2.5 V Flip-Flops
from Rochester Electronics
SN74ALVTH16374 2.5-V/3.3-V 16-Bit Edge-Triggered D-Type Flip-Flops With 3-State Outputs [See More]
- Supply Voltage: 2.5V; 3.3V
- Package Type: BGA MICROSTAR JUNIOR-56; BGA
- Output Characteristics: 3-State
from Nexperia B.V.
The 74LVCH162374A is a 16 - bit edge triggered flip - flop featuring separate D - type inputs for each flip - flop and 3 - state outputs for bus - oriented applications. The device consists of two... [See More]
- Supply Voltage: 1.2V; 1.5V; 1.8V; 2.5V; 3V; 3.3V; 3.6V; 1.2 - 3.6
- Output Characteristics: 3-State
- Flip-Flop Type: D
- Features: ESD Protection
from Texas Instruments
16-Bit Edge-Triggered D-Type Flip-Flop With 3-State Outputs 48-SSOP -40 to 85 [See More]
- Supply Voltage: 1.8V; 2.5V; 3.3V; 3.6V; 1.8,2.5,2.7,3.3
- Output Characteristics: 3-State
- Flip-Flop Type: D
- Propagation Delay: 5.4
from Nexperia B.V.
The 74ALVT162823 is an 18-bit positive-edge triggered D-type flip-flop with 30 Ω termination resistors, 3-state outputs reset and enable. The device can be used as two 9-bit flip-flops or one 18-bit flip-flop. The device features clock (nCP), clock enable (nCE), master reset (nMR) and output... [See More]
- Supply Voltage: 2.5V; 3V; 3.3V; 3.6V; 2.3 - 3.6
- Output Characteristics: 3-State; OE
- Flip-Flop Type: D
- Features: ESD Protection
from Texas Instruments
3.3-V 20-Bit Flip-Flop With 3-State Outputs 56-TSSOP -40 to 85 [See More]
- Supply Voltage: 1.8V; 2.5V; 3.3V; 3.6V; 1.8,2.5,2.7,3.3
- Propagation Delay: 6.7
- Output Characteristics: 3-State
- fMAX: 150
from Nexperia B.V.
The 74HC74 and 74HCT74 are dual positive edge triggered D-type flip-flop. They have individual data (nD), clock (nCP), set (nSD) and reset (nRD) inputs, and complementary nQ and nQ outputs. Data at the nD-input, that meets the set-up and hold time requirements on the LOW-to-HIGH clock transition, is... [See More]
- Supply Voltage: 2.5V; 3V; 3.3V; 3.6V; 5V; 2.0 - 6.0
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Propagation Delay: 14
from Texas Instruments
16-Bit Edge-Triggered D-Type Flip-Flop With 3-State Outputs 48-TSSOP -40 to 85 [See More]
- Supply Voltage: 1.8V; 2.5V; 3.3V; 3.6V; 1.8,2.5,2.7,3.3
- Output Characteristics: 3-State
- Flip-Flop Type: D
- Propagation Delay: 5.3
from Nexperia B.V.
The 74HC74 and 74HCT74 are dual positive edge triggered D-type flip-flop. They have individual data (nD), clock (nCP), set (nSD) and reset (nRD) inputs, and complementary nQ and nQ outputs. Data at the nD-input, that meets the set-up and hold time requirements on the LOW-to-HIGH clock transition, is... [See More]
- Supply Voltage: 2.5V; 3V; 3.3V; 3.6V; 5V; 2.0 - 6.0
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Propagation Delay: 14
from Texas Instruments
3.3-V 20-Bit Flip-Flop With 3-State Outputs 56-TSSOP -40 to 85 [See More]
- Supply Voltage: 1.8V; 2.5V; 3.3V; 3.6V; 1.8,2.5,2.7,3.3
- Propagation Delay: 5.6
- Output Characteristics: 3-State
- fMAX: 150
from Nexperia B.V.
