Stainless Steel Hinges (industrial)
from Magnus Mobility Systems, Inc.
Magnus has chosen to partner with Fath, Inc. as its supplier of hinges, fittings, leveling feet, t-slot nuts, and other accessories for aluminum profile systems. Fath manufacturers no fewer than 147 versions of combi-hinges, standard with a stainless steel central pin, even more when you consider... [See More]
- Leaf Material: Die-Cast Zinc (SS Pin)
- Direction: Reversible
- Hinge Type: Butt
- Hole Type: Round
from Reid Supply
Concealed hinges are not visible from the outside of a door or panel and therefore provide a clean profile and tamper resistance. . HG-9201 [See More]
- Leaf Material: Stainless Steel; Stainless Steel (SS Pin, Stainless Steel)
- Direction: Reversible
- Hinge Type: Concealed
- Leaf Thickness: 0.0590
from Eberhard Mfg. Company
3.5" long x 1.5" wide strap [See More]
- Leaf Material: Stainless Steel (SS Pin)
- Direction: Reversible
- Hinge Type: Strap (Unequal Leaves)
- Length: 3.13
from Monroe Engineering
High impact strength polyamide-based (PA) technopolymer. Resistant to solvents, oil, greases and other chemical agents. Black color with matte finish. AISI 303 stainless steel rotation pin. Fitting by means of: 2 pairs of nickel-plated brass bushings with tapped hole. 2 pairs of nickel-plated steel... [See More]
- Leaf Material: Plastic (SS Pin)
- Direction: Reversible
- Hinge Type: Continuous
- Length: 1.56
from H.A. Guden Co., Inc.
1.5 X 1.5 X .050 X .120 AL NH STS PIN SPUN [See More]
- Leaf Material: Aluminum; Stainless Steel; Aluminum with Stainless Pin (SS Pin, Aluminum with Stainless Pin)
- Leaf Thickness: 0.0500
- Hinge Type: Butt
- Length: 1.5
from EMKA Incorporated
Heavy Duty stainless for flush doors [See More]
- Leaf Material: Stainless Steel (SS Pin)
- Direction: Reversible
- Hinge Type: Adjustable Hinge
- Hole Type: Round
from Magnus Mobility Systems, Inc.
Magnus has chosen to partner with Fath, Inc. as its supplier of hinges, fittings, leveling feet, t-slot nuts, and other accessories for aluminum profile systems. Fath manufacturers no fewer than 147 versions of combi-hinges, standard with a stainless steel central pin, even more when you consider... [See More]
- Leaf Material: Die-Cast Zinc (SS Pin)
- Direction: Reversible
- Hinge Type: Butt
- Hole Type: Round
from Reid Supply
Concealed hinges are not visible from the outside of a door or panel and therefore provide a clean profile and tamper resistance. . HG-9233 [See More]
- Leaf Material: Stainless Steel; Stainless Steel (SS Pin, Stainless Steel)
- Direction: Right Hand
- Hinge Type: Concealed
- Leaf Thickness: 0.0390
from Monroe Engineering
High impact strength polyamide-based (PA) technopolymer. Resistant to solvents, oil, greases and other chemical agents. Black standard color with matte finish. AISI 303 stainless steel rotation pin. Fitting by means of: 2 pairs of through holes for countersunk head screws M6. 2 pairs of referring... [See More]
- Leaf Material: Plastic (SS Pin)
- Direction: Reversible
- Hinge Type: Continuous
- Length: 4.29
from H.A. Guden Co., Inc.
9290 CONCEALED HINGE ALUMINUM NO HOLES STS PIN [See More]
- Leaf Material: Aluminum; Stainless Steel; Aluminum with Stainless Pin (SS Pin, Aluminum with Stainless Pin)
- Leaf Thickness: 0.0750
- Hinge Type: Concealed
- Length: 0.8000
from EMKA Incorporated
For 20mm door return 316 stainless [See More]
- Leaf Material: Stainless Steel (SS Pin)
- Direction: Reversible
- Hinge Type: Overlay; Pin
- Length: 1.2
from Magnus Mobility Systems, Inc.
