Products & Services
See also: Categories | Featured Products | Technical Articles | More Information-
Supplier: ProSoft Technology, Inc.
Description: The PROFIBUS DP Slave protocol driver supports the PROFIBUS V0 Slave implementation, providing powerful data transfer capability between the module and Scneider Electric Quantum and Unity processors. User configurable data mapping and DP port operation make the interface an easy to use
- Data Rate: 9.6 kbps
- Operating Temperature: 0.0 to 60 C
- Port Type: RS232
- Protocol / Network: PROFIBUS, Serial
-
Supplier: LAPP
Description: An EPIC® product from an EPIC company. High quality and durability are synonymous with the Lapp family of products, and the EPIC® line of connectors is no exception. Whether the application is power, control, or signal/data, EPIC® connectors offer performance you can count on
- Coupling / Adapter: Yes
- Current Rating: 4 amps
- Gender: Male / Plug, Female / Jack
- Geometry: Other
-
Supplier: VEGA Americas, Inc.
Description: Application area Profibus PA T-distributors are used for coupling of Profibus PA transmitters to the Profibus PA bus cable Your benefit Simple connection possibilities through star distributor via M12 plug connector or distribution terminal Optimized cable glands allow an
-
-
Supplier: LAPP
Description: EPIC® Data PROFIBUS connectors are fast connect, 9 pin D-Sub connectors with an integrated adjustable termination resistor. The cable entry is 35° angled. Connectors are available with additional programming/diagnost ic interface.
- Connector Type: DIN Connector, D-Sub, Rectangular Connectors, Heavy Duty
- Coupling / Adapter: Yes
- Current Rating: 12.5 amps
- Geometry: Other
-
Supplier: LAPP
Description: EPIC® Data PROFIBUS connectors are fast connect, 9 pin D-Sub connectors with an integrated adjustable termination resistor. The cable entry is 180°. Connectors are available with additional programming/diagnost ic interface.
- Connector Type: DIN Connector, D-Sub, Rectangular Connectors, Heavy Duty
- Coupling / Adapter: Yes
- Current Rating: 12 amps
- Geometry: Straight
-
Supplier: Mencom Corporation
Description: Profibus PA, Accessory, Male to Female "T" with Female drop, 4 Pole, 8A, Stainless Steel
- Connector Type: Circular / Cylindrical Connector
- Coupling / Adapter: Yes
- Current Rating: 4 amps
- Gender: Male / Plug, Female / Jack
-
Supplier: LAPP
Description: EPIC® Data PROFIBUS connectors are fast connect, 9 pin D-Sub connector with an integrated adjustable termination resistor. The cable entry is 90° angled. Connectors are available with additional programming/diagnost ic interface.
- Connector Type: DIN Connector, D-Sub, Rectangular Connectors, Heavy Duty
- Coupling / Adapter: Yes
- Current Rating: 12.5 amps
- Geometry: Right Angle
-
Supplier: Mencom Corporation
Description: Profibus PA, Accessory, Male to Female "T" with M12 Female drop, 4 Pole, 8A, Stainless Steel
- Connector Type: Circular / Cylindrical Connector
- Coupling / Adapter: Yes
- Current Rating: 4 amps
- Gender: Male / Plug, Female / Jack
-
Supplier: PHOENIX CONTACT USA
Description: D-SUB complete connector, for PROFIBUS, shell size 1, pin, spring-cage connection, shielded, IP67 degree of protection, gray
- Connector Type: D-Sub
- Contact Size (AWG): 18 to 26 AWG
- Current Rating: 1 amps
-
Supplier: Gefran
Description: The GFX4-PROFI module can be installed inside GFX4/GFXTERMO4 products and expands communication by means of the PROFIBUS DP protocol. The module has two communication channels: • the first channel is a serial port with Modbus RTU protocol, and connects a maximum of four GFX4/GFXTERMO4
-
Supplier: Mencom Corporation
Description: Profibus DP, Receptacle, 5 Pole, Male Straight, 4A, M12, PCB, Nickel Brass
- Applications: Residential / General-Purpose
- Current Rating: 4 amps
- Device Type: Receptacle / Outlet
- Grounding: Standard Grounding
-
Supplier: Mencom Corporation
Description: Profibus DP, Shielded, Receptacle, 5 Pole, Female Right Angle, 4A, M12, PCB, Nickel Brass
- Applications: Residential / General-Purpose
- Current Rating: 4 amps
- Device Type: Receptacle / Outlet
- Grounding: Standard Grounding
-
Supplier: Pepperl+Fuchs SE
Description: PROFIBUS Sub-D Connector with switchable terminal resistance
-
Supplier: Automation24, Inc.