The 74HC74 and 74HCT74 are dual positive edge triggered D-type flip-flop. They have individual data (nD), clock (nCP), set (nSD) and reset (nRD) inputs, and complementary nQ and nQ outputs. Data at the nD-input, that meets the set-up and hold time requirements on the LOW-to-HIGH clock transition, is... [See More]
- Supply Voltage: 2.5V; 3V; 3.3V; 3.6V; 5V; 2.0 - 6.0
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Propagation Delay: 14
from Texas Instruments
3.3-V 10-Bit Flip-Flop with Dual Outputs and 3-State Outputs 56-TSSOP -40 to 85 [See More]
- Supply Voltage: 1.8V; 2.5V; 3.3V; 3.6V; 1.8,2.5,2.7,3.3
- Propagation Delay: 5.9
- Output Characteristics: 3-State
- fMAX: 150
from Nexperia B.V.
The 74AHC74; 74AHCT74 is a high-speed Si-gate CMOS device and is pin compatible with Low - Power Schottky TTL (LSTTL). It is specified in compliance with JEDEC standard No. 7-A. The 74AHC74; 74AHCT74 is a dual positive-edge triggered, D-type flip-flop with individual data inputs (D),... [See More]
- Supply Voltage: 2.5V; 3V; 3.3V; 3.6V; 5V; 2.0 - 5.5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Features: ESD Protection
from Texas Instruments
3.3-V 20-Bit Bus-Interface Flip-Flop with 3-State Outputs 56-TSSOP -40 to 85 [See More]
- Supply Voltage: 1.8V; 2.5V; 3.3V; 3.6V; 1.8,2.5,2.7,3.3
- Propagation Delay: 5.8
- Output Characteristics: 3-State
- fMAX: 150
from Nexperia B.V.
The 74HC112; 74HCT112 is a dual negative-edge triggered JK flip-flop. It features individual J and K inputs, clock (nCP) set (nSD) and reset (nRD) inputs. It also has complementary nQ and nQ outputs. The set and reset are asynchronous active LOW inputs and operate independently of the clock input. [See More]
- Supply Voltage: 2.5V; 3V; 3.3V; 3.6V; 5V; 2.0 - 6.0
- Triggering: Negative-edge Triggered
- Flip-Flop Type: J-K
- Features: ESD Protection
from Texas Instruments
18-Bit Bus-Interface Flip-Flop With 3-State Outputs 56-TSSOP -40 to 85 [See More]
- Supply Voltage: 1.8V; 2.5V; 3.3V; 3.6V; 1.8,2.5,2.7,3.3
- Propagation Delay: 5.8
- Output Characteristics: 3-State
- fMAX: 150
from Nexperia B.V.
The 74HC112; 74HCT112 is a dual negative-edge triggered JK flip-flop. It features individual J and K inputs, clock (nCP) set (nSD) and reset (nRD) inputs. It also has complementary nQ and nQ outputs. The set and reset are asynchronous active LOW inputs and operate independently of the clock input. [See More]
- Supply Voltage: 2.5V; 3V; 3.3V; 3.6V; 5V; 2.0 - 6.0
- Triggering: Negative-edge Triggered
- Flip-Flop Type: J-K
- Features: ESD Protection
from Texas Instruments
Octal Positive-Edge-Triggered D-Type Flip-Flop With 3-State Outputs 20-TVSOP -40 to 85 [See More]
- Supply Voltage: 1.8V; 2.5V; 3.3V; 3.6V; 1.8,2.5,2.7,3.3
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Output Characteristics: 3-State
from Nexperia B.V.
The 74LVC574A is an 8 - bit positive - edge triggered D - type flip - flop with 3 - state outputs. The device features a clock (CP) and output enable (OE) inputs. The flip - flops will store the state of... [See More]
- Supply Voltage: 1.2V; 1.5V; 1.8V; 2.5V; 3V; 3.3V; 3.6V; 1.2 - 3.6
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Output Characteristics: 3-State
from Texas Instruments
2.5-V/3.3-V 16-Bit Edge-Triggered D-Type Flip-Flops With 3-State Outputs 56-BGA MICROSTAR JUNIOR -40 to 85 [See More]
- Supply Voltage: 2.5V; 3.3V; 3.6V; 2.5,3.3
- Output Characteristics: 3-State
- Flip-Flop Type: D
- Propagation Delay: 3.8
from Nexperia B.V.
