Stainless Steel Drains and Drain Systems
from Sugatsune America, Inc.
Sold Separately Hose:AE-DH4540-1(Below), Strainer:AE-DH020K-45(P.796) [See More]
- Body Material: Stainless
from Sugatsune America, Inc.
Sold Separately Hose:AE-DH4540-1(Below), Strainer:AE-DH020K-45(P.796) [See More]
- Body Material: Stainless
from Sugatsune America, Inc.
Sold Separately Hose:AE-DH4540-1(Below), Strainer:AE-DH020K-45(P.796) [See More]
- Body Material: Stainless
from Sugatsune America, Inc.
Sold Separately Hose:AE-DH4540-1(Below), Strainer:AE-DH020K-45(P.796) [See More]
- Body Material: Stainless
from Armstrong International
Fixed Pivot Ball Float Drain Traps. For loads to 3,900 lb/hr (1769 kg/hr) . . . Pressures to 600 psig (41 bar). Continuous flow or on-off float drain traps. Armstrong ’s line of fixed lever drain traps includes two basic models available in cast iron and forged steel. The floats are light... [See More]
- Body Material: Stainless
- Connection Size: 0.5 to 0.8
- Drain Type: Condensate
- Shape: Round
from Mid-America Fittings, Inc.
Sink strainer & plug [See More]
- Body Material: Stainless
- Shape: Round
- Drain Type: Sink
from Eric'sons Dura Trench
10 inch wide stainless trench drain. 10 ″ wide interior trench drain. Can be sloped from 3 ″ to 12 ″ deep typical (contact us for pricing and availability on deeper depths). Typically used for flows up to 8.8 cfs (3,900 gpm). Comes complete with installation brackets, plywood... [See More]
- Body Material: Stainless
- Strainer Size: 10.0
- Drain Type: Trench
from Watts
Watts Drainage FS-780 12 in. (305mm) square x 6 in. (152mm) deep 14ga. type 304 stainless steel sanitary floor sink with loose set cast stainless steel grate, dome bottom strainer, and no hub (standard) outlet. [See More]
- Body Material: Stainless
- Strainer Size: 12.0
- Drain Type: Sanitary
- Shape: Square/Rect
from StainlessDrains.com
Grate: Heavy Duty 1/4" plate Slotted. Outlet Location: Center. Outside Diameter: 8.5in. Start Depth: 4in. Throat Size: 4.5in [See More]
- Body Material: Stainless
- Strainer Size: 6.0
- Drain Type: Trench
- Connection Size: 2.0
from JORC Industrial LLC
OPTIMUM-HP Drain Assembly consists of a solid-state timer coupled to a solenoid valve and only requires a simple installation procedure. The unit is suitable for ALL compressed air system components (aftercoolers, dryers, filters, pressure vessels and piping), regardless of their size or capacity -... [See More]
- Body Material: Stainless
- Strainer Size: 0.0
- Drain Type: Condensate
- Connection Size: 0.2
from Zurn Industries LLC
12" Fabricated Stainless Steel Linear Shower Drain with 2" No-Hub center outlet, and linear slotted heel-proof grate. To view all options, see the Specification Sheet - ZS880. Features And Benefits. Linear Slotted Heel-Proof Grate. Vertically adjustable anchoring support legs, and low-profile... [See More]
- Body Material: Stainless
- Connection Size: 12.0
- Drain Type: Bath / Shower
from Galco Industrial Electronics
CH MYERS 1/2 STAINLESS STEEL DRAIN PLUG [See More]
- Body Material: Stainless
from Armstrong International
Snap Action Ball Float Drain Traps. For loads to 1,950 lb/hr (885 kg/hr) . . . Pressures to 1,000 psig (69 bar). Continuous flow or on-off float drain traps. Armstrong ’s line of snap action drain traps includes two basic models available in cast iron and forged steel. The floats are light... [See More]
- Body Material: Stainless
- Connection Size: 0.8 to 1.5
- Drain Type: Condensate
- Shape: Round
from Eric'sons Dura Trench
12 inch Industrial Floor Drain. 12 ″ x 12 ″ Industrial & Food grade floor drain. Drain top is 1/2 ″ thick rated for forklift traffic. Interior drain body has smooth large radii corners for easy sanitation and is 9 ″ deep. Drain comes with large internal debris basket... [See More]