Magnus has chosen to partner with Fath, Inc. as its supplier of hinges, fittings, leveling feet, t-slot nuts, and other accessories for aluminum profile systems. Fath manufacturers no fewer than 147 versions of combi-hinges, standard with a stainless steel central pin, even more when you consider... [See More]
- Leaf Material: Fiberglass-Reinforced Nylon (SS Pin)
- Hole Type: Round
- Hinge Type: Butt (Unequal Leaves)
- Number of Holes: 4
from Reid Supply
Concealed hinges are not visible from the outside of a door or panel and therefore provide a clean profile and tamper resistance. . HG-9263 [See More]
- Leaf Material: Stainless Steel; Stainless Steel (SS Pin, Stainless Steel)
- Leaf Thickness: 0.1260
- Hinge Type: Concealed
- Length: 2.88
from Monroe Engineering
The hinge is made up of two parts of different size (one is large and the other is narrow) to use on structures with thin doors. High impact strength special technopolymer in black color with matte finish surfaces. Resistant to solvents, oil, greases and other chemical agents. AISI 303 stainless... [See More]
- Leaf Material: Plastic (SS Pin)
- Direction: Reversible
- Hinge Type: Continuous
- Length: 1.2
from H.A. Guden Co., Inc.
9291 CONCEALED HINGE ALUMINUM NO HOLES STS PIN [See More]
- Leaf Material: Aluminum; Stainless Steel; Aluminum with Stainless Pin (SS Pin, Aluminum with Stainless Pin)
- Leaf Thickness: 0.0900
- Hinge Type: Concealed
- Length: 1.25
from EMKA Incorporated
zinc alloy, screw-on for surface mounted doors [See More]
- Leaf Material: Zinc Alloy (SS Pin)
- Direction: Reversible
- Hinge Type: Pin
- Leaf Thickness: 0.1800
from Magnus Mobility Systems, Inc.
Magnus has chosen to partner with Fath, Inc. as its supplier of hinges, fittings, leveling feet, t-slot nuts, and other accessories for aluminum profile systems. Fath manufacturers no fewer than 147 versions of combi-hinges, standard with a stainless steel central pin, even more when you consider... [See More]
- Leaf Material: Fiberglass-Reinforced Nylon (SS Pin)
- Hole Type: Round
- Hinge Type: Butt
- Number of Holes: 3
from Reid Supply
Concealed hinges are not visible from the outside of a door or panel and therefore provide a clean profile and tamper resistance. . SC-661 [See More]
- Leaf Material: Steel; Steel (SS Pin, Stainless Steel)
- Leaf Thickness: 0.0590
- Hinge Type: Concealed
- Length: 4.96
from Monroe Engineering
High impact strength special technopolymer in black color with matte finish surfaces. Resistant to solvents, oil, greases and other chemical agents. AISI 303 stainless steel rotation stud pin. Fitting by means of: 2 pairs of nickel-plated brass bushings with tapped hole. 2 pairs of nickel-plated... [See More]
- Leaf Material: Plastic (SS Pin)
- Direction: Reversible
- Hinge Type: Continuous
- Length: 1.2
from H.A. Guden Co., Inc.
9290 CONCEALED HINGE ALUMINUM WITH HOLES STS PIN [See More]
- Leaf Material: Aluminum; Stainless Steel; Aluminum with Stainless Pin (SS Pin, Aluminum with Stainless Pin)
- Leaf Thickness: 0.0750
- Hinge Type: Concealed
- Length: 0.8000
from EMKA Incorporated
Butt type hinge, zinc alloy with offset [See More]
- Leaf Material: Zinc Alloy (SS Pin)
- Leaf Thickness: 0.3000
- Direction: Reversible
- Length: 2.4
from Magnus Mobility Systems, Inc.
