Male Rod End Bearings
from THK America, Inc.
The holder made of high strength zinc alloy is connected perpendicularly to the shank incorporated with a ball. With a grease pocket formed on the top and bottom of the spherical area, this model achieves high lubricity and high wear resistance. *THK standard link balls are for machine applications... [See More]
- Type: Male; Female
- Bore Diameter: 0.2953 to 0.8661
- Design Units: Metric
- Length Through Bore: 0.3150 to 1.34
from Hangzhou Chinabase Machinery Co., Ltd.
Rod body with right or left-hand male thread.Outer race lined with bronze liner.Surface of rod body zinc plated,rod body with a lubricating hole or grease nipple. [See More]
- Type: Male
- Bore Diameter: 0.1969 to 1.18
- Design Units: Metric
- Length Through Bore: 0.3150 to 1.46
from Imao-Fixtureworks
Body. Polyamide (glass-fiber reinforced). Black. Rod Cap. Polyamide. Ivory [See More]
- Type: Male; Female
- Bore Diameter: 0.2362 to 0.5512
- Design Units: Metric
- Length Through Bore: 0.3543 to 0.7480
from RS Components, Ltd.
Male Rod-End 5mm Bore M5 x 0.8 Right Han [See More]
- Type: Male
- Bore Diameter: 0.1969
- Design Units: Metric
- Overall Length: 1.61
from THK America, Inc.
With this Link Ball model, the high strength zinc alloy is used in its holder, and the mounting bolt and the holder are arranged on the same axis, allowing this model to receive an axial load. Since grease is contained in the boot, this model achieves high lubricity and high wear resistance. *THK... [See More]
- Type: Male; Female
- Housing Diameter: 0.6693 to 1.57
- Design Units: Metric
- Overall Length: 1.81 to 4.69
from RS Components, Ltd.
Male Rod-End 6mm Bore M6 x 1.0 Right Han [See More]
- Type: Male
- Bore Diameter: 0.2362
- Design Units: Metric
- Overall Length: 1.77
from THK America, Inc.
This model is a no-lubrication rod end that is basically the same as the female threading type model NHS, but has a male thread on the holder end. *THK standard Rod Ends are for machine applications only. The products listed below are not recommended for automotive applications. [See More]
- Type: Male
- Bore Diameter: 0.1181 to 0.8661
- Design Units: Metric
- Length Through Bore: 0.2362 to 1.1
from RS Components, Ltd.
Male Rod-End 8mm Bore M8 x 1.25 Right Ha [See More]
- Type: Male
- Bore Diameter: 0.3150
- Design Units: Metric
- Overall Length: 2.09
from THK America, Inc.
This model is a highly rigid rod end that is basically the same as the female threading type model PHS, but has a male thread on the holder end. *THK standard Rod Ends are for machine applications only. The products listed below are not recommended for automotive applications. View specifications... [See More]
- Type: Male
- Bore Diameter: 0.1969 to 1.18
- Design Units: Metric
- Length Through Bore: 0.3150 to 1.46
from RS Components, Ltd.
Male Rod-End 10mm Bore M10 x 1.5 Right H [See More]
- Type: Male
- Bore Diameter: 0.3937
- Design Units: Metric
- Overall Length: 2.4
from RS Components, Ltd.
Male Rod-End 12mm Bore M12 x 1.75 Right [See More]
- Type: Male
- Bore Diameter: 0.4724
- Design Units: Metric
- Overall Length: 2.72
from RS Components, Ltd.
Male Rod-End 14mm Bore M14 x 2 Right Han [See More]
- Type: Male
- Bore Diameter: 0.5512
- Design Units: Metric
- Overall Length: 3.03
from RS Components, Ltd.
Male Rod-End 16mm Bore M16 x 2 Right Han [See More]
- Type: Male
- Bore Diameter: 0.6299
- Design Units: Metric
- Overall Length: 3.35
from RS Components, Ltd.
Male Rod-End 20mm Bore M20 x 1.5 Right H [See More]
- Type: Male
- Bore Diameter: 0.7874
- Design Units: Metric
- Overall Length: 3.98
from RS Components, Ltd.
Male Rod-End 25mm Bore M24 x 2 Right Han [See More]
- Type: Male
- Bore Diameter: 0.9843
- Design Units: Metric
- Overall Length: 4.88
from RS Components, Ltd.
