3.6V Flip-Flops
from Nexperia B.V.
The 74LVCH162374A is a 16 - bit edge triggered flip - flop featuring separate D - type inputs for each flip - flop and 3 - state outputs for bus - oriented applications. The device consists of two... [See More]
- Supply Voltage: 1.2V; 1.5V; 1.8V; 2.5V; 3V; 3.3V; 3.6V; 1.2 - 3.6
- Output Characteristics: 3-State
- Flip-Flop Type: D
- Features: ESD Protection
from Texas Instruments
OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS WITH 3-STATE OUTPUTS 20-LCCC -55 to 125 [See More]
- Supply Voltage: 3.3V; 3.6V; 2.7,3.3
- Output Characteristics: 3-State
- Flip-Flop Type: D
- Propagation Delay: 9.5
from Nexperia B.V.
The 74ALVT162823 is an 18-bit positive-edge triggered D-type flip-flop with 30 Ω termination resistors, 3-state outputs reset and enable. The device can be used as two 9-bit flip-flops or one 18-bit flip-flop. The device features clock (nCP), clock enable (nCE), master reset (nMR) and output... [See More]
- Supply Voltage: 2.5V; 3V; 3.3V; 3.6V; 2.3 - 3.6
- Output Characteristics: 3-State; OE
- Flip-Flop Type: D
- Features: ESD Protection
from Texas Instruments
OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS WITH 3-STATE OUTPUTS 20-LCCC -55 to 125 [See More]
- Supply Voltage: 3.3V; 3.6V; 2.7,3.3
- Output Characteristics: 3-State
- Flip-Flop Type: D
- Propagation Delay: 8
from Nexperia B.V.
The HEF4013B is a dual D-type flip-flop with set and reset; positive-edge trigger. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VDD. Schmitt-trigger action on the clock input makes the circuit highly tolerant of slower... [See More]
- Supply Voltage: 3V; 3.3V; 3.6V; 5V; 3.0 - 15
- Features: ESD Protection
- Flip-Flop Type: D
- Propagation Delay: 30
from Texas Instruments
DUAL POSITIVE-EDGE-TRIGGERED D-TYPE FLIP-FLOPS WITH CLEAR AND PRESET 20-LCCC -55 to 125 [See More]
- Supply Voltage: 3.3V; 3.6V; 2.7,3.3
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Propagation Delay: 6
from Nexperia B.V.
The HEF4013B is a dual D-type flip-flop with set and reset; positive-edge trigger. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VDD. Schmitt-trigger action on the clock input makes the circuit highly tolerant of slower... [See More]
- Supply Voltage: 3V; 3.3V; 3.6V; 5V; 3.0 - 15
- Features: ESD Protection
- Flip-Flop Type: D
- Propagation Delay: 30
from Texas Instruments
DUAL POSITIVE-EDGE-TRIGGERED D-TYPE FLIP-FLOPS WITH CLEAR AND PRESET 20-LCCC -55 to 125 [See More]
- Supply Voltage: 3.3V; 3.6V; 2.7,3.3
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Propagation Delay: 6
from Nexperia B.V.
The 74HC74 and 74HCT74 are dual positive edge triggered D-type flip-flop. They have individual data (nD), clock (nCP), set (nSD) and reset (nRD) inputs, and complementary nQ and nQ outputs. Data at the nD-input, that meets the set-up and hold time requirements on the LOW-to-HIGH clock transition, is... [See More]
- Supply Voltage: 2.5V; 3V; 3.3V; 3.6V; 5V; 2.0 - 6.0
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Propagation Delay: 14
from Texas Instruments
3.3-V ABT 16-Bit Edge-Triggered D-type Flip-Flops With 3-State Outputs 48-CFP -55 to 125 [See More]
- Supply Voltage: 3.6V
- Output Characteristics: 3-State
- Flip-Flop Type: D
- Propagation Delay: 5.3
from Nexperia B.V.
The 74AHC74; 74AHCT74 is a high-speed Si-gate CMOS device and is pin compatible with Low - Power Schottky TTL (LSTTL). It is specified in compliance with JEDEC standard No. 7-A. The 74AHC74; 74AHCT74 is a dual positive-edge triggered, D-type flip-flop with individual data inputs (D),... [See More]
- Supply Voltage: 2.5V; 3V; 3.3V; 3.6V; 5V; 2.0 - 5.5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Features: ESD Protection
from Texas Instruments
3.3-V ABT 16-Bit Edge-Triggered D-type Flip-Flops With 3-State Outputs 48-CFP -55 to 125 [See More]
- Supply Voltage: 3.6V
- Output Characteristics: 3-State
- Flip-Flop Type: D
- Propagation Delay: 5.3
from Nexperia B.V.
