Regulators Hydraulic Valves
Description
Regulators in hydraulic systems are designed to control the pressure within the system. They function by opening and bypassing fluid when the pressure exceeds a set threshold, and then closing when the pressure falls back to acceptable levels. This action helps maintain a stable pressure environment within the hydraulic circuit, ensuring that the system operates efficiently and safely.
Working Principle
Hydraulic pressure regulators operate as a type of pressure relief valve. They utilize a spring mechanism to control the opening and closing of the valve. When the pressure in the system exceeds the set point, the valve opens to allow fluid to bypass, reducing the pressure. Once the pressure drops below the set point, the spring mechanism closes the valve, stopping the bypass. This self-regulating mechanism is crucial for preventing system overloads and maintaining consistent pressure levels, which is essential for the efficient operation of hydraulic systems.
Applications
Hydraulic regulators are used in various applications, including land-based and underwater systems. They are integral in systems where precise pressure control is necessary, such as in hydraulic pump circuits that require fluid bypassing during idle times or specific cycle phases. These regulators are also used in high-pressure gas storage systems to reduce and regulate pressure for safe distribution.
Advantages over other Hydraulic Valves
One of the primary advantages of hydraulic regulators over other types of valves is their ability to maintain a tight seal even as pressure fluctuates. This capability is particularly beneficial in high-purity systems where pressure demands can vary significantly. Additionally, hydraulic regulators can fully open and close, ensuring that downstream components are not exposed to pressures exceeding the regulator's set point, which enhances system safety and reliability.
Limitations
Hydraulic regulators are not suitable for applications involving extreme service conditions, such as excessive vibration or cavitation, where control valves with specialized trim designs are more appropriate. Regulators may not handle wide variations or extreme pressure spikes as effectively as control valves, which can lead to potential damage in such environments.
Considerations
When selecting hydraulic regulators, several factors should be considered. Initial costs can vary depending on the material and design, with options like steel, coated steel, or stainless steel available. Operating expenses are generally low, as these regulators are designed to minimize fluid bypass and energy loss. Durability is a key advantage, with many regulators capable of maintaining performance over long periods. However, accuracy can be affected by extreme conditions, and regular maintenance is necessary to ensure optimal performance. Replacement and maintenance costs should be factored into the overall cost of ownership, as these can vary based on the specific application and operating environment.
from Rotork plc
Rotork Fairchild High Pressure Hydraulic - Pressure Reducing Regulator is suitable for 10,000 psig / 690 bar inlet and outlet hydraulic and pneumatic applications. Tapped exhaust port allows for convenient capture of vented media. Age hardened stainless steel allow seat (MP35N) provides a unique... [See More]
- Valve Type: Hydraulic; Regulator
- Actuation: Pneumatic
- Maximum Pressure: 10000.00
from Radwell International
DISCONTINUED BY MANUFACTURER, PRESSURE REGULATOR, HYDRAULIC, W/ PISTON, 50-250 BAR, 3/8 INCH BSP, HARDENED STEEL. FREE 2 YEAR RADWELL WARRANTY [See More]
- Valve Type: Hydraulic; Regulator
from Radwell International
DISCONTINUED BY MANUFACTURER, HYDRAULIC PRESSURE REGULATOR, STANDARD OPERATION, THREADED BONNET, KNOB ADJUSTMENT, BUNA "N" DIAPHRAGM, METAL-TO-METAL SEATING, 0-60 PSI (0-414KPA). FREE 2 YEAR RADWELL WARRANTY [See More]
- Valve Type: Diaphragm; Hydraulic; Regulator
from Radwell International
DISCONTINUED BY MANUFACTURER, HYDRAULIC PRESSURE REGULATOR, 315 BAR, .13 I, RED/GREEN INDICATOR. FREE 2 YEAR RADWELL WARRANTY [See More]
- Valve Type: Hydraulic; Regulator
from Radwell International
DISCONTINUED BY MANUFACTURER, FLOW REGULATOR, HYDRAULIC, SINGLE STAGE AND TWO STAGE DIRECTIONAL VALVES . FREE 2 YEAR RADWELL WARRANTY [See More]
- Valve Type: Hydraulic; Regulator
from Radwell International
DISCONTINUED BY MANUFACTURER, FLOW REGULATOR, HYDRAULIC, SINGLE STAGE AND TWO STAGE DIRECTIONAL VALVES. FREE 2 YEAR RADWELL WARRANTY [See More]
- Valve Type: Hydraulic; Regulator
from Radwell International
DISCONTINUED BY MANUFACTURER, VALVE, HYDRAULIC FLOW REGULATOR, THROTTLE CHECK. FREE 2 YEAR RADWELL WARRANTY [See More]
- Valve Type: Check; Hydraulic; Regulator
from Radwell International
HYDRAULIC VALVE, FLOW REGULATOR TYPE, FAR1-12-S-0, 0.375 GAL/MIN MINIMUM FLOW, 10 GAL/MIN MAXIMUM FLOW. FREE 2 YEAR RADWELL WARRANTY [See More]
- Valve Type: Hydraulic; Regulator
from Equilibar, LLC.
