3.3 V Flip-Flops
from Rochester Electronics
74ALVCH16721 - 3.3V CMOS 20-Bit Flip-Flop With 3-State Outputs And Bus-Hold [See More]
- Supply Voltage: 3.3V
- Package Type: TSSOP; TSSOP56; SOP; SSOP
- Output Characteristics: 3-State
- Logic Family: CMOS
from Nexperia B.V.
The 74LVCH162374A is a 16 - bit edge triggered flip - flop featuring separate D - type inputs for each flip - flop and 3 - state outputs for bus - oriented applications. The device consists of two... [See More]
- Supply Voltage: 1.2V; 1.5V; 1.8V; 2.5V; 3V; 3.3V; 3.6V; 1.2 - 3.6
- Output Characteristics: 3-State
- Flip-Flop Type: D
- Features: ESD Protection
from Texas Instruments
Dual Positive-Edge-Triggered D-Type Flip-Flops With Clear and Preset 14-SOIC -40 to 85 [See More]
- Supply Voltage: 3V; 3.3V; 5V; 3.3,5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Propagation Delay: 11.4
from Rochester Electronics
SN74ALVTH16374 2.5-V/3.3-V 16-Bit Edge-Triggered D-Type Flip-Flops With 3-State Outputs [See More]
- Supply Voltage: 2.5V; 3.3V
- Package Type: BGA MICROSTAR JUNIOR-56; BGA
- Output Characteristics: 3-State
from Nexperia B.V.
The 74ALVT162823 is an 18-bit positive-edge triggered D-type flip-flop with 30 Ω termination resistors, 3-state outputs reset and enable. The device can be used as two 9-bit flip-flops or one 18-bit flip-flop. The device features clock (nCP), clock enable (nCE), master reset (nMR) and output... [See More]
- Supply Voltage: 2.5V; 3V; 3.3V; 3.6V; 2.3 - 3.6
- Output Characteristics: 3-State; OE
- Flip-Flop Type: D
- Features: ESD Protection
from Texas Instruments
16-Bit Edge-Triggered D-Type Flip-Flops With 3-State Outputs 48-SSOP -40 to 85 [See More]
- Supply Voltage: 3V; 3.3V; 5V; 3.3,5
- Output Characteristics: 3-State
- Flip-Flop Type: D
- Propagation Delay: 17
from Rochester Electronics
3.3 V / 5.0 V ECL D Flip-Flop with Reset and Differential Clock [See More]
- Supply Voltage: 3.3V
- Package Type: SOIC-8 Narrow Body; SOIC
- Flip-Flop Type: D
- Logic Family: ECL
from Nexperia B.V.
The HEF4013B is a dual D-type flip-flop with set and reset; positive-edge trigger. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VDD. Schmitt-trigger action on the clock input makes the circuit highly tolerant of slower... [See More]
- Supply Voltage: 3V; 3.3V; 3.6V; 5V; 3.0 - 15
- Features: ESD Protection
- Flip-Flop Type: D
- Propagation Delay: 30
from Texas Instruments
Octal D-Type Flip-Flops with Reset 20-CDIP -55 to 125 [See More]
- Supply Voltage: 1.5V; 3.3V; 5V; 1.5,3.3,5
- Propagation Delay: 154
- Flip-Flop Type: D
- fMAX: 100
from Rochester Electronics
3.3 V / 5.0 V ECL D Flip-Flop with Reset and Differential Clock [See More]
- Supply Voltage: 3.3V
- Package Type: TSSOP; TSSOP 8 3.0x3.0x0.95 mm; SOP; SSOP
- Flip-Flop Type: D
- Logic Family: ECL
from Nexperia B.V.
