Stainless Steel Cartridge Heaters
from Heatron, Inc.
High altitude. High stress. High performance. The seamless metal jacket on this specialized cartridge heater is formed from a single sheet of metal, resulting in superior sheath integrity for high altitude and high stress applications. Deep drawn eliminates risk of weld failure when equipment... [See More]
- Sleeve (Sheath) Material: Stainless Steel; Incoloy®
- Heated Length: 7.5
- Nominal Diameter: 0.5000 to 0.7500
- Insulation Options: Ceramic (optional feature); Mica (optional feature); silicone, Teflon®, epoxy
from Backer Marathon, Inc.
The engineers at Backer Marathon have developed a swaged cartridge heater that exceeds the performance and durability of others in the industry. Through refinements in the swaging process, specially designed cores, careful selection of magnesium oxide fill, nickel chromium resistance wire, stainless... [See More]
- Sleeve (Sheath) Material: None; Stainless Steel
- kWatts: 0.15
- AC Voltage Required: 240
- Watt Density: 127
from WATTCO
Cartridge heaters can be considered "component heaters" that are used to generate heat in many different applications. These process heaters are primarily used in mold and fit snug inside a cavity and helps heat solids by reaching high temperatures. Cartridge heaters have the versatility of being... [See More]
- Sleeve (Sheath) Material: Nickel Alloy; Stainless Steel; Steel; Titanium
- AC Voltage Required: 120 to 240
- Maximum Operating (Sheath) Temperature: 1400
- kWatts: 0.05 to 4.70
from Tempco Electric Heater Corporation
There are two types of InLine Forced Air Heaters: LDA – outlet temperature of 1000 °F (538 °C) and Inlet air or gas temperature up to 250 °F (121 °C). HAC – Exit air or gas temperature up to 1400 °F (760 °C) and Inlet air or gas temperature up to 250 °F (121... [See More]
- Sleeve (Sheath) Material: Stainless Steel
- Nominal Diameter: 0.3750 to 0.7500
- Maximum Operating (Sheath) Temperature: 1000
- Heated Length: 5.5
from Backer Hotwatt Inc.
Features. The Hotwatt Immersion Heater may be supplied with various junction boxes for additional terminal or lead protection. For corrosive environments, units can be supplied in other special alloys best suited to the operating conditions. The lead end of the unit may be sealed for extreme... [See More]
- Sleeve (Sheath) Material: Stainless Steel
- kWatts: 0.12 to 21.00
- AC Voltage Required: 120 to 240
- Watt Density: 6 to 38
from Heatron, Inc.
Quickly and safely transfers heated liquids, gases and oils. Heatron's heat exchanger consists of a high-density cartridge heater encased in a metal jacket with ports for transfer of medium to be heated. The compact design provides higher watt density and dielectric strength compared with tubular... [See More]
- Sleeve (Sheath) Material: Stainless Steel; Incoloy®
- Heated Length: 36 to 72
- Nominal Diameter: 0.2500 to 0.7500
- Insulation Options: Ceramic (optional feature); Mica (optional feature); silicone, Teflon®, epoxy
from Tempco Electric Heater Corporation
Sheath material is 304 Stainless Steel which provides high temperature strength, good thermal conductivity and resistance to oxidation. Sheath is roll crimped over a 304 Stainless Steel end disc. This style end seal is not moisture proof. Helically wound Nickel-Chrome resistance wire is evenly... [See More]
- Sleeve (Sheath) Material: Stainless Steel
- Watt Density: 20 to 45
- Maximum Operating (Sheath) Temperature: 1200
- Nominal Diameter: 1.25 to 1.88
from Backer Hotwatt Inc.
Features. Hotwatt Precision Cartridge Heaters provide localized heat to restricted work areas requiring close thermal control. Dies, Platens, and a variety of other types of processing equipment are efficiently heated. Closely controlled work temperatures up to 1250F are obtained by a combination of... [See More]
- Sleeve (Sheath) Material: Stainless Steel
- AC Voltage Required: 120 to 240
- Maximum Operating (Sheath) Temperature: 1250
- kWatts: 0.01 to 15.50
from Heatron, Inc.
Heatron high density cartridge heating elements excel in performance and durability. Using value-added controls, specialized coatings and finishes, and optimized design, Heatron creates the right balance of performance and features to meet your specification and budget requirements. Contact Heatron... [See More]
- Sleeve (Sheath) Material: Stainless Steel; Incoloy®
- Heated Length: 36 to 72
- Nominal Diameter: 0.2500 to 0.7500
- Insulation Options: Ceramic (optional feature); Mica (optional feature); silicone, Teflon®, epoxy
from Backer Hotwatt Inc.
Features. The Hotwatt Square and Rectangular Cartridge Heater is designed to distribute maximum heat within a desired area. Because they are completely enclosed, square units will furnish more usable heat for a given wattage than a comparable strip heater attached to the exterior of a mod, platen,... [See More]
- Sleeve (Sheath) Material: Stainless Steel
- AC Voltage Required: 120 to 240
- Maximum Operating (Sheath) Temperature: 1200
- kWatts: 0.01 to 2.40
from Heatron, Inc.