- Body Material: Stainless
- Strainer Size: 12.0
- Drain Type: Floor
from Watts
Watts Drainage Products FS-790 12 in. (305mm) square x 8 in. (203mm) deep 14ga. type 304 stainless steel sanitary floor sink with loose set cast stainless steel grate, dome bottom strainer, and no hub (standard) outlet. [See More]
- Body Material: Stainless
- Strainer Size: 12.0
- Drain Type: Sanitary
- Shape: Square/Rect
from StainlessDrains.com
Grate: Heavy Duty 1/4" plate Slotted. Outlet Location: End. Outside Diameter: 8.5in. Start Depth: 4in. Throat Size: 4.5in [See More]
- Body Material: Stainless
- Strainer Size: 6.0
- Drain Type: Trench
- Connection Size: 2.0
from JORC Industrial LLC
The OPTIMUM-S Drain Assembly consists of a solid-state timer coupled to a solenoid valve and only requires a simple installation procedure. The unit is suitable for ALL compressed air system components (aftercoolers, dryers, filters, pressure vessels and piping), regardless of their size or capacity... [See More]
- Body Material: Stainless
- Connection Size: 0.2
- Drain Type: Condensate
- Shape: Round
from Zurn Industries LLC
5" round floor drain features stainless steel strainer and ABS body with 2" x 3" solvent weld connection. Comes standard with integral light-duty strainer, stainless steel deck plate, and protective label for grate. Features And Benefits. Ideal for floor and shower drain applications. Comes standard... [See More]
- Body Material: Stainless
- Connection Size: 5.0
- Drain Type: Floor
- Features: Adjustable
from Galco Industrial Electronics
Breather/Drain, M20, Stainless Steel [See More]
- Body Material: Stainless
from Armstrong International
Free-Floating Guided Lever Drain Traps. For loads to 49,000 lb/hr (22226 kg/hr) . . . Pressures to 300 psig (21 bar). Armstrong ’s cast iron, free-floating guided lever drain traps use the same bodies, caps, lever mechanisms, valves and seats of Armstrong inverted bucket steam traps that have... [See More]
- Body Material: Stainless
- Connection Size: 0.5
- Drain Type: Condensate
- Shape: Round
from Eric'sons Dura Trench
12 inch wide stainless trench drain. 12 ″ wide interior trench drain can be sloped from 3 ″ to 12 ″ deep typical. Typically used for flows up to 11.8 cfs (5,275 gpm). Comes complete with installation brackets, plywood covers, end plates and outlets. Accepts any of the 14 ″... [See More]
- Body Material: Stainless
- Strainer Size: 12.0
- Drain Type: Trench
from Watts
Watts Drainage TD-300 Elevator Trench Drain with 11-3/4" (298) wide x (specify) long 12 ga. type 304 stainless steel body, heel proof and ADA compliant load class B stainless steel grating with grate open area of 65 sq. in. per foot is secured with vandal-proof stainless steel screws, and 4" (110)... [See More]
- Body Material: Stainless
- Strainer Size: 36.0 to 96.0
- Drain Type: Trench
- Shape: Square/Rect
from JORC Industrial LLC
The OPTIMUM-S Drain Assembly consists of a solid-state timer coupled to a solenoid valve and only requires a simple installation procedure. The unit is suitable for ALL compressed air system components (aftercoolers, dryers, filters, pressure vessels and piping), regardless of their size or capacity... [See More]
- Body Material: Stainless
- Strainer Size: 0.2
- Drain Type: Condensate
- Connection Size: 0.4
from Zurn Industries LLC
The P6-PS is a class A 6" stainless steel fabricated perforated grate. To view all options, see the Specification Sheet - 6" Wide Grates/Covers [See More]
- Body Material: Stainless
- Connection Size: 6.0
from Galco Industrial Electronics
Breather/Drain, M25, Stainless Steel [See More]
- Body Material: Stainless
from Armstrong International
