Maintained Contact Rotary Limit Switches
from Radwell International
LIMIT SWITCH OPERATING HEAD (ONLY), ROTARY, MAINTAINED, WORKS WITH RAD00593 & RAD00607 ONLY. FREE 2 YEAR RADWELL WARRANTY [See More]
- Contact Type: Mantained Contact
from DigiKey
Switch SPDT Panel Mount [See More]
- Contact Type: Mantained Contact
- Connections: Solder Terminal; Solder Lug
- Switch Configuration: Single Pole, Double Throw (SPDT); SPDT
- Maximum Current Rating: 0.1000
from Radwell International
LIMIT SWITCH OPERATING HEAD (ONLY), ROTARY, MAINTAINED, WORKS WITH RAD00732 & RAD00736 ONLY. FREE 2 YEAR RADWELL WARRANTY [See More]
- Contact Type: Mantained Contact
from DigiKey
Switch SPDT Panel Mount [See More]
- Contact Type: Mantained Contact
- Connections: Wire Leads
- Switch Configuration: Single Pole, Double Throw (SPDT); SPDT
- Maximum Current Rating: 0.1000
from Radwell International
LIMIT SWITCH OPERATING HEAD (ONLY), ROTARY, MAINTAINED, WORKS WITH RADWELL VERIFIED SUBSTITUTE PART # 9007C54C-SUB ONLY. FREE 2 YEAR RADWELL WARRANTY [See More]
- Contact Type: Mantained Contact
from DigiKey
Switch SPDT Panel Mount [See More]
- Contact Type: Mantained Contact
- Connections: "Quick Connect - 0.110"" (2.8mm)"
- Switch Configuration: Single Pole, Double Throw (SPDT); SPDT
- Maximum Current Rating: 2
from Radwell International
SUBSTITUTE FOR SCHNEIDER/TELEMECANIQUE C2BHJK09, LIMIT SWITCH, FULL PRODUCT REPLACEMENT, HEAVY DUTY SPDT ROTARY HEAD 1NO/1NC MAINTAINED. FREE 2 YEAR RADWELL WARRANTY [See More]
- Contact Type: Mantained Contact
- Switch Configuration: Single Pole, Double Throw (SPDT)
from DigiKey
Switch SPDT Through Hole [See More]
- Contact Type: Mantained Contact
- Connections: PC Pin
- Switch Configuration: Single Pole, Double Throw (SPDT); SPDT
- Maximum Current Rating: 2
from Radwell International
SUBSTITUTE FOR SCHNEIDER/TELEMECANIQUE C4BHJK09, LIMIT SWITCH, FULL PRODUCT REPLACEMENT, 2 NO/NC - ROTARY HEAD - CW+CCW - MAINTAINED. FREE 2 YEAR RADWELL WARRANTY [See More]
- Contact Type: Mantained Contact
from DigiKey
Switch SPDT Panel Mount [See More]
- Contact Type: Mantained Contact
- Connections: Solder Terminal; Solder Lug
- Switch Configuration: Single Pole, Double Throw (SPDT); SPDT
- Maximum Current Rating: 2
from Radwell International
LIMIT SWITCH HEAD, SIDE ROTARY, MAINTAINED 2 POSITION, HEIGHT: 2.46 INCH, LENGTH: 1.05 INCH, WIDTH: 1.54 INCH, IP67, SERIES E50: HEAVY DUTY PLUG IN, OPERATING TEMP: 14-201 DEGREES F. FREE 2 YEAR RADWELL WARRANTY [See More]
- Contact Type: Mantained Contact
from DigiKey
Switch DPDT Panel Mount, Snap-In [See More]
- Contact Type: Mantained Contact
- Connections: "Quick Connect - 0.187"" (4.7mm)"
- Switch Configuration: Double Pole, Double Throw (DPDT); DPDT
- Maximum Current Rating: 10
from Radwell International
LIMIT SWITCH, 802R SERIES, SEALED, 1/2 IN NPT THREAD, NON-PLUG-IN, ROTARY LEVER ARM, 1 CIRCUIT, MAINTAINED CONTACT, SNAP ACTING, NORMALLY OPEN. FREE 2 YEAR RADWELL WARRANTY [See More]
- Contact Type: Mantained Contact
from DigiKey
SWITCH SNAP ACTION 3PST 6A 125V [See More]
- Contact Type: Mantained Contact
- Switch Configuration: 3PST-2NC/1NO
- Normal State: Normally Open; Normally Closed
- Actuator Type: Standard Roller; Adjustable Roller
from Radwell International