The 74LVC574A is an 8 - bit positive - edge triggered D - type flip - flop with 3 - state outputs. The device features a clock (CP) and output enable (OE) inputs. The flip - flops will store the state of... [See More]
- Supply Voltage: 1.2V; 1.5V; 1.8V; 2.5V; 3V; 3.3V; 3.6V; 1.2 - 3.6
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Output Characteristics: 3-State
from Texas Instruments
2.5-V/3.3-V 20-Bit Bus-Interface Flip-Flops With 3-State Outputs 56-SSOP -40 to 85 [See More]
- Supply Voltage: 2.5V; 3.3V; 3.6V; 2.5,3.3
- Propagation Delay: 4.1
- Output Characteristics: 3-State
- fMAX: 250
from Nexperia B.V.
The 74LVC574A is an 8 - bit positive - edge triggered D - type flip - flop with 3 - state outputs. The device features a clock (CP) and output enable (OE) inputs. The flip - flops will store the state of... [See More]
- Supply Voltage: 1.2V; 1.5V; 1.8V; 2.5V; 3V; 3.3V; 3.6V; 1.2 - 3.6
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Output Characteristics: 3-State
from Texas Instruments
16-Bit Edge-Triggered D-Type Flip-Flop With 3-State Outputs 48-TSSOP -40 to 85 [See More]
- Supply Voltage: 1.2V; 1.5V; 1.8V; 2.5V; 0.8,1.2,1.5,1.8,2.5
- Output Characteristics: 3-State
- Flip-Flop Type: D
- Propagation Delay: 7.3
from Nexperia B.V.
The 74LVC1G175 is a low-power, low-voltage single positive edge triggered D-type flip-flop with individual data (D) input, clock (CP) input, master reset (MR) input, and Q output. The master reset (MR) is an asynchronous active LOW input and operates independently of the clock input. Information on... [See More]
- Supply Voltage: 1.8V; 2.5V; 3V; 3.3V; 3.6V; 5V; 1.65 - 5.5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Features: ESD Protection
from Texas Instruments
Single Positive-Edge-Triggered D-Type Flip-Flop with Clear and Preset 8-SM8 -40 to 85 [See More]
- Supply Voltage: 1.2V; 1.5V; 1.8V; 2.5V; 0.8,1.2,1.5,1.8,2.5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Propagation Delay: 9.6
from Nexperia B.V.
The 74LVC1G175 is a low-power, low-voltage single positive edge triggered D-type flip-flop with individual data (D) input, clock (CP) input, master reset (MR) input, and Q output. The master reset (MR) is an asynchronous active LOW input and operates independently of the clock input. Information on... [See More]
- Supply Voltage: 1.8V; 2.5V; 3V; 3.3V; 3.6V; 5V; 1.65 - 5.5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Features: ESD Protection
from Texas Instruments
Single Positive-Edge-Triggered D-Type Flip-Flop 5-SOT-23 -40 to 85 [See More]
- Supply Voltage: 1.2V; 1.5V; 1.8V; 2.5V; 0.8,1.2,1.5,1.8,2.5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Propagation Delay: 5
from Nexperia B.V.
The 74LVC1G175 is a low-power, low-voltage single positive edge triggered D-type flip-flop with individual data (D) input, clock (CP) input, master reset (MR) input, and Q output. The master reset (MR) is an asynchronous active LOW input and operates independently of the clock input. Information on... [See More]
- Supply Voltage: 1.8V; 2.5V; 3V; 3.3V; 3.6V; 5V; 1.65 - 5.5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Features: ESD Protection
from Texas Instruments
Single Positive-Edge-Triggered D-Type Flip-Flop 5-SOT-23 -40 to 85 [See More]
- Supply Voltage: 1.2V; 1.5V; 1.8V; 2.5V; 0.8,1.2,1.5,1.8,2.5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Propagation Delay: 5
from Nexperia B.V.
The 74LVC1G175 is a low-power, low-voltage single positive edge triggered D-type flip-flop with individual data (D) input, clock (CP) input, master reset (MR) input, and Q output. The master reset (MR) is an asynchronous active LOW input and operates independently of the clock input. Information on... [See More]
- Supply Voltage: 1.8V; 2.5V; 3V; 3.3V; 3.6V; 5V; 1.65 - 5.5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Features: ESD Protection
from Texas Instruments
Dual Positive-Edge-Triggered D-Type Flip-Flop 8-SM8 -40 to 85 [See More]
- Supply Voltage: 1.2V; 1.5V; 1.8V; 2.5V; 0.8,1.2,1.5,1.8,2.5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Propagation Delay: 5
from Nexperia B.V.