Description: Distributor RS PB-DP T - 8800040000 from Weidmüller for PROFIBUS-DP enables the user to connect it conveniently in the electrical cabinet. Weidmüller RS PB-DP T - 8800040000 can be mounted on TS32/35 rails and used to connect standardised PROFIBUS-DP lines. Spur lines can
- Operating Temperature: 0.0 to 55 C
- Terminal Block Type: Other
-
Supplier: PHOENIX CONTACT USA
Description: D-SUB connector, contact inserts: x , degree of protection: IP67, number of positions: 9, material: PA, connection method: Screw connection, connection cross section: AWG 26- 16, cable outlet: Angled, with integrated termination resistor, size of housing: 1, color: black
- Connector Type: D-Sub
- Contact Size (AWG): 16 to 26 AWG
-
Supplier: PHOENIX CONTACT USA
Description: D-SUB connector, contact inserts: x , degree of protection: IP67, number of positions: 9, material: PA, connection method: Screw connection, connection cross section: AWG 26- 16, cable outlet: Angled, with integrated termination resistor, size of housing: 1, color: gray
- Connector Type: D-Sub
- Contact Size (AWG): 18 to 26 AWG
- Current Rating: 1 amps
-
Supplier: Mueller Group, Inc. (The)
Description: PROFIBUS-PVC or PROFIBUS-PUR are field bus cables that connect digital field devices at the sensor/actuator level to the higher level components. Used for linking industrial field bus systems in automation and communication technology. The stationary PVC and high flex
- Product Category: Bulk Cable
- Rated Voltage: 0.2500 kilovolts
- Standards: RoHS, CSA Mark, CE Marking, UL Recognized Component Mark (US and Canadian)
-
Supplier: Sensata Technologies
Description: supply Standard resolution : 8192 points per revolution (13 bits resolution) High resolution available in option: 65 536 points par revolution (16 bits resolution) Turns numerisation up to 65 536 (16 bits) Connection via M12 connectors D PV0, Class 2, encoder profile 3.062 PHM5 also available
- Maximum Mechanical Shaft Speed: 6000 rpm
- Multi-Turn: Yes
- Operating Temperature: -4 to 185 F
- Rotor Inertia: 1.42E-4 oz-in-sec²
-
Supplier: Softing Industrial Automation GmbH
Description: configured via the respective PROFIBUS DP master by means of the SPI 3 GSE file. The PROFIBUS IO range can be flexibly configured. The SPI 3 is suitable for simple applications, such as connecting text displays or barcode scanners, as well as for more complex applications such
- Data Rate: 0.0120 Gbps
- Number of Ports: 2 #
-
Supplier: Softing Industrial Automation GmbH
Description: fits in any laptop bag High-retention USB connector ensures reliable USB cable connection Wide Area of Application Device parameterization via FDT/DTM Integrated with numerous parameterization and asset management systems PROFIBUS connection
- Number of Ports: 1 #
-
Supplier: Allied Electronics, Inc.
Description: PHOENIX CONTACT's SUBCON product provides a means to make D-SUB cable assemblies without the hassle of soldering or crimping. The SUBCON product provides connection from the pins of a D-SUB connector to individual screw actuated terminal blocks all in a D-SUB clamshell housing. This
-
Supplier: Real Time Automation, Inc.
Description: The 460MSPBS moves data between a Modbus TCP/IP client device and a PROFIBUS controller device. With the 460MSPBS, you are making a direct connection between Modbus TCP/IP client data and user-defined slots in your PROFIBUS device. Comes with panel mount. Fully configurable Modbus
-
Supplier: Real Time Automation, Inc.
Description: The 460PBSA moves data between a PROFIBUS master device and serial ASCII. It's a great tool to implement PROFIBUS devices into your PC or embedded applications that support raw ASCII data. Comes with panel mount. Fully configurable PROFIBUS slave Supports 244 bytes of data
- Equipment Type: Gateway
-
Supplier: Belden Inc.
Description: Interface converter electrical/optical for PROFIBUS-field bus networks; repeater function; for quartz glass FO
-
Supplier: Broadcom Inc.
Description: connector port. The receivers are easily identified by the dark grey colored connector port. The package is designed for auto-insertion and wave soldering so it is ideal for high volume production applications.
- Cable Type: Single Mode
- Data Rate: 0.0800 Gbps
- Light Source: Laser Diode
- Operating Temperature: 14 to 185 F
-
Supplier: Broadcom Inc.
Description: connector port. The receivers are easily identified by the dark grey colored connector port. The package is designed for auto-insertion and wave soldering so it is ideal for high volume production applications.