Equilibar introduces a new type of vacuum regulator with more than 5X the flow stability of traditional spring regulators. That means that your vacuum process can remain stable even as gas flow rate changes over wide ranges. Can be used with manual set-point adjustment or computer automation. Is... [See More]
- Valve Type: Control Valve; Hydraulic; Regulator
- Maximum Pressure: 0.00 to 14.74
- Valve Size: 0.25 to 4.00
- Number of Ports: 2
from HAWE North America Inc.
The task of pressure reducing valves in a hydraulic circuit is to maintain a rather constant outlet pressure despite a higher and changing inlet pressure. They are used when an hydraulic circuit with a higher pressure level (primary side) is to supply another circuit with a lower pressure level... [See More]
- Valve Type: Control Valve; Hydraulic; Regulator
- Maximum Pressure: 4351.13
from DME Company
Temperature Actuated Regulating Valve. • Excellent flow characteristics. • Maintain oil temperature thru heat exchanger Thermostatic COOLING CONTROL valve. • Built for the most rugged machine tool and hydraulic applications. • Six temperature ranges to meet your requirements. [See More]
- Valve Type: Hydraulic; Regulator; Regulating Valve
- Maximum Pressure: 0.00 to 150.00
- Valve Size: 0.38 to 2.50
- Number of Ports: 2
from HydraForce, Inc.
A screw-in, cartridge-style, fixed orifice, pressure compensated, hydraulic flow regulating valve (restrictive type) for operation up to 345 bar (5000 psi). [See More]
- Valve Type: Cartridge; Hydraulic; Regulator
- Number of Ports: 2
- Maximum Pressure: 5000.00
- Actuation: Electric
from Emerson Automation Solutions – TESCOM Regulators, Valves & Systems
TESCOM ™ 54-2700 Series high flow backpressure regulator is designed for up to 1000 PSIG [69 PSIG] control pressure. This regulator has a Vespel ® seat that allows for hydraulic or pneumatic service. Optional with air load for use with the TESCOM ER3000 electropneumatic controller. Ideal... [See More]
- Valve Type: Hydraulic; Regulator
- Maximum Pressure: 5500.00
- Valve Size: 1.00
- Number of Ports: 2
from Continental Hydraulics
VEP 03 MSV. 3-WAY MODULAR PROPORTIONAL PRESSURE REDUCING/RELIEVING VALVES. Mounting Surface NFPA D03 (ISO 4401-03-02-0-05). Max Pressure 4600 PSI (320 bar). Max Flow Rate 13.2 gpm (50 l/min). Description. The VEP03MSV-PDRP is a D03 modular three-way proportional pressure reducing/relieving valve... [See More]
- Valve Type: Solenoid; Spool; Hydraulic; Regulator
- Maximum Pressure: 4600.00
from Barksdale Control Products
Barksdale's pressure regulators are sensitive pressure-control devices used to maintain a pre-determined pressure in a hydraulic circuit. The regulated output pressure can be controlled either by the force of a spring, or a motor (hydraulic or pneumatic). Design features ensure excellent accuracy,... [See More]
- Valve Type: Hydraulic; Regulator
- Number of Ports: 4
- Maximum Pressure: 3000.00
- Actuation: Manual (optional feature); Pneumatic (optional feature); Hydraulic
from Eaton Hydraulics Group
Proportional Pressure Valves. Eaton ’s dependable proportional pressure valves offer superior hydraulic system solutions for a variety of machinery, processing and testing applications. Complete with on-board ramp adjustment, superior moisture resistance and valve enable for easier interlock... [See More]
- Valve Type: Hydraulic; Regulator
- Maximum Pressure: 5000.00
from co-ax valves inc.