The 74LVC1G175 is a low-power, low-voltage single positive edge triggered D-type flip-flop with individual data (D) input, clock (CP) input, master reset (MR) input, and Q output. The master reset (MR) is an asynchronous active LOW input and operates independently of the clock input. Information on... [See More]
- Supply Voltage: 1.8V; 2.5V; 3V; 3.3V; 3.6V; 5V; 1.65 - 5.5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Features: ESD Protection
from Texas Instruments
Dual Positive-Edge-Triggered D-Type Flip-Flop 8-SM8 -40 to 85 [See More]
- Supply Voltage: 1.2V; 1.5V; 1.8V; 2.5V; 0.8,1.2,1.5,1.8,2.5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Propagation Delay: 5
from Nexperia B.V.
The 74LVC1G74 is a single positive edge triggered D-type flip-flop with individual data (D), clock (CP), set (SD) and reset (RD) inputs, and complementary Q and Q outputs. Data at the D-input that meets the set-up and hold time requirements on the LOW-to-HIGH clock transition will be stored in the... [See More]
- Supply Voltage: 1.8V; 2.5V; 3V; 3.3V; 3.6V; 5V; 1.65 - 5.5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Features: ESD Protection
from Texas Instruments
Dual Positive-Edge-Triggered D-Type Flip-Flops with Clear and Preset 14-VQFN -40 to 85 [See More]
- Supply Voltage: 1.2V; 1.5V; 1.8V; 2.5V; 0.8,1.2,1.5,1.8,2.5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Propagation Delay: 9.5
from Nexperia B.V.
The 74LVC1G74 is a single positive edge triggered D-type flip-flop with individual data (D), clock (CP), set (SD) and reset (RD) inputs, and complementary Q and Q outputs. Data at the D-input that meets the set-up and hold time requirements on the LOW-to-HIGH clock transition will be stored in the... [See More]
- Supply Voltage: 1.8V; 2.5V; 3V; 3.3V; 3.6V; 5V; 1.65 - 5.5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Features: ESD Protection
from Texas Instruments
16-Bit Edge-Triggered D-Type Flip-Flop With 3-State Outputs 48-TSSOP -40 to 85 [See More]
- Supply Voltage: 1.2V; 1.5V; 1.8V; 2.5V; 0.8,1.2,1.5,1.8,2.5
- Output Characteristics: 3-State
- Flip-Flop Type: D
- Propagation Delay: 7.3
from Nexperia B.V.
The 74LVC1G74 is a single positive edge triggered D-type flip-flop with individual data (D), clock (CP), set (SD) and reset (RD) inputs, and complementary Q and Q outputs. Data at the D-input that meets the set-up and hold time requirements on the LOW-to-HIGH clock transition will be stored in the... [See More]
- Supply Voltage: 1.8V; 2.5V; 3V; 3.3V; 3.6V; 5V; 1.65 - 5.5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Features: ESD Protection
from Texas Instruments
32-BIT EDGE-TRIGGERED D-TYPE FLIP-FLOP WITH 3-STATE OUTPUTS 96-LFBGA -40 to 85 [See More]
- Supply Voltage: 1.2V; 1.5V; 1.8V; 2.5V; 0.8,1.2,1.5,1.8,2.5
- Output Characteristics: 3-State
- Flip-Flop Type: D
- Propagation Delay: 7.3
from Nexperia B.V.
The 74LVC1G74 is a single positive edge triggered D-type flip-flop with individual data (D), clock (CP), set (SD) and reset (RD) inputs, and complementary Q and Q outputs. Data at the D-input that meets the set-up and hold time requirements on the LOW-to-HIGH clock transition will be stored in the... [See More]
- Supply Voltage: 1.8V; 2.5V; 3V; 3.3V; 3.6V; 5V; 1.65 - 5.5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Features: ESD Protection
from Texas Instruments
Low-Power Single Positive-Edge-Triggered D-Type Flip-Flop 8-US8 -40 to 85 [See More]
- Supply Voltage: 1.2V; 1.5V; 1.8V; 2.5V; 3.3V; 3.6V; 0.8,1.2,1.5,1.8,2.5,3.3
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Propagation Delay: 38
from Nexperia B.V.