The HEF4013B is a dual D-type flip-flop with set and reset; positive-edge trigger. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VDD. Schmitt-trigger action on the clock input makes the circuit highly tolerant of slower... [See More]
- Supply Voltage: 3V; 3.3V; 3.6V; 5V; 3.0 - 15
- Features: ESD Protection
- Flip-Flop Type: D
- Propagation Delay: 30
from Texas Instruments
Octal D-Type Flip-Flops with 3-State Outputs 20-CDIP -55 to 125 [See More]
- Supply Voltage: 1.5V; 3.3V; 5V; 1.5,3.3,5
- Output Characteristics: 3-State
- Flip-Flop Type: D
- Propagation Delay: 123
from Rochester Electronics
SN74ALVCH162721 3.3-V 20-Bit Flip-Flop With 3-State Outputs [See More]
- Supply Voltage: 3.3V
- Package Type: TSSOP; TSSOP56; SOP; SSOP
- Output Characteristics: 3-State
from Nexperia B.V.
The 74HC74 and 74HCT74 are dual positive edge triggered D-type flip-flop. They have individual data (nD), clock (nCP), set (nSD) and reset (nRD) inputs, and complementary nQ and nQ outputs. Data at the nD-input, that meets the set-up and hold time requirements on the LOW-to-HIGH clock transition, is... [See More]
- Supply Voltage: 2.5V; 3V; 3.3V; 3.6V; 5V; 2.0 - 6.0
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Propagation Delay: 14
from Texas Instruments
Non-Inverting Octal D-Type Flip-Flops with 3-State Outputs 20-CDIP -55 to 125 [See More]
- Supply Voltage: 1.5V; 3.3V; 5V; 1.5,3.3,5
- Output Characteristics: 3-State
- Flip-Flop Type: D
- Propagation Delay: 123
from Rochester Electronics
SN74ALVCH16721 3.3-V 20-Bit Flip-Flop With 3-State Outputs [See More]
- Supply Voltage: 3.3V
- Package Type: SSOP56; SOP; SSOP
- Output Characteristics: 3-State
from Nexperia B.V.
The 74AHC74; 74AHCT74 is a high-speed Si-gate CMOS device and is pin compatible with Low - Power Schottky TTL (LSTTL). It is specified in compliance with JEDEC standard No. 7-A. The 74AHC74; 74AHCT74 is a dual positive-edge triggered, D-type flip-flop with individual data inputs (D),... [See More]
- Supply Voltage: 2.5V; 3V; 3.3V; 3.6V; 5V; 2.0 - 5.5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Features: ESD Protection
from Texas Instruments
Dual Positive-Edge-Triggered D-Type Flip-Flops with Set and Reset 14-CDIP -55 to 125 [See More]
- Supply Voltage: 1.5V; 3.3V; 5V; 1.5,3.3,5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Propagation Delay: 114
from Rochester Electronics
SN74LVTH162374 3.3-V ABT 16-Bit Edge-Triggered D-Type Flip-Flops With 3-State Outputs [See More]
- Supply Voltage: 3.3V
- Package Type: SSOP48; SOP; SSOP
- Output Characteristics: 3-State
from Nexperia B.V.
The HEF4027B is a dual positive-edge triggered JK flip-flop featuring independent set direct (nSD), clear direct (nCD), clock inputs (nCP) and complementary outputs (nQ and nQ). Data is accepted when nCP is LOW, and transferred to the output on the positive-going edge of the clock. The asynchronous... [See More]
- Supply Voltage: 3V; 3.3V; 3.6V; 5V; 3.0 - 15
- Features: ESD Protection
- Flip-Flop Type: J-K
- Propagation Delay: 30
from Texas Instruments
Dual Positive-Edge-Triggered J-K Flip-Flops with Set and Reset 16-PDIP -55 to 125 [See More]
- Supply Voltage: 1.5V; 3.3V; 5V; 3.3,5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: J-K
- Propagation Delay: 11.1
from Rochester Electronics
SN74LVTH273 3.3-V ABT Octal D-Type Flip-Flops With Clear [See More]
- Supply Voltage: 3.3V
- Package Type: DIP; DIP20
from Nexperia B.V.