Free-Floating Guided Lever Drain Traps. For loads to 9,500 lb/hr (4309 kg/hr) . . . Pressures to 570 psig (39 bar). Armstrong's stainless steel, free-floating guided lever drain traps use the same bodies, caps, lever mechanisms, valves and seats as Armstrong inverted bucket steam traps that have... [See More]
- Body Material: Stainless
- Connection Size: 0.8
- Drain Type: Condensate
- Shape: Round
from Eric'sons Dura Trench
18 inch wide stainless trench drain. 18 ″ wide interior trench drains can be sloped from 4 ″ to 18 ″ deep typical. Typically used for flows up to 15 cfs (6,725 gpm). Comes complete with installation brackets, plywood covers, end plates and outlets. Accepts any of the 20 ″... [See More]
- Body Material: Stainless
- Strainer Size: 18.0
- Drain Type: Trench
from Watts
Watts Drainage RD-950 round fabricated Type 304 stainless steel downspout cover with securing flange, and secured perforated hinged strainer. [See More]
- Body Material: Stainless
- Shape: Round
from JORC Industrial LLC
The OPTIMUM-S Drain Assembly consists of a solid-state timer coupled to a solenoid valve and only requires a simple installation procedure. The unit is suitable for ALL compressed air system components (aftercoolers, dryers, filters, pressure vessels and piping), regardless of their size or capacity... [See More]
- Body Material: Stainless
- Connection Size: 0.2
- Drain Type: Condensate
- Shape: Round
from Zurn Industries LLC
The P6-PSR is a class A 6" stainless steel raised perforated grate. To view all options, see the Specification Sheet - 6" Wide Grates/Covers [See More]
- Body Material: Stainless
- Connection Size: 6.0
from Galco Industrial Electronics
Breather/Drain, M25, Stainless Steel [See More]
- Body Material: Stainless
from Armstrong International
180 Series Free-Floating Lever Drain Traps. For pressures to 400 psig (28 bar) . . . Capacities to 2,000 lb/hr (907 kg/hr). All-stainless steel for horizontal installation. Armstrong ’s stainless steel, free-floating guided lever drain traps use the same bodies, caps, lever mechanisms, valves... [See More]
- Body Material: Stainless
- Connection Size: 0.5
- Drain Type: Condensate
- Shape: Round
from Eric'sons Dura Trench
2 inch wide stainless slotted drain. 2 ″ wide interior slotted drain (slot drain) can be sloped from 3 ″ to 12 ″ deep typical. Typically used for flows up to 0.1 cfs (40 gpm). Comes complete with installation brackets, end plates and outlets. (contact us for pricing and... [See More]
- Body Material: Stainless
- Strainer Size: 2.0
from JORC Industrial LLC
The POD-DC removes condensate from compressed air systems without using electricity. The discharge process is automatic and is based on a 2/2 way level controlled valve principle that operates a direct cylinder valve. The POD-DC is ideally suited in applications where power is not available, too... [See More]
- Body Material: Stainless
- Connection Size: 0.5
- Drain Type: Condensate
- Shape: Round
from Zurn Industries LLC
The P6-RPSC is a class C 6" stainless steel reinforced perforated grate [See More]
- Body Material: Stainless
- Connection Size: 6.0
from Galco Industrial Electronics
Breather/Drain, 1/2in.NPT, Stainless [See More]
- Body Material: Stainless
from Armstrong International
Free-Floating Lever Dual Gravity Drain Traps. For pressures to 1,000 psig (69 bar). Armstrong free-floating lever dual gravity drain traps are identical to Armstrong ’s 2-LD, 3-LD and 6-LD, except float weights are modified to make them suitable for draining water from a light liquid. If you... [See More]
- Body Material: Cast Iron; Stainless
- Connection Size: 0.5 to 0.8
- Drain Type: Condensate
- Shape: Round
from Eric'sons Dura Trench