Magnus has chosen to partner with Fath, Inc. as its supplier of hinges, fittings, leveling feet, t-slot nuts, and other accessories for aluminum profile systems. Fath manufacturers no fewer than 147 versions of combi-hinges, standard with a stainless steel central pin, even more when you consider... [See More]
- Leaf Material: Fiberglass-Reinforced Nylon (SS Pin)
- Hole Type: Round
- Hinge Type: Butt
- Number of Holes: 2
from Reid Supply
Lift-Off Hinge for Structural SystemsLift-Off Flag Hinges - Screw on are a two part rolled steel body with round end caps. Ideal for screw on frame for more industrial unitsMetal in-line Lift Off Hinges are easy lift off for flush mounted doors. They have a hinge rotation angle of 180 degree.Metal... [See More]
- Leaf Material: Stainless Steel; Stainless Steel (SS Pin, Stainless Steel)
- Pin Diameter: 0.1870
- Length: 2
- Open Width: 1.68
from Monroe Engineering
High impact strength special technopolymer in black color with matte finish surfaces. Resistant to solvents, oil, greases and other chemical agents. AISI 303 stainless steel rotation pin. Fitting by means of: 2 pairs of nickel-plated brass bushings with tapped hole. 2 pairs of nickel-plated steel... [See More]
- Leaf Material: Plastic (SS Pin)
- Direction: Reversible
- Hinge Type: Continuous
- Length: 1.2
from H.A. Guden Co., Inc.
9291 CONCEALED HINGE ALUMINUM WITH HOLES STS PIN [See More]
- Leaf Material: Aluminum; Stainless Steel; Aluminum with Stainless Pin (SS Pin, Aluminum with Stainless Pin)
- Leaf Thickness: 0.0900
- Hinge Type: Concealed
- Length: 1.25
from EMKA Incorporated
Low cost assembly, flush or surface mounted doors [See More]
- Leaf Material: Zinc Alloy (SS Pin)
- Direction: Left Hand
- Hinge Type: Overlay (optional feature)
- Leaf Thickness: 0.2500
from Magnus Mobility Systems, Inc.
Magnus has chosen to partner with Fath, Inc. as its supplier of hinges, fittings, leveling feet, t-slot nuts, and other accessories for aluminum profile systems. Fath manufacturers no fewer than 147 versions of combi-hinges, standard with a stainless steel central pin, even more when you consider... [See More]
- Leaf Material: Fiberglass-Reinforced Nylon (SS Pin)
- Hole Type: Round
- Hinge Type: Butt
- Number of Holes: 2
from Reid Supply
Metal Torque Hinges allow the control of the opening and the closure of a door. The torque adjustment can be achieve with the aid of a setting key or with the adjustment of a screw.Heavy Duty Adjustable Torque Hinges have an adjustable holding torque with the aid of a setting key. The hinge... [See More]
- Leaf Material: Plastic; Acetal (SS Pin, Stainless Steel)
- Leaf Thickness: 0.2000
- Hinge Type: Constant Torque Friction Hinge; Friction Hinges
- Length: 1.2
from Monroe Engineering
Fitting by means of 2 pairs of through holes for cylindrical head screwsHigh impact strength special technopolymer in black color with matte finish surfaces. Resistant to solvents, oil, greases and other chemical agents. AISI 303 stainless steel rotation stud pin. Rotation angle: max 270 °,... [See More]
- Leaf Material: Plastic (SS Pin)
- Direction: Reversible
- Hinge Type: Continuous
- Length: 1.97
from H.A. Guden Co., Inc.
1.00 X.025 X.062 X 72.00 ALNH .25 JT STS PIN STAKED [See More]
- Leaf Material: Aluminum; Stainless Steel; Aluminum leaf Stainless pin (SS Pin, Aluminum leaf Stainless pin)
- Leaf Thickness: 0.0250
- Hinge Type: Continuous
- Length: 72
from EMKA Incorporated
For door return of <18mm [See More]
- Leaf Material: Zinc Alloy (SS Pin)
- Direction: Reversible
- Hinge Type: Overlay
- Length: 1.8
from Magnus Mobility Systems, Inc.