The 74HC112; 74HCT112 is a dual negative-edge triggered JK flip-flop. It features individual J and K inputs, clock (nCP) set (nSD) and reset (nRD) inputs. It also has complementary nQ and nQ outputs. The set and reset are asynchronous active LOW inputs and operate independently of the clock input. [See More]
- Supply Voltage: 2.5V; 3V; 3.3V; 3.6V; 5V; 2.0 - 6.0
- Triggering: Negative-edge Triggered
- Flip-Flop Type: J-K
- Features: ESD Protection
from Texas Instruments
Dual Negative-Edge-Triggered J-K Flip-Flops with Set and Reset 16-PDIP -55 to 125 [See More]
- Supply Voltage: 1.5V; 3.3V; 5V; 3.3,5
- Triggering: Negative-edge Triggered
- Flip-Flop Type: J-K
- Propagation Delay: 11.1
from Rochester Electronics
SN74LVTH374 3.3-V ABT Octal Edge-Triggered D-Type Flip-Flops With 3-State Outputs [See More]
- Supply Voltage: 3.3V
- Package Type: SOP20; SOP
- Output Characteristics: 3-State
from Nexperia B.V.
The 74LVC574A is an 8 - bit positive - edge triggered D - type flip - flop with 3 - state outputs. The device features a clock (CP) and output enable (OE) inputs. The flip - flops will store the state of... [See More]
- Supply Voltage: 1.2V; 1.5V; 1.8V; 2.5V; 3V; 3.3V; 3.6V; 1.2 - 3.6
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Output Characteristics: 3-State
from Texas Instruments
Hex D-Type Flip-Flops with Reset 16-PDIP -55 to 125 [See More]
- Supply Voltage: 1.5V; 3.3V; 5V; 1.5,3.3,5
- Propagation Delay: 154
- Flip-Flop Type: D
- fMAX: 100
from Rochester Electronics
SN74LVTH374 3.3-V ABT Octal Edge-Triggered D-Type Flip-Flops With 3-State Outputs [See More]
- Supply Voltage: 3.3V
- Package Type: TSSOP; TSSOP20; SOP; SSOP
- Output Characteristics: 3-State
from Nexperia B.V.
The 74LVC574A is an 8 - bit positive - edge triggered D - type flip - flop with 3 - state outputs. The device features a clock (CP) and output enable (OE) inputs. The flip - flops will store the state of... [See More]
- Supply Voltage: 1.2V; 1.5V; 1.8V; 2.5V; 3V; 3.3V; 3.6V; 1.2 - 3.6
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Output Characteristics: 3-State
from Texas Instruments
Quad D-Type Flip-Flops with Reset 16-SOIC -55 to 125 [See More]
- Supply Voltage: 1.5V; 3.3V; 5V; 1.5,3.3,5
- Propagation Delay: 139
- Flip-Flop Type: D
- fMAX: 100
from Rochester Electronics
54LVTH574 3.3-V ABT Octal Edge-Triggered D-type Flip-Flops With 3-State Outputs [See More]
- Supply Voltage: 3.3V
- Package Type: LCCC; LCCC20
- Output Characteristics: 3-State
from Nexperia B.V.
The 74LVC574A is an 8 - bit positive - edge triggered D - type flip - flop with 3 - state outputs. The device features a clock (CP) and output enable (OE) inputs. The flip - flops will store the state of... [See More]
- Supply Voltage: 1.2V; 1.5V; 1.8V; 2.5V; 3V; 3.3V; 3.6V; 1.2 - 3.6
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Output Characteristics: 3-State
from Texas Instruments
Octal D-Type Flip-Flops with Reset 20-PDIP -55 to 125 [See More]
- Supply Voltage: 1.5V; 3.3V; 5V; 1.5,3.3,5
- Propagation Delay: 154
- Flip-Flop Type: D
- fMAX: 100
from Nexperia B.V.
The 74LVC1G175 is a low-power, low-voltage single positive edge triggered D-type flip-flop with individual data (D) input, clock (CP) input, master reset (MR) input, and Q output. The master reset (MR) is an asynchronous active LOW input and operates independently of the clock input. Information on... [See More]
- Supply Voltage: 1.8V; 2.5V; 3V; 3.3V; 3.6V; 5V; 1.65 - 5.5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Features: ESD Protection
from Texas Instruments
Octal D-Type Flip-Flops with 3-State Outputs 20-PDIP -55 to 125 [See More]
- Supply Voltage: 1.5V; 3.3V; 5V; 1.5,3.3,5
- Output Characteristics: 3-State
- Flip-Flop Type: D
- Propagation Delay: 123
from Nexperia B.V.