Male Rod-End 5mm Bore M5 x 0.8 Left Hand [See More]
- Type: Male
- Bore Diameter: 0.1969
- Design Units: Metric
- Overall Length: 1.61
from RS Components, Ltd.
Male Rod-End 6mm Bore M6 x 1.0 Left Hand [See More]
- Type: Male
- Bore Diameter: 0.2362
- Design Units: Metric
- Overall Length: 1.77
from RS Components, Ltd.
Male Rod-End 8mm Bore M8 x 1.25 Left Han [See More]
- Type: Male
- Bore Diameter: 0.3150
- Design Units: Metric
- Overall Length: 2.09
from RS Components, Ltd.
Male Rod-End 10mm Bore M10 x 1.5 Left Ha [See More]
- Type: Male
- Bore Diameter: 0.3937
- Design Units: Metric
- Overall Length: 2.4
from RS Components, Ltd.
Male Rod-End 12mm Bore M12 x 1.75 Left H [See More]
- Type: Male
- Bore Diameter: 0.4724
- Design Units: Metric
- Overall Length: 2.72
from RS Components, Ltd.
Male Rod-End 14mm Bore M14 x 2 Left Hand [See More]
- Type: Male
- Bore Diameter: 0.5512
- Design Units: Metric
- Overall Length: 3.03
from RS Components, Ltd.
Male Rod-End 16mm Bore M16 x 2 Left Hand [See More]
- Type: Male
- Bore Diameter: 0.6299
- Design Units: Metric
- Overall Length: 3.35
from RS Components, Ltd.
Male Rod-End 20mm Bore M20 x 1.5 Left Ha [See More]
- Type: Male
- Bore Diameter: 0.7874
- Design Units: Metric
- Overall Length: 3.98
from RS Components, Ltd.
Male Rod-End 6mm Bore M6 x 1.0 Right Han [See More]
- Type: Male
- Bore Diameter: 0.2362
- Design Units: Metric
- Overall Length: 1.77
from RS Components, Ltd.
Male Rod-End 8mm Bore M8 x 1.25 Right Ha [See More]
- Type: Male
- Bore Diameter: 0.3150
- Design Units: Metric
- Overall Length: 2.09
from RS Components, Ltd.
Male Rod-End 10mm Bore M10 x 1.5 Right H [See More]
- Type: Male
- Bore Diameter: 0.3937
- Design Units: Metric
- Overall Length: 2.4
from RS Components, Ltd.
Male Rod-End 12mm Bore M12 x 1.75 Right [See More]
- Type: Male
- Bore Diameter: 0.4724
- Design Units: Metric
- Overall Length: 2.72
from RS Components, Ltd.
Male Rod-End 14mm Bore M14 x 2 Right Han [See More]
- Type: Male
- Bore Diameter: 0.5512
- Design Units: Metric
- Overall Length: 3.03
from RS Components, Ltd.
Male Rod-End 16mm Bore M16 x 2 Right Han [See More]
- Type: Male
- Bore Diameter: 0.6299
- Design Units: Metric
- Overall Length: 3.35
from RS Components, Ltd.
Male Rod-End 6mm Bore M6 x 1.0 Left Hand [See More]
- Type: Male
- Bore Diameter: 0.2362
- Design Units: Metric
- Overall Length: 1.77
from RS Components, Ltd.
Male Rod-End 8mm Bore M8 x 1.25 Left Han [See More]
- Type: Male
- Bore Diameter: 0.3150
- Design Units: Metric
- Overall Length: 2.09
from FUTEK Advanced Sensor Technology, Inc.
ZAC100 , Male Rod-End Bearing , Male Rod-End Bearing w/Jam-Nut , Material - Zinc Plated Steel , #10-32-Thread , Standard , Max Load 900 lb (F1146-1) [See More]
- Type: Male
- Load Capacity: 900
- Design Units: Inch
- Configuration: Metal Ball with Metal Liner
from igus® inc.