- Cable Type: Multimode
- Connector Type: ST
- Data Rate: 80 Mbps
- Operating Temperature: -40 to 185 F
-
Supplier: Broadcom Inc.
Description: . Features Evaluation Kit includes: HFBR-1515BZ/2515BZ Eval Board 1pc of 1m HCS terminated with ST connectors at both end HFBR-1515BZ/2515BZ Datasheet HFBR-0539Z User Guide
- Category: Development Suite / Kit
-
Supplier: L-com, Inc.
Description: The L-com FOACCVSPESC020 is a RS485 to duplex SC connector fiber media supporting a 2km reach over multimode fiber, operating at 1310nm supporting Profibus. The FOACCVSPESC020 features 12/24/48VDC Redundant dual power Inputs and is Protocol transparent, suitable for PROFIBUS and
- Full Duplex: Yes
- Primary Network: RS232/422/485
-
Supplier: Belden Inc.
Description: LioN-M M12-60, Plastic, PROFIBUS, M12 Bus Connector, B-coded, 16 DI, 7/8" Power Supply, 5-poles
-
Supplier: Belden Inc.
Description: PROFIBUS Data Receptacle Connector: Male, front mount, M12 - mating side, print contacts - connecting side, 5-pin, B-coded, unshielded, metallic grey housing, 50 V AC / 60 V DC, 4 A
- Current Rating: 4 amps
- Gender: Male / Plug, Female / Jack
- Voltage Rating: 50 to 60 volts
-
Supplier: Hymark/Kentucky Gauge
Description: Profibus and CANopen encoder Stainless steel housing suitable for food industry Connection cap with M12 connectors Position & velocity output
- Diameter or Width: 2.28 inch
- Electrical Output and Interface: PROFIBUS®, Other
- Maximum Mechanical Shaft Speed: 6000 rpm
- Operating Temperature: -13 to 185 F
-
Supplier: Lika Electronic
Description: Profibus and CANopen encoder Stainless steel housing suitable for food industry Connection cap with M12 connectors Position & velocity output
- Accuracy: 144 arcsec
- Diameter or Width: 2.28 inch
- Electrical Output and Interface: PROFIBUS®, Other
- Maximum Mechanical Shaft Speed: 6000 rpm
-
Supplier: ifm electronic gmbh
Description: High protection rating for the requirements of harsh industrial environments Permanent, reliable sealing even when mounted without tools Wide operating temperature range Good electromagnetic compatibility thanks to shielded cable
- Operating Temperature: -40 to 70 C
- Product Type: PROFIBUS
- Rated Amperage: 4 amps
- Rated Voltage: 0.0300 to 0.0360 kilovolts
-
Supplier: Lapp Tannehill
Description: . LAPP part number PB4110145S02 MANUFACTURER : LAPP MANUFACTURER PART NUMBER : PB4110145S02 AVAILABILITY : Contact 800-633-6339 for Availability TYPE : Bus SERIES : UNITRONIC® PROFIBUS Cordsets CONNECTORS : M12 Male / D-sub Node NUMBER OF POSITIONS : 5 LENGTH : 2m (6.56ft) CONTACT
- Application: Computer Cable
- Cable Length: 6.56 ft
- Cable Shielding: Braid, Foil Braid, Other
- Connector Type: Other
-
Supplier: Lapp Tannehill
Description: . LAPP part number PB4110140S05 MANUFACTURER : LAPP MANUFACTURER PART NUMBER : PB4110140S05 AVAILABILITY : Contact 800-633-6339 for Availability TYPE : Bus SERIES : UNITRONIC® PROFIBUS Cordsets CONNECTORS : Wire Leads / D-sub Terminator NUMBER OF POSITIONS : 5 LENGTH : 5m (16.4ft
- Product Category: Cable Assembly
- Standards: Other
Find Suppliers by Category Top
Featured Products Top
-
This module is GY sensor conditioning module for IRD series. 1 axis and 2 axes types are available. The digital position data can be transferred to various fieldbus network (CC-Link, PROFIBUS, EtherNet/IP, EtherCAT) by connecting IRDM (master module). (read more)
Browse Programmable Logic Controllers (PLC) Datasheets for Exsenco, LLC -
kinds of industrial network are available for IRDM to interface with host system (CC-Link, CC-Link IE Field, EtherNet/IP, PROFIBUS, EtherCAT).Possible to connect GY sensor directly as position feedback and build up high performance position control system with 1μm resolution (read more)
Browse Servo Drives Datasheets for Exsenco, LLC -
-Glass thermal imaging camera can be applied to your container glass plant. Key Benefits: A native OPC UA (or an optional single gateway device) connects your NIR-B-2K-Glass camera to any PLC set-up including Profinet and profibus protocol (read more)
Browse Image Analysis Software Datasheets for AMETEK Land -
and Profibus PA & DP Improved noise filtering and dual phase flow capabilities Simplified set up and menu structure Siemens is proud to announce the release of process-optimizing advantages to their entire digital Coriolis flowmeter (read more)
Browse Flow Meters Datasheets for Siemens Process Instrumentation -
indicates flow rate, totalized flow along with temperature and has various industry standard communications output protocol options to connect to existing site systems. FCI’s ST80 Flow Meter is a high performance, rugged thermal dispersion technology air/gas flow meter that combines (read more)
Browse Mass Flow Meters and Controllers Datasheets for Fluid Components Intl. (FCI) -
. You could use an external function generator to create dynamic load conditions; however, a high-power electronic load connecting with a low power function generator adds complexity to a test setup. The function generator needs protection from the high voltage or high current that the load will be (read more)
Browse Electronic Loads and Load Banks Datasheets for EA Elektro-Automatik Inc.