SUBSTITUTE OF SCHNEIDER ELECTRIC 9007C54C, LIMIT SWITCH, HEAVY DUTY, SPDT ROTARY HEAD, 1NO/1NC, MAINTAINED. FREE 2 YEAR RADWELL WARRANTY [See More]
- Contact Type: Mantained Contact
- Switch Configuration: Single Pole, Double Throw (SPDT)
from DigiKey
SWITCH LIMIT DPST 6A 125V [See More]
- Contact Type: Mantained Contact
- Switch Configuration: Double Pole, Single Throw (DPST); DPST-NO/NC
- Normal State: Normally Open; Normally Closed
- Connections: Screw Terminal; Screw Terminal
from Radwell International
LIMIT SWITCH, HEAVY DUTY, SPDT ROTARY HEAD, 1NO/1NC, MAINTAINED. FREE 2 YEAR RADWELL WARRANTY [See More]
- Contact Type: Mantained Contact
- Switch Configuration: Single Pole, Double Throw (SPDT)
from DigiKey
DECTECTOR SWITCH, ON-OFF, TOP AC [See More]
- Contact Type: Mantained Contact
- Switch Configuration: Single Pole, Single Throw (SPST); SPST-NC
- Normal State: Normally Closed
- Connections: Gull Wing
from Radwell International
LIMIT SWITCH, HEAVY DUTY, 2NO/2NC, ROTARY HEAD, CW+CCW, MAINTAINED. FREE 2 YEAR RADWELL WARRANTY [See More]
- Contact Type: Mantained Contact
from DigiKey
DETECTOR SWITCH, ON-(MOM), TOP A [See More]
- Contact Type: Mantained Contact
- Switch Configuration: Single Pole, Single Throw (SPST); SPST-NC (DB)
- Normal State: Normally Closed
- Connections: Gull Wing
from Radwell International
LIMIT SWITCH - HEAVY DUTY, STANDARD BODY, SPDT, 1/2NPT, ROTARY HEAD, MAINTAINED. FREE 2 YEAR RADWELL WARRANTY [See More]
- Contact Type: Mantained Contact
- Switch Configuration: Single Pole, Double Throw (SPDT)
from DigiKey
FOOT SWITCH DPST 3A 240V [See More]
- Contact Type: Mantained Contact
- Switch Configuration: Double Pole, Single Throw (DPST); DPST-NO/NC
- Normal State: Normally Open; Normally Closed
- Connections: Screw Terminal; Screw Terminal
from Radwell International
REPLACEMENT OF OMRON D4A-1105-N, LIMIT SWITCH - HEAVY DUTY, STANDARD BODY, SPDT, 1/2NPT, ROTARY HEAD, MAINTAINED -- SWITCH BODY PARTS NOT INTERCHANGEABLE W/ OEM. FREE 2 YEAR RADWELL WARRANTY [See More]
- Contact Type: Mantained Contact
- Switch Configuration: Single Pole, Double Throw (SPDT)
from DigiKey
FOOT SWITCH DPST 3A 240V [See More]
- Contact Type: Mantained Contact
- Switch Configuration: Double Pole, Single Throw (DPST); DPST-NO/NC
- Normal State: Normally Open; Normally Closed
- Connections: Screw Terminal; Screw Terminal
from Radwell International
SUBSTITUTE FOR HONEYWELL LSN1A, LIMIT SWITCH, HEAVY DUTY, STANDARD BODY, SPDT, 1/2NPT, ROTARY HEAD, MAINTAINED -- SWITCH BODY PARTS NOT INTERCHANGEABLE W/ OEM. FREE 2 YEAR RADWELL WARRANTY [See More]
- Contact Type: Mantained Contact
- Switch Configuration: Single Pole, Double Throw (SPDT)
from DigiKey
Switch [See More]
- Contact Type: Mantained Contact
- Switch Configuration: Single Pole, Single Throw (SPST); Single Pole, Double Throw (SPDT); SPDT + SPST-NO
- Normal State: Normally Open
- Actuator Type: Standard Roller
from Radwell International
LIMIT SWITCH, 600V, 10AMP, TYPE L, +OPTIONS, 3CONTACTS, MAINTAINED, ROTARY HEAD, SWITCH FUNCTION TPDT-DB. FREE 2 YEAR RADWELL WARRANTY [See More]
- Contact Type: Mantained Contact
from DigiKey
Switch [See More]
- Contact Type: Mantained Contact
- Actuator Type: Standard Roller; Adjustable Roller
- Switch Configuration: Double Pole, Double Throw (DPDT); DPDT