Function: pressure balanced pressure limitation valve, externally controlled or direct acting. Media: gaseous, liquid, highly viscous, contaminated. Body Materials: brass, aluminum, stainless steel, galvanized steel. Options: SAE connection, safety valve, mounting, special voltage, coil M 12 x 1,... [See More]
- Valve Type: Control Valve; Hydraulic; Metering; Regulator; Relief; Underwater (optional feature); Coaxial Valve
- Maximum Pressure: 72.52 to 1740.45
- Valve Size: 0.59
- Number of Ports: 2
from Atos North America
DPZO-A are two stage proportional valves without position transducer, which provide both directional and non compensated flow control according to the electronic reference signal. They operate in association with electronic drivers, which supply the proportional valves with correct current signal to... [See More]
- Valve Type: Control Valve; Directional; Hydraulic; Regulator; Relief
- Maximum Pressure: 5076.32
- Valve Size: 0.39 to 1.26
- Number of Ports: 4
from Carr Lane Manufacturing Co.
Allows operating a single clamp, or group of clamps, at a lower pressure than the rest of the fixture. Can be used to finely adjust the clamping force of selected components while keeping others at full pressure. Great new design can be used on pallet fixtures disconnected from a power source, since... [See More]
- Valve Type: Hydraulic; Regulator
- Maximum Pressure: 7500.00
- Valve Size: 0.25
- Number of Ports: 2
from Equilibar, LLC.
Precision Back Pressure Regulator for Hygienic Service. For gas, liquid and mixed phase processes. Wide Range of working Pressures and Flows. Rugged 316 stainless steel Bar Stock Design with no Welded Fittings. Hygienic: No Crevices, <32Ra Finish. 3 Piece Low Dead Volume Design. Ports are the... [See More]
- Valve Type: Control Valve; Hydraulic; Regulator; Relief
- Maximum Pressure: 0.00 to 150.00
- Valve Size: 0.50
- Number of Ports: 2
from HAWE North America Inc.
Pressure limiting valve (safety valve): Safeguarding the system against excessive pressure or for the limitation of working pressure. Sequence valves: Generates a constant pressure difference between inlet and outlet of the flow. Directly controlled valves feature a dampening device to ensure quiet... [See More]
- Valve Type: Hydraulic; Regulator; Relief
- Actuation: Manual
- Maximum Pressure: 7251.89
from HydraForce, Inc.
A screw-in, cartridge-style, adjustable, pressure-compensated, restrictive-type hydraulic flow regulating valve. [See More]
- Valve Type: Cartridge; Hydraulic; Regulator
- Number of Ports: 2
- Maximum Pressure: 5000.00
- Actuation: Electric
from Emerson Automation Solutions – TESCOM Regulators, Valves & Systems
TESCOM ™ 54-2100 Series backpressure regulator is suitable for 15000 PSIG [1035 bar] liquid applications. Modification also available for 20000 PSIG [1380 bar] and 30000 PSIG [2069 bar]. Hardened stainless steel seat and stem provide excellent wear resistance in harsh applications. Ideal for... [See More]
- Valve Type: Hydraulic; Regulator
- Maximum Pressure: 15000.00
- Valve Size: 0.25 to 0.50
- Number of Ports: 2
from Continental Hydraulics
P03 MSV-PDR*. PRESSURE REDUCING / RELIEVING VALVE. Mounting Surface NFPA D03 (ISO 4401-03-02-0-05). Max Pressure 5000 PSI (350 bar). Max Flow Rate 20 gpm (75 l/min). Description. The P03MSV-PDR valve is a modular three-way spool type direct operated pressure reducing / relieving valve. It is... [See More]
- Valve Type: Cartridge; Spool; Hydraulic; Regulator
- Number of Ports: 3
- Maximum Pressure: 5000.00
from Barksdale Control Products
Barksdale's increased sensitivity regulator is a sensitive, pressure-control device used to maintain a pre-determined pressure in a hydraulic circuit. This version offers better reaction time and better set point accuracy. The regulated output pressure is controlled by manually adjusting the spring... [See More]
- Valve Type: Hydraulic; Regulator
- Number of Ports: 4
- Maximum Pressure: 5000.00
- Actuation: Manual (optional feature); Pneumatic (optional feature); Hydraulic
from co-ax valves inc.
