: Introduction: PE electrostatic film is a functional film made of PE as the main material with the addition of electrostatic additives. It is soft and easy to apply, peel without residual adhesive and has excellent exhaust properties. Application: Surface protection for PMMA, PC,
- Chemical / Polymer System Type: Polyethylene (PE)
- Industry: Electronics
- Thermoplastic: Yes
-
Supplier: Ruco USA, Inc.
Description: the respective print jobs. Any acrylic acid ester resistant squeegee material may be used. Curing Conditions The varying UV absorption of the individual colors results in a range of curing properties depending on color and opacity. All colors of the 945 UV series can be cured by the
- Substrate / Surface: Plastic
-
Supplier: Ruco USA, Inc.
Description: the respective print jobs. Any acrylic acid ester resistant squeegee material may be used. Curing Conditions The varying UV absorption of the individual colors results in a range of curing properties depending on color and opacity. All colors of the 945 UV series can be cured by the
- Substrate / Surface: Plastic
-
Supplier: Ruco USA, Inc.
Description: the respective print jobs. Any acrylic acid ester resistant squeegee material may be used. Curing Conditions The varying UV absorption of the individual colors results in a range of curing properties depending on color and opacity. All colors of the 945 UV series can be cured by the
- Substrate / Surface: Plastic
-
Supplier: Ruco USA, Inc.
Description: the respective print jobs. Any acrylic acid ester resistant squeegee material may be used. Curing Conditions The varying UV absorption of the individual colors results in a range of curing properties depending on color and opacity. All colors of the 945 UV series can be cured by the
- Substrate / Surface: Plastic
-
Supplier: MCG - Performance Polymers Division
Description: TEFABLOC™ incorporates several technologies including TPE-S, TPO, TPE-E, as well as the newly developed non-food bio based TPU. Its many possible properties can also be boosted in process by reactor or dynamic cross-linking. A well-matched combination of features will satisfy even your
- Compound Type: Extrusion Grade Resin, Molding Resin
- Features: Flame Retardant (e.g. UL 94 Rated)
- Industry: Automotive, Electronics, Electric Power, Medical / Food (FDA)
- Material Type / Grade: Thermoplastic
-
Supplier: Cir-Q-Tek
Description: meeting requirements for aesthetic, mechanical, thermal, and optical properties. Listed below are a few materials we use to manufacture various products. There are many more available. Valox SE0420 Rynite 530 Ryton Ultem Vectra
- Location: North America, Europe Only
- Molding Type: Blow Molding, Gas Injection Molding (GIM), Injection Blow Molding, Reaction Injection Molding (RIM), Thermoplastic Injection Molding, Thermoset Injection Molding
- Services Offered: Clean Room Molding, Insert Molding / Overmolding, Large Part Molding, Two-shot Injection Molding, Prototype / Market Entry Molding, Low Volume Production (Short Runs), High Volume Production (Long Runs), Assembly Services, Tool / Mold Making, Design Assistance, Hot Stamping Services, Just-In-Time
-
Supplier: Waterloo Healthcare
Description: : • Antimicrobial properties built-in to protect portions of the product. • Ball bearing slides with quick release. • Dual push handles. • ABS plastic molded top. • 5” Premium easy roll casters (1) full swivel, (2) swivel w/brake, (1) swivel w
- Features: Brake
- Length: 24.5 inch
- Material: Steel
- Type: Other
-
Supplier: Waterloo Healthcare
Description: : • Antimicrobial properties built-in to protect portions of the product. • Ball bearing slides with quick release. • Dual push handles. • ABS plastic molded top. • 5” Premium easy roll casters (1) full swivel, (2) swivel w/brake, (1) swivel w
- Features: Brake
- Length: 24.5 inch
- Material: Steel
- Type: Other
-
Supplier: Waterloo Healthcare
Description: properties built-in to protect portions of the product. • Ball bearing slides with quick release. • Dual push handles. • ABS plastic molded top. • 5” Premium easy roll casters (1) full swivel, (2) swivel w/brake, (1) swivel w/ tracking
- Features: Brake
- Length: 24.5 inch
- Material: Steel
- Type: Other
-
Supplier: Waterloo Healthcare
Description: -in to protect portions of the product. • Ball bearing slides with quick release. • Dual push handles. • ABS plastic molded top. • 5” Premium easy roll casters (1) full swivel, (2) swivel w/brake, (1) swivel w/ tracking
- Features: Brake
- Length: 24.5 inch
- Material: Steel
- Type: Other
-
Supplier: Polymer Technologies Inc.
Description: properties to ensure that the full array of alternatives are considered and that the most appropriate material is ultimately selected. Plastic Injection Molding Services Our expertise and assistance continues throughout the plastic injection molding process. From mold
- Location: North America, United States Only, Northeast US Only
- Molding Type: Thermoplastic Injection Molding, Thermoset Injection Molding
- Services Offered: Insert Molding / Overmolding, Large Part Molding, Micro Molding, Low Volume Production (Short Runs), High Volume Production (Long Runs), Assembly Services, Tool / Mold Making, Design Assistance, Just-In-Time Capability, Machining
-
Supplier: International Plastics LLC
Description: .) using engineering grade materials, from ABS, Delrin, and Lexan to Torlon and PEEK, and everything in between. Utilizing our proprietary process development program, Advanced Scientific Injection Molding (ASIM), we develop an extremely stable and repeatable process for your product.