igubal ® Rod End Bearing, Dimensional Series K, Housing A [See More]
- Type: Male
- Bore Diameter: 0.1969 to 0.7874
- Design Units: Metric
- Length Through Bore: 0.3150 to 0.9843
from Quality Bearings & Components
Four-Piece | Commerical. ROD ENDS MALE SERIES - INCH. Body - Carbon Steel Coaed for Corrosion Resistance. Ball - 52100 Alloy Steel Heat-Treated, Chrome Plated. Insert -Brass. Metal-to-Metal. Optional Lubricator. NOTE: Also available with grease fitting. [See More]
- Type: Male
- Bore Diameter: 0.1900
- Design Units: Inch
- Length Through Bore: 0.3120
from Cablecraft Motion Controls
Suitable for many high precision/mechanical motion transfer applications, the Tuthill DBM/DBF Series offers a four-piece, bronze race design in metric thread sizing. Its oil impregnated bronze raceway delivers precise and extremely low friction performance, leading to longer wear life, higher... [See More]
- Type: Male
- Bore Diameter: 0.1969
- Design Units: Metric
- Length Through Bore: 0.3150
from Alinabal Motion Transfer Devices
Two piece construction, steel on steel [See More]
- Type: Male
- Bore Diameter: 0.6250
- Design Units: Inch
- Length Through Bore: 0.7500
from Princess Auto Limited
1/2 " Thread Male Rod End [See More]
- Type: Male
- Major Diameter: 0.5000
from Emerson Bearing Co.
Heavy-duty male thread rod ends with integral spherical plain bearing. These heavy duty metric rod ends are available with rolling elements to provide medium to heavy load carrying at medium to high speeds. Excellent for shock loads. This series is: Male threaded. Maintenance free. Adapter sizes... [See More]
- Type: Male
- Load Capacity: 879
- Design Units: Metric
- Direction: Right Hand
from RBC Bearings
The first integral rod end was invented by an RBC division named Heim Bearings. The rod end is also referred to as the Heim Joint named after the inventor Lewis Heim who founded the Heim Bearing Company. While spherical plain bearings offer misalignment capability in a fixed housing position; rod... [See More]
- Type: Male
- Bore Diameter: 0.7500
- Design Units: Inch
- Length Through Bore: 0.6560
from FUTEK Advanced Sensor Technology, Inc.
ZAC100, Male Rod-End Bearing , Rod End Bearing (Male) with Nut , Material - Zinc-Plated Steel , 3/8-24-Thread , Standard , Max Load 3000 lb [See More]
- Type: Male
- Load Capacity: 3000
- Design Units: Inch
- Configuration: Metal Ball with Metal Liner
from igus® inc.
igubal ® Rod End Bearing, Dimensional Series E, Housing A, Metric Dimensions [See More]
- Type: Male
- Bore Diameter: 0.1969 to 1.18
- Design Units: Metric
- Length Through Bore: 0.2362 to 1.18
from Quality Bearings & Components
Two-Piece | Commerical | Extra Capacity. ROD ENDS MALE SERIES - INCH. Body - Carbon Steel Coated for Corrosion Resistance. Ball - 52100 Alloy Steel Heat-Treated, Hard Chrome Plated. Optional Self-Lubricating Liner. NOTE: Grease fittings available. [See More]
- Type: Male
- Bore Diameter: 0.1900
- Design Units: Inch
- Length Through Bore: 0.3120
from Cablecraft Motion Controls
Suitable for many heavier load industrial and racing applications,the Tuthill RMX/RMX-T Series employs a 3-piece high strength alloy body (or PTFE lined) rod end design, but with an increased body and larger "step shank" thread size for increased radial and axial strength applications. The ball is... [See More]
- Type: Male
- Bore Diameter: 0.1900
- Design Units: Inch
- Length Through Bore: 0.3120
from Alinabal Motion Transfer Devices
Two piece construction, steel on steel [See More]
- Type: Male
- Bore Diameter: 0.6250
- Design Units: Inch
- Length Through Bore: 0.7500
from Princess Auto Limited
1/4 " Thread Male Rod End [See More]
- Type: Male
- Major Diameter: 0.2500
from Emerson Bearing Co.
Heavy-duty male thread rod ends with integral self-aligning ball bearing. These heavy duty metric rod ends are available with rolling elements to provide medium to heavy load carrying at medium to high speeds. Excellent for shock loads. This series is/has: Male threaded. Longtime lubrication, low... [See More]
- Type: Male
- Load Capacity: 618
- Design Units: Metric
- Direction: Right Hand
from FUTEK Advanced Sensor Technology, Inc.
