5 V Flip-Flops
from Rochester Electronics
54ACT825/QKA - Dual marked (5962-9161101MKA), D-Type Flip-Flop, 5V, 24-CFP [See More]
- Supply Voltage: 5V
- Package Type: CFP24
from Nexperia B.V.
The HEF4013B is a dual D-type flip-flop with set and reset; positive-edge trigger. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VDD. Schmitt-trigger action on the clock input makes the circuit highly tolerant of slower... [See More]
- Supply Voltage: 3V; 3.3V; 3.6V; 5V; 3.0 - 15
- Features: ESD Protection
- Flip-Flop Type: D
- Propagation Delay: 30
from Texas Instruments
Dual Positive-Edge-Triggered D-Type Flip-Flops With Clear and Preset 14-SOIC -40 to 85 [See More]
- Supply Voltage: 3V; 3.3V; 5V; 3.3,5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Propagation Delay: 11.4
from Rochester Electronics
54F534/B2A - Flip Flop D-Type Positive Edge 1 Element 5V Dual marked M38510/34106B2A [See More]
- Supply Voltage: 5V
- Package Type: LCC
- Triggering: Positive-edge Triggered
from Nexperia B.V.
The HEF4013B is a dual D-type flip-flop with set and reset; positive-edge trigger. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VDD. Schmitt-trigger action on the clock input makes the circuit highly tolerant of slower... [See More]
- Supply Voltage: 3V; 3.3V; 3.6V; 5V; 3.0 - 15
- Features: ESD Protection
- Flip-Flop Type: D
- Propagation Delay: 30
from Texas Instruments
16-Bit Edge-Triggered D-Type Flip-Flops With 3-State Outputs 48-SSOP -40 to 85 [See More]
- Supply Voltage: 3V; 3.3V; 5V; 3.3,5
- Output Characteristics: 3-State
- Flip-Flop Type: D
- Propagation Delay: 17
from Rochester Electronics
74HCT534 5V Octal D-Type Flip-Flop, Positive-Edge Trigger, Inverting [See More]
- Supply Voltage: 5V
- Package Type: DIP; PDIP; PDIP20
- Triggering: Positive-edge Triggered
from Nexperia B.V.
The 74HC74 and 74HCT74 are dual positive edge triggered D-type flip-flop. They have individual data (nD), clock (nCP), set (nSD) and reset (nRD) inputs, and complementary nQ and nQ outputs. Data at the nD-input, that meets the set-up and hold time requirements on the LOW-to-HIGH clock transition, is... [See More]
- Supply Voltage: 2.5V; 3V; 3.3V; 3.6V; 5V; 2.0 - 6.0
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Propagation Delay: 14
from Texas Instruments
Dual Positive-Edge-Triggered D-Type Flip-Flops With Clear and Preset 14-SOIC -40 to 85 [See More]
- Supply Voltage: 5V; 5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Propagation Delay: 9.4
from Rochester Electronics
DM54173 - Quad D-Type FLIP FLOP, 5V [See More]
- Supply Voltage: 5V
- Package Type: DIP; CDIP
from Nexperia B.V.
The 74HC74 and 74HCT74 are dual positive edge triggered D-type flip-flop. They have individual data (nD), clock (nCP), set (nSD) and reset (nRD) inputs, and complementary nQ and nQ outputs. Data at the nD-input, that meets the set-up and hold time requirements on the LOW-to-HIGH clock transition, is... [See More]
- Supply Voltage: 5V; 4.5 - 5.5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Propagation Delay: 15
from Texas Instruments
Octal Edge-Triggered D-Type Flip-Flops with 3-State Outputs 24-SOIC -40 to 85 [See More]
- Supply Voltage: 5V; 5
- Output Characteristics: 3-State
- Flip-Flop Type: D
- Propagation Delay: 13
from Rochester Electronics
DM54173 - Quad D-Type FLIP FLOP, 5V [See More]
- Supply Voltage: 5V
- Package Type: CFP
from Nexperia B.V.