The HEF4027B is a dual positive-edge triggered JK flip-flop featuring independent set direct (nSD), clear direct (nCD), clock inputs (nCP) and complementary outputs (nQ and nQ). Data is accepted when nCP is LOW, and transferred to the output on the positive-going edge of the clock. The asynchronous... [See More]
- Supply Voltage: 3V; 3.3V; 3.6V; 5V; 3.0 - 15
- Features: ESD Protection
- Flip-Flop Type: J-K
- Propagation Delay: 30
from Texas Instruments
3.3-V ABT 16-Bit Edge-Triggered D-type Flip-Flops With 3-State Outputs 48-CFP -55 to 125 [See More]
- Supply Voltage: 3.6V
- Output Characteristics: 3-State
- Flip-Flop Type: D
- Propagation Delay: 4.5
from Nexperia B.V.
The 74HC112; 74HCT112 is a dual negative-edge triggered JK flip-flop. It features individual J and K inputs, clock (nCP) set (nSD) and reset (nRD) inputs. It also has complementary nQ and nQ outputs. The set and reset are asynchronous active LOW inputs and operate independently of the clock input. [See More]
- Supply Voltage: 2.5V; 3V; 3.3V; 3.6V; 5V; 2.0 - 6.0
- Triggering: Negative-edge Triggered
- Flip-Flop Type: J-K
- Features: ESD Protection
from Texas Instruments
Octal Edge-Triggered D-type Flip-Flops With 3-State Outputs 20-LCCC -55 to 125 [See More]
- Supply Voltage: 3.6V
- Output Characteristics: 3-State
- Flip-Flop Type: D
- Propagation Delay: 4.5
from Nexperia B.V.
The 74LVC574A is an 8 - bit positive - edge triggered D - type flip - flop with 3 - state outputs. The device features a clock (CP) and output enable (OE) inputs. The flip - flops will store the state of... [See More]
- Supply Voltage: 1.2V; 1.5V; 1.8V; 2.5V; 3V; 3.3V; 3.6V; 1.2 - 3.6
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Output Characteristics: 3-State
from Texas Instruments
3.3-V ABT Octal Edge-Triggered D-type Flip-Flops With 3-State Outputs 20-LCCC -55 to 125 [See More]
- Supply Voltage: 3.6V
- Output Characteristics: 3-State
- Flip-Flop Type: D
- Propagation Delay: 4.5
from Nexperia B.V.
The 74LVC574A is an 8 - bit positive - edge triggered D - type flip - flop with 3 - state outputs. The device features a clock (CP) and output enable (OE) inputs. The flip - flops will store the state of... [See More]
- Supply Voltage: 1.2V; 1.5V; 1.8V; 2.5V; 3V; 3.3V; 3.6V; 1.2 - 3.6
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Output Characteristics: 3-State
from Texas Instruments
3.3-V ABT Octal Edge-Triggered D-type Flip-Flops With 3-State Outputs 20-CDIP -55 to 125 [See More]
- Supply Voltage: 3.6V
- Output Characteristics: 3-State
- Flip-Flop Type: D
- Propagation Delay: 4.5
from Nexperia B.V.
The 74LVC574A is an 8 - bit positive - edge triggered D - type flip - flop with 3 - state outputs. The device features a clock (CP) and output enable (OE) inputs. The flip - flops will store the state of... [See More]
- Supply Voltage: 1.2V; 1.5V; 1.8V; 2.5V; 3V; 3.3V; 3.6V; 1.2 - 3.6
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Output Characteristics: 3-State
from Texas Instruments
16-Bit Edge-Triggered D-Type Flip-Flop With 3-State Outputs 48-SSOP -40 to 85 [See More]
- Supply Voltage: 1.8V; 2.5V; 3.3V; 3.6V; 1.8,2.5,2.7,3.3
- Output Characteristics: 3-State
- Flip-Flop Type: D
- Propagation Delay: 5.4
from Nexperia B.V.