The 74LVC1G175 is a low-power, low-voltage single positive edge triggered D-type flip-flop with individual data (D) input, clock (CP) input, master reset (MR) input, and Q output. The master reset (MR) is an asynchronous active LOW input and operates independently of the clock input. Information on... [See More]
- Supply Voltage: 1.8V; 2.5V; 3V; 3.3V; 3.6V; 5V; 1.65 - 5.5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Features: ESD Protection
from Texas Instruments
Octal D-Type Flip-Flops with 3-State Outputs 20-SOIC -55 to 125 [See More]
- Supply Voltage: 1.5V; 3.3V; 5V; 1.5,3.3,5
- Output Characteristics: 3-State
- Flip-Flop Type: D
- Propagation Delay: 123
from Nexperia B.V.
The 74LVC1G175 is a low-power, low-voltage single positive edge triggered D-type flip-flop with individual data (D) input, clock (CP) input, master reset (MR) input, and Q output. The master reset (MR) is an asynchronous active LOW input and operates independently of the clock input. Information on... [See More]
- Supply Voltage: 1.8V; 2.5V; 3V; 3.3V; 3.6V; 5V; 1.65 - 5.5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Features: ESD Protection
from Texas Instruments
Octal Non-Inverting D-Type Flip-Flops with 3-State Outputs 20-PDIP -55 to 125 [See More]
- Supply Voltage: 1.5V; 3.3V; 5V; 1.5,3.3,5
- Output Characteristics: 3-State
- Flip-Flop Type: D
- Propagation Delay: 123
from Nexperia B.V.
The 74LVC1G175 is a low-power, low-voltage single positive edge triggered D-type flip-flop with individual data (D) input, clock (CP) input, master reset (MR) input, and Q output. The master reset (MR) is an asynchronous active LOW input and operates independently of the clock input. Information on... [See More]
- Supply Voltage: 1.8V; 2.5V; 3V; 3.3V; 3.6V; 5V; 1.65 - 5.5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Features: ESD Protection
from Texas Instruments
Dual Positive-Edge-Triggered D-Type Flip-Flops with Set and Reset 14-PDIP -55 to 125 [See More]
- Supply Voltage: 1.5V; 3.3V; 5V; 1.5,3.3,5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Propagation Delay: 114
from Nexperia B.V.
The 74LVC1G175 is a low-power, low-voltage single positive edge triggered D-type flip-flop with individual data (D) input, clock (CP) input, master reset (MR) input, and Q output. The master reset (MR) is an asynchronous active LOW input and operates independently of the clock input. Information on... [See More]
- Supply Voltage: 1.8V; 2.5V; 3V; 3.3V; 3.6V; 5V; 1.65 - 5.5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Features: ESD Protection
from Texas Instruments
High Speed CMOS Logic Dual Negative-Edge-Triggered J-K Flip-Flops with Reset 14-PDIP -55 to 125 [See More]
- Supply Voltage: 3.3V; 5V; 3.3,5
- Triggering: Negative-edge Triggered
- Flip-Flop Type: J-K
- Propagation Delay: 51
from Nexperia B.V.
The 74LVC1G74 is a single positive edge triggered D-type flip-flop with individual data (D), clock (CP), set (SD) and reset (RD) inputs, and complementary Q and Q outputs. Data at the D-input that meets the set-up and hold time requirements on the LOW-to-HIGH clock transition will be stored in the... [See More]
- Supply Voltage: 1.8V; 2.5V; 3V; 3.3V; 3.6V; 5V; 1.65 - 5.5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Features: ESD Protection
from Texas Instruments
High Speed CMOS Logic Dual Positive-Edge-Triggered J-K Flip-Flops with Set and Reset 16-PDIP -55 to 125 [See More]
- Supply Voltage: 3.3V; 5V; 3.3,5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: J-K
- Propagation Delay: 53
from Nexperia B.V.