The HEF4027B is a dual positive-edge triggered JK flip-flop featuring independent set direct (nSD), clear direct (nCD), clock inputs (nCP) and complementary outputs (nQ and nQ). Data is accepted when nCP is LOW, and transferred to the output on the positive-going edge of the clock. The asynchronous... [See More]
- Supply Voltage: 3V; 3.3V; 3.6V; 5V; 3.0 - 15
- Features: ESD Protection
- Flip-Flop Type: J-K
- Propagation Delay: 30
from Texas Instruments
16-Bit D-Type Edge-Triggered Flip-Flops With 3-State Outputs 48-SSOP -40 to 85 [See More]
- Supply Voltage: 5V; 5
- Propagation Delay: 12.4
- Output Characteristics: 3-State
- fMAX: 90
from Rochester Electronics
SN74F112 - Flip Flop JK Type Negative Edge 2 Element 5V [See More]
- Supply Voltage: 5V
- Triggering: Negative-edge Triggered
- Flip-Flop Type: J-K
- Package Type: SOIC16; SOIC
from Nexperia B.V.
The 74HC112; 74HCT112 is a dual negative-edge triggered JK flip-flop. It features individual J and K inputs, clock (nCP) set (nSD) and reset (nRD) inputs. It also has complementary nQ and nQ outputs. The set and reset are asynchronous active LOW inputs and operate independently of the clock input. [See More]
- Supply Voltage: 2.5V; 3V; 3.3V; 3.6V; 5V; 2.0 - 6.0
- Triggering: Negative-edge Triggered
- Flip-Flop Type: J-K
- Features: ESD Protection
from Texas Instruments
18-Bit Bus-Interface Flip-Flops with 3-State Outputs 56-SSOP -40 to 85 [See More]
- Supply Voltage: 5V; 5
- Propagation Delay: 12.9
- Output Characteristics: 3-State
- fMAX: 90
from Nexperia B.V.
The 74HC377; 74HCT377 is an octal positive-edge triggered D-type flip-flop. The device features clock (CP) and data enable (E) inputs. When E is LOW, the outputs Qn assume the state of their corresponding Dn inputs that meet the set-up and hold time requirements on the LOW-to-HIGH clock (CP)... [See More]
- Supply Voltage: 2.5V; 3V; 3.3V; 3.6V; 5V; 2.0 - 6.0
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Output Characteristics: OE
from Texas Instruments
Octal D-Type Flip-Flops with Reset 20-CDIP -55 to 125 [See More]
- Supply Voltage: 1.5V; 3.3V; 5V; 1.5,3.3,5
- Propagation Delay: 154
- Flip-Flop Type: D
- fMAX: 100
from Nexperia B.V.
The 74HC377; 74HCT377 is an octal positive-edge triggered D-type flip-flop. The device features clock (CP) and data enable (E) inputs. When E is LOW, the outputs Qn assume the state of their corresponding Dn inputs that meet the set-up and hold time requirements on the LOW-to-HIGH clock (CP)... [See More]
- Supply Voltage: 2.5V; 3V; 3.3V; 3.6V; 5V; 2.0 - 6.0
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Output Characteristics: OE
from Texas Instruments
Octal D-Type Flip-Flops with 3-State Outputs 20-CDIP -55 to 125 [See More]
- Supply Voltage: 1.5V; 3.3V; 5V; 1.5,3.3,5
- Output Characteristics: 3-State
- Flip-Flop Type: D
- Propagation Delay: 123
from Nexperia B.V.
The 74AHC273; 74AHCT273 is an octal positive-edge triggered D-type flip-flop. The device features clock (CP) and master reset (MR) inputs. The outputs Qn will assume the state of their corresponding D inputs that meet the set-up and hold time requirements on the LOW-to-HIGH clock (CP) transition. A... [See More]
- Supply Voltage: 2.5V; 3V; 3.3V; 3.6V; 5V; 2.0 - 5.5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Features: ESD Protection
from Texas Instruments
Non-Inverting Octal D-Type Flip-Flops with 3-State Outputs 20-CDIP -55 to 125 [See More]
- Supply Voltage: 1.5V; 3.3V; 5V; 1.5,3.3,5
- Output Characteristics: 3-State
- Flip-Flop Type: D
- Propagation Delay: 123
from Nexperia B.V.
The 74LVC1G175 is a low-power, low-voltage single positive edge triggered D-type flip-flop with individual data (D) input, clock (CP) input, master reset (MR) input, and Q output. The master reset (MR) is an asynchronous active LOW input and operates independently of the clock input. Information on... [See More]
- Supply Voltage: 1.8V; 2.5V; 3V; 3.3V; 3.6V; 5V; 1.65 - 5.5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Features: ESD Protection
from Texas Instruments
Dual Positive-Edge-Triggered D-Type Flip-Flops with Set and Reset 14-CDIP -55 to 125 [See More]
- Supply Voltage: 1.5V; 3.3V; 5V; 1.5,3.3,5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Propagation Delay: 114
from Nexperia B.V.