The 74LVC1G175 is a low-power, low-voltage single positive edge triggered D-type flip-flop with individual data (D) input, clock (CP) input, master reset (MR) input, and Q output. The master reset (MR) is an asynchronous active LOW input and operates independently of the clock input. Information on... [See More]
- Supply Voltage: 1.8V; 2.5V; 3V; 3.3V; 3.6V; 5V; 1.65 - 5.5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Features: ESD Protection
from Texas Instruments
3.3-V 20-Bit Flip-Flop With 3-State Outputs 56-TSSOP -40 to 85 [See More]
- Supply Voltage: 1.8V; 2.5V; 3.3V; 3.6V; 1.8,2.5,2.7,3.3
- Propagation Delay: 6.7
- Output Characteristics: 3-State
- fMAX: 150
from Nexperia B.V.
The 74LVC1G175 is a low-power, low-voltage single positive edge triggered D-type flip-flop with individual data (D) input, clock (CP) input, master reset (MR) input, and Q output. The master reset (MR) is an asynchronous active LOW input and operates independently of the clock input. Information on... [See More]
- Supply Voltage: 1.8V; 2.5V; 3V; 3.3V; 3.6V; 5V; 1.65 - 5.5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Features: ESD Protection
from Texas Instruments
16-Bit Edge-Triggered D-Type Flip-Flop With 3-State Outputs 48-TSSOP -40 to 85 [See More]
- Supply Voltage: 1.8V; 2.5V; 3.3V; 3.6V; 1.8,2.5,2.7,3.3
- Output Characteristics: 3-State
- Flip-Flop Type: D
- Propagation Delay: 5.3
from Nexperia B.V.
The 74LVC1G175 is a low-power, low-voltage single positive edge triggered D-type flip-flop with individual data (D) input, clock (CP) input, master reset (MR) input, and Q output. The master reset (MR) is an asynchronous active LOW input and operates independently of the clock input. Information on... [See More]
- Supply Voltage: 1.8V; 2.5V; 3V; 3.3V; 3.6V; 5V; 1.65 - 5.5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Features: ESD Protection
from Texas Instruments
3.3-V 20-Bit Flip-Flop With 3-State Outputs 56-TSSOP -40 to 85 [See More]
- Supply Voltage: 1.8V; 2.5V; 3.3V; 3.6V; 1.8,2.5,2.7,3.3
- Propagation Delay: 5.6
- Output Characteristics: 3-State
- fMAX: 150
from Nexperia B.V.
The 74LVC1G175 is a low-power, low-voltage single positive edge triggered D-type flip-flop with individual data (D) input, clock (CP) input, master reset (MR) input, and Q output. The master reset (MR) is an asynchronous active LOW input and operates independently of the clock input. Information on... [See More]
- Supply Voltage: 1.8V; 2.5V; 3V; 3.3V; 3.6V; 5V; 1.65 - 5.5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Features: ESD Protection
from Texas Instruments
3.3-V 10-Bit Flip-Flop with Dual Outputs and 3-State Outputs 56-TSSOP -40 to 85 [See More]
- Supply Voltage: 1.8V; 2.5V; 3.3V; 3.6V; 1.8,2.5,2.7,3.3
- Propagation Delay: 5.9
- Output Characteristics: 3-State
- fMAX: 150
from Nexperia B.V.
The 74LVC1G175 is a low-power, low-voltage single positive edge triggered D-type flip-flop with individual data (D) input, clock (CP) input, master reset (MR) input, and Q output. The master reset (MR) is an asynchronous active LOW input and operates independently of the clock input. Information on... [See More]
- Supply Voltage: 1.8V; 2.5V; 3V; 3.3V; 3.6V; 5V; 1.65 - 5.5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Features: ESD Protection
from Texas Instruments
3.3-V 20-Bit Bus-Interface Flip-Flop with 3-State Outputs 56-TSSOP -40 to 85 [See More]
- Supply Voltage: 1.8V; 2.5V; 3.3V; 3.6V; 1.8,2.5,2.7,3.3
- Propagation Delay: 5.8
- Output Characteristics: 3-State
- fMAX: 150
from Nexperia B.V.
The 74LVC1G74 is a single positive edge triggered D-type flip-flop with individual data (D), clock (CP), set (SD) and reset (RD) inputs, and complementary Q and Q outputs. Data at the D-input that meets the set-up and hold time requirements on the LOW-to-HIGH clock transition will be stored in the... [See More]
- Supply Voltage: 1.8V; 2.5V; 3V; 3.3V; 3.6V; 5V; 1.65 - 5.5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Features: ESD Protection
from Texas Instruments
18-Bit Bus-Interface Flip-Flop With 3-State Outputs 56-TSSOP -40 to 85 [See More]
- Supply Voltage: 1.8V; 2.5V; 3.3V; 3.6V; 1.8,2.5,2.7,3.3
- Propagation Delay: 5.8
- Output Characteristics: 3-State
- fMAX: 150
from Nexperia B.V.