- Location: North America, United States Only, Midwest US Only
- Molding Type: Film Insert Molding (FIM), Thermoplastic Injection Molding, Thermoset Injection Molding
- Services Offered: Insert Molding / Overmolding, Micro Molding, Reel to Reel Molding, Prototype / Market Entry Molding, Low Volume Production (Short Runs), High Volume Production (Long Runs), Assembly Services, Tool / Mold Making, Bonding, Design Assistance, Just-In-Time Capability, Packaging / Shipping
Find Suppliers by Category Top
Featured Products Top
-
Division approached the Pyrogenics Group to collaborate towards creating a new coating material to support the V-22 Osprey revolutionary new tiltrotor aircraft. The V-22 is a fixed-wing plane with rotors that tilt so the aircraft can take off and land like a helicopter. The military sees it (read more)
Browse Carbon, Graphite, and Diamond Materials Datasheets for MINTEQ® International Inc, Pyrogenics Group -
• Corrosion resistant sheet materials Port routinely brings leading edge technology to customers in the form of new enhanced-performance materials that offer improvements in: • Static control and electrical properties • Strength and stability at temperature (read more)
Browse Fabricated Plastic Parts and Semi-Finished Shapes Datasheets for Port Plastics, Inc. -
NewAge Industries stocks fluoropolymer tubing in PTFE, FEP, and PFA formulations. Features include: Chemically inert; low permeability Lowest coefficient of friction of any solid material Excellent electrical and weathering properties; non (read more)
Browse Plastic Tubing Datasheets for NewAge Industries -
Best for Your Application? Wondering if your custom tubing should be lined with FEP or PTFE? While both materials have great chemical compatibility, other properties should be (read more)
Browse Plastic Tubing Datasheets for New England Tubing Technologies -
able to handle extreme force, go with polyurethane. It’s ideal for conveyor systems, wire harness fixtures, and bottling lines. ABS ABS is another durable plastic selection, ideal for material handling and conveying. It is impact resistant and built to last. It has (read more)
Browse Plastic Sheet and Plastic Film Datasheets for Laird Plastics, Inc. -
• Transparent sheet products • Corrosion resistant sheet materials Port routinely brings leading edge technology to customers in the form of new enhanced-performance materials that offer improvements in: • Static control and electrical properties • Strength and (read more)
Browse Plastic Sheet and Plastic Film Datasheets for Port Plastics, Inc. -
A ONE-STOP SHOP FOR TURNING POLYURETHANE MATERIALS INTO A FINAL PRODUCT When design engineers work with General Plastics, we often (read more)
Browse Fabricated Plastic Parts and Semi-Finished Shapes Datasheets for General Plastics Manufacturing Co. -
Hyper Core ABS CF15 Carbon fiber-reinforced material with balanced properties and wide range of uses The Hyper Core filament line is defined as a next-generation series of (read more)
Browse 3D Printing and Additive Manufacturing Materials Datasheets for Raise3D Technologies, Inc. -
This high performing melt processable PAI material has several key material properties such as the highest tensile and compression strength of the compression molded grades, coupled with a very low CLTE. This Torlon plastic also maintains strength and stiffness at elevated temperatures. (read more)
Browse Plastic Plate, Rod, and Stock Shapes Datasheets for Ensinger, Inc. -
, but with characteristics similar to expensive engineered thermoplastics. Some of the material’s incredible physical properties include: High tensile strength High impact strength Moderate flexural properties High (read more)
Browse Plastic Molding Services Datasheets for Osborne Industries, Inc.
Conduct Research Top
-
The Ultimate Tapping Screw for Plastics
, etc. Sometimes it appears as though they're all overlapping versions of the same technology. The plastic industry continues to develop dynamic alloys and new applications; fasteners have maintained pace. By definition the materials we are concerned with are called thermoplastics, all of which
More Information Top
-
Shock & Vibration, Aircraft/Aerospace, and Energy Harvesting, Volume 9
The test article was modeled using solid quadratic elements and simplifying the material to an isotropic, homogeneous material with ABS plastic material properties .
-
http://krex.k-state.edu/dspace/bitstream/handle/2097/8702/ArkaChattopadhyay2011.pdf?sequence=1
Material properties of ABS plastic were used for the tube material, having a Young’s Modulus of 236000 psi and Poisson’s ratio of 0.39.
-
A biomechanical study of osteoporotic vertebral trabecular bone: The use of micro-CT and high-resolution finite element analysis
Material properties of ABS plastic specimens were obtained by tensile and compression tests with an INSTRON test machine (Table 3).
-
Multidisciplinary Analysis Optimization Conferences > Conceptual Design of Compliant Mechanisms for Flapping Wings with Topology Optimization
The �������� quantities in the mechanism are allowed to vary during the optimization process, and correspond to the material properties for ABS plastic .
-
https://uwspace.uwaterloo.ca/bitstream/handle/10012/7300/Mann_James.pdf?sequence=1
The continuous joint device elastic modulus, coefficient of thermal expansion and density were assumed based on general material properties for ABS plastics found on an online material database (Anon., n.d.).
-
Towards a novel safety norm for domestic robotics
Two points are numerically evaluated: α1 has material properties of ABS plastic (Γ1 = 3e9 N/m2 ) and its shape is defined by r1 = 0.01 m, α2 has oak wood material (Γ1 = 13e9 N/m2 ) with r2 = 0.03 m. Fig. 5 clearly shows …
-
Rapid Manufacturing with FDM in Jig and Fixture Construction
This, however, is only possible within the framework of the material properties of the ABS plastic .
-
http://dspace.mit.edu/bitstream/handle/1721.1/38195/46972704-MIT.pdf?sequence=2
parts which would eventually be injection molded in structural foam had to be machined out ofDelrin or ABS plastic (which had similar material properties ).
-
A novel universal joint with PZT-driven cyclic symmetric stator
ABS plastic is assumed and its material prop- erties are applied homogeneously in the cyclic symmetric stator finite element model.
-
ZASMHBA0002449
The models were fabricated using acrylonitrile-butadiene-styrene ( ABS ) plastic , a material that has properties similar to the polycar- .