- Connections: Integral Cable; Cable Leads
from Radwell International
REPLACEMENT OF SIEMENS 60LAA1AN, LIMIT SWITCH, HEAVY DUTY, STANDARD BODY, SPDT, 1/2NPT, ROTARY HEAD, MAINTAINED. FREE 2 YEAR RADWELL WARRANTY [See More]
- Contact Type: Mantained Contact
- Switch Configuration: Single Pole, Double Throw (SPDT)
from DigiKey
LU SWITSWITZERLAND 06-66-102 [See More]
- Contact Type: Mantained Contact
- Switch Configuration: Single Pole, Single Throw (SPST); SPST-NO
- Normal State: Normally Open
- Connections: Integral Cable; Cable Leads
from DigiKey
LIMIT SWITSWITZERLAND EBC 602-9 [See More]
- Contact Type: Mantained Contact
- Switch Configuration: Double Pole, Single Throw (DPST); DPST-NO/NC
- Normal State: Normally Open; Normally Closed
- Connections: Screw Terminal; Screw Terminal
from DigiKey
PLUNGER SWITSWITZERLAND 44-01-06 [See More]
- Contact Type: Mantained Contact
- Switch Configuration: Single Pole, Single Throw (SPST); SPST-NO
- Normal State: Normally Open
- Connections: Solder Terminal; Solder Lug
from DigiKey
PLUNGER SWITSWITZERLAND 44-02-02 [See More]
- Contact Type: Mantained Contact
- Switch Configuration: Single Pole, Single Throw (SPST); SPST-NO
- Normal State: Normally Open
- Connections: Solder Terminal; Solder Lug
from DigiKey
LIMIT SWITSWITZERLAND G06-221-M- [See More]
- Contact Type: Mantained Contact
- Switch Configuration: Double Pole, Single Throw (DPST); DPST-NO/NC
- Normal State: Normally Open; Normally Closed
- Connections: Wire Leads
from DigiKey
LIMIT SWITSWITZERLAND G12-111-M- [See More]
- Contact Type: Mantained Contact
- Connections: Integral Cable; Cable Leads
- Switch Configuration: Single Pole, Double Throw (SPDT); SPDT
- Maximum Current Rating: 7
from DigiKey
LIMIT SWITSWITZERLAND G12-111-M- [See More]
- Contact Type: Mantained Contact
- Connections: Integral Cable; Cable Leads
- Switch Configuration: Single Pole, Double Throw (SPDT); SPDT
- Maximum Current Rating: 7
from DigiKey
LIMIT SWITSWITZERLAND G12-112-D [See More]
- Contact Type: Mantained Contact
- Connections: Connector
- Switch Configuration: Single Pole, Double Throw (SPDT); SPDT
- Maximum Current Rating: 7
from DigiKey
LIMIT SWITSWITZERLAND G12-211-S- [See More]
- Contact Type: Mantained Contact
- Connections: Integral Cable; Cable Leads
- Switch Configuration: Double Pole, Double Throw (DPDT); DPDT
- Maximum Current Rating: 7
from DigiKey
LIMIT SWITSWITZERLAND G12-212-D [See More]
- Contact Type: Mantained Contact
- Connections: Connector
- Switch Configuration: Double Pole, Double Throw (DPDT); DPDT
- Maximum Current Rating: 7
from DigiKey
LIMIT SWITSWITZERLAND G12-221-M- [See More]
- Contact Type: Mantained Contact
- Connections: Integral Cable; Cable Leads
- Switch Configuration: Double Pole, Double Throw (DPDT); DPDT
- Maximum Current Rating: 7
from Specialty Product Technologies
The EA780 switches have sliding, double break type contacts built to meet the high shock requirements outlined in MIL-S-901. The EA780 switches are available in two contact arrangements 1 N.O. - 1 N.C. & 2 N.O. - 2 N.C. The Standard B1 cam provides for cl. [See More]
- Contact Type: Mantained Contact
- Normal State: Normally Open; Normally Closed
- Switch Type: Electromechanical
- Actuator Type: Cam
from SVF Flow Controls, Inc.