The 74LVC1G74 is a single positive edge triggered D-type flip-flop with individual data (D), clock (CP), set (SD) and reset (RD) inputs, and complementary Q and Q outputs. Data at the D-input that meets the set-up and hold time requirements on the LOW-to-HIGH clock transition will be stored in the... [See More]
- Supply Voltage: 1.8V; 2.5V; 3V; 3.3V; 3.6V; 5V; 1.65 - 5.5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Features: ESD Protection
from Texas Instruments
Octal Positive-Edge-Triggered D-Type Flip-Flop With 3-State Outputs 20-TVSOP -40 to 85 [See More]
- Supply Voltage: 1.8V; 2.5V; 3.3V; 3.6V; 1.8,2.5,2.7,3.3
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Output Characteristics: 3-State
from Nexperia B.V.
The 74LVC1G74 is a single positive edge triggered D-type flip-flop with individual data (D), clock (CP), set (SD) and reset (RD) inputs, and complementary Q and Q outputs. Data at the D-input that meets the set-up and hold time requirements on the LOW-to-HIGH clock transition will be stored in the... [See More]
- Supply Voltage: 1.8V; 2.5V; 3V; 3.3V; 3.6V; 5V; 1.65 - 5.5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Features: ESD Protection
from Texas Instruments
2.5-V/3.3-V 16-Bit Edge-Triggered D-Type Flip-Flops With 3-State Outputs 56-BGA MICROSTAR JUNIOR -40 to 85 [See More]
- Supply Voltage: 2.5V; 3.3V; 3.6V; 2.5,3.3
- Output Characteristics: 3-State
- Flip-Flop Type: D
- Propagation Delay: 3.8
from Nexperia B.V.
The 74LVC1G74 is a single positive edge triggered D-type flip-flop with individual data (D), clock (CP), set (SD) and reset (RD) inputs, and complementary Q and Q outputs. Data at the D-input that meets the set-up and hold time requirements on the LOW-to-HIGH clock transition will be stored in the... [See More]
- Supply Voltage: 1.8V; 2.5V; 3V; 3.3V; 3.6V; 5V; 1.65 - 5.5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Features: ESD Protection
from Texas Instruments
2.5-V/3.3-V 20-Bit Bus-Interface Flip-Flops With 3-State Outputs 56-SSOP -40 to 85 [See More]
- Supply Voltage: 2.5V; 3.3V; 3.6V; 2.5,3.3
- Propagation Delay: 4.1
- Output Characteristics: 3-State
- fMAX: 250
from Nexperia B.V.
The 74LVC1G74 is a single positive edge triggered D-type flip-flop with individual data (D), clock (CP), set (SD) and reset (RD) inputs, and complementary Q and Q outputs. Data at the D-input that meets the set-up and hold time requirements on the LOW-to-HIGH clock transition will be stored in the... [See More]
- Supply Voltage: 1.8V; 2.5V; 3V; 3.3V; 3.6V; 5V; 1.65 - 5.5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Features: ESD Protection
from Texas Instruments
Low-Power Single Positive-Edge-Triggered D-Type Flip-Flop 8-US8 -40 to 85 [See More]
- Supply Voltage: 1.2V; 1.5V; 1.8V; 2.5V; 3.3V; 3.6V; 0.8,1.2,1.5,1.8,2.5,3.3
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Propagation Delay: 38
from Nexperia B.V.
The 74AHC1G79; 74AHCT1G79 is a single positive-edge triggered D - type flip-flop. Data at the D - input that meets the set-up and hold time requirements on the LOW-to-HIGH clock transition will be stored in the flip-flop and appear at the Q output. Inputs are... [See More]
- Supply Voltage: 2.5V; 3V; 3.3V; 3.6V; 5V; 2.0 - 5.5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Features: ESD Protection
from Texas Instruments
Low-Power Single Positive-Edge-Triggered D-Type Flip-Flop 5-SOT-23 -40 to 85 [See More]
- Supply Voltage: 1.2V; 1.5V; 1.8V; 2.5V; 3.3V; 3.6V; 0.8,1.2,1.5,1.8,2.5,3.3
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Propagation Delay: 27.2
from Nexperia B.V.