Function: pressure balanced pressure limitation valve, externally controlled or direct acting. Media: gaseous, liquid, highly viscous, contaminated. Body Materials: brass, aluminum, stainless steel, galvanized steel. Options: SAE connection, safety valve, mounting, special voltage, coil M 12 x 1,... [See More]
- Valve Type: Control Valve; Hydraulic; Metering; Regulator; Relief; Underwater (optional feature); Coaxial Valve
- Maximum Pressure: 72.52 to 1740.45
- Valve Size: 1.26
- Number of Ports: 2
from Equilibar, LLC.
Precision Back Pressure Regulator. For gas & mixed phase processes. Rugged Bar Stock Design. Available in ¼ inch through 1 inch sizes. SS316 standard with Hastelloy C optional. Diaphragms available in PTFE, Hastelloy, SS316, and polyimide. The GS series is specifically designed for a... [See More]
- Valve Type: Control Valve; Hydraulic; Regulator; Relief
- Maximum Pressure: 0.00 to 2500.00
- Valve Size: 0.12 to 1.00
- Number of Ports: 2
from HAWE North America Inc.
The task of pressure reducing valves in a hydraulic circuit is to maintain arather constant outlet pressure despite a higher and changing inlet pressure. They are used when an hydraulic circuit with a higher pressure level(primary side) is to supply another circuit with a lower pressure... [See More]
- Valve Type: Control Valve; Hydraulic; Regulator
- Number of Ports: 2
- Maximum Pressure: 1885.49 to 7251.89
- Actuation: Manual
from HydraForce, Inc.
A screw-in, cartridge-style, multi-function valve which includes a fixed-compensated, priority-type flow regulator and an adjustable pressure relief valve in one cartridge. [See More]
- Valve Type: Cartridge; Hydraulic; Regulator
- Number of Ports: 4
- Maximum Pressure: 3000.00
- Actuation: Electric
from Emerson Automation Solutions – TESCOM Regulators, Valves & Systems
TESCOM ™ 26-2000 Series high pressure, low flow piston sensed regulator is available in dome, spring and air load versions, comes with segregated captured venting standard with inlet pressure ratings of 6000-15000 PSIG [413 -1034 bar]. Can be used with the TESCOM ER3000 electropneumatic... [See More]
- Valve Type: Hydraulic; Regulator
- Maximum Pressure: 15000.00
- Valve Size: 0.25 to 0.50
- Number of Ports: 2
from Barksdale Control Products
Barksdale's pressure regulators are sensitive, pressure-control devices used to maintain a pre-determined pressure in a hydraulic circuit. The regulated output pressure is controlled by manually adjusting the spring force to balance the hydraulic loading. Design features ensure excellent accuracy,... [See More]
- Valve Type: Hydraulic; Regulator
- Number of Ports: 4
- Maximum Pressure: 3000.00
- Actuation: Manual (optional feature); Pneumatic (optional feature); Hydraulic
from co-ax valves inc.
Function: pressure balanced pressure limitation valve, externally controlled or direct acting. Media: gaseous, liquid, highly viscous, contaminated. Body Materials: brass, aluminum, stainless steel, galvanized steel. Options: SAE connection, safety valve, mounting, special voltage, coil M 12 x 1,... [See More]
- Valve Type: Control Valve; Hydraulic; Metering; Regulator; Relief; Underwater (optional feature); Coaxial Valve
- Maximum Pressure: 14.50 to 232.06
- Valve Size: 1.26
- Number of Ports: 2
from Equilibar, LLC.
Equilibar's Research Series back pressure regulator offer precision performance for high pressure applications up to 5000 psig. These regulators provide stable inlet pressure across widely varying flow rates, for liquid, gas, and mixed phase fluids. We can provide diaphragms of Stainless Steel 316,... [See More]
- Valve Type: Control Valve; Hydraulic; Regulator; Relief
- Maximum Pressure: 0.00 to 10000.00
- Valve Size: 0.12
- Number of Ports: 2
from HydraForce, Inc.