Water, water-soluble and low viscosity fluid heater. Compact immersion cartridge heaters are designed for minimal assembly and ease of service in the field. With smaller fittings than tubular versions, tight spaces won't pose a problem for these high performance immersion cartridge heaters. Contact... [See More]
- Sleeve (Sheath) Material: Stainless Steel; Incoloy®
- Heated Length: 36 to 72
- Nominal Diameter: 0.2500 to 0.7500
- Insulation Options: Ceramic (optional feature); Mica (optional feature); silicone, Teflon®, epoxy
from Backer Hotwatt Inc.
Features: The Miniature Circulation Heater is a packaged heater for heating small volumes of liquids as in photographic developer solutions, chemicals, dyes and inks. Constructed of 316 series stainless steel. Pressures to 100 psig. [See More]
- Sleeve (Sheath) Material: Stainless Steel
- kWatts: 100.00 to 1200.00
- AC Voltage Required: 120 to 240
- Watt Density: 23 to 120
from Heatron, Inc.
Integrated heat sink for fast heat dispersion and longer life. Quickly diffuse heat while maintaining a lower sheath temperature in closed environments by maximizing the heater's surface area in contact with the air. Heatron's hybrid heater is ideal for fast heat dispersion using forced convection. [See More]
- Sleeve (Sheath) Material: Stainless Steel; Incoloy®
- Heated Length: 36 to 72
- Nominal Diameter: 0.2500 to 0.7500
- Insulation Options: Ceramic (optional feature); Mica (optional feature); silicone, Teflon®, epoxy
from Backer Hotwatt Inc.
Applications. Dies, Heat Sealing, Hot Melt Adhesive, Plastic Molding, Platens, Shoe Machinery. U.L. Recognized - E56973 C.S.A. Certified - 016386-0-000. Features. Elements are designed for maximum: Watt density, temperature, heat transfer, and heater life. The useful life of a cartridge heating... [See More]
- Sleeve (Sheath) Material: Stainless Steel
- AC Voltage Required: 120 to 240
- Maximum Operating (Sheath) Temperature: 1250
- kWatts: 0.03 to 5.00
from Chromalox
Seamless Sheath - No Welded End Disk. 304 or 316 Stainless Steel Sheath. Electropolished (Option). Diameters Available: 1/8", 3/8", 1/2", 5/8", 3/4" (.3175, .635, .9525, 1.27, 1.5875, 1.905 cm). Lengths Up to 10" (25.4 cm). See Chart. High Watt Densities Available [See More]
- Sleeve (Sheath) Material: Stainless Steel
- Nominal Diameter: 0.1250 to 0.7500
- AC Voltage Required: 240 to 480
- Heated Length: 2.5 to 10
from Dalton Electric Heating Co., Inc.
Watt-Flex cartridge heaters are built-to-order to meet your electric process heating application. A variety of heater modifications and accessories are available for: Lead Modifications, Lead Wire Protection and High Temperature and mounting Modifications. For nearly 100 years, Dalton Electric... [See More]
- Sleeve (Sheath) Material: Stainless Steel; Incoloy
- AC Voltage Required: 0.0 to 480
- Maximum Operating (Sheath) Temperature: 1850
- Nominal Diameter: 0.2450 to 0.9925
from OMEGA Engineering, Inc.
OMEGALUX ® C Series heavy duty cartridge heaters are especially suited for use in applications involving hot plates, molds, dies, platens and container heating. Type CTRH is an extra high-quality cartridge heater. It is available in 0.553 and 0.663" diameter, sheath lengths up to 41/2 feet, and... [See More]
- Sleeve (Sheath) Material: Stainless Steel
- AC Voltage Required: 120 to 240
- Maximum Operating (Sheath) Temperature: 600
- Watt Density: 18 to 33
from Chromalox
0.553 and 0.66" Dia. 1,670 - 5,130 Watts. 120, 208, 240 and 480 Volt. 50 and 55 W/In ². 304 Stainless Steel Sheath [See More]
- Sleeve (Sheath) Material: Stainless Steel
- AC Voltage Required: 120 to 480
- Maximum Operating (Sheath) Temperature: 800
- kWatts: 1.67 to 5.13
from OMEGA Engineering, Inc.
OMEGALUX ® CS series cartridge heaters provide high wattage in limited spaces. They are manufactured with 300 series stainless steel sheaths to precise dimensions and tolerances to ensure maximum heat transfer for minimum core temperature and faster heating. The CSS series cartridge heaters... [See More]
- Sleeve (Sheath) Material: Stainless Steel
- AC Voltage Required: 120 to 240
- Maximum Operating (Sheath) Temperature: 1250
- Watt Density: 21 to 210