The 74LVC1G175 is a low-power, low-voltage single positive edge triggered D-type flip-flop with individual data (D) input, clock (CP) input, master reset (MR) input, and Q output. The master reset (MR) is an asynchronous active LOW input and operates independently of the clock input. Information on... [See More]
- Supply Voltage: 1.8V; 2.5V; 3V; 3.3V; 3.6V; 5V; 1.65 - 5.5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Features: ESD Protection
from Texas Instruments
Dual Positive-Edge-Triggered J-K Flip-Flops with Set and Reset 16-PDIP -55 to 125 [See More]
- Supply Voltage: 1.5V; 3.3V; 5V; 3.3,5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: J-K
- Propagation Delay: 11.1
from Nexperia B.V.
The 74LVC1G175 is a low-power, low-voltage single positive edge triggered D-type flip-flop with individual data (D) input, clock (CP) input, master reset (MR) input, and Q output. The master reset (MR) is an asynchronous active LOW input and operates independently of the clock input. Information on... [See More]
- Supply Voltage: 1.8V; 2.5V; 3V; 3.3V; 3.6V; 5V; 1.65 - 5.5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Features: ESD Protection
from Texas Instruments
Dual Negative-Edge-Triggered J-K Flip-Flops with Set and Reset 16-PDIP -55 to 125 [See More]
- Supply Voltage: 1.5V; 3.3V; 5V; 3.3,5
- Triggering: Negative-edge Triggered
- Flip-Flop Type: J-K
- Propagation Delay: 11.1
from Nexperia B.V.
The 74LVC1G175 is a low-power, low-voltage single positive edge triggered D-type flip-flop with individual data (D) input, clock (CP) input, master reset (MR) input, and Q output. The master reset (MR) is an asynchronous active LOW input and operates independently of the clock input. Information on... [See More]
- Supply Voltage: 1.8V; 2.5V; 3V; 3.3V; 3.6V; 5V; 1.65 - 5.5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Features: ESD Protection
from Texas Instruments
Hex D-Type Flip-Flops with Reset 16-PDIP -55 to 125 [See More]
- Supply Voltage: 1.5V; 3.3V; 5V; 1.5,3.3,5
- Propagation Delay: 154
- Flip-Flop Type: D
- fMAX: 100
from Nexperia B.V.
The 74LVC1G175 is a low-power, low-voltage single positive edge triggered D-type flip-flop with individual data (D) input, clock (CP) input, master reset (MR) input, and Q output. The master reset (MR) is an asynchronous active LOW input and operates independently of the clock input. Information on... [See More]
- Supply Voltage: 1.8V; 2.5V; 3V; 3.3V; 3.6V; 5V; 1.65 - 5.5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Features: ESD Protection
from Texas Instruments
Quad D-Type Flip-Flops with Reset 16-SOIC -55 to 125 [See More]
- Supply Voltage: 1.5V; 3.3V; 5V; 1.5,3.3,5
- Propagation Delay: 139
- Flip-Flop Type: D
- fMAX: 100
from Nexperia B.V.
The 74LVC1G74 is a single positive edge triggered D-type flip-flop with individual data (D), clock (CP), set (SD) and reset (RD) inputs, and complementary Q and Q outputs. Data at the D-input that meets the set-up and hold time requirements on the LOW-to-HIGH clock transition will be stored in the... [See More]
- Supply Voltage: 1.8V; 2.5V; 3V; 3.3V; 3.6V; 5V; 1.65 - 5.5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Features: ESD Protection
from Texas Instruments
Octal D-Type Flip-Flops with Reset 20-PDIP -55 to 125 [See More]
- Supply Voltage: 1.5V; 3.3V; 5V; 1.5,3.3,5
- Propagation Delay: 154
- Flip-Flop Type: D
- fMAX: 100
from Nexperia B.V.