The 74AHC1G79; 74AHCT1G79 is a single positive-edge triggered D - type flip-flop. Data at the D - input that meets the set-up and hold time requirements on the LOW-to-HIGH clock transition will be stored in the flip-flop and appear at the Q output. Inputs are... [See More]
- Supply Voltage: 2.5V; 3V; 3.3V; 3.6V; 5V; 2.0 - 5.5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Features: ESD Protection
from Texas Instruments
Low-Power Single Postitive-Edge-Triggered D-Type Flip-Flop 5-SOT-23 -40 to 85 [See More]
- Supply Voltage: 1.2V; 1.5V; 1.8V; 2.5V; 3.3V; 3.6V; 0.8,1.2,1.5,1.8,2.5,3.3
- Propagation Delay: 28.4
- Flip-Flop Type: D
- fMAX: 100
from Nexperia B.V.
The 74LVC1G79 is a single positive-edge triggered D-type flip-flop. Data at the D-input that meets the set-up and hold time requirements on the LOW-to-HIGH clock transition will be stored in the flip-flop and appear at the Q output. Inputs can be driven from either 3.3 V or 5 V devices. This feature... [See More]
- Supply Voltage: 1.8V; 2.5V; 3V; 3.3V; 3.6V; 5V; 1.65 - 5.5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Features: ESD Protection
from Texas Instruments
Low-Power Dual Positive-Edge-Triggered D-Type Flip-Flop 8-US8 -40 to 85 [See More]
- Supply Voltage: 1.2V; 1.5V; 1.8V; 2.5V; 3.3V; 3.6V; 0.8,1.2,1.5,1.8,2.5,3.3
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Propagation Delay: 27.2
from Nexperia B.V.
The 74LVC1G79 is a single positive-edge triggered D-type flip-flop. Data at the D-input that meets the set-up and hold time requirements on the LOW-to-HIGH clock transition will be stored in the flip-flop and appear at the Q output. Inputs can be driven from either 3.3 V or 5 V devices. This feature... [See More]
- Supply Voltage: 1.8V; 2.5V; 3V; 3.3V; 3.6V; 5V; 1.65 - 5.5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Features: ESD Protection
from Texas Instruments
Low-Power Dual Positive-Edge-Triggered D-Type Flip-Flop 8-US8 -40 to 85 [See More]
- Supply Voltage: 1.2V; 1.5V; 1.8V; 2.5V; 3.3V; 3.6V; 0.8,1.2,1.5,1.8,2.5,3.3
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Propagation Delay: 28.4
from Shenzhen Shengyu Electronics Technology Limited
IC FF D-TYPE SNGL 8BIT 20SO [See More]
- Supply Voltage: 3.6V
- Operating Temperature: -40 to 85
from Quarktwin Technology Ltd.
Flip Flop 2 Element D-Type 8 Bit Positive Edge 48-TFSOP (0.240", 6.10mm Width) [See More]
- Supply Voltage: 3.6V; 1.65V ~ 3.6V
- Operating Temperature: -40 to 85
- Flip-Flop Type: D
- Package Type: 48-TFSOP (0.240\", 6.10mm Width); SOP
from Shenzhen Shengyu Electronics Technology Limited
IC FF D-TYPE DUAL 8BIT 48SSOP [See More]
- Supply Voltage: 3.6V
- Operating Temperature: -40 to 85
from Quarktwin Technology Ltd.
Flip Flop 2 Element D-Type 8 Bit Positive Edge 48-TFSOP (0.240", 6.10mm Width) [See More]
- Supply Voltage: 3.6V; 1.65V ~ 3.6V
- Operating Temperature: -40 to 85
- Flip-Flop Type: D
- Package Type: 48-TFSOP (0.240\", 6.10mm Width); SOP
from Shenzhen Shengyu Electronics Technology Limited
20-BIT FLIP-FLOP [See More]
- Supply Voltage: 3.6V
- Operating Temperature: -40 to 85
from Quarktwin Technology Ltd.
Flip Flop 2 Element D-Type 8 Bit Positive Edge 54-LFBGA [See More]
- Supply Voltage: 3.6V; 1.65V ~ 3.6V
- Operating Temperature: -40 to 85
- Flip-Flop Type: D
- Package Type: 54-LFBGA; BGA
from Shenzhen Shengyu Electronics Technology Limited
IC FF D-TYPE DUAL 9BIT 56SSOP [See More]
- Supply Voltage: 3V; 3.6V
- Operating Temperature: -40 to 85
from Quarktwin Technology Ltd.