2 inch wide stainless trench drain. 2 ″ wide interior trench drain. Can be sloped from 2 ″ to 8 ″ deep typical. Typically used for flows up to 0.3 cfs (150 gpm). Comes complete with installation brackets, plywood covers, end plates and outlets. Accepts any of the 3 ″ wide... [See More]
- Body Material: Stainless
- Strainer Size: 2.0
- Drain Type: Trench
from JORC Industrial LLC
The new SMART GUARD PRO drain system uses state-of-the-art software in combination with a special transducer interface to measure the presence of condensate, volumetrically, 50 times per second. There is no loss of compressed air. Continuous monitoring insures fast, effective discharge of up to 60... [See More]
- Body Material: Stainless
- Connection Size: 0.5
- Drain Type: Condensate
- Shape: Round
from Zurn Industries LLC
The P6-RFSC is a 6" stainless steel reinforced slotted grate [See More]
- Body Material: Stainless
- Connection Size: 6.0
from Galco Industrial Electronics
DA 284 Vent Plug, M40 x 1.5, Stainless S [See More]
- Body Material: Stainless
from Armstrong International
High Leverage Spring-Loaded Ball Float Drain Traps. For low flows at pressures to 3,700 psi (255 bar) and specific gravity down to 0.40. The Armstrong high leverage series of liquid drain traps was developed especially for draining low-specific-gravity fluids from gases at high pressures. They use... [See More]
- Body Material: Stainless
- Connection Size: 0.5 to 1.5
- Drain Type: Condensate
- Shape: Round
from Eric'sons Dura Trench
24 inch wide stainless trench drain. 24 ″ wide interior trench drain. Can be sloped from 4 ″ to 18 ″ deep typical (contact us for pricing and availability on deeper depths). Typically used for flows up to 22.6 cfs (10,150 gpm). Comes complete with installation brackets, plywood... [See More]
- Body Material: Stainless
- Strainer Size: 24.0
- Drain Type: Trench
from Zurn Industries LLC
The P6-SBG is a class E 6" stainless steel slotted bar grate. To view all options, see the Specification Sheet - 6" Wide Grates/Covers [See More]
- Body Material: Stainless
- Connection Size: 6.0
from Armstrong International
Ultra-Capacity Drain Traps. Capacities to 700,000 lb/hr (317520 kg/hr) . . . Pressures to 450 psig (31 bar). Armstrong ultra-capacity ball float drain traps are designed to meet exceptionally large capacity needs in draining water and other liquids from air or other gases under pressure. [See More]
- Body Material: Ductile Iron; Stainless
- Connection Size: 2.0 to 3.0
- Drain Type: Condensate
- Shape: Round
from Eric'sons Dura Trench
4 inch wide stainless slotted drain. 4 ″ wide interior slotted drain. Can be sloped from 4 ″ to 12 ″ deep typical. Typically used for flows up to 0.3 cfs (125 gpm). Comes complete with installation brackets, end plates and outlets. (contact us for pricing and availability on deeper... [See More]
- Body Material: Stainless
- Strainer Size: 4.0
from Zurn Industries LLC
5" Round slab on grade floor drain, with stainless steel top, and ABS body with 2" x 3" solvent weld connection. Innovative EZ1 ™ technology simplifies product installation, including concrete shield for 1-1/4" of available vertical post pour adjustment, pre-packaged shims for tilt correction,... [See More]
- Body Material: ABS; Stainless
- Connection Size: 5.0
from Eric'sons Dura Trench
4 inch wide stainless trench drain. 4 ″ wide interior trench drain. Can be sloped from 2 ″ to 12 ″ deep typical (contact us for pricing and availability on deeper depths). A 4 inch wide stainless steel trench drain is typically used for flows up to 1.5 cfs (700 gpm). Comes complete... [See More]
- Body Material: Stainless
- Strainer Size: 4.0
- Drain Type: Trench
from Zurn Industries LLC