The SVF model NEXUS-LS is a reliable and compact position feedback device fitted with two mechanical SPDT switches rated for 5A service. The NEMA 4/4X enclosure is designed for weather-proof protection and corrosion resistance in demanding environments. NEMA 4/4X (IP66) enclosure to satisfy outdoor... [See More]
- Contact Type: Mantained Contact
- Switch Configuration: Single Pole, Double Throw (SPDT)
- Switch Type: Electromechanical
- Actuator Type: Wobble Type (Spring)
from Honeywell Sensing & IoT
The MICRO SWITCH fully potted HDLS provides an extra degree of protection in harsh environments by sealing the basic switch cavity with epoxy. These switches are the same as the non plug-in HDLS except that the entire switch cavity is filled with epoxy in addition to the conduit entrance, and the... [See More]
- Contact Type: Mantained Contact
- Switch Configuration: Double Pole, Double Throw (DPDT)
- Normal State: Normally Open; Normally Closed
- Actuator Type: Standard Roller
from Eaton Corporation - Sensors
E50 Heavy-Duty Factory Sealed 6P+ Limit Switches Eaton's Cutler-Hammer E50 6P+ Limit Switch was specifically designed to withstand the penetrating properties of cutting fluids and coolants, such as those used in the automotive industry, as well as extreme shock, vibration and temperature... [See More]
- Contact Type: Mantained Contact
- Normal State: Normally Open; Normally Closed
- Switch Type: Electromechanical
- Switch Configuration: Single Pole, Double Throw (SPDT)
from SVF Flow Controls, Inc.
The SVF model NEXUS-LX is a reliable and compact feedback device fitted with two mechanical SPDT switches rated for 15A service. The NEXUS-LX is part of our family of NEXTEK Controls products for use in hazardous area environments. The ATEX rating and NEMA-7 enclosure combine to assure dependable... [See More]
- Contact Type: Mantained Contact
- Switch Configuration: Single Pole, Double Throw (SPDT)
- Switch Type: Electromechanical
- Actuator Type: Wobble Type (Spring)
from Honeywell Sensing & IoT
The MICRO SWITCH fully potted HDLS provides an extra degree of protection in harsh environments by sealing the basic switch cavity with epoxy. These switches are the same as the non plug-in HDLS except that the entire switch cavity is filled with epoxy in addition to the conduit entrance, and the... [See More]
- Contact Type: Mantained Contact
- Switch Configuration: Single Pole, Double Throw (SPDT)
- Normal State: Normally Open; Normally Closed
- Actuator Type: Standard Roller
from Eaton Corporation - Sensors
E50 Heavy-Duty Modular Limit Switches. The E50 Modular Plug-In Limit Switch from Eaton's Cutler-Hammer sensor business are the industry standard with versatility of design and high reliability for low maintenance, installation and inventory costs. Standard Viton ® gaskets, seals and boots and a... [See More]
- Contact Type: Mantained Contact
- Normal State: Normally Open; Normally Closed
- Switch Type: Electromechanical
- Switch Configuration: Single Pole, Double Throw (SPDT)
from SVF Flow Controls, Inc.