ZAC100, Male Rod-End Bearing , Rod End Bearing (Male) with Nut , Material - Stainless Steel , M5x 0.8-Thread , Standard , Max Load 680 lb [See More]
- Type: Male
- Load Capacity: 680
- Design Units: Metric
- Configuration: Metal Ball with Metal Liner
from igus® inc.
igubal ® Rod End Bearing, Dimensional Series K, Housing A, Metric [See More]
- Type: Male
- Bore Diameter: 0.1969 to 1.18
- Design Units: Metric
- Length Through Bore: 0.3150 to 1.46
from Quality Bearings & Components
Four-Piece | Precision. ROD ENDS MALE SERIES - INCH. Body - Carbon Steel Coated for Corrosion Resistance. Ball - 52100 Steel Rc 56 min. Heat-Treated, Hard Chrome Plated. Insert - Brass. Metal-to-Metal *Size 160 has a one-Piece Carbon Steel race. Tolerance for size 160, "D" and "H" is +.030, -.010. [See More]
- Type: Male
- Bore Diameter: 0.1900
- Design Units: Inch
- Length Through Bore: 0.3120
from Cablecraft Motion Controls
Suitable for many high precision motion control applications with high corrosion and/or "clean room or food grade" environments. The Tuthill SSAM-T/SSAF-T Series offers a stainless steel throughout, PTFE lined steel race rod end design. It delivers the ultimate in corrosion resistance benefits,... [See More]
- Type: Male
- Bore Diameter: 0.1900
- Design Units: Inch
- Length Through Bore: 0.4370
from Alinabal Motion Transfer Devices
Two piece construction, steel on steel [See More]
- Type: Male
- Bore Diameter: 0.6250
- Design Units: Inch
- Length Through Bore: 0.7500
from Princess Auto Limited
3/4 " -16 Thread Male Rod End [See More]
- Type: Male
- Major Diameter: 0.7500
from Emerson Bearing Co.
Rod ends and spherical bushings are used for linkage applications where a bearing has to accommodate severe misalignment. They are available with self lubricating or metal to metal inserts. Inch and metric. Standard rod ends have right hand threads although left hand threads are available as an... [See More]
- Type: Male
- Bore Diameter: 0.6250
- Design Units: Inch
- Length Through Bore: 0.7500
from igus® inc.
igubal ® Rod End Bearing, High Temperature, Dimensional Series E, Housing A, Metric [See More]
- Type: Male
- Bore Diameter: 0.1969 to 0.4724
- Design Units: Metric
- Length Through Bore: 0.1969 to 0.3937
from Quality Bearings & Components
Three-Piece | Aluminum Series| Extra Strength. ROD ENDS MALE SERIES - INCH. Body - Aluminum 7075-T6, Hard Anodized Red. Ball - 52100 Steel Rc 56 min. Hard, Hard Chrome Plated. Race - Steel Alloy, Heat-Treated, Zinc Plated, Chromate Treated. Heavy-Duty Shank. Optional Lubricator. Optional... [See More]
- Type: Male
- Bore Diameter: 0.6250
- Design Units: Inch
- Length Through Bore: 0.7500
from Cablecraft Motion Controls
Suitable for many high precision motion control applications within high corrosion and/or "clean room or food grade" environments. The Tuthill SSHM-T Series offers a stainless steel throughout, PTFE lined steel race rod end design — but in a heavy duty step shank design to increase capacity... [See More]
- Type: Male
- Bore Diameter: 0.2500
- Design Units: Inch
- Length Through Bore: 0.4370
from Alinabal Motion Transfer Devices
Two piece construction, steel on steel [See More]
- Type: Male
- Bore Diameter: 0.6250
- Design Units: Inch
- Length Through Bore: 0.7500
from Princess Auto Limited
3/8 " Thread Male Rod End [See More]
- Type: Male
- Major Diameter: 0.3750
from igus® inc.
igubal ® Rod End Bearing, Dimensional Series K, Housing A, Inch [See More]
- Type: Male
- Bore Diameter: 0.1900 to 0.7500
- Design Units: Inch
- Length Through Bore: 0.3120 to 0.8750
from Quality Bearings & Components
Four-Piece | Precision | Extra Capacity. ROD ENDS MALE SERIES - INCH. Body - 4130 or 4340 Alloy Steel Heat-Treated, Coated for Corrosion Resistance. Ball - 52100 Alloy Steel Heat-Treated, Hard Chrome Plated. Insert - Copper Alloy. Metal-to-Metal. Magnetic Particle Inspected. Grease Lubricator. NOTE:... [See More]
- Type: Male
- Bore Diameter: 0.2500
- Design Units: Inch
- Length Through Bore: 0.3750
from Cablecraft Motion Controls
Suitable for many high precision motion control applications within high corrosion and/or "clean room or food grade" environments. The Tuthill SSHMY-T Series offers a stainless steel throughout, PTFE lined steel race rod end design — but in a design that combines the strength benefits of the... [See More]
- Type: Male
- Bore Diameter: 0.2500
- Design Units: Inch
- Length Through Bore: 0.5930
from Alinabal Motion Transfer Devices
Aluminum housing, steel ball, fully staked construction with carbon fiber reinforced nylon race. [See More]
- Type: Male
- Bore Diameter: 0.5000
- Design Units: Inch
- Length Through Bore: 0.6250
from Princess Auto Limited
5/16 " Thread Male Rod End [See More]
- Type: Male
- Major Diameter: 0.3125
from igus® inc.