The 74LVC1G74 is a single positive edge triggered D-type flip-flop with individual data (D), clock (CP), set (SD) and reset (RD) inputs, and complementary Q and Q outputs. Data at the D-input that meets the set-up and hold time requirements on the LOW-to-HIGH clock transition will be stored in the... [See More]
- Supply Voltage: 1.8V; 2.5V; 3V; 3.3V; 3.6V; 5V; 1.65 - 5.5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Features: ESD Protection
from Texas Instruments
Low-Power Single Positive-Edge-Triggered D-Type Flip-Flop 5-SOT-23 -40 to 85 [See More]
- Supply Voltage: 1.2V; 1.5V; 1.8V; 2.5V; 3.3V; 3.6V; 0.8,1.2,1.5,1.8,2.5,3.3
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Propagation Delay: 27.2
from Nexperia B.V.
The 74AHC1G79; 74AHCT1G79 is a single positive-edge triggered D - type flip-flop. Data at the D - input that meets the set-up and hold time requirements on the LOW-to-HIGH clock transition will be stored in the flip-flop and appear at the Q output. Inputs are... [See More]
- Supply Voltage: 2.5V; 3V; 3.3V; 3.6V; 5V; 2.0 - 5.5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Features: ESD Protection
from Texas Instruments
Low-Power Single Postitive-Edge-Triggered D-Type Flip-Flop 5-SOT-23 -40 to 85 [See More]
- Supply Voltage: 1.2V; 1.5V; 1.8V; 2.5V; 3.3V; 3.6V; 0.8,1.2,1.5,1.8,2.5,3.3
- Propagation Delay: 28.4
- Flip-Flop Type: D
- fMAX: 100
from Nexperia B.V.
The 74AHC1G79; 74AHCT1G79 is a single positive-edge triggered D - type flip-flop. Data at the D - input that meets the set-up and hold time requirements on the LOW-to-HIGH clock transition will be stored in the flip-flop and appear at the Q output. Inputs are... [See More]
- Supply Voltage: 2.5V; 3V; 3.3V; 3.6V; 5V; 2.0 - 5.5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Features: ESD Protection
from Texas Instruments
Low-Power Dual Positive-Edge-Triggered D-Type Flip-Flop 8-US8 -40 to 85 [See More]
- Supply Voltage: 1.2V; 1.5V; 1.8V; 2.5V; 3.3V; 3.6V; 0.8,1.2,1.5,1.8,2.5,3.3
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Propagation Delay: 27.2
from Nexperia B.V.
The 74LVC1G79 is a single positive-edge triggered D-type flip-flop. Data at the D-input that meets the set-up and hold time requirements on the LOW-to-HIGH clock transition will be stored in the flip-flop and appear at the Q output. Inputs can be driven from either 3.3 V or 5 V devices. This feature... [See More]
- Supply Voltage: 1.8V; 2.5V; 3V; 3.3V; 3.6V; 5V; 1.65 - 5.5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Features: ESD Protection
from Texas Instruments
Low-Power Dual Positive-Edge-Triggered D-Type Flip-Flop 8-US8 -40 to 85 [See More]
- Supply Voltage: 1.2V; 1.5V; 1.8V; 2.5V; 3.3V; 3.6V; 0.8,1.2,1.5,1.8,2.5,3.3
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Propagation Delay: 28.4
from Nexperia B.V.
The 74LVC1G79 is a single positive-edge triggered D-type flip-flop. Data at the D-input that meets the set-up and hold time requirements on the LOW-to-HIGH clock transition will be stored in the flip-flop and appear at the Q output. Inputs can be driven from either 3.3 V or 5 V devices. This feature... [See More]
- Supply Voltage: 1.8V; 2.5V; 3V; 3.3V; 3.6V; 5V; 1.65 - 5.5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Features: ESD Protection
from Texas Instruments
16-Bit Edge-Triggered D-Type Flip-Flop With 3-State Outputs 48-TSSOP -40 to 85 [See More]
- Supply Voltage: 1.2V; 1.5V; 1.8V; 2.5V; 3.3V; 3.6V; 1.2,1.5,1.8,2.5,3.3
- Output Characteristics: 3-State
- Flip-Flop Type: D
- Propagation Delay: 8.4