The NEXUS-PS is a low profile sensor that delivers valve position status in demanding environments (IP-67). The technology utilizes two reed devices that sense a magnetic target in the Open and Closed positions. The sensor element is SPST N.O. and the rotating component contains the magnetic target... [See More]
- Contact Type: Mantained Contact
- Switch Configuration: Single Pole, Single Throw (SPST)
- Switch Type: Electromechanical
- Maximum Current Rating: 0.3000
from Honeywell Sensing & IoT
MICRO SWITCH BAF/DTF high capacity enclosed switches offer elastomer boot on sealed actuator verions that protects the actuating mechanism and the internal basic switch from contaminants. There is a seal gasket between the cover plate and the enclosures on all versions. The cover plate is removed... [See More]
- Contact Type: Mantained Contact
- Switch Configuration: Single Pole, Double Throw (SPDT)
- Normal State: Normally Open; Normally Closed
- Actuator Type: Wobble Type (Spring)
from Honeywell Sensing & IoT
MICRO SWITCH CX switches are built especially for outdoor use in hazardous atmospheres. These enclosures are constructed to withstand the pressure of an internal explosion. Flame paths cool the exploded gases to a point less than the lowest safe operating temperature of the surrounding gas. The... [See More]
- Contact Type: Mantained Contact
- Switch Configuration: Single Pole, Double Throw (SPDT)
- Normal State: Normally Open; Normally Closed
- Actuator Type: Standard Roller
from Honeywell Sensing & IoT
MICRO SWITCH CX switches are built especially for outdoor use in hazardous atmospheres. These enclosures are constructed to withstand the pressure of an internal explosion. Flame paths cool the exploded gases to a point less than the lowest safe operating temperature of the surrounding gas. The... [See More]
- Contact Type: Mantained Contact
- Switch Configuration: Single Pole, Double Throw (SPDT)
- Normal State: Normally Open; Normally Closed
- Actuator Type: Standard Roller
from Honeywell Sensing & IoT
MICRO SWITCH CX switches are built especially for outdoor use in hazardous atmospheres. These enclosures are constructed to withstand the pressure of an internal explosion. Flame paths cool the exploded gases to a point less than the lowest safe operating temperature of the surrounding gas. The... [See More]
- Contact Type: Mantained Contact
- Switch Configuration: Single Pole, Double Throw (SPDT)
- Normal State: Normally Open; Normally Closed
- Actuator Type: Standard Roller
from Honeywell Sensing & IoT
MICRO SWITCH CX switches are built especially for outdoor use in hazardous atmospheres. These enclosures are constructed to withstand the pressure of an internal explosion. Flame paths cool the exploded gases to a point less than the lowest safe operating temperature of the surrounding gas. The... [See More]
- Contact Type: Mantained Contact
- Switch Configuration: Single Pole, Double Throw (SPDT)
- Normal State: Normally Open; Normally Closed
- Actuator Type: Standard Roller
from Honeywell Sensing & IoT
MICRO SWITCH CX switches are built especially for outdoor use in hazardous atmospheres. These enclosures are constructed to withstand the pressure of an internal explosion. Flame paths cool the exploded gases to a point less than the lowest safe operating temperature of the surrounding gas. The... [See More]
- Contact Type: Mantained Contact
- Switch Configuration: Single Pole, Double Throw (SPDT)
- Normal State: Normally Open; Normally Closed
- Actuator Type: Standard Roller
from Honeywell Sensing & IoT
MICRO SWITCH CX switches are built especially for outdoor use in hazardous atmospheres. These enclosures are constructed to withstand the pressure of an internal explosion. Flame paths cool the exploded gases to a point less than the lowest safe operating temperature of the surrounding gas. The... [See More]
- Contact Type: Mantained Contact
- Switch Configuration: Single Pole, Double Throw (SPDT)
- Normal State: Normally Open; Normally Closed
- Actuator Type: Standard Roller
from Honeywell Sensing & IoT