igubal ® Rod End Bearing, Housing A, Dimensional Series E, Metric Sizes, J4 [See More]
- Type: Male
- Bore Diameter: 0.1969 to 0.7874
- Design Units: Metric
- Length Through Bore: 0.2362 to 0.6299
from Cablecraft Motion Controls
Suitable for many heavy load, high precision motion control applications, the Tuthill TSMX/TSFX Series brings an upgrade of heavy duty performance to a precision 3-piece metal to metal rod end design (housing uses a heat treated alloy material instead of standard steels used in other 2- and 3-piece... [See More]
- Type: Male
- Bore Diameter: 0.1900
- Design Units: Inch
- Length Through Bore: 0.3120
from Alinabal Motion Transfer Devices
Aluminum housing, steel ball, fully staked construction with carbon fiber reinforced nylon race. [See More]
- Type: Male
- Bore Diameter: 0.5000
- Design Units: Inch
- Length Through Bore: 0.6250
from Princess Auto Limited
5/8 " Thread Male Rod End [See More]
- Type: Male
- Major Diameter: 0.6250
from igus® inc.
igubal ® Rod End Bearing, Housing A, Dimensional Series E, Metric Sizes, R [See More]
- Type: Male
- Bore Diameter: 0.1969 to 0.7874
- Design Units: Metric
- Length Through Bore: 0.2362 to 0.6299
from Cablecraft Motion Controls
Suitable for many heavy load, high precision motion control applications, the Tuthill TSMX/TSFX Series brings an upgrade of heavy duty performance to a precision 3-piece metal to metal rod end design (housing uses a heat treated alloy material instead of standard steels used in other 2- and 3-piece... [See More]
- Type: Male
- Bore Diameter: 0.1900
- Design Units: Inch
- Length Through Bore: 0.3120
from Alinabal Motion Transfer Devices
High capacity chrome moly steel housing, ball and race. [See More]
- Type: Male
- Bore Diameter: 0.6250
- Design Units: Inch
- Length Through Bore: 0.7500
from igus® inc.
igubal ® Rod End Bearing, Housing A, Dimensional Series E, Metric Sizes, J [See More]
- Type: Male
- Bore Diameter: 0.1969 to 0.7874
- Design Units: Metric
- Length Through Bore: 0.2362 to 0.6299
from Cablecraft Motion Controls
Suitable for many heavy load, high precision motion control applications,the Tuthill TSMX-T/TSFX-T Series brings an upgrade of heavy duty performance to a Teflon* lined, 3-piece precision rod end design (housing uses a heat treated alloy material instead of standard steels used in other 2- and... [See More]
- Type: Male
- Bore Diameter: 0.1900
- Design Units: Inch
- Length Through Bore: 0.3120
from Alinabal Motion Transfer Devices
High capacity chrome moly steel housing, ball and race. [See More]
- Type: Male
- Bore Diameter: 0.6250
- Design Units: Inch
- Length Through Bore: 0.7500
from igus® inc.
Special properties of igubal ® rod end bearings CL. Smooth design prevents dirt buildup. Different ball materials available for diverse applications. Compensation for misalignment. Lightweight. Corrosion resistant. Self-lubricating and maintenance-free. Simple to install [See More]
- Type: Male
- Bore Diameter: 0.2362 to 0.4724
- Design Units: Metric
- Length Through Bore: 0.3543 to 0.6299
from Alinabal Motion Transfer Devices
Elastomeric rod ends for noise and vibration reduction. SPECIAL ORDER ITEM ONLY! [See More]
- Type: Male
- Load Capacity: 180
- Design Units: Inch
- Direction: Left Hand
from igus® inc.