The 74LVC1G74 is a single positive edge triggered D-type flip-flop with individual data (D), clock (CP), set (SD) and reset (RD) inputs, and complementary Q and Q outputs. Data at the D-input that meets the set-up and hold time requirements on the LOW-to-HIGH clock transition will be stored in the... [See More]
- Supply Voltage: 1.8V; 2.5V; 3V; 3.3V; 3.6V; 5V; 1.65 - 5.5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Features: ESD Protection
from Texas Instruments
Octal D-Type Flip-Flops with 3-State Outputs 20-PDIP -55 to 125 [See More]
- Supply Voltage: 1.5V; 3.3V; 5V; 1.5,3.3,5
- Output Characteristics: 3-State
- Flip-Flop Type: D
- Propagation Delay: 123
from Nexperia B.V.
The 74LVC1G74 is a single positive edge triggered D-type flip-flop with individual data (D), clock (CP), set (SD) and reset (RD) inputs, and complementary Q and Q outputs. Data at the D-input that meets the set-up and hold time requirements on the LOW-to-HIGH clock transition will be stored in the... [See More]
- Supply Voltage: 1.8V; 2.5V; 3V; 3.3V; 3.6V; 5V; 1.65 - 5.5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Features: ESD Protection
from Texas Instruments
Octal D-Type Flip-Flops with 3-State Outputs 20-SOIC -55 to 125 [See More]
- Supply Voltage: 1.5V; 3.3V; 5V; 1.5,3.3,5
- Output Characteristics: 3-State
- Flip-Flop Type: D
- Propagation Delay: 123
from Nexperia B.V.
The 74LVC1G74 is a single positive edge triggered D-type flip-flop with individual data (D), clock (CP), set (SD) and reset (RD) inputs, and complementary Q and Q outputs. Data at the D-input that meets the set-up and hold time requirements on the LOW-to-HIGH clock transition will be stored in the... [See More]
- Supply Voltage: 1.8V; 2.5V; 3V; 3.3V; 3.6V; 5V; 1.65 - 5.5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Features: ESD Protection
from Texas Instruments
Octal Non-Inverting D-Type Flip-Flops with 3-State Outputs 20-PDIP -55 to 125 [See More]
- Supply Voltage: 1.5V; 3.3V; 5V; 1.5,3.3,5
- Output Characteristics: 3-State
- Flip-Flop Type: D
- Propagation Delay: 123
from Nexperia B.V.
The 74LVC1G74 is a single positive edge triggered D-type flip-flop with individual data (D), clock (CP), set (SD) and reset (RD) inputs, and complementary Q and Q outputs. Data at the D-input that meets the set-up and hold time requirements on the LOW-to-HIGH clock transition will be stored in the... [See More]
- Supply Voltage: 1.8V; 2.5V; 3V; 3.3V; 3.6V; 5V; 1.65 - 5.5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Features: ESD Protection
from Texas Instruments
Dual Positive-Edge-Triggered D-Type Flip-Flops with Set and Reset 14-PDIP -55 to 125 [See More]
- Supply Voltage: 1.5V; 3.3V; 5V; 1.5,3.3,5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Propagation Delay: 114
from Nexperia B.V.
The 74AHC1G79; 74AHCT1G79 is a single positive-edge triggered D - type flip-flop. Data at the D - input that meets the set-up and hold time requirements on the LOW-to-HIGH clock transition will be stored in the flip-flop and appear at the Q output. Inputs are... [See More]
- Supply Voltage: 2.5V; 3V; 3.3V; 3.6V; 5V; 2.0 - 5.5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Features: ESD Protection
from Texas Instruments
Dual Positive-Edge Triggered J-K Flip-Flops with Set and Reset 16-PDIP -55 to 125 [See More]
- Supply Voltage: 5V; 5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: J-K
- Propagation Delay: 11.1
from Nexperia B.V.
The 74AHC1G79; 74AHCT1G79 is a single positive-edge triggered D - type flip-flop. Data at the D - input that meets the set-up and hold time requirements on the LOW-to-HIGH clock transition will be stored in the flip-flop and appear at the Q output. Inputs are... [See More]
- Supply Voltage: 2.5V; 3V; 3.3V; 3.6V; 5V; 2.0 - 5.5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Features: ESD Protection
from Texas Instruments
Dual Negative-Edge Triggered J-K Flip-Flops with Set and Reset 16-SOIC -55 to 125 [See More]
- Supply Voltage: 5V; 5
- Triggering: Negative-edge Triggered
- Flip-Flop Type: J-K
- Propagation Delay: 11.1
from Nexperia B.V.
