Metal Ball with Non-metallic Liner Rod End Bearings
from RS Components, Ltd.
Rod end with external thread, right hand [See More]
- Configuration: Metal Ball with Non-metallic Liner
- Bore Diameter: 0.7874
- Design Units: Metric
- Overall Length: 4.11
from THK America, Inc.
A no lubrication type that uses self-lubricating synthetic resin formed between the steel holder and the spherical inner ring. Since the clearance on the sliding surface is minimized, accurate link motion is achieved. *THK standard Rod Ends are for machine applications only. The products listed... [See More]
- Configuration: Metal Ball with Non-metallic Liner
- Bore Diameter: 0.1181 to 0.8661
- Design Units: Metric
- Length Through Bore: 0.2362 to 1.1
from THK America, Inc.
This model is a no-lubrication rod end that is basically the same as the female threading type model NHS, but has a male thread on the holder end. *THK standard Rod Ends are for machine applications only. The products listed below are not recommended for automotive applications. [See More]
- Configuration: Metal Ball with Non-metallic Liner
- Bore Diameter: 0.1181 to 0.8661
- Design Units: Metric
- Length Through Bore: 0.2362 to 1.1
from Triangle Manufacturing Company
Our rod end mounted bearings, or linkages, are made from 16-gage galvanized steel. They are used on medium to light duty connecting rods or cranks for farm equipment, packaging machinery, etc. Intended to bolt to a connecting rod, rod end mounted bearings are available in self-aligning nylon or... [See More]
- Configuration: Metal Ball with Non-metallic Liner
- Bore Diameter: 0.3750
- Design Units: Inch
- Length Through Bore: 0.5000
from Quality Bearings & Components
Two-Piece | Commerical | Stainless Steel. ROD ENDS FEMALE SERIES - INCH. Body - 303 Stainless Steel Passivated. Ball - 440C Stainless Steel Heat-Treated. Liner - PTFE Fabric. Self-Lubricating Liner [See More]
- Configuration: Metal Ball with Non-metallic Liner
- Bore Diameter: 0.6250
- Design Units: Inch
- Length Through Bore: 0.7500
from IKO International, Inc.
PILLOBALLS are compact, self-aligning spherical bushings that support large radial loads and bidirectional axial loads at the same time. Several styles are available to provide smooth rotational and oscillatory motion, classified by different sliding surfaces. Widely used in control and link... [See More]
- Configuration: Metal Ball with Non-metallic Liner
- Bore Diameter: 0.1181 to 1.18
- Design Units: Metric
- Length Through Bore: 0.2362 to 1.46
from Cablecraft Motion Controls
Suitable for many heavier load industrial and racing applications,the Tuthill RMX/RMX-T Series employs a 3-piece high strength alloy body (or PTFE lined) rod end design, but with an increased body and larger "step shank" thread size for increased radial and axial strength applications. The ball is... [See More]
- Configuration: Metal Ball with Non-metallic Liner
- Bore Diameter: 0.1900
- Design Units: Inch
- Length Through Bore: 0.3120
from Quality Bearings & Components
Two-Piece | Commerical | Stainless Steel. ROD ENDS MALE SERIES - INCH. Body - 303 Stainless Steel Passivated. Ball - 440C Stainless Steel Heat-Treated. Liner - PTFE Fabric. Optional Self-Lubricating Liner [See More]
- Configuration: Metal Ball with Non-metallic Liner
- Bore Diameter: 0.6250
- Design Units: Inch
- Length Through Bore: 0.7500
from Cablecraft Motion Controls
Suitable for many high precision motion control applications with high corrosion and/or "clean room or food grade" environments. The Tuthill SSAM-T/SSAF-T Series offers a stainless steel throughout, PTFE lined steel race rod end design. It delivers the ultimate in corrosion resistance benefits,... [See More]
- Configuration: Metal Ball with Non-metallic Liner
- Bore Diameter: 0.1900
- Design Units: Inch
- Length Through Bore: 0.4370
from Cablecraft Motion Controls
Suitable for many high precision motion control applications with high corrosion and/or "clean room or food grade" environments. The Tuthill SSAM-T/SSAF-T Series offers a stainless steel throughout, PTFE lined steel race rod end design. It delivers the ultimate in corrosion resistance benefits,... [See More]
- Configuration: Metal Ball with Non-metallic Liner
- Bore Diameter: 0.1900
- Design Units: Inch
- Length Through Bore: 0.4370
from Cablecraft Motion Controls
Suitable for many high precision motion control applications within high corrosion and/or "clean room or food grade" environments. The Tuthill SSHM-T Series offers a stainless steel throughout, PTFE lined steel race rod end design — but in a heavy duty step shank design to increase capacity... [See More]
- Configuration: Metal Ball with Non-metallic Liner
- Bore Diameter: 0.2500
- Design Units: Inch
- Length Through Bore: 0.4370
from Cablecraft Motion Controls
Suitable for many high precision motion control applications within high corrosion and/or "clean room or food grade" environments. The Tuthill SSHMY-T Series offers a stainless steel throughout, PTFE lined steel race rod end design — but in a design that combines the strength benefits of the... [See More]
- Configuration: Metal Ball with Non-metallic Liner
- Bore Diameter: 0.2500
- Design Units: Inch
- Length Through Bore: 0.5930
from Cablecraft Motion Controls
Suitable for many heavy load, high precision motion control applications,the Tuthill TSMX-T/TSFX-T Series brings an upgrade of heavy duty performance to a Teflon* lined, 3-piece precision rod end design (housing uses a heat treated alloy material instead of standard steels used in other 2- and... [See More]
- Configuration: Metal Ball with Non-metallic Liner
- Bore Diameter: 0.1900
- Design Units: Inch
- Length Through Bore: 0.3120
from Cablecraft Motion Controls
Suitable for many heavy load, high precision motion control applications,the Tuthill TSMX-T/TSFX-T Series brings an upgrade of heavy duty performance to a Teflon* lined, 3-piece precision rod end design (housing uses a heat treated alloy material instead of standard steels used in other 2- and... [See More]
- Configuration: Metal Ball with Non-metallic Liner
- Bore Diameter: 0.1900
- Design Units: Inch
- Length Through Bore: 0.3120