Flip Flop 2 Element D-Type 10 Bit Positive Edge 56-TFSOP (0.240", 6.10mm Width) [See More]
- Supply Voltage: 3.6V; 1.65V ~ 3.6V
- Operating Temperature: -40 to 85
- Flip-Flop Type: D
- Package Type: 56-TFSOP (0.240\", 6.10mm Width); SOP
from Shenzhen Shengyu Electronics Technology Limited
IC FF D-TYPE DUAL 10BIT 56TSSOP [See More]
- Supply Voltage: 3V; 3.6V
- Operating Temperature: -40 to 85
from Quarktwin Technology Ltd.
Flip Flop 2 Element D-Type 10 Bit Positive Edge 56-TFSOP (0.240", 6.10mm Width) [See More]
- Supply Voltage: 3.6V; 1.65V ~ 3.6V
- Operating Temperature: -40 to 85
- Flip-Flop Type: D
- Package Type: 56-TFSOP (0.240\", 6.10mm Width); SOP
from Shenzhen Shengyu Electronics Technology Limited
IC FF D-TYPE SNGL 1BIT 6XSON [See More]
- Supply Voltage: 3.6V
- Operating Temperature: -40 to 125
from Quarktwin Technology Ltd.
Flip Flop 1 Element D-Type 8 Bit Positive Edge 20-VFQFN Exposed Pad [See More]
- Supply Voltage: 3.6V; 1.65V ~ 3.6V
- Operating Temperature: -40 to 85
- Flip-Flop Type: D
- Package Type: 20-VFQFN Exposed Pad
from Shenzhen Shengyu Electronics Technology Limited
IC FF D-TYPE SNGL 1BIT 8XSON [See More]
- Supply Voltage: 3.6V
- Operating Temperature: -40 to 125
from Quarktwin Technology Ltd.
Flip Flop 1 Element D-Type 8 Bit Positive Edge 20-SOIC (0.295", 7.50mm Width) [See More]
- Supply Voltage: 3.6V; 1.65V ~ 3.6V
- Operating Temperature: -40 to 85
- Flip-Flop Type: D
- Package Type: 20-SOIC (0.295\", 7.50mm Width); SOIC
from Shenzhen Shengyu Electronics Technology Limited
IC FF D-TYPE SNGL 1BIT 5X2SON [See More]
- Supply Voltage: 3.6V
- Operating Temperature: -40 to 125
from Quarktwin Technology Ltd.
Flip Flop 1 Element D-Type 8 Bit Positive Edge 20-TSSOP (0.173", 4.40mm Width) [See More]
- Supply Voltage: 3.6V; 1.65V ~ 3.6V
- Operating Temperature: -40 to 85
- Flip-Flop Type: D
- Package Type: TSSOP; 20-TSSOP (0.173\", 4.40mm Width); SOP; SSOP
from Shenzhen Shengyu Electronics Technology Limited
IC FF D-TYPE DUAL 1BIT 8XSON [See More]
- Supply Voltage: 3.6V
- Operating Temperature: -40 to 125
from Quarktwin Technology Ltd.
Flip Flop 1 Element D-Type 8 Bit Positive Edge 20-SOIC (0.295", 7.50mm Width) [See More]
- Supply Voltage: 3.6V; 1.65V ~ 3.6V
- Operating Temperature: -40 to 85
- Flip-Flop Type: D
- Package Type: 20-SOIC (0.295\", 7.50mm Width); SOIC
from Shenzhen Shengyu Electronics Technology Limited
IC FF D-TYPE DUAL 1BIT 8VSSOP [See More]
- Supply Voltage: 3.6V
- Operating Temperature: -40 to 125
from Quarktwin Technology Ltd.
Flip Flop 1 Element D-Type 8 Bit Positive Edge 20-TSSOP (0.173", 4.40mm Width) [See More]
- Supply Voltage: 3.6V; 1.65V ~ 3.6V
- Operating Temperature: -40 to 85
- Flip-Flop Type: D
- Package Type: TSSOP; 20-TSSOP (0.173\", 4.40mm Width); SOP; SSOP
from Shenzhen Shengyu Electronics Technology Limited
IC FF D-TYPE DUAL 1BIT 8XQFN [See More]
- Supply Voltage: 3.6V
- Operating Temperature: -40 to 125
from Quarktwin Technology Ltd.