The 74AHC1G79; 74AHCT1G79 is a single positive-edge triggered D - type flip-flop. Data at the D - input that meets the set-up and hold time requirements on the LOW-to-HIGH clock transition will be stored in the flip-flop and appear at the Q output. Inputs are... [See More]
- Supply Voltage: 5V; 4.5 - 5.5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Features: ESD Protection
from Texas Instruments
Hex D-Type Flip-Flops with Reset 16-PDIP -55 to 125 [See More]
- Supply Voltage: 1.5V; 5V; 5
- Propagation Delay: 12.6
- Flip-Flop Type: D
- fMAX: 90
from Nexperia B.V.
The 74LVC1G79 is a single positive-edge triggered D-type flip-flop. Data at the D-input that meets the set-up and hold time requirements on the LOW-to-HIGH clock transition will be stored in the flip-flop and appear at the Q output. Inputs can be driven from either 3.3 V or 5 V devices. This feature... [See More]
- Supply Voltage: 1.8V; 2.5V; 3V; 3.3V; 3.6V; 5V; 1.65 - 5.5
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Features: ESD Protection
from Texas Instruments
Quad D-Type Flip-Flops with Reset 16-PDIP -55 to 125 [See More]
- Supply Voltage: 1.5V; 5V; 5
- Propagation Delay: 10.5
- Flip-Flop Type: D
- fMAX: 90
from Texas Instruments
Octal D-Type Flip-Flops with Reset 20-PDIP -55 to 125 [See More]
- Supply Voltage: 1.5V; 5V; 5
- Propagation Delay: 12.3
- Flip-Flop Type: D
- fMAX: 90
from Texas Instruments
Octal D-Type Flip-Flops with 3-State Outputs 20-PDIP -55 to 125 [See More]
- Supply Voltage: 5V; 5
- Output Characteristics: 3-State
- Flip-Flop Type: D
- Propagation Delay: 11.5
from Utmel Electronic Limited
16-Bit Edge-Triggered D-Type Flip-Flops with 3-State Output 48-SSOP -40 to 85 [See More]
- Supply Voltage: 5V; 5V
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Propagation Delay: 6.5
from Microchip Technology, Inc.
The SY10/100E131 are high-speed quad master slave D-type flip-flops with differential outputs designed for use in new, high-performance ECL systems. The flip-flops may be individually clocked by holding CC (Common Clock) at a logic LOW and then using the four individual CE (Clock Enable CE0-CE3)... [See More]
- Supply Voltage: 3.3V; 5V
- Logic Family: PECL
- fMAX: 750
from Lansdale Semiconductor, Inc.
The 54H00/74H00 logic family is high speed TTL III. These transistor-transistor logic circuits were designed for general purpose applications. They have good external noise immunity and high fan-out. [See More]
- Supply Voltage: 5V
- Triggering: Master-slave
- Flip-Flop Type: J-K
- Operating Temperature: -55 to 125
from Utmel Electronic Limited
20-Bit Bus-Interface D-Type Latches With 3-State Outputs 56-TSSOP -40 to 85 [See More]
- Supply Voltage: 5V; 5V
- Propagation Delay: 7.1
- Flip-Flop Type: D
- Low-level Output Current (Sink): 12
from Utmel Electronic Limited
D-TYPE LATCH, 74HC373, DIP20, 5V [See More]
- Supply Voltage: 5V; 5V
- Propagation Delay: 285
- Flip-Flop Type: D
- Low-level Output Current (Sink): 7.8
from Utmel Electronic Limited
Dual D-Type Positive-Edge-Triggered Flip-Flops With Clear and Preset 14-SSOP -40 to 85 [See More]
- Supply Voltage: 5V; 5V
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Propagation Delay: 28
from Utmel Electronic Limited
Dual Positive-Edge-Triggered D-Type Flip-Flops With Clear and Preset 14-SOIC -40 to 85 [See More]
- Supply Voltage: 5V; 5V
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Propagation Delay: 11
from Utmel Electronic Limited
Dual Positive-Edge-Triggered D-Type Flip-Flops With Preset And Clear 14-PDIP 0 to 70 [See More]
- Supply Voltage: 5V; 5V
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Propagation Delay: 9
from Utmel Electronic Limited