5" round cleanout less cover includes ABS body with 2" x 3" solvent weld connection. Features And Benefits. Body Only. ABS solvent weld body with gas and water tight ABS tapered plug. Designed in accordance with ASME A112.36.2M [See More]
- Body Material: ABS; Stainless
- Features: Cleanout
- Connection Size: 2.0
from Eric'sons Dura Trench
6 inch wide stainless trench drain. 6 ″ wide interior trench drains can be sloped from 3 ″ to 12 ″ deep typical. Typically used for flows up to 3.9 cfs (1,750 gpm). Comes complete with installation brackets, plywood covers, end plates and outlets. Accepts any of the 8 ″ wide... [See More]
- Body Material: Stainless
- Strainer Size: 6.0
- Drain Type: Trench
from Zurn Industries LLC
5" round floor drain includes less strainer and ABS body with 2" x 3" solvent weld connection. Innovative EZ1 ™ technology simplifies product installation, including concrete shield for 1-1/4" of available vertical post-pour adjustment, prepackaged shims for tilt correction, stainless steel... [See More]
- Body Material: ABS; Stainless
- Connection Size: 2.0
from Eric'sons Dura Trench
8 inch wide stainless trench drain. 8 ″ wide interior trench drain. Can be sloped from 3 ″ to 12 ″ deep typical. Typically used for flows up to 6 cfs (2,775 gpm). Comes complete with installation brackets, plywood covers, end plates and outlets. Accepts any of the 10 ″ wide... [See More]
- Body Material: Stainless
- Strainer Size: 8.0
- Drain Type: Trench
from Zurn Industries LLC
5" square floor drain with nickel bronze strainer and ABS body with 3" x 4" solvent weld connection. Innovative EZ1 ™ technology simplifies product installation, including concrete shield for 1-1/4" of available vertical post-pour adjustment, prepackaged shims for tilt correction, integrally... [See More]
- Body Material: ABS; Stainless
- Connection Size: 5.0
from Eric'sons Dura Trench
Industrial & Food grade stainless steel clean out. Clean out is rated for forklift traffic. Interior clean out body has o-ring to seal top cover with internal threaded plug. The traffic rated stainless steel cover is secured with three screws. Outlet pipe can be ordered with 3 ″ or 4... [See More]
- Body Material: Stainless
from Zurn Industries LLC
5" square floor drain with stainless steel strainer and ABS body with 4" solvent weld connection. Innovative EZ1 ™ technology simplifies product installation, including concrete shield for 1-1/4" of available vertical post-pour adjustment, prepackaged shims for tilt correction, integrally... [See More]
- Body Material: ABS; Stainless
- Connection Size: 5.0
from Zurn Industries LLC
5" square floor drain with nickel bronze strainer and ABS body with 2" x 3" solvent weld connection and clamp collar. Innovative EZ1 ™ technology simplifies product installation, including concrete shield for 1-1/4" of available vertical post-pour adjustment, prepackaged shims for tilt... [See More]
- Body Material: ABS; Stainless
- Connection Size: 5.0
from Zurn Industries LLC
5" square floor drain with stainless steel strainer, clamp collar and ABS body with 4" solvent weld connection. Innovative EZ1 ™ technology simplifies product installation, including concrete shield for 1-1/4" of available vertical post-pour adjustment, prepackaged shims for tilt correction,... [See More]
- Body Material: ABS; Stainless
- Connection Size: 5.0
from Zurn Industries LLC
5" square floor drain with nickel bronze strainer and ABS body with 2" x 3" solvent weld connection. Innovative EZ1 ™ technology simplifies product installation, including concrete shield for 1-1/4" of available vertical post-pour adjustment, prepackaged shims for tilt correction, integrally... [See More]
- Body Material: ABS; Stainless
- Shape: Square/Rect
- Connection Size: 5.0
from Zurn Industries LLC