A screw-in, cartridge-style, spring biased, pressure reducing logic element. [See More]
- Valve Type: Cartridge; Hydraulic; Regulator
- Number of Ports: 2
- Maximum Pressure: 3500.00
- Actuation: Manual
from Emerson Automation Solutions – TESCOM Regulators, Valves & Systems
TESCOM ™ 50-2200 Series pressure reducing regulator is specifically designed for extended life operation in high pressure hydraulic applications. Suitable for wellhead control panels, subsea valve actuation, chemical injection and Hydraulic Power Units (HPU). New stem and seal design extends... [See More]
- Valve Type: Hydraulic; Regulator
- Maximum Pressure: 15000.00 to 20000.00
- Valve Size: 0.25
- Number of Ports: 2
from Barksdale Control Products
Barksdale's pressure regulators are sensitive pressure-control devices used to maintain a pre-determined pressure in a hydraulic circuit. The regulated output pressure can be controlled either by the force of a spring, or a motor (hydraulic or pneumatic). Design features ensure excellent accuracy,... [See More]
- Valve Type: Hydraulic; Regulator
- Maximum Pressure: 3000.00 to 5000.00
- Valve Size: 1.00
- Number of Ports: 3
from co-ax valves inc.
Function: pressure balanced pressure limitation valve, externally controlled or direct acting. Media: gaseous, liquid, highly viscous, contaminated. Body Materials: brass, aluminum, stainless steel, galvanized steel. Options: SAE connection, safety valve, mounting, special voltage, coil M 12 x 1,... [See More]
- Valve Type: Control Valve; Hydraulic; Metering; Regulator; Relief; Underwater (optional feature); Coaxial Valve
- Maximum Pressure: 72.52 to 928.24
- Valve Size: 0.59
- Number of Ports: 2
from Equilibar, LLC.
New Beta HT Series Extends Temperature to 450C. Equilibar has just made its HT Series back pressure regulators available for beta release to select customers. These regulators utilize a graphite seal for temperatures to 450C and pressures to 5000 psig. The Grafoil GTA seal is nuclear grade purity... [See More]
- Valve Type: Control Valve; Hydraulic; Regulator; Relief
- Maximum Pressure: 0.00 to 5000.00
- Valve Size: 0.12
- Number of Ports: 2
from HydraForce, Inc.
A screw-in, cartridge-style, direct-acting, spool-type, hydraulic pressure reducing/relieving valve with internal pilot and internal spring chamber drain, designed to act as a pressure-regulating device for secondary circuits. It is intended for use in stable. input flow circuits. [See More]
- Valve Type: Cartridge; Hydraulic; Regulator
- Maximum Pressure: 3500.00
- Valve Size: 0.25 to 0.50
- Number of Ports: 2
from Emerson Automation Solutions – TESCOM Regulators, Valves & Systems
TESCOM ™ BB-1 Series high pressure, low flow, miniature pressure reducing regulator provides six outlet pressure ranges available up to 1800 PSIG [124 bar] outlet. This non-venting regulator is small and compact, weighing approximately 4 oz [113 g] in the standard aluminum construction. Also... [See More]
- Valve Type: Hydraulic; Regulator
- Maximum Pressure: 6000.00
- Valve Size: 0.25
- Number of Ports: 4
from Barksdale Control Products
Barksdale's pressure regulators are sensitive pressure-control devices used to maintain a pre-determined pressure in a hydraulic circuit. The regulated output pressure can be controlled either by the force of a spring, or a motor (hydraulic or pneumatic). Design features ensure excellent accuracy,... [See More]
- Valve Type: Hydraulic; Regulator
- Maximum Pressure: 3000.00 to 5000.00
- Valve Size: 1.00 to 1.50
- Number of Ports: 5
from co-ax valves inc.
Function: pressure balanced pressure limitation valve, externally controlled or direct acting. Media: gaseous, liquid, highly viscous, contaminated. Body Materials: brass, aluminum, stainless steel, galvanized steel. Options: SAE connection, safety valve, mounting, special voltage, coil M 12 x 1,... [See More]
- Valve Type: Control Valve; Hydraulic; Metering; Regulator; Relief; Underwater (optional feature); Coaxial Valve
- Maximum Pressure: 0.00 to 600.00
- Valve Size: 1.26
- Number of Ports: 2
from Equilibar, LLC.
Standard Pressure Range: 0.02 (.5 ” WC) to 1500 psig. Ultra Low to Zero flow performance. Standard Cv from 1E-11 to 0.01. Standard 316L Stainless Steel Body; Hastelloy C and PTFE also available. NPT, VCR/VCO type and Valco (low dead volume) ends available. Wide Variety of Diaphragms Including... [See More]
- Valve Type: Control Valve; Hydraulic; Regulator; Relief
- Maximum Pressure: 0.00 to 3000.00
- Valve Size: 0.12
- Number of Ports: 2
from HydraForce, Inc.