The 74LVC1G74 is a single positive edge triggered D-type flip-flop with individual data (D), clock (CP), set (SD) and reset (RD) inputs, and complementary Q and Q outputs. Data at the D-input that meets the set-up and hold time requirements on the LOW-to-HIGH clock transition will be stored in the... [See More]
- Supply Voltage: 1.8V; 2.5V; 3V; 3.3V; 3.6V; 5V; 1.65 - 5.5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Features: ESD Protection
from Texas Instruments
High Speed CMOS Logic Dual Negative-Edge-Triggered J-K Flip-Flops with Set and Reset 16-PDIP -55 to 125 [See More]
- Supply Voltage: 3.3V; 5V; 3.3,5
- Triggering: Negative-edge Triggered
- Flip-Flop Type: J-K
- Propagation Delay: 53
from Nexperia B.V.
The 74LVC1G74 is a single positive edge triggered D-type flip-flop with individual data (D), clock (CP), set (SD) and reset (RD) inputs, and complementary Q and Q outputs. Data at the D-input that meets the set-up and hold time requirements on the LOW-to-HIGH clock transition will be stored in the... [See More]
- Supply Voltage: 1.8V; 2.5V; 3V; 3.3V; 3.6V; 5V; 1.65 - 5.5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Features: ESD Protection
from Texas Instruments
High Speed CMOS Logic Quad D-Type Flip-Flops with 3-State Outputs 16-PDIP -55 to 125 [See More]
- Supply Voltage: 3.3V; 5V; 3.3,5
- Output Characteristics: 3-State
- Flip-Flop Type: D
- Propagation Delay: 43
from Nexperia B.V.
The 74LVC1G74 is a single positive edge triggered D-type flip-flop with individual data (D), clock (CP), set (SD) and reset (RD) inputs, and complementary Q and Q outputs. Data at the D-input that meets the set-up and hold time requirements on the LOW-to-HIGH clock transition will be stored in the... [See More]
- Supply Voltage: 1.8V; 2.5V; 3V; 3.3V; 3.6V; 5V; 1.65 - 5.5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Features: ESD Protection
from Texas Instruments
High Speed CMOS Logic Hex D-Type Flip-Flops with Reset 16-PDIP -55 to 125 [See More]
- Supply Voltage: 3.3V; 5V; 3.3,5
- Propagation Delay: 35
- Flip-Flop Type: D
- fMAX: 28
from Nexperia B.V.
The 74LVC1G74 is a single positive edge triggered D-type flip-flop with individual data (D), clock (CP), set (SD) and reset (RD) inputs, and complementary Q and Q outputs. Data at the D-input that meets the set-up and hold time requirements on the LOW-to-HIGH clock transition will be stored in the... [See More]
- Supply Voltage: 1.8V; 2.5V; 3V; 3.3V; 3.6V; 5V; 1.65 - 5.5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Features: ESD Protection
from Texas Instruments
High Speed CMOS Logic Quad D-Type Flip-Flops with Reset 16-PDIP -55 to 125 [See More]
- Supply Voltage: 3.3V; 5V; 3.3,5
- Propagation Delay: 37
- Flip-Flop Type: D
- fMAX: 28
from Nexperia B.V.
The 74AHC1G79; 74AHCT1G79 is a single positive-edge triggered D - type flip-flop. Data at the D - input that meets the set-up and hold time requirements on the LOW-to-HIGH clock transition will be stored in the flip-flop and appear at the Q output. Inputs are... [See More]
- Supply Voltage: 2.5V; 3V; 3.3V; 3.6V; 5V; 2.0 - 5.5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Features: ESD Protection
from Texas Instruments
High Speed CMOS Logic Octal D-Type Flip-Flops with Reset 20-PDIP -55 to 125 [See More]
- Supply Voltage: 3.3V; 5V; 3.3,5
- Propagation Delay: 30
- Flip-Flop Type: D
- fMAX: 28
from Nexperia B.V.