MICRO SWITCH CX switches are built especially for outdoor use in hazardous atmospheres. These enclosures are constructed to withstand the pressure of an internal explosion. Flame paths cool the exploded gases to a point less than the lowest safe operating temperature of the surrounding gas. The... [See More]
- Contact Type: Mantained Contact
- Switch Configuration: Single Pole, Double Throw (SPDT)
- Normal State: Normally Open; Normally Closed
- Actuator Type: Standard Roller
from Honeywell Sensing & IoT
MICRO SWITCH CX switches are built especially for outdoor use in hazardous atmospheres. These enclosures are constructed to withstand the pressure of an internal explosion. Flame paths cool the exploded gases to a point less than the lowest safe operating temperature of the surrounding gas. The... [See More]
- Contact Type: Mantained Contact
- Switch Configuration: Single Pole, Double Throw (SPDT)
- Normal State: Normally Open; Normally Closed
- Actuator Type: Standard Roller
from Honeywell Sensing & IoT
MICRO SWITCH CX switches are built especially for outdoor use in hazardous atmospheres. These enclosures are constructed to withstand the pressure of an internal explosion. Flame paths cool the exploded gases to a point less than the lowest safe operating temperature of the surrounding gas. The... [See More]
- Contact Type: Mantained Contact
- Switch Configuration: Single Pole, Double Throw (SPDT)
- Normal State: Normally Open; Normally Closed
- Actuator Type: Standard Roller
from Honeywell Sensing & IoT
MICRO SWITCH CX switches are built especially for outdoor use in hazardous atmospheres. These enclosures are constructed to withstand the pressure of an internal explosion. Flame paths cool the exploded gases to a point less than the lowest safe operating temperature of the surrounding gas. The... [See More]
- Contact Type: Mantained Contact
- Switch Configuration: Double Pole, Double Throw (DPDT)
- Normal State: Normally Open; Normally Closed
- Actuator Type: Standard Roller
from Honeywell Sensing & IoT
MICRO SWITCH CX switches are built especially for outdoor use in hazardous atmospheres. These enclosures are constructed to withstand the pressure of an internal explosion. Flame paths cool the exploded gases to a point less than the lowest safe operating temperature of the surrounding gas. The... [See More]
- Contact Type: Mantained Contact
- Switch Configuration: Single Pole, Double Throw (SPDT)
- Normal State: Normally Open; Normally Closed
- Actuator Type: Standard Roller
from Honeywell Sensing & IoT
MICRO SWITCH CX switches are built especially for outdoor use in hazardous atmospheres. These enclosures are constructed to withstand the pressure of an internal explosion. Flame paths cool the exploded gases to a point less than the lowest safe operating temperature of the surrounding gas. The... [See More]
- Contact Type: Mantained Contact
- Switch Configuration: Single Pole, Double Throw (SPDT)
- Normal State: Normally Open; Normally Closed
- Actuator Type: Standard Roller
from Honeywell Sensing & IoT
MICRO SWITCH CX switches are built especially for outdoor use in hazardous atmospheres. These enclosures are constructed to withstand the pressure of an internal explosion. Flame paths cool the exploded gases to a point less than the lowest safe operating temperature of the surrounding gas. The... [See More]
- Contact Type: Mantained Contact
- Switch Configuration: Single Pole, Double Throw (SPDT)
- Normal State: Normally Open; Normally Closed
- Actuator Type: Standard Roller
from Honeywell Sensing & IoT
MICRO SWITCH CX switches are built especially for outdoor use in hazardous atmospheres. These enclosures are constructed to withstand the pressure of an internal explosion. Flame paths cool the exploded gases to a point less than the lowest safe operating temperature of the surrounding gas. The... [See More]
- Contact Type: Mantained Contact
- Switch Configuration: Single Pole, Double Throw (SPDT)
- Normal State: Normally Open; Normally Closed
- Actuator Type: Standard Roller