Magnus has chosen to partner with Fath, Inc. as its supplier of hinges, fittings, leveling feet, t-slot nuts, and other accessories for aluminum profile systems. Fath manufacturers no fewer than 147 versions of combi-hinges, standard with a stainless steel central pin, even more when you consider... [See More]
- Leaf Material: Fiberglass-Reinforced Nylon (SS Pin)
- Direction: Left Hand
- Hinge Type: Butt (Unequal Leaves)
- Hole Type: Round
from Reid Supply
Metal Torque Hinges allow the control of the opening and the closure of a door. The torque adjustment can be achieve with the aid of a setting key or with the adjustment of a screw.Heavy Duty Adjustable Torque Hinges have an adjustable holding torque with the aid of a setting key. The hinge... [See More]
- Leaf Material: Plastic; Acetal (SS Pin, Stainless Steel)
- Leaf Thickness: 0.2300
- Hinge Type: Constant Torque Friction Hinge; Friction Hinges
- Length: 1.69
from Monroe Engineering
High impact strength special technopolymer in black color with matte finish surfaces. Resistant to solvents, oil, greases and other chemical agents. AISI 303 stainless steel rotation pin. Fitting by means of: 2 pairs of nickel-plated brass bushings with tapped hole. 2 pairs of nickel-plated steel... [See More]
- Leaf Material: Plastic (SS Pin)
- Direction: Reversible
- Hinge Type: Continuous
- Length: 1.97
from H.A. Guden Co., Inc.
1.50 X .72 X.050 X.120 ALUM ALUM NO HOLES LH MALE STSPIN [See More]
- Leaf Material: Aluminum; Stainless Steel; Aluminum with Stainless Pin (SS Pin, Aluminum with Stainless Pin)
- Leaf Thickness: 0.0500
- Hinge Type: Slip Joint
- Length: 1.5
from EMKA Incorporated
2" Powder coated zinc alloy butt hinge [See More]
- Leaf Material: Plastic (optional feature); Zinc Alloy (SS Pin)
- Direction: Reversible
- Hinge Type: Butt
- Leaf Thickness: 0.2500
from Magnus Mobility Systems, Inc.
Magnus has chosen to partner with Fath, Inc. as its supplier of hinges, fittings, leveling feet, t-slot nuts, and other accessories for aluminum profile systems. Fath manufacturers no fewer than 147 versions of combi-hinges, standard with a stainless steel central pin, even more when you consider... [See More]
- Leaf Material: Fiberglass-Reinforced Nylon (SS Pin)
- Direction: Reversible
- Hinge Type: Butt
- Hole Type: Round
from Reid Supply
Metal Torque Hinges allow the control of the opening and the closure of a door. The torque adjustment can be achieve with the aid of a setting key or with the adjustment of a screw.Heavy Duty Adjustable Torque Hinges have an adjustable holding torque with the aid of a setting key. The hinge... [See More]
- Leaf Material: Stainless Steel; Stainless Steel (SS Pin, Stainless Steel)
- Leaf Thickness: 0.3300
- Hinge Type: Constant Torque Friction Hinge; Friction Hinges
- Length: 1.57
from H.A. Guden Co., Inc.
1.50 X .72 X.050 X.120 ALUM ALUM NO HOLES RH MALE STS PIN [See More]
- Leaf Material: Aluminum; Stainless Steel; Aluminum with Stainless Pin (SS Pin, Aluminum with Stainless Pin)
- Leaf Thickness: 0.0500
- Hinge Type: Slip Joint
- Length: 1.5
from EMKA Incorporated
2 3/8" zinc alloy butt hinge with threaded studs [See More]
- Leaf Material: Plastic (optional feature); Zinc Alloy (SS Pin)
- Direction: Reversible
- Hinge Type: Butt
- Leaf Thickness: 0.3000
from Magnus Mobility Systems, Inc.
Magnus has chosen to partner with Fath, Inc. as its supplier of hinges, fittings, leveling feet, t-slot nuts, and other accessories for aluminum profile systems. Fath manufacturers no fewer than 147 versions of combi-hinges, standard with a stainless steel central pin, even more when you consider... [See More]
- Leaf Material: Fiberglass-Reinforced Nylon (SS Pin)
- Direction: Reversible
- Hinge Type: Butt
- Hole Type: Round
from H.A. Guden Co., Inc.