5" square floor drain with stainless steel strainer and ABS body with 2" x 3" solvent weld connection. Innovative EZ1 ™ technology simplifies product installation, including concrete shield for 1-1/4" of available vertical post-pour adjustment, prepackaged shims for tilt correction, integrally... [See More]
- Body Material: ABS; Stainless
- Shape: Square/Rect
- Connection Size: 5.0
from Zurn Industries LLC
5" square floor drain with stainless steel strainer and ABS body with 2" x 3" solvent weld connection and clamp collar. Innovative EZ1 ™ technology simplifies product installation, including concrete shield for 1-1/4" of available vertical post-pour adjustment, prepackaged shims for tilt... [See More]
- Body Material: ABS; Stainless
- Shape: Square/Rect
- Connection Size: 5.0
from Zurn Industries LLC
5" square floor drain with stainless steel strainer and ABS body with 4" solvent weld connection. Innovative EZ1 ™ technology simplifies product installation, including concrete shield for 1-1/4" of available vertical post-pour adjustment, prepackaged shims for tilt correction, integrally... [See More]
- Body Material: ABS; Stainless
- Connection Size: 5.0
from Zurn Industries LLC
5" square floor drain with stainless steel strainer, clamp collar and ABS body with 4" solvent weld connection. Innovative EZ1 ™ technology simplifies product installation, including concrete shield for 1-1/4" of available vertical post-pour adjustment, prepackaged shims for tilt correction,... [See More]
- Body Material: ABS; Stainless
- Connection Size: 5.0
from Zurn Industries LLC
5" square floor drain with stainless steel strainer, and PVC body with 4" solvent weld connection. Innovative EZ1 ™ technology simplifies product installation, including concrete shield for 1-1/4" of available vertical post-pour adjustment, prepackaged shims for tilt correction, integrally... [See More]
- Body Material: PVC; Stainless
- Connection Size: 5.0
from Zurn Industries LLC
5" square floor drain with stainless steel strainer, clamp collar and PVC body with 2" x 3" solvent weld connection. Innovative EZ1 ™ technology simplifies product installation, including concrete shield for 1-1/4" of available vertical post-pour adjustment, prepackaged shims for tilt... [See More]
- Body Material: PVC; Stainless
- Connection Size: 5.0
from Zurn Industries LLC
5" Round cleanout, with stainless steel top, and ABS body with 2" x 3" solvent weld connection. Innovative EZ1 ™ technology simplifies product installation, including concrete shield for 1-1/4" of available vertical post pour adjustment, pre-packaged shims for tilt correction, integrally... [See More]
- Body Material: ABS; Stainless
- Shape: Round
- Connection Size: 5.0
- Features: Cleanout
from Zurn Industries LLC
Stainless Steel non-adjustable square green roof drain box. To view all options, see the Specification Sheet - ZF110-S. Features And Benefits. Provides access and protection for green roof drains. Ensures proper installation. Solid cover comes standard, heel-proof grate options available. Multiple... [See More]
- Body Material: Stainless
- Drain Type: Roof
from Zurn Industries LLC
Zurn Z706-HDS 6 ” (152mm) wide reveal frame and grate system with type 304 stainless steel frame. To view all options, see the Specification Sheet - Z706-HDS. Features And Benefits. Heavy-duty frame. Co-plane straps to keep rails parallel. Longer standard length sections [See More]
- Body Material: Stainless
from Zurn Industries LLC
Zurn Z712-HDS 12 ” [305] wide reveal frame and grate system with stainless steel frame. Channels are 120" [3048] long with 12" [305] wide reveal and have an 8-1/2" [216] clear opening. Provided with standard RFS grate that locks down to frame for a secure fit. To view all options, see the... [See More]
- Body Material: Stainless