FAIRCHILD SEMICONDUCTOR MM74HCT574WMFlip-Flop, Tri State, Positive Edge, D, 18 ns, 60 MHz, 7.2 mA, SOIC, 20 Pins [See More]
- Supply Voltage: 5V; 5V
- Propagation Delay: 38
- Triggering: Positive-edge Triggered
- fMAX: 33
from Utmel Electronic Limited
FAIRCHILD SEMICONDUCTOR MM74HCT74MFlip-Flop, with Set and Reset,Complementary Output, Positive Edge, D, 21 ns, 50 MHz, 4.8 mA, SOIC [See More]
- Supply Voltage: 5V; 5V
- Propagation Delay: 35
- Triggering: Positive-edge Triggered
- fMAX: 27
from Utmel Electronic Limited
Flip Flop D-Type Bus Interface Pos-Edge 3-ST 1-Element 20-Pin SOIC Tube [See More]
- Supply Voltage: 5V; 5V
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Propagation Delay: 6.5
from Utmel Electronic Limited
Flip Flop D-Type Bus Interface Pos-Edge 3-ST 1-Element 20-Pin SSOP T/R [See More]
- Supply Voltage: 5V; 5V
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Propagation Delay: 10
from Utmel Electronic Limited
Flip Flop D-Type Bus Interface Pos-Edge 3-ST 1-Element 20-Pin TSSOP T/R [See More]
- Supply Voltage: 5V; 5V
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Propagation Delay: 12.5
from Utmel Electronic Limited
Flip Flop D-Type Bus Interface Pos-Edge 8-Element 20-Pin TSSOP [See More]
- Supply Voltage: 5V; 5V
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Propagation Delay: 11
from Utmel Electronic Limited
Flip Flop D-Type Pos-Edge 2-Element 14-Pin SOP T/R [See More]
- Supply Voltage: 5V; 5V
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Propagation Delay: 10.5
from Utmel Electronic Limited
Flip Flops Dual Pos-Edge-Trig J-K Flip-Flop [See More]
- Supply Voltage: 5V; 5V
- Propagation Delay: 8
- Triggering: Positive-edge Triggered
- fMAX: 150
from Utmel Electronic Limited
Flip Flops Octal Edge-Trig D-Ty F-F W/3-State Otpt [See More]
- Supply Voltage: 5V; 5V
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Propagation Delay: 265
from Utmel Electronic Limited
IC D-TYPE LATCH SGL 3-ST 20SOIC [See More]
- Supply Voltage: 5V; 5V
- Propagation Delay: 5.7
- Flip-Flop Type: D
- High-level Output Current (Source): -32
from Utmel Electronic Limited
IC D-TYPE LATCH SGL 3-ST 20SSOP [See More]
- Supply Voltage: 5V; 5V
- Propagation Delay: 47
- Flip-Flop Type: D
- Low-level Output Current (Sink): 6
from Utmel Electronic Limited
IC D-TYPE POS TRG DUAL 14TSSOP [See More]
- Supply Voltage: 5V; 5V
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Propagation Delay: 11
from Utmel Electronic Limited
IC D-TYPE POS TRG DUAL 48TVSOP [See More]
- Supply Voltage: 5V; 5V
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Propagation Delay: 10.4
from Utmel Electronic Limited
IC D-TYPE POS TRG SNGL 16SO [See More]
- Supply Voltage: 5V; 5V
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Propagation Delay: 25
from Utmel Electronic Limited
IC D-TYPE POS TRG SNGL 16SOIC [See More]
- Supply Voltage: 5V; 5V
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Propagation Delay: 500
from Utmel Electronic Limited
IC D-TYPE POS TRG SNGL 20SO [See More]
- Supply Voltage: 5V; 5V
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Propagation Delay: 160
from Utmel Electronic Limited
IC D-TYPE POS TRG SNGL 20TSSOP [See More]
- Supply Voltage: 5V; 5V
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Propagation Delay: 6.6
from Utmel Electronic Limited
IC D-TYPE POS TRG SNGL 20TSSOP [See More]
- Supply Voltage: 5V; 5V
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Propagation Delay: 9.2
from Utmel Electronic Limited
IC D-TYPE POS TRG SNGL 24SOIC [See More]
- Supply Voltage: 5V; 5V
- Triggering: Positive-edge Triggered
- Flip-Flop Type: D
- Propagation Delay: 6.2