from Honeywell Sensing & IoT
MICRO SWITCH CX switches are built especially for outdoor use in hazardous atmospheres. These enclosures are constructed to withstand the pressure of an internal explosion. Flame paths cool the exploded gases to a point less than the lowest safe operating temperature of the surrounding gas. The... [See More]
- Contact Type: Mantained Contact
- Switch Configuration: Single Pole, Double Throw (SPDT)
- Normal State: Normally Open; Normally Closed
- Actuator Type: Standard Roller
from Honeywell Sensing & IoT
MICRO SWITCH CX switches are built especially for outdoor use in hazardous atmospheres. These enclosures are constructed to withstand the pressure of an internal explosion. Flame paths cool the exploded gases to a point less than the lowest safe operating temperature of the surrounding gas. The... [See More]
- Contact Type: Mantained Contact
- Switch Configuration: Single Pole, Double Throw (SPDT)
- Normal State: Normally Open; Normally Closed
- Actuator Type: Standard Roller
from Honeywell Sensing & IoT
MICRO SWITCH CX switches are built especially for outdoor use in hazardous atmospheres. These enclosures are constructed to withstand the pressure of an internal explosion. Flame paths cool the exploded gases to a point less than the lowest safe operating temperature of the surrounding gas. The... [See More]
- Contact Type: Mantained Contact
- Switch Configuration: Single Pole, Double Throw (SPDT)
- Normal State: Normally Open; Normally Closed
- Actuator Type: Standard Roller
from Honeywell Sensing & IoT
MICRO SWITCH CX switches are built especially for outdoor use in hazardous atmospheres. These enclosures are constructed to withstand the pressure of an internal explosion. Flame paths cool the exploded gases to a point less than the lowest safe operating temperature of the surrounding gas. The... [See More]
- Contact Type: Mantained Contact
- Switch Configuration: Single Pole, Double Throw (SPDT)
- Normal State: Normally Open; Normally Closed
- Actuator Type: Standard Roller
from Honeywell Sensing & IoT
MICRO SWITCH CX switches are built especially for outdoor use in hazardous atmospheres. These enclosures are constructed to withstand the pressure of an internal explosion. Flame paths cool the exploded gases to a point less than the lowest safe operating temperature of the surrounding gas. The... [See More]
- Contact Type: Mantained Contact
- Switch Configuration: Double Pole, Double Throw (DPDT)
- Normal State: Normally Open; Normally Closed
- Actuator Type: Standard Roller
from Honeywell Sensing & IoT
MICRO SWITCH CX switches are built especially for outdoor use in hazardous atmospheres. These enclosures are constructed to withstand the pressure of an internal explosion. Flame paths cool the exploded gases to a point less than the lowest safe operating temperature of the surrounding gas. The... [See More]
- Contact Type: Mantained Contact
- Switch Configuration: Single Pole, Double Throw (SPDT)
- Normal State: Normally Open; Normally Closed
- Actuator Type: Standard Roller
from Honeywell Sensing & IoT
MICRO SWITCH CX switches are built especially for outdoor use in hazardous atmospheres. These enclosures are constructed to withstand the pressure of an internal explosion. Flame paths cool the exploded gases to a point less than the lowest safe operating temperature of the surrounding gas. The... [See More]
- Contact Type: Mantained Contact
- Switch Configuration: Single Pole, Double Throw (SPDT)
- Normal State: Normally Open; Normally Closed
- Actuator Type: Standard Roller
from Honeywell Sensing & IoT
MICRO SWITCH E6/V6 Series medium-duty limit switches feature an electrostatic applied epoxy coating to the zinc housings enhance the durability of the product in most environments. The E6/V6 family of switches incorporates the MICRO SWITCH BZ switch element which has the reliable snap-spring... [See More]
- Contact Type: Mantained Contact
- Switch Configuration: Single Pole, Double Throw (SPDT)
- Normal State: Normally Open; Normally Closed
- Actuator Type: Wobble Type (Spring)