2.00 X .84 X.080 X.187 ALUM ALUM NO HOLES LH MALE STS PIN [See More]
- Leaf Material: Aluminum; Stainless Steel; Aluminum with Stainless Pin (SS Pin, Aluminum with Stainless Pin)
- Leaf Thickness: 0.0800
- Hinge Type: Slip Joint
- Length: 2
from EMKA Incorporated
1 1/2"GR nylon butt hinge [See More]
- Leaf Material: Plastic (SS Pin)
- Direction: Reversible
- Hinge Type: Butt
- Leaf Thickness: 0.2000
from Magnus Mobility Systems, Inc.
Magnus has chosen to partner with Fath, Inc. as its supplier of hinges, fittings, leveling feet, t-slot nuts, and other accessories for aluminum profile systems. Fath manufacturers no fewer than 147 versions of combi-hinges, standard with a stainless steel central pin, even more when you consider... [See More]
- Leaf Material: Fiberglass-Reinforced Nylon (SS Pin)
- Direction: Reversible
- Hinge Type: Butt
- Hole Type: Round
from H.A. Guden Co., Inc.
2.00 X .84 X.080 X.187 ALUM ALUM NO HOLES RH MALE STS PIN [See More]
- Leaf Material: Aluminum; Stainless Steel; Aluminum with Stainless Pin (SS Pin, Aluminum with Stainless Pin)
- Leaf Thickness: 0.0800
- Hinge Type: Slip Joint
- Length: 2
from EMKA Incorporated
For offset flush door [See More]
- Leaf Material: Zinc Alloy (SS Pin)
- Leaf Thickness: 0.2500
- Direction: Reversible
- Length: 2.4
from Magnus Mobility Systems, Inc.
Magnus has chosen to partner with Fath, Inc. as its supplier of hinges, fittings, leveling feet, t-slot nuts, and other accessories for aluminum profile systems. Fath manufacturers no fewer than 147 versions of combi-hinges, standard with a stainless steel central pin, even more when you consider... [See More]
- Leaf Material: Fiberglass-Reinforced Nylon (SS Pin)
- Direction: Reversible
- Hinge Type: Butt (Unequal Leaves)
- Hole Type: Round
from H.A. Guden Co., Inc.
1.50 X .72 X.050 X.120 ALUM WITH HOLES LEFT MALE STS PIN [See More]
- Leaf Material: Aluminum; Stainless Steel; Aluminum with Stainless Pin (SS Pin, Aluminum with Stainless Pin)
- Leaf Thickness: 0.0500
- Hinge Type: Slip Joint
- Length: 1.5
from EMKA Incorporated
1 1/2" zinc alloy butt hinge [See More]
- Leaf Material: Stainless Steel (SS Pin)
- Direction: Reversible
- Hinge Type: Lift-off Hinge
- Hole Type: Round
from Magnus Mobility Systems, Inc.
Magnus has chosen to partner with Fath, Inc. as its supplier of hinges, fittings, leveling feet, t-slot nuts, and other accessories for aluminum profile systems. Fath manufacturers no fewer than 147 versions of combi-hinges, standard with a stainless steel central pin, even more when you consider... [See More]
- Leaf Material: Fiberglass-Reinforced Nylon (SS Pin)
- Direction: Reversible
- Hinge Type: Butt (Unequal Leaves)
- Hole Type: Round
from H.A. Guden Co., Inc.
1.50 X .72 X.050 X.120 ALUM WITH HOLES RH MALE STSPIN [See More]
- Leaf Material: Aluminum; Stainless Steel; Aluminum with Stainless Pin (SS Pin, Aluminum with Stainless Pin)
- Leaf Thickness: 0.0500
- Hinge Type: Slip Joint
- Length: 1.5
from EMKA Incorporated
For in-line cabinets for 25 mm door return [See More]
- Leaf Material: Zinc Alloy (SS Pin)
- Direction: Reversible
- Hinge Type: Overlay; Slip Joint
- Leaf Thickness: 0.1600
from Magnus Mobility Systems, Inc.