Flip Flop 1 Element D-Type 8 Bit Positive Edge 20-TSSOP (0.173", 4.40mm Width) [See More]
- Supply Voltage: 3.6V; 1.65V ~ 3.6V
- Operating Temperature: -40 to 85
- Flip-Flop Type: D
- Package Type: TSSOP; 20-TSSOP (0.173\", 4.40mm Width); SOP; SSOP
from Shenzhen Shengyu Electronics Technology Limited
IC FF D-TYPE SNGL 8BIT 20SOIC [See More]
- Supply Voltage: 3.6V
- Operating Temperature: -40 to 85
from Quarktwin Technology Ltd.
Flip Flop 2 Element D-Type 1 Bit Positive Edge 14-VFQFN Exposed Pad [See More]
- Supply Voltage: 3.6V; 1.65V ~ 3.6V
- Operating Temperature: -40 to 85
- Flip-Flop Type: D
- Package Type: 14-VFQFN Exposed Pad
from Shenzhen Shengyu Electronics Technology Limited
IC FF D-TYPE DUAL 8BIT 48TSSOP [See More]
- Supply Voltage: 3.6V
- Operating Temperature: -40 to 85
from Quarktwin Technology Ltd.
Flip Flop 2 Element D-Type 1 Bit Positive Edge 14-SOIC (0.154", 3.90mm Width) [See More]
- Supply Voltage: 3.6V; 1.65V ~ 3.6V
- Operating Temperature: -40 to 85
- Flip-Flop Type: D
- Package Type: 14-SOIC (0.154\", 3.90mm Width); SOIC
from Shenzhen Shengyu Electronics Technology Limited
IC FF D-TYPE SNGL 9BIT 24DHVQFN [See More]
- Supply Voltage: 3.6V
- Operating Temperature: -40 to 125
from Quarktwin Technology Ltd.
Flip Flop 2 Element D-Type 1 Bit Positive Edge 14-SOIC (0.154", 3.90mm Width) [See More]
- Supply Voltage: 3.6V; 1.65V ~ 3.6V
- Operating Temperature: -40 to 85
- Flip-Flop Type: D
- Package Type: 14-SOIC (0.154\", 3.90mm Width); SOIC
from Shenzhen Shengyu Electronics Technology Limited
IC FF D-TYPE DUAL 8BIT 48TSSOP [See More]
- Supply Voltage: 3.6V
- Operating Temperature: -40 to 125
from Quarktwin Technology Ltd.
Flip Flop 2 Element D-Type 1 Bit Positive Edge 14-TSSOP (0.173", 4.40mm Width) [See More]
- Supply Voltage: 3.6V; 1.65V ~ 3.6V
- Operating Temperature: -40 to 85
- Flip-Flop Type: D
- Package Type: TSSOP; 14-TSSOP (0.173\", 4.40mm Width); SOP; SSOP
from Shenzhen Shengyu Electronics Technology Limited
IC FF D-TYPE DUAL 8BIT 48TSSOP [See More]
- Supply Voltage: 3.6V
- Operating Temperature: -40 to 85
from Quarktwin Technology Ltd.
Flip Flop 2 Element D-Type 1 Bit Positive Edge 14-TSSOP (0.173", 4.40mm Width) [See More]
- Supply Voltage: 3.6V; 1.65V ~ 3.6V
- Operating Temperature: -40 to 85
- Flip-Flop Type: D
- Package Type: TSSOP; 14-TSSOP (0.173\", 4.40mm Width); SOP; SSOP
from Shenzhen Shengyu Electronics Technology Limited
IC FF D-TYPE SNGL 8BIT 20TSSOP [See More]
- Supply Voltage: 3.6V
- Operating Temperature: -40 to 85
from Quarktwin Technology Ltd.
Flip Flop 2 Element D-Type 1 Bit Positive Edge 14-TSSOP (0.173", 4.40mm Width) [See More]
- Supply Voltage: 3.6V; 1.65V ~ 3.6V
- Operating Temperature: -40 to 85
- Flip-Flop Type: D
- Package Type: TSSOP; 14-TSSOP (0.173\", 4.40mm Width); SOP; SSOP
from Shenzhen Shengyu Electronics Technology Limited
IC FF D-TYPE DUAL 1BIT 14SO [See More]
- Supply Voltage: 3.6V
- Operating Temperature: -40 to 85
from Quarktwin Technology Ltd.