Special properties of igubal ® rod end bearings CL. Smooth design prevents dirt buildup. Different ball materials available for diverse applications. Compensation for misalignment. Lightweight. Corrosion resistant. Self-lubricating and maintenance-free. Simple to install [See More]
- Type: Male
- Bore Diameter: 0.2362 to 0.4724
- Design Units: Metric
- Length Through Bore: 0.3543 to 0.6299
from Alinabal Motion Transfer Devices
Elastomeric rod ends for noise and vibration reduction. SPECIAL ORDER ITEM ONLY! [See More]
- Type: Male
- Load Capacity: 30
- Design Units: Inch
- Direction: Left Hand
from igus® inc.
Special properties of igubal ® rod end bearings CL. Smooth design prevents dirt buildup. Different ball materials available for diverse applications. Compensation for misalignment. Lightweight. Corrosion resistant. Self-lubricating and maintenance-free. Simple to install [See More]
- Type: Male
- Bore Diameter: 0.2362 to 0.4724
- Design Units: Metric
- Length Through Bore: 0.3543 to 0.6299
from Alinabal Motion Transfer Devices
Large Bore Series 1" and larger rod end and spherical bearings. . [See More]
- Type: Male
- Bore Diameter: 1
- Design Units: Inch
- Length Through Bore: 1.38
from igus® inc.
Special properties of igubal ® rod end bearings CL. Smooth design prevents dirt buildup. Different ball materials available for diverse applications. Compensation for misalignment. Lightweight. Corrosion resistant. Self-lubricating and maintenance-free. Simple to install [See More]
- Type: Male
- Bore Diameter: 0.2362 to 0.4724
- Design Units: Metric
- Length Through Bore: 0.3543 to 0.6299
from Alinabal Motion Transfer Devices
Steel housing and ball with injection molded nylon race. [See More]
- Type: Male
- Bore Diameter: 0.6250
- Design Units: Inch
- Length Through Bore: 0.7500
from Alinabal Motion Transfer Devices
Steel housing and ball with injection molded nylon race. [See More]
- Type: Male
- Bore Diameter: 0.6250
- Design Units: Inch
- Length Through Bore: 0.7500
from Alinabal Motion Transfer Devices
Steel housing and ball with injection molded nylon race. [See More]
- Type: Male
- Length Through Bore: 0.7500
- Design Units: Inch
- Housing Diameter: 1.5
from Alinabal Motion Transfer Devices
Steel housing and ball with injection molded nylon race. [See More]
- Type: Male
- Length Through Bore: 0.7500
- Design Units: Inch
- Housing Diameter: 1.5
from Alinabal Motion Transfer Devices
S-Series - Full Enclosure, Studded, Booted. [See More]
- Type: Male; Female
- Description: Ball Stud Material: Steel-Case Hardened
- Design Units: Inch
- Direction: Right Hand; Left Hand
from Alinabal Motion Transfer Devices
Steel housing and ball, fully staked construction with carbon fiber reinforced nylon race. [See More]
- Type: Male
- Bore Diameter: 0.6250
- Design Units: Inch
- Length Through Bore: 0.7500
from Alinabal Motion Transfer Devices
Four piece construction, oil impregnated phosphor bronze race. [See More]
- Type: Male
- Bore Diameter: 0.6250
- Design Units: Inch
- Length Through Bore: 0.7500
from Alinabal Motion Transfer Devices
Four piece construction, oil impregnated phosphor bronze race. [See More]
- Type: Male
- Bore Diameter: 0.6250
- Design Units: Inch
- Length Through Bore: 0.7500
from Alinabal Motion Transfer Devices
Four piece construction, oil impregnated phosphor bronze race. [See More]
- Type: Male
- Bore Diameter: 0.6250
- Design Units: Inch
- Length Through Bore: 0.7500
from Alinabal Motion Transfer Devices
Four piece construction, oil impregnated phosphor bronze race. [See More]
- Type: Male
- Bore Diameter: 0.6250
- Design Units: Inch
- Length Through Bore: 0.7500
from Alinabal Motion Transfer Devices
Four piece construction, oil impregnated phosphor bronze race, with precision bore tolerance. [See More]
- Type: Male
- Bore Diameter: 0.6250
- Design Units: Inch
- Length Through Bore: 0.7500
from Alinabal Motion Transfer Devices
Four piece construction, oil impregnated phosphor bronze race, with precision bore tolerance. [See More]
- Type: Male
- Bore Diameter: 0.6250
- Design Units: Inch
- Length Through Bore: 0.7500