A screw-in, cartridge-style, direct-acting, spool-type, hydraulic pressure reducing/relieving valve, with internal pilot and internal spring-chamber drain. It is designed to act as a pressure regulating valve for secondary circuits. Internal damping makes this valve particularly suitable for use in... [See More]
- Valve Type: Cartridge; Hydraulic; Regulator
- Maximum Pressure: 3500.00
- Valve Size: 0.25 to 0.38
- Number of Ports: 2
from Emerson Automation Solutions – TESCOM Regulators, Valves & Systems
TESCOM ™ 54-2200 Series high pressure, high flow pressure reducing regulator is excellent for hydraulic applications. Inlet and outlet is rated up to 8000 PSIG [550 bar]; Cv = 2.0 for flows up to 60 GPM [127 LPM]; and spring, air and dome loaded versions are available. Hardened stainless steel... [See More]
- Valve Type: Hydraulic; Regulator
- Maximum Pressure: 8000.00
- Valve Size: 0.75
- Number of Ports: 3
from Barksdale Control Products
Barksdale's Increased Sensitivity Regulator is a modified version of the Heavy Duty regulator, designed to allow more control at low pressures. This version offers better reaction time and better set point accuracy. The regulated output pressure can be controlled either by the force of a spring, or... [See More]
- Valve Type: Hydraulic; Regulator
- Number of Ports: 4
- Maximum Pressure: 5000.00
- Actuation: Manual (optional feature); Pneumatic (optional feature); Hydraulic
from co-ax valves inc.
Function: pressure balanced pressure limitation valve, externally controlled or direct acting. Media: gaseous, liquid, highly viscous, contaminated. Body Materials: brass, aluminum, stainless steel, galvanized steel. Options: SAE connection, safety valve, mounting, special voltage, coil M 12 x 1,... [See More]
- Valve Type: Control Valve; Hydraulic; Metering; Regulator; Relief; Underwater (optional feature); Coaxial Valve
- Maximum Pressure: 145.04 to 2900.75
- Valve Size: 0.31
- Number of Ports: 2
from Equilibar, LLC.
Precision Back Pressure Regulator. For liquid, gas & mixed phase processes. SS316 Rugged Bar Stock Design. Unique Chatter Suppression Feature in liquid only applications. High Precision and sensitivity. PTFE, stainless steel, and Hastelloy diaphragms available. The NL series back pressure... [See More]
- Valve Type: Control Valve; Hydraulic; Regulator; Relief
- Maximum Pressure: 0.00 to 500.00
- Valve Size: 1.00 to 4.00
- Number of Ports: 2
from HydraForce, Inc.
A screw-in, cartridge-style, direct-acting, spool-type reducing/relieving valve designed to act as a pressure regulating device for secondary circuits. It is intended for use in stable-input fl ow circuits. [See More]
- Valve Type: Cartridge; Spool; Hydraulic; Regulator
- Number of Ports: 3
- Maximum Pressure: 0.00 to 1000.00
- Positions: 2
from Emerson Automation Solutions – TESCOM Regulators, Valves & Systems
TESCOM ™ 54-2300 Series pressure reducing hydraulic regulator offers self-venting as standard. This medium flow regulator is capable of flows from 5-50 GPM and is available in airload for use with the TESCOM ER3000 electropneumatic controller. Ideal for use in hydraulic test stands and process... [See More]
- Valve Type: Hydraulic; Regulator
- Maximum Pressure: 10000.00
- Valve Size: 0.50 to 0.75
- Number of Ports: 2
from Barksdale Control Products
Barksdale's pressure regulators are sensitive pressure-control devices used to maintain a pre-determined pressure in a hydraulic circuit. The Stainless Steel Regulators offer corrosive-resistant, 316 stainless steel, units with SAE J518-2 code 62 flanges, which are standard with this series. Code 62... [See More]
- Valve Type: Hydraulic; Regulator
- Actuation: Pilot
- Maximum Pressure: 3000.00 to 5000.00
from co-ax valves inc.
Function: pressure balanced pressure limitation valve, externally controlled or direct acting. Media: gaseous, liquid, highly viscous, contaminated. Body Materials: brass, aluminum, stainless steel, galvanized steel. Options: SAE connection, safety valve, mounting, special voltage, coil M 12 x 1,... [See More]
- Valve Type: Control Valve; Diverter; Hydraulic; Metering; Regulator; Underwater (optional feature); Coaxial Valve
- Maximum Pressure: 72.52 to 1450.38
- Valve Size: 0.59
- Number of Ports: 3