Half-mortised Hinge Hinges (industrial)
from EMKA Incorporated
Steel, weld-on for flush doors [See More]
- Hinge Type: Half-mortised; Concealed; Weld-on
- Leaf Thickness: 0.1600
- Direction: Reversible
- Length: 2.4
from H.A. Guden Co., Inc.
1.00 X 1.00 X .050 X .093 PSWH MORTISE MOUNT W/SPUN ENDS [See More]
- Hinge Type: Butt; Half-mortised
- Length: 1
- Leaf Thickness: 0.0500
- Pin Diameter: 0.0930
from Hager Companies
ANSI A8212 - Non-rising removable pin with flush pin and plug - Reversible - For use on medium weight hollow metal doors with channel iron frames requiring medium frequency service [See More]
- Hinge Type: Half-mortised; Concealed
from EMKA Incorporated
Steel, weld-on for flush doors [See More]
- Hinge Type: Half-mortised; Concealed; Weld-on
- Leaf Thickness: 0.1600
- Direction: Reversible
- Length: 3.1
from H.A. Guden Co., Inc.
1.00 X 1.00 X .050 X .093 PSWH MORTISE MOUNT SPUN 1 END [See More]
- Hinge Type: Butt; Half-mortised
- Length: 1
- Leaf Thickness: 0.0500
- Pin Diameter: 0.0930
from Hager Companies
Certifications: - ANSI A156.26 Grade 1 for 150-pound doors Material: - 14 Ga. (0.075 " = 1.9 mm) Type 304 Stainless Steel Finish: - US32D Clearance: - 1/8 " (3.2 mm) hinge side - Plus standard lockside clearance Fasteners: - #10-24 x 5/8 " S/S Dril-Kwik (R) (metal door) - #1/4-20 x... [See More]
- Hinge Type: Half-mortised
from Hager Companies
Certifications: - ANSI A156.26 Grade 1 for 150-pound doors Material: - 14 Ga. (0.075 ' ' = 1.9mm) Type 304 Stainless Steel Finish: - US32D Satin Clearance: - 1/8 ' ' (3.2mm) hinge side - Plus standard lockside clearance Fasteners: - #10-24 x 5/8 ' ' S/S Dril-Kwick ®... [See More]
- Hinge Type: Half-mortised
from Hager Companies
ANSI A8211 - Four ball bearings - Non-rising removable pin with button tip and plug - Beveled surface leaf - Reversible [See More]
- Hinge Type: Half-mortised
from Hager Companies
Brass ANSI A2212 - Stainless Steel ANSI A5212 - Two ball bearings - Non-rising removable pin with button tip and plug - Beveled surface leaf - Reversible - For use on medium weight hollow metal doors with channel iron frames requiring medium frequency service [See More]
- Hinge Type: Half-mortised
from Hager Companies
For square edge doors - ANSI A8221 - Four ball bearings - Non-rising removable pin with button tip and plug - Reversible - For use in hospitals or other institutional type buildings [See More]
- Hinge Type: Half-mortised
from Hager Companies
ANSI A8233 - Non-rising removable pin with button tip and plug - Beveled surface leaf - Not for use with door closer - Reversible - For use on medium weight hollow metal doors with channel iron frames requiring low frequency service [See More]
- Hinge Type: Half-mortised
from Hager Companies
For square edge doors - ANSI A8221 - Non-rising removable pin with flush pin and plug - Reversible - For use in hospitals or other institutional type buildings [See More]
- Hinge Type: Half-mortised; Concealed
from Hager Companies
ANSI A8211 - Non-rising removable pin with flush pin and plug - Reversible - For use on heavy weight hollow metal doors with channel iron frames requiring high frequency service [See More]
- Hinge Type: Half-mortised; Concealed