Flip Flop 2 Element D-Type 1 Bit Positive Edge 14-TSSOP (0.173", 4.40mm Width) [See More]
- Supply Voltage: 3.6V; 1.65V ~ 3.6V
- Operating Temperature: -40 to 85
- Flip-Flop Type: D
- Package Type: TSSOP; 14-TSSOP (0.173\", 4.40mm Width); SOP; SSOP
from Shenzhen Shengyu Electronics Technology Limited
IC FF D-TYPE SNGL 8BIT 20SSOP [See More]
- Supply Voltage: 3.6V
- Operating Temperature: -40 to 85
from Quarktwin Technology Ltd.
Flip Flop 2 Element D-Type 1 Bit Positive Edge 14-TSSOP (0.173", 4.40mm Width) [See More]
- Supply Voltage: 3.6V; 1.65V ~ 3.6V
- Operating Temperature: -40 to 85
- Flip-Flop Type: D
- Package Type: TSSOP; 14-TSSOP (0.173\", 4.40mm Width); SOP; SSOP
from Shenzhen Shengyu Electronics Technology Limited
IC FF D-TYPE SNGL 8BIT 20SOIC [See More]
- Supply Voltage: 3.6V
- Operating Temperature: -40 to 85
from Quarktwin Technology Ltd.
Flip Flop 1 Element D-Type 20 Bit Positive Edge 56-BSSOP (0.295", 7.50mm Width) [See More]
- Supply Voltage: 3.6V; 1.65V ~ 3.6V
- Operating Temperature: -40 to 85
- Flip-Flop Type: D
- Package Type: 56-BSSOP (0.295\", 7.50mm Width); SOP; SSOP
from Shenzhen Shengyu Electronics Technology Limited
IC FF T-TYPE SNGL 1BIT 16SMT [See More]
- Supply Voltage: 3.6V
- Operating Temperature: -40 to 85
from Quarktwin Technology Ltd.
Flip Flop 2 Element D-Type 8 Bit Positive Edge 48-TFSOP (0.240", 6.10mm Width) [See More]
- Supply Voltage: 3.6V; 1.2V ~ 3.6V
- Operating Temperature: -40 to 85
- Flip-Flop Type: D
- Package Type: 48-TFSOP (0.240\", 6.10mm Width); SOP
from Shenzhen Shengyu Electronics Technology Limited
IC FF D-TYPE SNGL 20BIT 56TSSOP [See More]
- Supply Voltage: 3.6V
- Operating Temperature: -40 to 85
from Quarktwin Technology Ltd.
Flip Flop 2 Element D-Type 8 Bit Positive Edge 48-TFSOP (0.240", 6.10mm Width) [See More]
- Supply Voltage: 3.6V; 1.2V ~ 3.6V
- Operating Temperature: -40 to 85
- Flip-Flop Type: D
- Package Type: 48-TFSOP (0.240\", 6.10mm Width); SOP
from Shenzhen Shengyu Electronics Technology Limited
IC FF D-TYPE DUAL 8BIT 48TSSOP [See More]
- Supply Voltage: 3.6V
- Operating Temperature: -40 to 85
from Quarktwin Technology Ltd.
Flip Flop 2 Element D-Type 8 Bit Positive Edge 48-TFSOP (0.240", 6.10mm Width) [See More]
- Supply Voltage: 3.6V; 1.65V ~ 3.6V
- Operating Temperature: -40 to 85
- Flip-Flop Type: D
- Package Type: 48-TFSOP (0.240\", 6.10mm Width); SOP
from Quarktwin Technology Ltd.
Flip Flop 2 Element D-Type 8 Bit Positive Edge 48-BSSOP (0.295", 7.50mm Width) [See More]
- Supply Voltage: 3.6V; 1.2V ~ 3.6V
- Operating Temperature: -40 to 85
- Flip-Flop Type: D
- Package Type: 48-BSSOP (0.295\", 7.50mm Width); SOP; SSOP
from Quarktwin Technology Ltd.
Flip Flop 2 Element D-Type 8 Bit Positive Edge 48-BSSOP (0.295", 7.50mm Width) [See More]
- Supply Voltage: 3.6V; 1.2V ~ 3.6V
- Operating Temperature: -40 to 85
- Flip-Flop Type: D
- Package Type: 48-BSSOP (0.295\", 7.50mm Width); SOP; SSOP