The 74AHC1G79; 74AHCT1G79 is a single positive-edge triggered D - type flip-flop. Data at the D - input that meets the set-up and hold time requirements on the LOW-to-HIGH clock transition will be stored in the flip-flop and appear at the Q output. Inputs are... [See More]
- Supply Voltage: 2.5V; 3V; 3.3V; 3.6V; 5V; 2.0 - 5.5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Features: ESD Protection
from Texas Instruments
High Speed CMOS Logic Octal Positive-Edge-Triggered D-Type Flip-Flops with 3-State Outputs 20-PDIP -55 to 125 [See More]
- Supply Voltage: 3.3V; 5V; 3.3,5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Output Characteristics: 3-State
from Nexperia B.V.
The 74LVC1G79 is a single positive-edge triggered D-type flip-flop. Data at the D-input that meets the set-up and hold time requirements on the LOW-to-HIGH clock transition will be stored in the flip-flop and appear at the Q output. Inputs can be driven from either 3.3 V or 5 V devices. This feature... [See More]
- Supply Voltage: 1.8V; 2.5V; 3V; 3.3V; 3.6V; 5V; 1.65 - 5.5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Features: ESD Protection
from Texas Instruments
High Speed CMOS Logic Octal D-Type Flip-Flops with Data Enable 20-PDIP -55 to 125 [See More]
- Supply Voltage: 3.3V; 5V; 3.3,5
- Propagation Delay: 37
- Flip-Flop Type: D
- fMAX: 28
from Nexperia B.V.
The 74LVC1G79 is a single positive-edge triggered D-type flip-flop. Data at the D-input that meets the set-up and hold time requirements on the LOW-to-HIGH clock transition will be stored in the flip-flop and appear at the Q output. Inputs can be driven from either 3.3 V or 5 V devices. This feature... [See More]
- Supply Voltage: 1.8V; 2.5V; 3V; 3.3V; 3.6V; 5V; 1.65 - 5.5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Features: ESD Protection
from Texas Instruments
High Speed CMOS Logic Octal Positive-Edge-Triggered Inverting D-Type Flip-Flops with 3-State Outputs 20-PDIP -55 to 125 [See More]
- Supply Voltage: 3.3V; 5V; 3.3,5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Output Characteristics: 3-State
from Microchip Technology, Inc.
The SY10/100E131 are high-speed quad master slave D-type flip-flops with differential outputs designed for use in new, high-performance ECL systems. The flip-flops may be individually clocked by holding CC (Common Clock) at a logic LOW and then using the four individual CE (Clock Enable CE0-CE3)... [See More]
- Supply Voltage: 3.3V; 5V
- Logic Family: PECL
- fMAX: 750
from Integrated Device Technology
The 74LVC16374A 16-bit high-speed, low-power edge-triggered D-type flip-flop is ideal for use as a buffer register for data synchronization and storage and can operate as two 8-bit registers or one 16-bit register with common clock. All pins of the 74LVC16374A can be driven from either 3.3V or 5V... [See More]
- Supply Voltage: 3.3V
- Output Characteristics: 3-State
- Flip-Flop Type: D
- Operating Temperature: -40 to 85
from Integrated Device Technology
The 74LVCH162374A 16-bit high-speed, low power edge-triggered D-type flip-flop is ideal for use as a buffer register for data synchronization and storage. It can operate as two 8-bit registers or one 16-bit register with common clock. All pins of the 74LVCH162374A can be driven from either 3.3V or... [See More]
- Supply Voltage: 3.3V
- Output Characteristics: 3-State
- Flip-Flop Type: D
- Operating Temperature: -40 to 85
from Integrated Device Technology
The 74LVCH16374A 16-bit edge-triggered D-type register is ideal for use as a buffer register for data synchronization and storage. Flow-through organization of signal pins simplifies layout. All pins of the 74LVCH16374A can be driven from either 3.3V or 5V devices which allows the use of this device... [See More]
- Supply Voltage: 3.3V
- Output Characteristics: 3-State
- Flip-Flop Type: D
- Operating Temperature: -40 to 85