Conduct Research Top
-
The Ups and Downs of Taking the Bus: Part Two
DP instrumentation and controls. Personnel experienced with the startup and commissioning of Profibus DP fieldbus systems were not available. Eventually, the problems were traced to wiring problems, such as improper connector and wire combinations. Profibus DP wiring requirements were not well
-
The Ups and Downs of Taking the Bus
. In contrast, Profibus DP requires that each device be wired in sequence with either a Profibus DP sub-D connector or a Euro type 5-pin connector. The installation of busbased instrumentation and controls resulted in a clean, uncluttered design because fewer wires, interface devices and controls
-
Various Interfaces for Rotary Encoders
via one cable. There is no need to connect each component with the master. The bus cable runs simply from one component to another. Specific protocols, such as Device Net, Can Bus, Profibus, Ethernet, etc. "organize" the communication between the bus components. Benefits: In addition to cost
-
The Ups and Downs of Taking the Bus
at the lowest level of the process control hierarchy; it is used to connect measurement and control equipment to the process controller. Conventional instrumentation and controls use a pair of wires for each device to carry analog signals for communication. In contrast, fieldbus instrumentation
-
Tales from the Front: Applying Fieldbus at Genzyme, Part 1
communications systems to connect sensors, actuators and control elements so that process control can be distributed across a Local Area Network, and processes controlled at the field level. Fieldbus standards took decades to take shape, and warring protocols are out there, including Foundation
More Information Top
-
http://www.automation.siemens.com/mcms/industrial-communication/en/support/ik-info/Documents/profn2_e.pdf
The outer and inner sheath are bonded together so that the FC underground cable can be fitted with all SIMATIC NET PROFIBUS connectors after removing the outer sheath.
-
ISA PROFIBUS PCKT GUD - Profibus, A Pocket Guide
Standard PROFIBUS connectors are available from many vendors containing both the terminating and biasing resistors.
-
http://www.automation.siemens.com/w2/efiles/pcs7/pdf/76/SIMATICPCS7_STPCS7_complete_English_2010-02.pdf
PROFIBUS connector with selectable terminating resistor .
-
communicate s7 - Entries - Industry Support - Siemens
… at the document attached, you will see what Siemens users do in this case: they use Profibus cable between the MPI port and the HMI control center, and at the CPU MPI interfaceside they use a Profibus connector with PG socket; this …
-
CP 5512 - Entries - Siemens Industry Online Support – Siemens AG
Actually it is required to use termination on both ends of a PROFIBUS Segment, so if your PROFIBUS Segment consists of two nodes, your CP 5512 and your CPU or Slave you should have PROFIBUS Connectors with Termination “on” on both ends.
-
OLM P11 OLM P12 - Entries - Siemens Industry Online Support – Siemens AG
And the second problem is when I insert the profibus connector (comes from pc) on OLM module the green led on the cp5611 card is off.
-
https://www.gelifesciences.com/gehcls_images/GELS/Related Content/Files/1348740925568/litdoc28956289_20121211123722.pdf
Remove the protective cap from the Profibus connector of the Master unit.4 .
-
http://www.automation.siemens.com/salesmaterial-as/brochure/en/brochure_simatic-et200_en.pdf?HTTPS=REDIR
It allows the PROFIBUS connector to be disconnected and connect- ed even under Ex conditions.
-
An approach for modelling communication networks in industrial control systems
An example: a device with a single Profibus connector would not accept a direct wire con- nection, because this would violate the rules for proper termi- nation - in contrast, an Ethernet RJ45 jack would not accept a T-style connector for obvious …
-
Alpha Wire - 6463 VI005 - Cable - Multiconductor - Allied Electronics
profibus connector ,up to 12Mbps,axial version, external integrated resistor .