Magnus has chosen to partner with Fath, Inc. as its supplier of hinges, fittings, leveling feet, t-slot nuts, and other accessories for aluminum profile systems. Fath manufacturers no fewer than 147 versions of combi-hinges, standard with a stainless steel central pin, even more when you consider... [See More]
- Leaf Material: Fiberglass-Reinforced Nylon (SS Pin)
- Direction: Reversible
- Hinge Type: Butt (Unequal Leaves)
- Hole Type: Round
from H.A. Guden Co., Inc.
2.00 X .84 X.080 X.187 ALUM WITH HOLES LEFT MALE STS PIN [See More]
- Leaf Material: Aluminum; Stainless Steel; Aluminum with Stainless Pin (SS Pin, Aluminum with Stainless Pin)
- Leaf Thickness: 0.0800
- Hinge Type: Slip Joint
- Length: 2
from EMKA Incorporated
For flush door, stainless, weld-on [See More]
- Leaf Material: Stainless Steel (SS Pin)
- Direction: Reversible
- Hinge Type: Concealed; Pin; Weld-on
- Length: 2.4
from Magnus Mobility Systems, Inc.
Magnus has chosen to partner with Fath, Inc. as its supplier of hinges, fittings, leveling feet, t-slot nuts, and other accessories for aluminum profile systems. Fath manufacturers no fewer than 147 versions of combi-hinges, standard with a stainless steel central pin, even more when you consider... [See More]
- Leaf Material: Fiberglass-Reinforced Nylon (SS Pin)
- Hole Type: Round
- Hinge Type: Butt (Unequal Leaves)
- Number of Holes: 2
from H.A. Guden Co., Inc.
2.00 X .84 X.080 X.187 ALUM WITH HOLES RIGHT MALE STS PIN [See More]
- Leaf Material: Aluminum; Stainless Steel; Aluminum with Stainless Pin (SS Pin, Aluminum with Stainless Pin)
- Leaf Thickness: 0.0800
- Hinge Type: Slip Joint
- Length: 2
from EMKA Incorporated
For flush doors [See More]
- Leaf Material: Stainless Steel (SS Pin)
- Direction: Reversible
- Hinge Type: Concealed; Weld-on
- Length: 3.1
from Magnus Mobility Systems, Inc.
Magnus has chosen to partner with Fath, Inc. as its supplier of hinges, fittings, leveling feet, t-slot nuts, and other accessories for aluminum profile systems. Fath manufacturers no fewer than 147 versions of combi-hinges, standard with a stainless steel central pin, even more when you consider... [See More]
- Leaf Material: Fiberglass-Reinforced Nylon (SS Pin)
- Hole Type: Round
- Hinge Type: Butt (Unequal Leaves)
- Number of Holes: 4
from H.A. Guden Co., Inc.
3.50LG X1.50WD X.040 X.091 WH AL SPRING HINGE OPEN STS PIN [See More]
- Leaf Material: Aluminum; Stainless Steel; Aluminum with Stainless Pin (SS Pin, Aluminum with Stainless Pin)
- Leaf Thickness: 0.0400
- Hinge Type: Spring
- Length: 3.5
from EMKA Incorporated
Zinc alloy, for 20mm door return, very quick assembly [See More]
- Leaf Material: Zinc Alloy (SS Pin)
- Direction: Reversible
- Hinge Type: Overlay
- Leaf Thickness: 0.0800
from Magnus Mobility Systems, Inc.
Magnus has chosen to partner with Fath, Inc. as its supplier of hinges, fittings, leveling feet, t-slot nuts, and other accessories for aluminum profile systems. Fath manufacturers no fewer than 147 versions of combi-hinges, standard with a stainless steel central pin, even more when you consider... [See More]
- Leaf Material: Fiberglass-Reinforced Nylon (SS Pin)
- Hole Type: Round
- Hinge Type: Butt
- Number of Holes: 2
from H.A. Guden Co., Inc.
3.50LG X1.50WD X.040 X.091 WH AL SPRING HINGE CLOSED STS PIN [See More]
- Leaf Material: Aluminum; Stainless Steel; Aluminum with Stainless Pin (SS Pin, Aluminum with Stainless Pin)
- Leaf Thickness: 0.0400
- Hinge Type: Spring
- Length: 3.5
from EMKA Incorporated
Screw-on hinge zinc alloy [See More]
- Leaf Material: Steel; Zinc Die (SS Pin)
- Direction: Reversible
- Hinge Type: Overlay
- Length: 3.54
from Magnus Mobility Systems, Inc.
Magnus has chosen to partner with Fath, Inc. as its supplier of hinges, fittings, leveling feet, t-slot nuts, and other accessories for aluminum profile systems. Fath manufacturers no fewer than 147 versions of combi-hinges, standard with a stainless steel central pin, even more when you consider... [See More]
- Leaf Material: Fiberglass-Reinforced Nylon (SS Pin)
- Hole Type: Round
- Hinge Type: Butt
- Number of Holes: 2
from H.A. Guden Co., Inc.
3.50LG X1.50WD X.040 X.091 NH AL SPRING HINGE OPEN STS PIN [See More]
- Leaf Material: Aluminum; Stainless Steel; Aluminum with Stainless Pin (SS Pin, Aluminum with Stainless Pin)
- Leaf Thickness: 0.0400
- Hinge Type: Spring
- Length: 3.5
from EMKA Incorporated
GR nylon screw-on hinge also stainless version 1079-U5-PH [See More]
- Leaf Material: Plastic; GR nylon (SS Pin)
- Direction: Reversible
- Hinge Type: Overlay
- Length: 3.7
from H.A. Guden Co., Inc.
WELD-ON HINGE 1.58" OVERALL ALUMINUM, FIXED STS PIN (W8) [See More]
- Leaf Material: Aluminum; Stainless Steel; Aluminum with Stainless Pin (SS Pin, Aluminum with Stainless Pin)
- Pin Diameter: 0.1970
- Hinge Type: Weld-on
from EMKA Incorporated
High strength block hinges [See More]
- Leaf Material: Stainless Steel (SS Pin)
- Direction: Reversible
- Hinge Type: Slip Joint
- Length: 2
from H.A. Guden Co., Inc.
WELD-ON HINGE 5.91" OVERALL ALUMINUM, FIXED STS PIN (W20) [See More]
- Leaf Material: Aluminum; Stainless Steel; Aluminum with Stainless Pin (SS Pin, Aluminum with Stainless Pin)
- Pin Diameter: 0.5000
- Hinge Type: Weld-on
from EMKA Incorporated
Butt hinge 316 Stainless [See More]
- Leaf Material: Stainless Steel; 316 (SS Pin)
- Direction: Reversible
- Hinge Type: Butt
- Leaf Thickness: 0.3150
from H.A. Guden Co., Inc.
WELD-ON HINGE 5.03" OVERALL STEEL, FIXED STAINLESS PIN [See More]
- Leaf Material: Steel; Stainless Steel; Plain Steel with Stainless Pin (SS Pin, Plain Steel with Stainless Pin)
- Pin Diameter: 0.3920
- Hinge Type: Weld-on
from EMKA Incorporated
Lift-off with security lugs, very low cost installation for 26mm door returns [See More]
- Leaf Material: Zinc Alloy (SS Pin)
- Direction: Right Hand
- Hinge Type: Overlay; Slip Joint
- Leaf Thickness: 0.1600
from H.A. Guden Co., Inc.
WELD-ON HINGE 5.91" OVERALL STEEL, FIXED STAINLESS PIN W20 [See More]
- Leaf Material: Steel; Stainless Steel; Plain Steel with Stainless Pin (SS Pin, Plain Steel with Stainless Pin)
- Pin Diameter: 0.5000
- Hinge Type: Weld-on
from EMKA Incorporated
Lift-off with security lugs, very low cost installation for 20mm door returns [See More]
- Leaf Material: Zinc Alloy (SS Pin)
- Direction: Right Hand
- Hinge Type: Overlay; Slip Joint
- Leaf Thickness: 0.0800
from EMKA Incorporated
Stainless weld-on hinge [See More]
- Leaf Material: Stainless Steel (SS Pin)
- Direction: Reversible
- Hinge Type: Overlay; Weld-on
- Length: 1.6